January 2010 - Wine-bugs - list.winehq.org

[Bug 17195] New: NamedPipe datagrams need to be _really_ datagrams
by wine-bugs＠winehq.org 06 Jun '24

06 Jun '24

http://bugs.winehq.org/show_bug.cgi?id=17195 Summary: NamedPipe datagrams need to be _really_ datagrams Product: Wine Version: unspecified Platform: Other OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: ntdll AssignedTo: wine-bugs(a)winehq.org ReportedBy: lkcl(a)lkcl.net ok, after a little bit of investigation, i think i understand the pipes code enough to be able to say what's going on, and i'm seeing something like this: process 1: recvpipe = CreateNamedPipe("\\pipe\fred") ReadFile(recvpipe, buffer, &length); printf(length) ===> 43 ReadPipe(recvpipe, buffer, &length); /* no data */ process 2: sendpipe = CreateNamedPipe("\\pipe\fred") length = 9; WriteFile(sendpipe, buffer, &length); length = 34; WriteFile(sendpipe, buffer, &length); what's happening is that the data being sent down the pipes isn't being done as datagrams. the implementation is using a stream-based fd. the solution is: you _must_ implement a protocol on top of the pipes which sends the length (as a 32-bit int, whatever) which is read off the fd, followed by the data stream of _exactly_ that length. _must_. there's no two ways about this. the protocol of Pipes is unfortunately a combination of both datagrams and streams. datagrams because the lengths of data sent are absolute and inviolate. streams because the data order and reliability are _also_ absolute and inviolate. you can't use datagrams (because they're unreliable). you can't expect all unixen to support datagrams on top of unix sockets (if that's what's being used). so - you have to send the length, as part of the implementation of the pipe-data-send. sending a length will also solve the issue of trying to send zero-length pipe datagrams. as a first implementation, you _might_ be able to get away with assuming that when someone asks for some data, they _will_ provide a buffer big enough. ... actually... i don't see any ERR_MORE_DATA error codes in NtReadFile, so that would explain... this is going to get messy :) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 241

[Bug 13076] New: untangle: resize fails
by wine-bugs＠winehq.org 30 May '24

30 May '24

http://bugs.winehq.org/show_bug.cgi?id=13076 Summary: untangle: resize fails Product: Wine Version: 0.9.61. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: trivial Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: wine(a)wnoise.ofb.net After any of the games in Simon Tatham's portable puzzle collection is resized, it only redraws the portion of the window that is the original size. Under windows, these games rescale to fit in the new window size. These may all be downloaded at http://www.chiark.greenend.org.uk/~sgtatham/puzzles/ and have full source available. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 14

[Bug 16091] New: StickyDrive demo installer doesn't recognize USB key as removable
by wine-bugs＠winehq.org 27 May '24

27 May '24

http://bugs.winehq.org/show_bug.cgi?id=16091 Summary: StickyDrive demo installer doesn't recognize USB key as removable Product: Wine Version: 1.1.8 Platform: Other URL: http://mmiline.com/ OS/Version: other Status: NEW Keywords: download, Installer Severity: normal Priority: P2 Component: kernel32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com (From mmiline.com's main page, click on StickyDrive and then "Learn More", then under Red Sox demo, click "Download Now". This points to http://www2.stickyinc.com/download/getDownload.php?idTag=BOSTN-1668&action=… which downloads the installer in question, InstallStickyDrive-BOSTN-1668.exe.) The installer puts up a dialog box of drive letters, saying "Please select a valid removable drive...", but nothing is listed, even if you have a USB drive inserted and Wine has already created a d: mapping for it. If you click on the "Show all drives" checkbox, all drives are indeed shown. Happily for us, this dialog box is in a separate executable. While that prompt is up, grab a copy of C:\windows\temp\SDDriveSelector.exe You can then reproduce the problem easily by running just that .exe. +relay shows it's using GetDriveType() on each drive, but evidently it doesn't like what it's getting. You can work around this by using winecfg to mark d: as a floppy, but really, wine should know that the inserted USB drive is removable, shouldn't it? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 28

[Bug 13994] New: Dungeon Keeper 2 Demo does not start
by wine-bugs＠winehq.org 26 May '24

26 May '24

http://bugs.winehq.org/show_bug.cgi?id=13994 Summary: Dungeon Keeper 2 Demo does not start Product: Wine Version: 1.0.0 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: nowic(a)wenner.ch Created an attachment (id=14185) --> (http://bugs.winehq.org/attachment.cgi?id=14185) warn+all log The Dungeon Keeper 2 Demo does not start. Tested in Win 95, 98 and XP mode. Link: http://files.filefront.com/dungeonkeeper2demo/;928719;/fileinfo.html -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 19

[Bug 10531] New: Windows Calculator: Color in buttons missing
by wine-bugs＠winehq.org 19 May '24

19 May '24

http://bugs.winehq.org/show_bug.cgi?id=10531 Summary: Windows Calculator: Color in buttons missing Product: Wine Version: 0.9.49. Platform: Other OS/Version: other Status: UNCONFIRMED Severity: minor Priority: P2 Component: wine-misc AssignedTo: wine-bugs(a)winehq.org ReportedBy: bammzilla(a)gabriana.com Created an attachment (id=9282) --> (http://bugs.winehq.org/attachment.cgi?id=9282) How it looks in my Windows XP box In Windows Calculator CALC.EXE the button texts should be color coded but all appear black in Wine. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

2 37

[Bug 21316] New: MOPy Fish: Unable to allocate required memory, cannot continue.
by wine-bugs＠winehq.org 10 May '24

10 May '24

http://bugs.winehq.org/show_bug.cgi?id=21316 Summary: MOPy Fish: Unable to allocate required memory, cannot continue. Product: Wine Version: 1.1.35 Platform: x86-64 URL: http://www.mediafire.com/file/w13znjlvyko/setup-1.exe OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: gaming4jc2(a)yahoo.com This is classic MOPy Fish 1.9a, a free virtual pet for your computer. ( http://en.wikipedia.org/wiki/MOPy_fish ) It fails to start and gives no terminal output even when using winedbg. It simply says "process terminated". Url given for the free download. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 14

[Bug 19180] New: Race Driver GRID: Game freezes while restarting race
by wine-bugs＠winehq.org 05 May '24

05 May '24

http://bugs.winehq.org/show_bug.cgi?id=19180 Summary: Race Driver GRID: Game freezes while restarting race Product: Wine Version: 1.1.25 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: lukasz.wojnilowicz(a)gmail.com Created an attachment (id=22168) --> (http://bugs.winehq.org/attachment.cgi?id=22168) Wine-1.1.25 I'm using Wine 1.1.25 (compiled from source using gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) ) on Fedora 11 i386. When i try to restart race the game freezes. The Wine error window is showed but it's in background. The same problem is after finished race. This problem doesn't occur every time but its often and easy to catch. Sometimes I can restart the race every time without a freeze. I noticed that it's depended on game start where restarts will work every time /restarts won't work every time. I cut terminal output because this was repeating fixme:d3d_surface:IWineD3DBaseSurfaceImpl_Blt Filters not supported in software blit -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 12

[Bug 18816] New: Playing online does not work with World Of Goo
by wine-bugs＠winehq.org 05 May '24

05 May '24

http://bugs.winehq.org/show_bug.cgi?id=18816 Summary: Playing online does not work with World Of Goo Product: Wine Version: 1.1.23 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: brayden.hull(a)gmail.com When playing World Of Goo in latest development version of wine when you try to use the internet option to play it online it does not connect, in terminal it shows it sends a HTTP GET to a page but doesn't receive the response. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 12

[Bug 13198] New: Microsoft Pinball Arcade black/blank window in 24bpp mode
by wine-bugs＠winehq.org 03 May '24

03 May '24

http://bugs.winehq.org/show_bug.cgi?id=13198 Summary: Microsoft Pinball Arcade black/blank window in 24bpp mode Product: Wine Version: 1.0-rc1 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: vanessaezekowitz(a)gmail.com Created an attachment (id=13030) --> (http://bugs.winehq.org/attachment.cgi?id=13030) Screenshot of real 8bpp mode Microsoft Pinball Arcade (commercial/full version) doesn't work properly in WINE if you're using a regular, standard-issue 24bpp X session. Intro/menu screens work, but the 3D content (direct3d? ddraw?) just produces a black screen. Steps to reproduce: 0. Obtain a copy of the game (maybe the demo version will do?). cd into your 'drive c' directory and start the game: `wine Program\ Files/Microsoft\ Games/Pinball\ Arcade/Launcher.exe` 1. A movie displays showing a closeup of one of the game's tables. 2. Click on the movie to interrupt it. The title screen appears and looks fine. 3. Click again, table select menu appears and waits for input. 4. Click on any menu item at the bottom of the window - a dialog related to it appears as it should. 5. Double-click on one of the tables - the table selection screen gets blacked out, the window resizes, and the table's loading screen appears all in the same instant - without repainting the window - the loading screen only painted on the parts of the window that were already black. So we have a window half filled with the loading screen and half transparent, showing this browser and the controlling terminal through it. 6. The loading screen disappears and the window turns solid black. A windows pointer appears. On the console, the "Cannot change screen BPP" line appears. 7. Clicking around eventually causes the pointer to disappear, probably because I managed to trigger the insert-coin hot spot followed by the "1 player" hotspot, thus starting the actual game. Hitting Esc is supposed to bring up a graphical exit/no-exit dialog, but nothing appears. Blindly hitting "y" puts me back at the table-select screen as it should. So the actual game is accepting input, it just isn't showing me anything. 7a. If I try another table, I get the exact same result, including another "Cannot change screen BPP" line on the console. 8. Double-click the table-select menu's internal Exit button and Wine drops back to my shell after a couple of seconds. Actual Results: Described above - I get a black window instead of a game table. Expected Results: Wine should have displayed the table properly and let me play the game. Notes: In order to run this game properly, the user *must* have a true 8bpp mode with StaticColor visual defined in their xorg.conf, and the user *must* manually run a second, separate X screen (e.g. one accessible with Ctrl-Alt-F8) in that more with that visual. Desipte having a known, tested, working 8bpp mode in xorg.conf, Xorg does not have any kind of ability to switch away from the currently-running depth to some other mode (e.g. it cannot and never will be able to drop from 24bpp to 8bpp), and is not expected to ever have such a feature. Furthermore, some users' hardware does not have the ability to run in true 8bpp mode at all, so this game simply *will not work* on those systems. ply does not work on some hardware, despite having correct software settings. The attached screenshot shows what the game looks like in reap 8bpp "StaticColor" mode, using twm as a window manager (it looks the same without a window manager). Versions affected: All WINE versions from roughly 0.9.31 through the current 1.0 rc1 release. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 29

[Bug 18211] New: Toolbook Runtime 7.0 unhandled exception
by wine-bugs＠winehq.org 29 Apr '24

29 Apr '24

http://bugs.winehq.org/show_bug.cgi?id=18211 Summary: Toolbook Runtime 7.0 unhandled exception Product: Wine Version: 1.1.20 Platform: PC URL: ftp://ftp.sumtotalsystems.com/pub/tb2/neuron/70/neuron.e xe OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: kennybobs(a)o2.co.uk Created an attachment (id=20702) --> (http://bugs.winehq.org/attachment.cgi?id=20702) Wine 1.1.20 console output S197 How The Universe Works is part of a university course materials. S197 uses the Toolbook Runtime 7.0, but on calling the app, it immediately causes an unhandled page fault. Waiting a few minutes brings up a dialog stating, "Cannot find TB70NET.EXE (or one of its components)." S197 is designed specifically for this version and is included in the app's program folder, so upgrading to a newer version is not an option. Running TB70RUN.EXE directly causes the same page fault. To install TB7 directly, I had to set winecfg to Win95 mode. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13