May 2008 - Wine-bugs - list.winehq.org

[Bug 12187] New: Tabula Rasa - Missing textures on some models
by wine-bugs＠winehq.org 30 Jun '09

30 Jun '09

http://bugs.winehq.org/show_bug.cgi?id=12187 Summary: Tabula Rasa - Missing textures on some models Product: Wine Version: 0.9.58. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: trivial Priority: P5 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: onshin(a)yahoo.com Wine: 0.9.58 (Linux) Tabula Rasa: 1.5 (latest version at time of writing). Requires d3dx9_33.dll and must be run with /NoPatch switch The following models have missing textures under Wine - the entire model appears white (with the exception of the guards): - Maws (Found in Pools. One spawns just by the Snakepit dropship pad) - Flaregashers (These can be found to the west of Irendas Penal Colony in Plains or west of Raintree Thicket in Incline) - Male AFS guards * No texture at all when viewed from greater than ~35 meters * No helmet texture from any distance (These can be found in various bases, such as Fort Defiance in Plateau) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 5

[Bug 11576] New: FIFA 2008 Demo: nothing seen during gameplay
by wine-bugs＠winehq.org 30 Jun '09

30 Jun '09

http://bugs.winehq.org/show_bug.cgi?id=11576 Summary: FIFA 2008 Demo: nothing seen during gameplay Product: Wine Version: 0.9.54. Platform: PC OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: suawek(a)interia.eu Created an attachment (id=10746) --> (http://bugs.winehq.org/attachment.cgi?id=10746) Screenshot 1 FIFA 2008 Demo works very good. all menus, sounds and other things are OK. But when I try to start a match, the game loads, but after that the screen looks like shown on the screenshot. I am able to get into menu, which even during gameplay works perfectly. Also HUD is displayed properly. The same thing happens in FIFA 2008 (full version) even in practice mode. Attached screenshots show : 1 - movies before the match 2 - the match 3 - menu activated during the match My OS: Ubuntu 7.10 Graphic card: ATI Radeon 9600 (newest drivers from ATI website installed correctly) Wine: 0.9.54 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10

[Bug 11147] New: Stalker mouse movement
by wine-bugs＠winehq.org 30 Jun '09

30 Jun '09

http://bugs.winehq.org/show_bug.cgi?id=11147 Summary: Stalker mouse movement Product: Wine Version: 0.9.53. Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-dinput AssignedTo: wine-bugs(a)winehq.org ReportedBy: beast(a)plitka.mine.nu Since version 0.9.51, mouse in STALKER moves to left normal, to right at double speed. in other games all ok -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 21

[Bug 10873] New: Various display issues in/with Delphi
by wine-bugs＠winehq.org 30 Jun '09

30 Jun '09

http://bugs.winehq.org/show_bug.cgi?id=10873 Summary: Various display issues in/with Delphi Product: Wine Version: unspecified Platform: Other OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: wine-gui AssignedTo: wine-bugs(a)winehq.org ReportedBy: ionic(a)ionic.de Created an attachment (id=9765) --> (http://bugs.winehq.org/attachment.cgi?id=9765) Font size set to 12 in Delphi/WINE. Hey all, after the installation of Delphi worked without noteworthy problems, I am now experiencing a couple of issues with WINE drawing/printing things, which might be easily fixable due to the fact that they are just graphical problems. First one: in Delphi one can set various font sizes for elements like Labels, Panel and so on, which works fine in Windows. But WINE shows a strange behavior here: when changing from font size 12 to 14 WINE does nothing, whereas in Windows the font size really grows. Also, you could set the the size to 100 (I did for testing purposes in the screenshots), but WINE does not change any size but uses still the 12pt size, it seems that something is broken there within WINE. Well that's happening in the "designer" mode, but it seems to be the same on runtime, so I guess there might be also other applications hitting that bug with binary programs (Screenshots flagged with "Runtime") ... Second one: properties changed in the object inspector should be bold when they are not set to the default value. That's a nice feature which helps people to see which property *they* changed and makes it easy to revert bad decisions. However, WINE does not print them in bold font or anything This bug is not limited to object inspector though, NO fonts in Delphi's "design" mode are bold, even when set to that, but instead WINE ignores it, even in the compiled program later on. This does NOT hit the editor in Delphi which is able to show wonderful bold text. You can find plenty examples for this bug in the "Delphi-Size-xx" screenshots. Third issue: that is a little bit more complicated indeed and might not be easily to fix in contrast to the first ones. As you may or may not know (at least you will see it) Delphi has something like a box with verbose compiler messages at the bottom side of the editor. Now one can double click on the first message and the editor is jumping to that specific line where an error or a warning occured, setting the background of that line to red for better visibility. We fix that issue (or not ;)) and double click on the second entry in that box... this time the editor should jump to the second error line and so on, like above, but there are some problems with WINE. When clicking on the second entry the editor is NOT jumping to the second erratic line but to the first one and the first entry remains "activated"/highlighted in that box. It is possible to override/"fix" that behavior by clicking into that box one time and then selecting the entry one wants to have a closer look at and THAN double click on it/in the box. Well, as that might be possible, it's not very comfortable and not the default behavior and should be fixed as well. :) So that are my three points so far, I could not find any other bugs yet. ;) You will have some screenshots attached both with WINEs (version 0.9.51 with that little msi patch of truiken) behavior and the one under a natively running Windows (not on the same boxes, though, but that should not cause any problems) in the next comment. (By the way, why does Bugzilla allow only one attachment in the first Bug Commit?) -Ionic (The entries in the StringGrid you see there in two of the screenshots are just plain fiction; neither the names nor the attributes given there correspond to the reality. (I included this to prevent privacy legality actions.)) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 15

[Bug 13266] New: ArchiCad 11 installer: Crashes after extraction ( Java related?)
by wine-bugs＠winehq.org 19 Jun '09

19 Jun '09

http://bugs.winehq.org/show_bug.cgi?id=13266 Summary: ArchiCad 11 installer: Crashes after extraction (Java related?) Product: Wine Version: 1.0-rc1 Platform: PC URL: http://archicad.com/ OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: kopseng(a)stud.ntnu.no Created an attachment (id=13111) --> (http://bugs.winehq.org/attachment.cgi?id=13111) Output from running AC11-NOR.exe, and Setup.exe manually after extraction Trying to run the installer for ArchiCad 11, it fails after extraction. Going into the directory c:\windows\temp\ArchiCad 11, where the files were extracted, and starting up Setup.exe, if fails within a second with a page fault. Before Setup crashes, a "Installing Java Runtime" briefly flashes on screen. I can't read the output, but it might be Java related, seeing that the Java Runtime that comes with the demo also crashes (but that might be a whole other bug report). ArchiCad is java based, so the JRE install is vital. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 14

[Bug 12169] New: Supreme Commander: Black bar obscuring screen when fidelity >low
by wine-bugs＠winehq.org 19 Jun '09

19 Jun '09

http://bugs.winehq.org/show_bug.cgi?id=12169 Summary: Supreme Commander: Black bar obscuring screen when fidelity >low Product: Wine Version: 0.9.58. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: liquitsnake(a)gmx.net As soon as the fidelity is set from low to medium, there will be a black bar obscuring half of the screen (terrain textures, to be to the point) This seems to be somehow related to shadows. Enabling shadows to either low or medium settings results in the black bar shrinking from the upper half of the screen to only obscuring the upper right corner. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 12137] New: Test Drive: Unlimited slow performance
by wine-bugs＠winehq.org 19 Jun '09

19 Jun '09

http://bugs.winehq.org/show_bug.cgi?id=12137 Summary: Test Drive: Unlimited slow performance Product: Wine Version: 0.9.57. Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: greg87(a)online.de Created an attachment (id=11533) --> (http://bugs.winehq.org/attachment.cgi?id=11533) console log Gameplay is almost impossible. Guessing from the output in the console, its searching for suitable pixelformat. wine is 0.9.58 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 5

[Bug 11942] New: Trouble with actor's shadow in " Journey to the Center of the Earth"
by wine-bugs＠winehq.org 19 Jun '09

19 Jun '09

http://bugs.winehq.org/show_bug.cgi?id=11942 Summary: Trouble with actor's shadow in "Journey to the Center of the Earth" Product: Wine Version: 0.9.57. Platform: PC URL: http://www.journey-earth.com/data/eng/homepage_eng.htm OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: iliotropion2006(a)yandex.ru Created an attachment (id=11251) --> (http://bugs.winehq.org/attachment.cgi?id=11251) screenshot Actor's shadow displayed incorrectly since wine 0.9.57. In wine 0.9.56 it's OK. See screenshots. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 7

[Bug 10981] New: Anti-Grain Geometry GDI Demo does not run
by wine-bugs＠winehq.org 19 Jun '09

19 Jun '09

http://bugs.winehq.org/show_bug.cgi?id=10981 Summary: Anti-Grain Geometry GDI Demo does not run Product: Wine Version: 0.9.52. Platform: PC URL: http://www.antigrain.com/demo/index.html OS/Version: Linux Status: NEW Keywords: download, source Severity: normal Priority: P2 Component: wine-gdiplus AssignedTo: wine-bugs(a)winehq.org ReportedBy: thestig(a)google.com The Anti-Grain Geometry GDI Demo cannot run due to the following unimplemented gdiplus functions: GdipGraphicsClear (the one it actually crashes on) GdipFillEllipse GdipCreateAdjustableArrowCap GdipDrawImagePointRectI GdipCloneImage -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 7

[Bug 10551] New: When emulating Sprint-Layout the mouse doesn' t catch obercts
by wine-bugs＠winehq.org 19 Jun '09

19 Jun '09

http://bugs.winehq.org/show_bug.cgi?id=10551 Summary: When emulating Sprint-Layout the mouse doesn't catch obercts Product: Wine Version: 0.9.49. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P4 Component: wine-programs AssignedTo: wine-bugs(a)winehq.org ReportedBy: chiliov(a)yandex.ru Sprint Layout - a very good and simple CAD program for PCB design. On windows OS it works fine, but when emulated the mouse doesn't catch tracks, routes and pads. I must make a group with the mouse to move something, and that decreases the productivity a lot. Here's the Sprint-layout homepage: http://www.abacom-online.de/uk/html/sprint-layout.html See what you can do. Regards! -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 12