May 2010 - Wine-bugs - list.winehq.org

[Bug 14743] New: DNS 9.5 install fails to extract cabinet: L"ENUGen~1.cab
by wine-bugs＠winehq.org 17 Aug '12

17 Aug '12

http://bugs.winehq.org/show_bug.cgi?id=14743 Summary: DNS 9.5 install fails to extract cabinet: L"ENUGen~1.cab Product: Wine Version: CVS/GIT Platform: PC URL: http://www.nuance.com OS/Version: other Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: susancragin(a)earthlink.net Created an attachment (id=15238) --> (http://bugs.winehq.org/attachment.cgi?id=15238) terminal output on installation DNS 9.5 does not install completely. The terminal output includes this: err:msi:msi_cabextract FDICopy failed err:msi:ACTION_InstallFiles Failed to extract cabinet: L"ENUGen~1.cab The ENUGen~1 file being referred to is large -- about 95MB. I believe the file includes the English language (sound) models, with the US regional accent. I also believe that it loads in conjunction with the grammar model file, which is ENGGen~1. (See attached screenshot with a list of the program's largest files.) The other similarly-named files are regional accent options. (SouthEast Asian, Australian, Indian and UK.) --------------------------- FWIW: Below is the total output when I try to run program. --------------------------- fixme:reg:RegSetKeySecurity :(0x64,4,0x379fd8): stub fixme:dbghelp:dump_system_info fill in CPU vendorID and feature set fixme:dbghelp:fetch_thread_info Couldn't open thread 142 (87) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 43

[Bug 22149] New: Memory leak in VB6 based program
by wine-bugs＠winehq.org 17 Aug '12

17 Aug '12

http://bugs.winehq.org/show_bug.cgi?id=22149 Summary: Memory leak in VB6 based program Product: Wine Version: 1.1.41 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: panton41(a)gmail.com GURPS Character Assistant (see AppDB) shows a memory leak which causes it to use increasingly more memory until the program slows until it's unusable. The program start at using 32MB and adds around 1MB for every time an item is edited (which is the entire point of the application and can happen hundreds of times). Around 150MBs the program becomes too slow to be usable and begins to display non-fatal error messages. Windows 7 64-bit shows a fairly consistent memory use of around 28MB. I'm too infrequent of a user to tell if its a regression or an entirely new bug. I switch between Linux and Windows often and there's sometimes months in between using the app on Wine. I have a feeling it's a regression, however, since I don't recall an increasing slow-down during my previous use. It uses riched20, riched32 and oleaut32 as native, builtin with font smoothing set to RGB if that helps connect it to other bugs at all. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 7

[Bug 17570] New: Can't build/install DPK files in Delphi 7.
by wine-bugs＠winehq.org 17 Aug '12

17 Aug '12

http://bugs.winehq.org/show_bug.cgi?id=17570 Summary: Can't build/install DPK files in Delphi 7. Product: Wine Version: 1.1.16 Platform: Other OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: jeff(a)storago.com When I am running Delphi 7 Professional under Wine 1.1.16, and I try to compile and install a .dpk (Package) file, Compile says "[Fatal Error] Could not create output file '(path_name_here)\Whatever.bpl'" although upon inspection a .bpl file has been created. If I try to go to "Component -> Install Packages" and check the box next to the package, Delphi says "Can't load package (path_name_here)\Whatever.bpl. Module not found." and won't actually let me activate it. If I delete out the files that have been compiled and try, it seemed possible at first to get a single package to install, but once I saved my project and re-open it later, it says it can't find it. Any project that requires more than one dpk file to be installed is therefore completely unable to be compiled because of this. It feels to me as though Delphi is failing on some sort of file_exists() check which aught to be very simple. I've checked all file permissions and even tried reconfiguring the BPL library paths to use folders without spaces i.e. "C:\Bpl" instead of "C:\Program Files\Borland\Delphi 7\Projects\Bpl" I'm quite familiar with Delphi's package system and can install packages without a problem on a similar Windows machine or virtual machine, this problem seems exclusive to wine. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 11

[Bug 16226] New: Office XP keeps reinstalling at program startup
by wine-bugs＠winehq.org 17 Aug '12

17 Aug '12

http://bugs.winehq.org/show_bug.cgi?id=16226 Summary: Office XP keeps reinstalling at program startup Product: Wine Version: CVS/GIT Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: msi AssignedTo: wine-bugs(a)winehq.org ReportedBy: alexis.deruelle(a)laposte.net Microsoft Office XP installs with no error, although each time I run WINWORD.EXE an installer window pops up and seems to (successfully) reinstall/re-register some components before displaying the main program window. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 18

[Bug 13436] New: Checkbox at finish screen is invisible unless checkbox is given focus
by wine-bugs＠winehq.org 17 Aug '12

17 Aug '12

http://bugs.winehq.org/show_bug.cgi?id=13436 Summary: Checkbox at finish screen is invisible unless checkbox is given focus Product: Wine Version: 1.0-rc2 Platform: PC URL: http://www.trendyflash.com/builder-trial/TrendyFlash- site-Builder-Trial.exe OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: nodisgod(a)yahoo.com After installing the TrendyFlash program, the wizard should show a checkbox at the finish screen, but the checkbox is shown invisibly unless focus is given. No relevant output was seen at the terminal. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 7

[Bug 21496] New: Xfire 1.120: Cannot login - page fault on write access
by wine-bugs＠winehq.org 17 Aug '12

17 Aug '12

http://bugs.winehq.org/show_bug.cgi?id=21496 Summary: Xfire 1.120: Cannot login - page fault on write access Product: Wine Version: 1.1.37 Platform: x86-64 URL: http://media.xfire.com/xfire/client/download/xfire_ins taller_41060.exe OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: gaming4jc2(a)yahoo.com Created an attachment (id=25890) --> (http://bugs.winehq.org/attachment.cgi?id=25890) Unhandled exception: page fault on write access to 0x33323236 in 32-bit code (0x04770234)... Xfire 1.120 crashes on login with a Unhandled exception: page fault on write access to 0x33323236 in 32-bit code (0x04770234). This was also an issue on 1.119 which I tested. Attached is log on normal run and then a winedbg to catch the page fault. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 7

[Bug 16580] New: S.T.A.L.K.E.R: sky not redrawn correctly with dynamic lighting
by wine-bugs＠winehq.org 17 Aug '12

17 Aug '12

http://bugs.winehq.org/show_bug.cgi?id=16580 Summary: S.T.A.L.K.E.R: sky not redrawn correctly with dynamic lighting Product: Wine Version: 1.1.11 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: default_357-line(a)yahoo.de Created an attachment (id=18097) --> (http://bugs.winehq.org/attachment.cgi?id=18097) S.T.A.L.K.E.R. SoC Sky bug When dynamic lighting is enabled on my GeForce Go 7900GS, the sky texture in STALKER SoC is not redrawn (all quality settings on minimum). No console output beside the usual "err:d3d:state_colorwrite (WINED3DRS_COLORWRITEENABLE1/2/3,0,0,0) not yet implemented. Missing of cap D3DPMISCCAPS_INDEPENDENTWRITEMASKS wasn't honored?". Screenshot attached. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 54

[Bug 10469] New: Radmin viewer 3.1: Mass selection of users does not work in the text chat mode
by wine-bugs＠winehq.org 17 Aug '12

17 Aug '12

http://bugs.winehq.org/show_bug.cgi?id=10469 Summary: Radmin viewer 3.1: Mass selection of users does not work in the text chat mode Product: Wine Version: 0.9.48. Platform: PC URL: http://www.famatech.com/download/rview31.exe OS/Version: Linux Status: UNCONFIRMED Severity: trivial Priority: P2 Component: wine-gui AssignedTo: wine-bugs(a)winehq.org ReportedBy: bugs.radmin(a)gmail.com We got an error: 1. Installed Radmin server 3.1 (http://www.famatech.com/download/rserv31.exe) on a windows computer. 2. Installed Radmin viewer 3.1 on a linux computer with wine installed. 3. Started Radmin viewer and connected to Radmin server in the "Text Chat" mode. Mass selection of users in user list with mouse cursor does not work. The error was tested on Fedora Core 7 installation with the last wine package from fedora update site (fedora_mirror/fedora/linux/updates/7/i386/). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10

[Bug 19936] New: Mother - haching simulation game
by wine-bugs＠winehq.org 17 Aug '12

17 Aug '12

http://bugs.winehq.org/show_bug.cgi?id=19936 Summary: Mother - haching simulation game Product: Wine Version: 1.1.23 Platform: PC URL: http://www.v4ldemar.net/mother/contents.php?section=do wnload OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: ruvolof(a)gmail.com Hi, The setup process works, but when I try to run this software I get: "Runtime error 216 a 0040418A" You can download the game from here: http://www.v4ldemar.net/mother/getfiles.php?file=mother-v1.0.exe thank you Francesco -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 19

[Bug 13868] New: Starlancer crashes with force feedback enabled
by wine-bugs＠winehq.org 17 Aug '12

17 Aug '12

http://bugs.winehq.org/show_bug.cgi?id=13868 Summary: Starlancer crashes with force feedback enabled Product: Wine Version: CVS/GIT Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-dinput AssignedTo: wine-bugs(a)winehq.org ReportedBy: jcarthew(a)mbarron.net I enabled force feedback in StarLancer and launched the game with wine Lancer.exe. When the game loads/runs it's fine until you get into a mission. The 3d scene loads fine and the audio plays but as soon as you begin to launch which normally causes a force feedback rumble effect the game crashes out to the command line. If you disable force feedback with the same joystick and rerun the game you can get into the mission fine and play it normally. The joystick is a Microsoft Sidewinder Force Feedback 2 and the force feedback drivers are enabled in the kernel as per the instructions on force feedback in wine. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 19