December 2010 - Wine-bugs - list.winehq.org

[Bug 12178] New: wine 0.9.58 quicktime regression
by wine-bugs＠winehq.org 13 Apr '11

13 Apr '11

http://bugs.winehq.org/show_bug.cgi?id=12178 Summary: wine 0.9.58 quicktime regression Product: Wine Version: 0.9.58. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: weltall2(a)gmail.com Created an attachment (id=11575) --> (http://bugs.winehq.org/attachment.cgi?id=11575) console output I've just updated today to 0.9.58 from wine 0.9.57 using the official ubuntu repositories reported in the main page and i've found a regression regarding quicktime (7.4). At a first look the application seems to load fine but when i do file=>open file... and choose a quicktime movie (it was exported from keynote in mp4 and has points where the animation locks automatically waiting for the user to interact: that's why i can't use linux applications to see these... they don't support this) the quicktime window goes to the top left and after some seconds it closes itself. Running wine from command line reported an unhandled exception which wasn't there till last version. and the application seems to quit before the crash backtrace. As a side note the only way to make quicktime even launch (and work almost correcly till 0.9.57 except some gui glitches which are of little importance) is loading a native gdiplus.dll. attached is the console output. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 17935] New: an error occurred during the move data process 119
by wine-bugs＠winehq.org 13 Apr '11

13 Apr '11

http://bugs.winehq.org/show_bug.cgi?id=17935 Summary: an error occurred during the move data process 119 Product: Wine Version: unspecified Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P1 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: aurosara(a)yahoo.com Hi guys, Im trying to install Delat Translatior 3.0 in ubuntu 8.10/wine i having an error while installing the app the error message is : an error occurred during the move data process 119 can any body give a thought? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 5

[Bug 21771] New: Taxman 2010 CBE doesn't install
by wine-bugs＠winehq.org 13 Apr '11

13 Apr '11

http://bugs.winehq.org/show_bug.cgi?id=21771 Summary: Taxman 2010 CBE doesn't install Product: Wine Version: 1.1.38 Platform: x86 URL: http://www.lexware.de/shop/productDetails?orderNo=A088 32 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: wagnermaik(a)web.de Created an attachment (id=26327) --> (http://bugs.winehq.org/attachment.cgi?id=26327) Console output when trying to run Taxman 2010 CBE (Computerbild Edition) I am trying to install a German tax declaration program and can't get into the installer. The version I am trying to install is from a computer magazine DVD (Computerbild 5/2010) The error is linked to the "Visual C++ Runtime Library" and says that "the application has requested the Runtime to terminate in an unusual way" I have attached a log. Hope that helps. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 5

[Bug 18245] New: Polygon Love 2 - model shows up but doesn't have any animation
by wine-bugs＠winehq.org 13 Apr '11

13 Apr '11

http://bugs.winehq.org/show_bug.cgi?id=18245 Summary: Polygon Love 2 - model shows up but doesn't have any animation Product: Wine Version: 1.1.20 Platform: PC OS/Version: Windows XP Status: UNCONFIRMED Severity: minor Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: knight666(a)gmail.com Created an attachment (id=20756) --> (http://bugs.winehq.org/attachment.cgi?id=20756) A screenshot of the model standing with her arms wide First off, launching Polygon Love 2 from the command line is impossible, it crashes with the following output: knight666(a)Katja:~$ wine "/media/disk/Program Files/Purple Heart/Polygon Love 2/PL2.exe" fixme:d3d:IWineD3DImpl_FillGLCaps OpenGL implementation supports 32 vertex samplers and 32 total samplers fixme:d3d:IWineD3DImpl_FillGLCaps Expected vertex samplers + MAX_TEXTURES(=8) > combined_samplers fixme:win:EnumDisplayDevicesW ((null),0,0x32f830,0x00000000), stub! fixme:d3d:WineD3D_ChoosePixelFormat Add OpenGL context recreation support to SetDepthStencilSurface It is possible to launch the game by double clicking the exe. Once loaded, everything works as it's supposed to, but once you go in the dressing room, your character doesn't display any animation, and just stands there with her arms wide. I've attached a screenshot demonstrating the effect. Computer specs: - Wine 1.1.20 (latest version at time of writing) - Ubuntu 8.10 - 2.2 GHz AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ - 1 GB RAM - 128 MB (I think) nVidia Corporation GeForce 8600 GT -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 18292] New: Make 8.3 names for LFNs more "Windows-like"
by wine-bugs＠winehq.org 10 Apr '11

10 Apr '11

http://bugs.winehq.org/show_bug.cgi?id=18292 Summary: Make 8.3 names for LFNs more "Windows-like" Product: Wine Version: 1.1.20 Platform: PC URL: http://source.winehq.org/source/dlls/kernel32/path.c OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: kernel32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: kennybobs(a)o2.co.uk When Windows creates 8.3 names for long file names, it does so in the form Progra~1 and increments the number by one with each new creation of a similar filename. So, Program Files --> Progra~1 Programmers --> Progra~2 Program Blah blah --> Progra~3 and so on. Under Wine, the 8.3 filenames seem somewhat random (PROG~HAE for example). Is it possible to implement this behaviour? It would make it easier to guess short path names, which makes it easier to add paths to the registry (when needed for workarounds, for example). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 8

[Bug 22059] New: when /dev/input/event* device is accessible, wine fails to consider calibration and correction factors of the linux joydev driver
by wine-bugs＠winehq.org 10 Apr '11

10 Apr '11

http://bugs.winehq.org/show_bug.cgi?id=22059 Summary: when /dev/input/event* device is accessible, wine fails to consider calibration and correction factors of the linux joydev driver Product: Wine Version: 1.1.40 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-dinput AssignedTo: wine-bugs(a)winehq.org ReportedBy: corvus-wine(a)cybertrench.com Created an attachment (id=26862) --> (http://bugs.winehq.org/attachment.cgi?id=26862) joydev log with event file accessible Linux provides the possibility to correct joystick raw values automatically when accessing /dev/input/js* devices, both autodetected/scaled and "hand-calibrated" with tools like "jscal" if wine uses /dev/input/js* for joystick access, it also takes the correction factors into account, so a joystick that has been calibrated under linux, will be calibrated correctly under wine. However if the /dev/input/event* file corresponding to the joystick device is accessible (at least for reading) wine seems to bypass the joydev driver and accesses the device on a lower (event) level, thus unaware of the calibration data and correction factors - whether manually set and autodetected! As a result programs run under wine that use a joystick but offer no inbuilt calibration option (which is most, since under native win32 joysticks are calibrated system wide in the input device area of the control center) will behave strangely as joysticks are potentially off-centered - mis-scaled - axis flipped - or even unable to cross the zero position at all. Depending on the actual joystick hardware and the required corrections. the attached log1.txt shows the output of a joystick using program (il2fb flightsim) started with dinput WINEDEBIUG output grep'd for "joydev" when the event device is accessible (and the joystick is unusable due to miscalibration > WINEDEBUG=+dinput wine il2fb.exe 2>&1 |grep joydev log2.txt shows the same output with /dev/input/event5 (the joystick event device) chmodded to 000 in this case the axis and buttons are mapped completely different, but centered and scaled correctly (given that the jopystick had been calibrated under linux using jscal) for obvious reasons this bug is only visible if the axis values reported by the event device, especially min and max: ... > cur=97, min=0, max=255, fuzz=0, flat=15 ... are not equal to the actually reachable minimum and maximum values. newer joysticks often autoscale in hard/firmware and actually reach those min/max values with little need for calibration, while some, especially older models, are in dire need of correction values since the actual range (as in this case) is more like 30 to 120 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 5

[Bug 22212] New: Random Crashes in Sacred 2
by wine-bugs＠winehq.org 09 Apr '11

09 Apr '11

http://bugs.winehq.org/show_bug.cgi?id=22212 Summary: Random Crashes in Sacred 2 Product: Wine Version: 1.1.41 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: JakobRau(a)web.de When playing sacred 2. from time to time wine crashes (sometimes in game (singleplayer and LAN), sometimes in the menu). It does not happen too often, but it is still annoying. I am using Wine 1.1.41. on Ubuntu Lucid. I am starting the game like this: WINEPREFIX=~/.wine/sacred2 wine sacred2.exe WINEDEBUG=+relay wouldn't work, but I hope you can get some stuff out of the logfile anyway. If you can help me getting it to start with +relay, I will be happy to post the log. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 11

[Bug 24680] New: loader: segfault after loading krnl386.exe, while LoadLibraryEx for any buildin dll
by wine-bugs＠winehq.org 08 Apr '11

08 Apr '11

http://bugs.winehq.org/show_bug.cgi?id=24680 Summary: loader: segfault after loading krnl386.exe, while LoadLibraryEx for any buildin dll Product: Wine Version: 1.3.4 Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: loader AssignedTo: wine-bugs(a)winehq.org ReportedBy: wine.dev(a)web.de Created an attachment (id=31193) --> (http://bugs.winehq.org/attachment.cgi?id=31193) +loaddll,+process,+tid.txt Detected while testing https://answers.launchpad.net/ubuntu/+source/wine/+question/127977 When using "wine inetcpl.cpl" (or any other builtin dll: "wine gdi32.dll" as example), the referenced builtin dlls are loaded and a Segmentation fault occur after loading "krnl386.exe16" When loading a native dll, then no referenced dlls are loaded, and the error ".... gdi32.dll is a dll, not an executable") is printed to the console. No referenced dll must be loaded, as we have in ___wine_kernel_init: LoadLibraryExW( main_exe_name, 0, DONT_RESOLVE_DLL_REFERENCES ); After renaming "krnl386.exe16.so", the segfault does no longer occur and the expected message is visible on the terminal: 009:err:module:LdrInitializeThunk L"C:\\windows\\system32\\gdi32.dll" is a dll, not an executable The segfault is present on x86 and x86-64 (wine32) -- By by ... Detlef -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 4

[Bug 25301] New: Occasional sock_check_pollhup() error on Solaris
by wine-bugs＠winehq.org 08 Apr '11

08 Apr '11

http://bugs.winehq.org/show_bug.cgi?id=25301 Summary: Occasional sock_check_pollhup() error on Solaris Product: Wine Version: 1.3.7 Platform: x86 OS/Version: Solaris Status: NEW Severity: normal Priority: P2 Component: wineserver AssignedTo: wine-bugs(a)winehq.org ReportedBy: fgouget(a)codeweavers.com Created an attachment (id=32142) --> (http://bugs.winehq.org/attachment.cgi?id=32142) Additional sock_check_pollhup() traces On Solaris 10u5 I would sometimes get the following error: sock_init: ERROR in sock_check_pollhup() Apparently I'm not the only one since it's present in the log of bug 18334 (although that bug is about something else entirely). I have now found a way to reliably reproduce it on my system which is to run the following WineLib command: ./wine memtest.exe.so mmap 50 100 Of course make sure that the wine server is not running yet. The purpose of sock_check_pollhup() is to figure out what poll() does when a socket is closed. The error happens because the poll() call that immediately follows a shutdown() call returns no event. I then discovered that giving poll() a 1ms timeout fixes this problem although it still runs in 0.014 to 0.046ms. Note that strictly speaking poll() is allowed to return nothing when given a 0ms timeout: 'if timeout is 0, poll() returns immediately', which it does. Still it's annoying and could well be considered a poll() bug. The workaround seems ok though, especially since this is in code that's only invoked at startup. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 6

[Bug 20552] New: Memory leak in alloc_thread_tls?
by wine-bugs＠winehq.org 08 Apr '11

08 Apr '11

http://bugs.winehq.org/show_bug.cgi?id=20552 Summary: Memory leak in alloc_thread_tls? Product: Wine Version: 1.1.32 Platform: PC OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: ntdll AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com Valgrinding the chromium tests shows the leak 514 bytes in 2 blocks are definitely lost in loss record 796 of 971 by RtlAllocateHeap (heap.c:1421) by alloc_thread_tls (loader.c:889) by MODULE_DllThreadAttach (loader.c:1184) by start_thread (thread.c:464) on e.g. the following tests: ipc_tests: IPCChannelTest media_unittests: PipelineImplTest VideoRendererBaseTest WinAudioTest net_unittests: DirectoryListerTest ListenSocketTest ProxyScriptFetcherTest SingleThreadedProxyResolverTest TCPPingerTest TelnetServerTest URLRequestTestFTP URLRequestTestHTTP URLRequestTest To reproduce: mkdir demo cd demo wget -c http://kegel.com/wine/chromium/chromium-tests.tar.bz2 tar -xjvf chromium-tests.tar.bz2 valgrind --trace-children=yes --leak-check=full wine src/chrome/Debug/net_unittests.exe --gtest_filter=TCPPingerTest.Ping -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 4