August 2009 - Wine-bugs - list.winehq.org

[Bug 12401] New: Support junction points, i.e. DeviceIoCtl( FSCTL_SET_REPARSE_POINT/FSCTL_GET_REPARSE_POINT)
by wine-bugs＠winehq.org 07 Dec '25

07 Dec '25

http://bugs.winehq.org/show_bug.cgi?id=12401 Summary: Support junction points, i.e. DeviceIoCtl(FSCTL_SET_REPARSE_POINT/FSCTL_GET_REPARSE_PO INT) Product: Wine Version: CVS/GIT Platform: Other OS/Version: other Status: NEW Severity: normal Priority: P2 Component: ntdll AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com Junction points are one of Microsoft's answers to symlinks. Unix symlinks could be mapped into junction points. This would allow applications (e.g. Picasa) avoid following symlinks if they wanted to. Also, the .net 2 installer would be happier in winxp mode if wine supported junction points (see bug 10601): "The .NET 2.0 Framework installer checks if the target volume is NTFS filesystem type and then uses the FSCTL_SET_REPARSE_POINT ioctl (used for mount points and junctions) to create junction points for each registered assembly in Windows SxS directory to GAC assembly directory (link target). Basically the junction point is used to redirect access from one directory to another." Tommy Kho posted a patch to add a conformance test for getting and setting junction points, http://www.winehq.org/pipermail/wine-patches/2006-March/024956.html but it was not accepted. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 90

[Bug 16882] New: WMI core 1.5 installation hangs (needed for .NET 3.0 installer, WCF part), SECURITY_SERVICE_RID missing from service token group
by wine-bugs＠winehq.org 27 Nov '25

27 Nov '25

http://bugs.winehq.org/show_bug.cgi?id=16882 Summary: WMI core 1.5 installation hangs (needed for .NET 3.0 installer, WCF part), SECURITY_SERVICE_RID missing from service token group Product: Wine Version: 1.1.12 Platform: Other URL: http://www.microsoft.com/downloads/details.aspx?familyid =AFE41F46-E213-4CBF-9C5B-FBF236E0E875 OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: advapi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: focht(a)gmx.net Hello, after getting past bug 16879 one encounters this one. ---- Prerequisite: 1. clean WINEPREFIX 2. sh winetricks -q dotnet20 3. download .NET 3.0 Framework installer from: http://download.microsoft.com /download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe (sha1sum: a566bcd2ffffc3842a95adc57f7df3f8cd11577f) 4. export _SFX_CAB_SHUTDOWN_REQUEST=1 (workaround, see bug 9158) 5. wine ./dotnetfx3setup.exe It might take a while until all required packages are downloaded using BITS. Note: If you need to redo steps, backup the directory "dotnetfx304506.30" from "c:\\windows\\temp" to a different location, remove ~/.wine, copy "dotnetfx304506.30" again to "c:\\windows\\temp" to prevent BITS from downloading over and over again. ---- "c:\\windows\\temp\\dd_dotnetfx3error.txt": --- snip --- [01/11/09,12:50:20] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603 [01/11/09,12:50:31] WapUI: [2] DepCheck indicates Windows Communication Foundation is not installed. [01/11/09,12:50:31] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed. --- snip --- "c:\\windows\\temp\\dd_wcf_retMSI597F.txt": --- snip --- 1: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe /r /x /y /v 2: 1: ERROR: Process returned non-0 value! CMDLINE: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe /r /x /y /v 2: 1: Failed 2: --- snip --- and "c:\\windows\\temp\\dd_wcf_retCA69A1.txt": --- snip --- === Verbose logging started: 1/11/2009 12:50:17 Calling process: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe === ServiceModelReg [12:50:18:302]: Warning: Could not detect IIS installation or IIS is disabled, skipping the Web Host Script Mappings component since it depends upon IIS to function properly. If you believe this message is an error, check your IIS installation to make sure it is installed properly. ServiceModelReg [12:50:18:329]: Information: The ServiceModelReg tool will take the following actions: Reinstalling configuration section system.serviceModel to C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. Reinstalling configuration section system.runtime.serialization to C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. Reinstalling configuration section system.serviceModel.activation to C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. Adding configuration entry for BuildProvider: System.ServiceModel.Activation.ServiceBuildProvider, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Reinstalling compilation assembly node to System.Web section group: System.Runtime.Serialization, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL Reinstalling compilation assembly node to System.Web section group: System.IdentityModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitectur... ServiceModelReg [12:50:18:358]: Uninstalling: Machine.config Section Groups and Handlers ServiceModelReg [12:50:18:366]: Warning: Configuration section system.serviceModel does not exist in C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. ServiceModelReg [12:50:18:369]: Warning: Configuration section system.runtime.serialization does not exist in C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. ServiceModelReg [12:50:18:373]: Warning: Configuration section system.serviceModel.activation does not exist in C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. ServiceModelReg [12:50:18:374]: Installing: Machine.config Section Groups and Handlers ServiceModelReg [12:50:18:893]: Uninstalling: System.Web Build Provider ServiceModelReg [12:50:19:095]: Warning: A configuration entry for BuildProvider System.ServiceModel.Activation.ServiceBuildProvider, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 does not exist. ServiceModelReg [12:50:19:096]: Installing: System.Web Build Provider ServiceModelReg [12:50:19:138]: Uninstalling: System.Web Compilation Assemblies ServiceModelReg [12:50:19:153]: Warning: All compilation assembly nodes do not exist in System.Web section group. ServiceModelReg [12:50:19:154]: Installing: System.Web Compilation Assemblies ServiceModelReg [12:50:19:246]: Uninstalling: HTTP Handlers ServiceModelReg [12:50:19:260]: Warning: HttpHandlers node *.svc does not exist in System.Web section group. ServiceModelReg [12:50:19:261]: Installing: HTTP Handlers ServiceModelReg [12:50:19:322]: Uninstalling: HTTP Modules ServiceModelReg [12:50:19:333]: Warning: HttpModules node ServiceModel does not exist in System.Web section group. ServiceModelReg [12:50:19:334]: Installing: HTTP Modules ServiceModelReg [12:50:19:365]: Repairing: WMI Classes ServiceModelReg [12:50:19:396]: Warning: Failure executing "C:\windows\system32\wbem\mofcomp.exe" with parameters ""C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModel.mof"": System.IO.FileNotFoundException: Could not load file or assembly 'C:\windows\system32\wbem\mofcomp.exe' or one of its dependencies. Exception from HRESULT: 0x80070002 File name: 'C:\windows\system32\wbem\mofcomp.exe' at System.ServiceModel.Install.InstallHelper.ExecuteWaitHelper(String program, String parameters) at System.ServiceModel.Install.InstallHelper.ExecuteWait(String program, String parameters, Int32[] allowedExitCodes) at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel outputLevel) ServiceModelReg [12:50:19:516]: System.InvalidCastException: Retrieving the COM class factory for component with CLSID {4590F811-1D3A-11D0-891F-00AA004B2E24} failed due to the following error: 80004002. at System.Management.ManagementScope.InitializeGuts(Object o) at System.Management.ManagementScope.Initialize() at System.Management.ManagementScope.Connect() at System.ServiceModel.Install.WmiInstallComponent.get_IsInstalled() at System.ServiceModel.Install.WmiInstallComponent.ApplyNamespaceDacl(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.Reinstall(OutputLevel outputLevel) at Microsoft.Tools.ServiceModel.ServiceModelReg.PerformAction(ActionItem actionItem, Nullable`1 confirmUninstall) at Microsoft.Tools.ServiceModel.ServiceModelReg.Run(String[] args) at Microsoft.Tools.ServiceModel.ServiceModelReg.TryRun(String[] args) === Verbose logging stopped: 1/11/2009 12:50:19 === --- snip --- Oh joy ... WMI. Providing fake mofcomp.exe (returning success) is not enough, WCF installer will try *use* WMI hence there needs to be some working infrastructure: --- snip --- ServiceModelReg [19:37:29:832]: Starting tool 'C:\windows\system32\wbem\mofcomp.exe' with parameters '"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModel.mof"'. ServiceModelReg [19:37:29:895]: ServiceModelReg [19:37:29:896]: ServiceModelReg [19:37:29:897]: Tool 'C:\windows\system32\wbem\mofcomp.exe' with parameters '"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModel.mof"' exited with code '0'. ServiceModelReg [19:37:29:955]: System.InvalidCastException: Retrieving the COM class factory for component with CLSID {4590F811-1D3A-11D0-891F-00AA004B2E24} failed due to the following error: 80004002. at System.Management.ManagementScope.InitializeGuts(Object o) at System.Management.ManagementScope.Initialize() at System.Management.ManagementScope.Connect() at System.ServiceModel.Install.WmiInstallComponent.get_IsInstalled() at System.ServiceModel.Install.WmiInstallComponent.ApplyNamespaceDacl(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.Reinstall(OutputLevel outputLevel) at Microsoft.Tools.ServiceModel.ServiceModelReg.PerformAction(ActionItem actionItem, Nullable`1 confirmUninstall) at Microsoft.Tools.ServiceModel.ServiceModelReg.Run(String[] args) at Microsoft.Tools.ServiceModel.ServiceModelReg.TryRun(String[] args) === Verbose logging stopped: 1/8/2009 19:37:29 === --- snip --- This is a big blocker and getting WMI to work with Wine is imperative for .NET 3.0 and higher. Of course this also useful for older .NET Frameworks Roll-back, prepare clean WINEPREFIX again;-) We need to install native WMI core 1.5 from: http://www.microsoft.com/downloads/details.aspx?familyid=AFE41F46-E213-4CBF… Download wmicore http://download.microsoft.com/download/platformsdk/wmicore/1.5/W9XNT4/EN-US… (sha1sum: f7a36668eb6c82a28393637ffdf0ec6e8adfa6a1) Make sure you set winver to NT 4.0 (don't forget to reset to default) and execute the installer (I already have my own winetricks step for this): --- snip --- wine wmicore.exe --- snip --- The installer will then hang at some point "Configuring repository". With winedbg one can see following processes: --- snip --- Wine-dbg>info process pid threads parent executable (all id:s are in hex) 0000000c 5 0000000a 'services.exe' 0000000f 1 0000000a 'explorer.exe' 0000001b 4 0000000c 'winedevice.exe' 00000025 1 00000000 'wmicore.exe' 00000027 2 00000025 'GLBbab.tmp' 00000022 4 0000000c 'WinMgmt.exe' --- snip --- The problem is "WinMgmt.exe" which ought to be a service but due to Wine insufficiency the service thinks it's a normal process not showing usual service process behaviour as registering control handler and the like. If you do 'wineserver -k' and try to start anything with Wine nothing will happen until wineboot times out... As quickfix, start regedit (wait until wineboot timeout) and set service start type key for "WinMgmt" to manual start, e.g. "2" -> "3". Also a kernel driver (service) that is installed with WMI "smbios" fails to load but this currently harmless. If we look now in "c:\\windows\\system32\\WBEM" we see the whole stuff installed. The logs in "logs" subdirs are not revealing much so we have to increase the log level: --- snip --- [HKEY_LOCAL_MACHINE\Software\Microsoft\WBEM\CIMOM] "Logging"="1" "Logging Directory"="C:\\windows\\system32\\WBEM\\Logs" --- snip --- LogLevel is 0 to turn off logging, a 1 to turn on logging, and a 2 for verbose logging. After that, we manually try to start the service: --- snip --- $ wine net start winmgmt err:winedevice:ServiceMain driver L"smbios" failed to load The Windows Management Instrumentation service is starting. fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),2,2,(nil),32,(nil)) - stub! fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),1,3,(nil),0,(nil)) - stub! fixme:advapi:RegisterEventSourceW (L"",L"WinMgmt"): stub wine: Call from 0x7b844f54 to unimplemented function ole32.dll.CoSwitchCallContext, aborting err:rpc:I_RpcReceive we got fault packet with status 0x80000100 fixme:ole:CoCreateInstance no instance created for interface {00000000-0000-0000-c000-000000000046} of class {8bc3f05e-d86b-11d0-a075-00c04fb68820}, hres is 0xc0000005 --- snip --- This is bug 7187 After fixing this problem, we repeat the whole stuff again to get this in logs: --- snip --- (Sun Jan 11 13:41:41 2009) : Starting WinMgmt, ProcID = 26, CmdLine = , User = focht(Sun Jan 11 13:41:41 2009) : WinMgmt bIsService = 0, return code from function determining if service = 0(Sun Jan 11 13:41:41 2009) : WinMgmt gbRunAsApp = 1(Sun Jan 11 13:41:41 2009) : Starting Initialize, ID = 26(Sun Jan 11 13:41:41 2009) : Registered class factory with flags: 0x15 (Sun Jan 11 13:41:41 2009) : RegOpenKey returned 0x2 while trying to open the transports node. Using default transports!(Sun Jan 11 13:41:41 2009) : Initialize complete(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=24, wParam=0, lParam=33f814(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=81, wParam=0, lParam=33fce8(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=83, wParam=0, lParam=33f974(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=1, wParam=0, lParam=33fce8(Sun Jan 11 13:41:41 2009) : Inside the waiting function --- snip --- "WinMgmt bIsService = 0" is the culprit. The process retrieves token information and checks if process token groups contain "SECURITY_INTERACTIVE_RID" (-> normal process) or "SECURITY_SERVICE_RID" (service process). I think it's actually services.exe that adds the SECURITY_SERVICE_RID sid to the newly created service process (token groups). This requires some infrastructure, including wineserver. I already quick-hacked a path to verify this and it works as expected, letting the service successfully start ;-) Regards -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 24

[Bug 15039] New: MSVC 6: Menu popdowns too narrow for arrows
by wine-bugs＠winehq.org 22 Nov '25

22 Nov '25

http://bugs.winehq.org/show_bug.cgi?id=15039 Summary: MSVC 6: Menu popdowns too narrow for arrows Product: Wine Version: 1.1.1 Platform: PC-x86-64 OS/Version: Linux Status: NEW Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: claus.fischer(a)clausfischer.com CC: claus.fischer(a)clausfischer.com Microsoft Visual C++ 6 is working to a large extent. When opening a menu of the developer studio, the menu items with arrows (that open submenus) are not displayed correctly. The triangular arrows on the right end will stick out of the menu popdown area. I'm not sure if they just stick out to the end of the "shadow" (3d effect) around the popdown, or sometimes more. They should be fully contained in the popdown area. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 23

[Bug 11268] New: Civilization I for Windows (16-bt) incorrectly displays some dialogues
by wine-bugs＠winehq.org 18 Nov '25

18 Nov '25

http://bugs.winehq.org/show_bug.cgi?id=11268 Summary: Civilization I for Windows (16-bt) incorrectly displays some dialogues Product: Wine Version: 0.9.53. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: gdi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: neptunia(a)mail.ru Some dialogue windows in the game have non-rendered areas near window border which display garbage/previous windows existed in this place. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 39

[Bug 14543] New: Worms World Party crashes on attempting to run
by wine-bugs＠winehq.org 18 Nov '25

18 Nov '25

http://bugs.winehq.org/show_bug.cgi?id=14543 Summary: Worms World Party crashes on attempting to run Product: Wine Version: 1.1.1 Platform: Other OS/Version: other Status: UNCONFIRMED Severity: trivial Priority: P2 Component: quartz AssignedTo: wine-bugs(a)winehq.org ReportedBy: Rincebrain(a)gmail.com Created an attachment (id=14883) --> (http://bugs.winehq.org/attachment.cgi?id=14883) Wine 1.1.1 output log (including BT) Worms World Party crashed when I attempted to run it - WWP fullscreened and rendered a black screen atop everything else, then Wine crashed, and sat at a backtrace until I killed wineserver. Wine output, including backtrace, attached. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 48

[Bug 11536] New: Worms World Party doesn't respond after match
by wine-bugs＠winehq.org 07 Nov '25

07 Nov '25

http://bugs.winehq.org/show_bug.cgi?id=11536 Summary: Worms World Party doesn't respond after match Product: Wine Version: 0.9.52. Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: rpgraca(a)gmail.com After most matches, like missions and deathmatch and in multiplayer games in the 3rd game, the game doesn't respond to mouse input and I only get beeps when I click on the window. This does't happen in multiplayer games whenever the final result 2-0 or 1-0. I get no stange message in the terminal. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 20

[Bug 10349] New: Yukon Trail installer crashes at the end
by wine-bugs＠winehq.org 31 Oct '25

31 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=10349 Summary: Yukon Trail installer crashes at the end Product: Wine Version: 0.9.48. Platform: Other OS/Version: other Status: UNCONFIRMED Severity: minor Priority: P2 Component: wine-misc AssignedTo: wine-bugs(a)winehq.org ReportedBy: echidnaman(a)gmail.com Created an attachment (id=9017) --> (http://bugs.winehq.org/attachment.cgi?id=9017) Crash Log After the Yukon Trail's installer is done installing, it crashes, taking the file browser it spawns with it. To reproduce: -Run installer -Complete installation -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

2 36

[Bug 14838] New: TMPDIR environment variable is not used at all
by wine-bugs＠winehq.org 30 Oct '25

30 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=14838 Summary: TMPDIR environment variable is not used at all Product: Wine Version: CVS/GIT Platform: PC URL: http://en.wikipedia.org/wiki/TMPDIR OS/Version: Linux Status: NEW Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: killertux(a)suomi24.fi Tested on Wine 1.1.2-307-g520ab5c Wine simply does not use TMPDIR environment variable and as far as I know Wine has never used this environment variable... it just defaults to /tmp -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 16

[Bug 9314] New: Borland C++ Builder 5 expects registry values to be read in the same order they were written
by wine-bugs＠winehq.org 28 Oct '25

28 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=9314 Summary: Borland C++ Builder 5 expects registry values to be read in the same order they were written Product: Wine Version: 0.9.43. Platform: PC-x86-64 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: wine-advapi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: mikolaj.zalewski(a)gmail.com Created an attachment (id=7584) --> (http://bugs.winehq.org/attachment.cgi?id=7584) test It arranges the component palettes in the same order in which it read the values from the registry (even if MSDN exlicitly says not to rely on the order in which the values are read). We store the values in the alphabetical order to binsearch them so the palettes under Wine are in alphabetical order instead of the configured order. I attach a small test showing that under Windows the values are read in the same order as they were written. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

2 20

[Bug 11995] New: Wipeout XL hangs at startup
by wine-bugs＠winehq.org 22 Oct '25

22 Oct '25

http://bugs.winehq.org/show_bug.cgi?id=11995 Summary: Wipeout XL hangs at startup Product: Wine Version: CVS/GIT Platform: Other URL: http://www.3dgamers.com/dlselect/games/wipeoutxl/wipeout xl.zip.html OS/Version: other Status: NEW Keywords: download Severity: normal Priority: P2 Component: winmm&mci AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com In http://jmikeneedham.dyndns.org/?p=10, a user complained that Psygnosis Wipeout XL hangs on startup. I confirmed this with the downloadable demo, http://www.3dgamers.com/dlselect/games/wipeoutxl/wipeoutxl.zip.html Name wipeoutxl.zip Size 6153701 sha1sum 5e420f8e79ac63e1e3bb76692dbfb0ae1caf1161 Looking at the log, it seems to be looping endlessly looking for an audio CD to be inserted. This was common practice back in the day; gamers would always throw an audio CD-ROM in the drive so they could listen to music while they played. Games often came on hybrid audio/data cds. When you insert a hybrid audio/data cd, though, you have to tell the system to mount the data portion, else wine won't give it a drive letter. So, if you jump through those hoops (e.g. insert a cd-rom and tell the system to mount it), the game will continue to the next problem: you can tell the game to start, and the welcome screen then goes away, but no game window comes up. The log shows: fixme:win:EnumDisplayDevicesW ((null),0,0x34f820,0x00000000), stub! fixme:xrandr:X11DRV_XRandR_SetCurrentMode Cannot change screen BPP from 32 to 8 err:xrandr:X11DRV_XRandR_SetCurrentMode Resolution change not successful -- perhaps display has changed? So I guess the next step is to try this on an 8 bit display. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13