August 2009 - Wine-bugs - list.winehq.org

[Bug 12283] New: Source Insight does not refresh the screen
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=12283 Summary: Source Insight does not refresh the screen Product: Wine Version: 0.9.58. Platform: Other OS/Version: other Status: NEW Keywords: download, regression Severity: normal Priority: P2 Component: winex11.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: scott(a)open-vote.org >From Launchpad: https://bugs.edge.launchpad.net/ubuntu/+source/wine/+bug/208853 I have installed Source Insight, v3.50.0058 (http://www.sourceinsight.com) under Wine (0.9.58-0ubuntu2) under Hardy Beta. Source Insight is a code editor and browser. You can install a time-limited copy if you want. Anyway, having used this under Wine under Ubuntu for 18 months, with only a couple of niggly problems, I decided to upgrade (by doing a wipe + fresh install) to Hardy Beta. Since then, Source Insight has exhibited major problems. These all centre around NOT refreshing the screen after things happen: (1) Opening a new source-file window and moving it. Also resizing an existing window. (2) Minimising and then maximising the Source Insight window itself. In both cases, the screen inside the Source Insight window does not refresh. Moving the window around the screen does nothing (except get a nice swirly pattern of a repeating window title-bar inside the window itself. The only way I have found to cure the problem and make the window refresh itself is to switch to the second workspace, wait a few seconds (until the window with the "Go to left workspace ..." pops up) and then switch back. THEN the window refreshes. Sometimes. If it does not, switch to the other workspace again and wait longer before switching back. This is on a Dell D620 with an nVidia "G72M [Quadro NVS 110M/GeForce Go 7300]" and a second Dell 2007FP display attached. I'm running the graphics in TwinView mode (which means a manually configured xorg.conf, attached [see launchpad]). Going to System -> Preferences -> Appearance -> Visual Effects shows that "None" is currently active. --- The problem seems a LOT worse when running with the two displays and with the Source Insight window on the second (non-laptop) display. When running in single-display mode (i.e. at home instead of work), the "new source file window" problem does not seem to occur so much. The "minimising/maximising" problem occurs all the time, whatever the display being used. --- I believe the last version this worked with for this user was 0.9.46 (the one that came with Ubuntu Gutsy). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 33

[Bug 15519] New: Soldier of Fortune 2
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=15519 Summary: Soldier of Fortune 2 Product: Wine Version: 1.0.0 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: christian_obst(a)gmx.de Does not get past the intro when starting the game. Instead, it falls back to the console that is shown in the beginning, complaining: FS_FOpenFileRead: name has a space (fonts/Creating STM %s... .fontdat) Note: this error message is generated by the game itself, not by wine. It is printed in "Soldier of Fortune 2 Console". -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 18804] New: WordPro's printed letters run occasionally run together
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=18804 Summary: WordPro's printed letters run occasionally run together Product: Wine Version: 1.1.23 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: ToddAndMargo(a)verizon.net Hi All, I am using Lotus Word Pro N9.8.0208.1200. My printer is an Okidata B4350 LED printer (like a laser printer only fewer moving parts and the fuser does have to get as hot). I print through cups cups-1.3.7-8.el5_3.4 locally and cups-lpd-1.3.7-8.el5_3.4 remotely (virtual machines) using cups' "Generic PCL 5e Printer Foomatic/ljet4" driver. Occasionally, when printing from Word Pro under Wine, the letters will run together. I will attach a sample and the file that generated it. Please note. No program in Linux or any of my virtual machines does this, including this same version of Word Pro running under XP-Pro-SP3 and Virtual Box 2.2.4. Many thanks, -T -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 18

[Bug 18552] New: Kompas-3D 10: icons are turned over
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=18552 Summary: Kompas-3D 10: icons are turned over Product: Wine Version: 1.1.21 Platform: Other URL: http://ascon.net/download/kompas/ OS/Version: other Status: UNCONFIRMED Severity: trivial Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: b0ntrict0r(a)yandex.ru Created an attachment (id=21214) --> (http://bugs.winehq.org/attachment.cgi?id=21214) Toolbar with incorrectly drawn icons Icons in menus, toolbars and tooltips in Kompas-3D 10 are turned over. I'm not using DLL submission in wine, program has ben run after removing .wine directory in $HOME. I don't know whether it's a regression. Demo version in English can be downloaded for free, but it's not exactly the same version that I'm using. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 6

[Bug 17344] New: Lightwave Screamernet: v9.6 fails to start with "gcore9.ll failed to initialize"
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=17344 Summary: Lightwave Screamernet: v9.6 fails to start with "gcore9.ll failed to initialize" Product: Wine Version: 1.1.14 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: philip(a)emcorp.force9.co.uk Created an attachment (id=19379) --> (http://bugs.winehq.org/attachment.cgi?id=19379) Debug trace (+relay,+seh,+tid) Overview: Attempting to run Newtek Lightwave Screamernet (LWSN.EXE) version 9.6 results in the following error message: err:module:attach_process_dlls "gcore9.dll" failed to initialize, aborting err:module:LdrInitializeThunk Main exe initialization for L"C:\\lwsn96\\lwsn.exe" failed, status c000001d Steps to reproduce: Kick off LWSN from the command line in mode 3, eg: wine C:/lwsn96/lwsn.exe -3 -cC:/lwsn96/Config -dC:/Content scenes/testscene.lws 1 1 1 Actual result: LSWN.EXE fails to start (error message above) Expected result: LWSN.EXE should load the Lightwave scene data, render a 3D image and save it. Build & Platform: Wine 1.1.14 on openSUSE 11.1 & openSUSE 11.0 Additional Info: Trial version of Lightwave 9.6 (which includes LWSN.EXE) available here: http://www.newtek.com/lightwave/lwtrial.php NOTE: All versions 9.x prior to 9.6 work fine with Wine 1.1.14 on openSUSE 11.0 & 11.1 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 19863] New: Counter Strike: Source goes blank and then goes garbled
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=19863 Summary: Counter Strike: Source goes blank and then goes garbled Product: Wine Version: 1.1.28 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: cokehabit(a)gmail.com Created an attachment (id=23292) --> (http://bugs.winehq.org/attachment.cgi?id=23292) console dump from the start of steam to killing the window When starting Counter Strike: Source from steam the game goes to the usual black full-screen but instead of going to the game it goes back in to a window and what appears to be a garbled mess of whatever was under the screen. That means that I have to kill the screen which then means I can't exit out of Steam in the proper manner because it thinks the game is still running. I have tried pressing the arrow buttons to listen to the telltale clicks that the game uses when you hover the cursor over an option but alas, nothing. Half Life 2 works like a charm though. Linux leviathon 2.6.30-gentoo-r2 #1 SMP PREEMPT Fri Jul 17 00:54:19 BST 2009 x86_64 Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz GenuineIntel GNU/Linux 6Gb of RAM, nVidia 6600GT (yes I know it's old), nvidia-drivers-185.18.31 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 11

[Bug 18898] New: Steam: EULA window is blank and unresponsive
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=18898 Summary: Steam: EULA window is blank and unresponsive Product: Wine Version: unspecified Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: shdocvw AssignedTo: wine-bugs(a)winehq.org ReportedBy: stonej4(a)mcmaster.ca Created an attachment (id=21740) --> (http://bugs.winehq.org/attachment.cgi?id=21740) Debug output from running Steam then running Unreal to get EULA Window The EULA window for Unreal and Unreal Tournament(possibly other apps) does not fill and becomes unresponsive bringing steam down with it. Debug output included. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10

[Bug 13839] New: Steam hangs in SteamStartup() attempting to connect to servers
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=13839 Summary: Steam hangs in SteamStartup() attempting to connect to servers Product: Wine Version: 1.0-rc4 Platform: All OS/Version: Solaris Status: UNCONFIRMED Severity: normal Priority: P2 Component: winsock AssignedTo: wine-bugs(a)winehq.org ReportedBy: trisk+winehq(a)acm.jhu.edu Created an attachment (id=13899) --> (http://bugs.winehq.org/attachment.cgi?id=13899) Gzipped output of WINEDEBUG=trace+relay wine Steam.exe Running Steam results in strange behaviour on Solaris and OpenSolaris. When Steam is first installed (using either the current MSI installer or an older standalone installer), it successfully updates itself and automatically restarts. , On restart, it spews extensive messages to the console about connection attempts to all 100+ CSDS servers with latency. For example, the last couple of lines are: CellID: Connecting to 87.248.209.212:27031. . . CellID: Connect to 87.248.209.212:27031 took 110 MS CellID: !! Got Cell ID 2 from server 69.28.153.90:27031 It then makes no further progress and appears to hang. If interrupted with Ctrl-C, it displays a "SteamStartup() failed" messagebox before exiting. When started again, Steam.exe prints set of "CellID:" messages showing that is is connecting to a particular server, then blocks for at least a minute, then connects to a different server. This goes on indefinitely. I'm attaching a WINEDEBUG=trace+relay log (to reduce log size, this Steam instance was interrupted after about 30 seconds). I can't do WINEDEBUG=trace+all because it results in an error message from Steam about being unable to load SteamUI.dll. This seems to be a network related issue, but I'm not entirely certain. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 17

[Bug 19207] New: eve online voice chat crappy audio
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=19207 Summary: eve online voice chat crappy audio Product: Wine Version: 1.1.25 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: pht(a)spatium.org whenever i try the echo test in eve voice i hear myself severely distorted as if parts of the speech haven't made it through or as if the game had problems with continuous sound recording. works fine on same hw in windows x64. some specs: - amd radeon4850 and proprietary driver v9.6 - quad core phenom with 4G ram (plenty of it free) - 64-bit kernel 2.6.28.10 with preemption off (tried it both/all three ways) - xorg server 1.6.1 - wine itself runs inside a chrooted 32bit arch linux (stock packages) - wine runs in a virtual desktop mode -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 11

[Bug 19354] New: Dreamweaver-Wine-MySQL
by wine-bugs＠winehq.org 23 Jan '12

23 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=19354 Summary: Dreamweaver-Wine-MySQL Product: WineHQ Apps Database Version: unspecified Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: appdb-unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: smeggingtommy(a)hotmail.com I've installed Dreamweaver MX OK, but no matter what I tried I cant get it to make a database connection because I get Access denied Huh I've created the database, added a user and password to the database in question. another fault is when testing the URL for localhost, I get Access to Z:\var\www\temp.html was denied I have apache2 installed so the path would be /var/www -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 11