March 2009 - Wine-bugs - list.winehq.org

[Bug 13769] New: Extreme graphical glitches with Sim City 4 Deluxe harwdare rendering mode
by wine-bugs＠winehq.org 27 Jan '12

27 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=13769 Summary: Extreme graphical glitches with Sim City 4 Deluxe harwdare rendering mode Product: Wine Version: 1.0-rc4 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: authentec(a)gmail.com Created an attachment (id=13804) --> (http://bugs.winehq.org/attachment.cgi?id=13804) Whiteness in Sim City 4 Deluxe city view Sim City 4 installs and runs in software rendering mode but has severe graphical glitches in hardware rendering mode. In hardware mode fog/smoke is rendered in a blocky manner and the entire terrain is white so it is very difficult to distinguish anything. In addition, rendering performance is very slow in hardware mode. In software mode the game is very responsive. I have encountered this problem in release candidates 1-4. I was unable to install it at all using one of the 9.5x versions so overall there has been improvement. I have attached a screenshot of the city view which is most affected by the glitch. The cityscape is supposed to be mostly green and brown. Region view has blocky fog but no whiteness. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 22

[Bug 17008] New: .Net SP1 fails to install
by wine-bugs＠winehq.org 27 Jan '12

27 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=17008 Summary: .Net SP1 fails to install Product: Wine Version: 1.1.12 Platform: PC-x86-64 URL: http://www.microsoft.com/downloads/thankyou.aspx?familyI d=a8f5654f-088e-40b2-bbdb-a83353618b38&displayLang=en OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: jordan.w.bradley(a)gmail.com Created an attachment (id=18803) --> (http://bugs.winehq.org/attachment.cgi?id=18803) Error Log I'm trying to install .Net Framework Service Pack 1 and I get an error about being unable to parse something (see log). I've seen bug #13995 but I don't think its the same. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 7

[Bug 13801] New: Very slow text rendering in AutoCAD
by wine-bugs＠winehq.org 27 Jan '12

27 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=13801 Summary: Very slow text rendering in AutoCAD Product: Wine Version: 1.0-rc4 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: max(a)veneto.com Tested on AutoCAD 2005 and AutoCAD 2008, after installation following http://bugs.winehq.org/show_bug.cgi?id=13799 guidelines. Working on a drawing with many texts/quotes zooms/scrolls/pans becomes painfully slow. Bug concerns just texts, NOT images or other drawing elements. I suppose is a performance problem on gdi, but not sure about. Ciao Max -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 54

[Bug 10636] New: simcity 4 D3D 0.9.50 REGRESSION from 0.9.49
by wine-bugs＠winehq.org 27 Jan '12

27 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=10636 Summary: simcity 4 D3D 0.9.50 REGRESSION from 0.9.49 Product: Wine Version: 0.9.50. Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: wine-directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: mizvekov(a)gmail.com On 0.9.49, simcity 4 runs almost flawlessly. On 0.9.50, it becomes unplayable because the 3d objects become invisible, and only sometimes they flicker back visibly, but just for an instant. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 60

[Bug 17651] New: Haufe SteuerOffice: Installer crashes
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=17651 Summary: Haufe SteuerOffice: Installer crashes Product: Wine Version: 1.1.16 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: koesterreich(a)gmx.net Created an attachment (id=19837) --> (http://bugs.winehq.org/attachment.cgi?id=19837) log file Haufe SteuerOffice is a information database for the German tax law. The Installer pops up for some seconds, than wine crashes. Appending bzipped log, created using WINEDEBUG=+relay,+seh,+tid,+msgbox. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 7

[Bug 12283] New: Source Insight does not refresh the screen
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=12283 Summary: Source Insight does not refresh the screen Product: Wine Version: 0.9.58. Platform: Other OS/Version: other Status: NEW Keywords: download, regression Severity: normal Priority: P2 Component: winex11.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: scott(a)open-vote.org >From Launchpad: https://bugs.edge.launchpad.net/ubuntu/+source/wine/+bug/208853 I have installed Source Insight, v3.50.0058 (http://www.sourceinsight.com) under Wine (0.9.58-0ubuntu2) under Hardy Beta. Source Insight is a code editor and browser. You can install a time-limited copy if you want. Anyway, having used this under Wine under Ubuntu for 18 months, with only a couple of niggly problems, I decided to upgrade (by doing a wipe + fresh install) to Hardy Beta. Since then, Source Insight has exhibited major problems. These all centre around NOT refreshing the screen after things happen: (1) Opening a new source-file window and moving it. Also resizing an existing window. (2) Minimising and then maximising the Source Insight window itself. In both cases, the screen inside the Source Insight window does not refresh. Moving the window around the screen does nothing (except get a nice swirly pattern of a repeating window title-bar inside the window itself. The only way I have found to cure the problem and make the window refresh itself is to switch to the second workspace, wait a few seconds (until the window with the "Go to left workspace ..." pops up) and then switch back. THEN the window refreshes. Sometimes. If it does not, switch to the other workspace again and wait longer before switching back. This is on a Dell D620 with an nVidia "G72M [Quadro NVS 110M/GeForce Go 7300]" and a second Dell 2007FP display attached. I'm running the graphics in TwinView mode (which means a manually configured xorg.conf, attached [see launchpad]). Going to System -> Preferences -> Appearance -> Visual Effects shows that "None" is currently active. --- The problem seems a LOT worse when running with the two displays and with the Source Insight window on the second (non-laptop) display. When running in single-display mode (i.e. at home instead of work), the "new source file window" problem does not seem to occur so much. The "minimising/maximising" problem occurs all the time, whatever the display being used. --- I believe the last version this worked with for this user was 0.9.46 (the one that came with Ubuntu Gutsy). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 33

[Bug 15519] New: Soldier of Fortune 2
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=15519 Summary: Soldier of Fortune 2 Product: Wine Version: 1.0.0 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: christian_obst(a)gmx.de Does not get past the intro when starting the game. Instead, it falls back to the console that is shown in the beginning, complaining: FS_FOpenFileRead: name has a space (fonts/Creating STM %s... .fontdat) Note: this error message is generated by the game itself, not by wine. It is printed in "Soldier of Fortune 2 Console". -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 17344] New: Lightwave Screamernet: v9.6 fails to start with "gcore9.ll failed to initialize"
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=17344 Summary: Lightwave Screamernet: v9.6 fails to start with "gcore9.ll failed to initialize" Product: Wine Version: 1.1.14 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: philip(a)emcorp.force9.co.uk Created an attachment (id=19379) --> (http://bugs.winehq.org/attachment.cgi?id=19379) Debug trace (+relay,+seh,+tid) Overview: Attempting to run Newtek Lightwave Screamernet (LWSN.EXE) version 9.6 results in the following error message: err:module:attach_process_dlls "gcore9.dll" failed to initialize, aborting err:module:LdrInitializeThunk Main exe initialization for L"C:\\lwsn96\\lwsn.exe" failed, status c000001d Steps to reproduce: Kick off LWSN from the command line in mode 3, eg: wine C:/lwsn96/lwsn.exe -3 -cC:/lwsn96/Config -dC:/Content scenes/testscene.lws 1 1 1 Actual result: LSWN.EXE fails to start (error message above) Expected result: LWSN.EXE should load the Lightwave scene data, render a 3D image and save it. Build & Platform: Wine 1.1.14 on openSUSE 11.1 & openSUSE 11.0 Additional Info: Trial version of Lightwave 9.6 (which includes LWSN.EXE) available here: http://www.newtek.com/lightwave/lwtrial.php NOTE: All versions 9.x prior to 9.6 work fine with Wine 1.1.14 on openSUSE 11.0 & 11.1 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 13839] New: Steam hangs in SteamStartup() attempting to connect to servers
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=13839 Summary: Steam hangs in SteamStartup() attempting to connect to servers Product: Wine Version: 1.0-rc4 Platform: All OS/Version: Solaris Status: UNCONFIRMED Severity: normal Priority: P2 Component: winsock AssignedTo: wine-bugs(a)winehq.org ReportedBy: trisk+winehq(a)acm.jhu.edu Created an attachment (id=13899) --> (http://bugs.winehq.org/attachment.cgi?id=13899) Gzipped output of WINEDEBUG=trace+relay wine Steam.exe Running Steam results in strange behaviour on Solaris and OpenSolaris. When Steam is first installed (using either the current MSI installer or an older standalone installer), it successfully updates itself and automatically restarts. , On restart, it spews extensive messages to the console about connection attempts to all 100+ CSDS servers with latency. For example, the last couple of lines are: CellID: Connecting to 87.248.209.212:27031. . . CellID: Connect to 87.248.209.212:27031 took 110 MS CellID: !! Got Cell ID 2 from server 69.28.153.90:27031 It then makes no further progress and appears to hang. If interrupted with Ctrl-C, it displays a "SteamStartup() failed" messagebox before exiting. When started again, Steam.exe prints set of "CellID:" messages showing that is is connecting to a particular server, then blocks for at least a minute, then connects to a different server. This goes on indefinitely. I'm attaching a WINEDEBUG=trace+relay log (to reduce log size, this Steam instance was interrupted after about 30 seconds). I can't do WINEDEBUG=trace+all because it results in an error message from Steam about being unable to load SteamUI.dll. This seems to be a network related issue, but I'm not entirely certain. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 17

[Bug 15431] New: Problem with several Xservers
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=15431 Summary: Problem with several Xservers Product: Wine Version: CVS/GIT Platform: Other OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: lich(a)math.spbu.ru Created an attachment (id=16294) --> (http://bugs.winehq.org/attachment.cgi?id=16294) screenshot I have several Xservers with different geometry: :0 - real Xorg server - 1280x1024 :1 - vnc server (or Xnest) - 1024x768 If I run any wine app first time in smaller X (:1) and then on bigger X (:0), it gets corrupted outside 1024x768 region - exactly the size of smaller X. If I use wine virtual desktop feature (X server does not matter), this bug does not appear. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 11