May 2013 - Wine-bugs - list.winehq.org

[Bug 32301] New: Magicka plain attack rendered incorrectly
by wine-bugs＠winehq.org 08 Sep '20

08 Sep '20

http://bugs.winehq.org/show_bug.cgi?id=32301 Bug #: 32301 Summary: Magicka plain attack rendered incorrectly Product: Wine Version: 1.5.17 Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: adys.wh(a)gmail.com Classification: Unclassified Screenshot attached -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 10

[Bug 23653] New: gmax crashes if you select opengl, wgl complains glBufferRegionEnabled missing from linux opengl?
by wine-bugs＠winehq.org 06 Sep '20

06 Sep '20

http://bugs.winehq.org/show_bug.cgi?id=23653 Summary: gmax crashes if you select opengl, wgl complains glBufferRegionEnabled missing from linux opengl? Product: Wine Version: 1.2-rc7 Platform: x86 URL: http://www.turbosquid.com/gmax OS/Version: Linux Status: NEW Keywords: download Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com http://forum.winehq.org/viewtopic.php?t=8984 mentioned that gmax crashes if you select opengl. Sure enough, after doing 'winetricks vcrun6' to work around bug 23652, the app runs unless you choose opengl. (I think you can choose opengl after the fact by editing gmax.ini to say GFXType=OpenGL but I'm not sure what else you might need to edit.) WINEDEBUG=+seh,+wgl shows trace:wgl:is_extension_supported Checking for extension 'GL_KTX_buffer_region' trace:wgl:wglGetProcAddress func: 'glBufferRegionEnabled' trace:wgl:wglGetProcAddress extension not found in the Linux OpenGL library, checking against libGL bug with glBufferRegionEnab.. warn:wgl:wglGetProcAddress Did not find function glBufferRegionEnabled (glBufferRegionEnabled) in your OpenGL library ! trace:seh:raise_exception code=c0000005 flags=0 addr=(nil) ip=00000000 tid=002b This is on a system with current nvidia hardware and proprietary drivers. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 25412] New: Shareaza does not save certain preferences [RE: Bug 14269]
by wine-bugs＠winehq.org 02 Sep '20

02 Sep '20

http://bugs.winehq.org/show_bug.cgi?id=25412 Summary: Shareaza does not save certain preferences [RE: Bug 14269] Product: Wine Version: 1.3.8 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: trapdoor6(a)gmail.com This is a similar issue as described in bug #14269 [still open] but it's related to different Wine versions: 1.3.8. I also noticed it on a few earlier developer and stable versions, I guess it's been never fixed in Wine. Please find details below: ------------------ Software: Shareaza project page: http://shareaza.sourceforge.net/ version: 2.5.3.0 Problem details: 1) Under 'Tools > Shareaza Settings > General > Library' option: 'Quick hashing (Uses more CPU)' Enabling it works only for one session. After restarting Shareaza it's disabled again. 2) Under 'Tools > Shareaza Settings > Networks > Gnutella' and '~ > eDonkey' option: 'Always connect to Gnutella / eDonkey' Enabling these won't be saved. After restarting Shareaza both are disabled again (which means that Shareaza connects only to Gnutella1 and I need to connect to the other networks manually in the 'Network' tab in the main window). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 18

[Bug 32326] New: DirectSound output in SNES9x gives crackling/glitchy audio
by wine-bugs＠winehq.org 30 Aug '20

30 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=32326 Bug #: 32326 Summary: DirectSound output in SNES9x gives crackling/glitchy audio Product: Wine Version: 1.5.18 Platform: x86-64 URL: http://files.ipherswipsite.com/snes9x/snes9x-1.53-win3 2.zip OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: directx-dsound AssignedTo: wine-bugs(a)winehq.org ReportedBy: markk(a)clara.co.uk Classification: Unclassified This bug applies to the SNES9x Super NES emulator. I'm testing with Wine 1.5.18-72-g0c0b229, Lubuntu 11.10 x86-64, Nvidia driver 304.64, SNES9x 1.53. (I set the bug component to directx-dsound, but that might not be correct.) Sound output using DirectSound is very CPU-intensive, and the sound crackles/glitches. Or rather, something about the sound output takes a relatively long time. According to "top" the CPU usage of SNES9x itself doesn't go through the roof with sound enabled. Emulation speed easily reaches 60fps with sound output disabled. On native Windows that's the case with DirectSound output (as opposed to the default is enabled too. CPU usage with sound disabled is ~26%. However on Wine with 48kHz DirectSound output the frame rate I see drops to ~45fps, CPU usage in top ~24% (lower usage because fewer frames per second are being emulated). If I disable the "Sync Sound" option frame rate returns to 60fps, ~30% CPU, but the sound still crackles. That's with the default buffer length of 64ms. Increasing that to 210ms helps a bit; I get 60fps even with Sync Sound enabled, though the sound still crackles. Decreasing buffer length to 16ms I get about 10fps with Sync Sound enabled. I don't think this problem is due to my hardware; other sound-producing programs like Audacious, flash plugin etc. seem to be fine. And by comparison, the Nestopia NES emulator in Wine produces (almost) glitch-free sound regardless of the program's latency setting. $ lspci -vv -s00:1b.0 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Lenovo Device 384e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at fc300000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel To hopefully reproduce the issue: - Download and unzip SNES9x - Download a ROM image, e.g. from http://pdroms.de/files/supernintendoentertainmentsystem/skipp-and-friends-p… - Run SNES9x. Choose Sound->Settings... and change Sound Driver to Snes9x DirectSound and Playback Rate to 48 KHz. (Selecting any other rate causes a crash for me, see bug 32312.) - Select Video->Display Configuration... and change Output Method to DirectDraw. (The default Direct3D just gives a blank screen, see bug 32319.) - Select File->Load Game... and choose the ROM image. - You should see graphics in the window and hear crackling/glitching sound. - In the sound settings, you can experiment with changing the buffer length and toggling the "Synchronize with sound core" option. I couldn't find any combination which gave artifact-free sound. For a +dsound log see the one I uploaded for bug 32312 at http://bugs.winehq.org/attachment.cgi?id=42668 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 17836] New: Motocross Madness 2 crashes at start
by wine-bugs＠winehq.org 29 Aug '20

29 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=17836 Summary: Motocross Madness 2 crashes at start Product: Wine Version: 1.1.17 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: hoehle(a)users.sourceforge.net Created an attachment (id=20098) --> (http://bugs.winehq.org/attachment.cgi?id=20098) trace and disassembly of crash location In AppDB, people have reported Motocross Madness 2 (mcm2) crashing in the intro but nobody had filed a bug yet. The backtrace makes it look like mcm2 crashes in, or immediately after, quartz.dll or amstream, after accessing ui\events.avi at the start of the program, after displaying for some seconds the stunt & warnings picture also known from the demo. The demo is not affected and proceeds from the intro picture to the menu. A log extract (+almost-all,-relay,-nls) from around the exception is attached. The processed file UI/events.avi is an Intel Indeo v5 video. The installer did not complain that Indeo is mising! Replacing it with a Cinepak avi, with an empty file, deleting it or installing iv5 still produces crashes at the same location in mcm2. Same with clicking to skip the intro picture or disabling quartz.dll. MCM2 suffers from SafeDisk 1.41.000 protection so it would not run as is in wine (or rather, it crashes much earlier). I tried 2 different cracks, both produced the same exception. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 23

[Bug 24320] New: Unexpected DetectEnvStatus.exe crash with Cisco Quick VPN Client (QVPN 1.4.1.2)
by wine-bugs＠winehq.org 28 Aug '20

28 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=24320 Summary: Unexpected DetectEnvStatus.exe crash with Cisco Quick VPN Client (QVPN 1.4.1.2) Product: Wine Version: unspecified Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: ethanfharris(a)gmail.com Cisco QVPN v1.4.1.2 does not work under Wine. QVPN is used to establish an IPSec Virtual Private Network tunnel from a client computer to a Cisco Router/Gateway to facilitate secure communication over the internet. There appear to be 3 errors when running the Cisco QVPN application under Wine: (a) an apparent crash / closure of DetectEnvStatus.exe (b) a failure to resolve a DDNS domain name, and (c) QVPN is not able to ping the gateway router, and all data transfer over the VPN fails. In all cases a popup box appears (see attached screenshot) indicating that DectectEnvStatus.exe has a serious problem and has closed. If anyone wants to debug this, I can supply a copy of QVPN, and I can set up a temporary guest account on my WRVS4400N small business router for testing purposes. QVPN works fine under Windows Vista SP2, and works fine on a Ununtu 10.04LTS host with a Vista guest running under Oracle VirtualBox. So the QVPN application itself is OK, and the problem is related somehow to Wine or various underlying services. On the attached screenshot the DetectEnvStatus popup appears immediately when I attempt to connect the VPN. If I use the IP address of the gateway router I am connecting to in lieu of the DDNS domain name, QVPN will create the VPN, but the tunnel verification ping test fails and the tunnel will not transmit data, which is why the "remote gateway not responding" message also appears on the screenshot. If I specify the DDNS domain name of the remote gateway router, the VPN tunnel is not established (not shown), suggesting a dynamic DNS name-to-IP address resolution related problem in Wine. Any help would be appreciated. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13

[Bug 23950] New: MPQEdit: Opening a folder results in the wrong error message
by wine-bugs＠winehq.org 27 Aug '20

27 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=23950 Summary: MPQEdit: Opening a folder results in the wrong error message Product: Wine Version: 1.3.0 Platform: x86 URL: http://zezula.net/download/mpqediten32_beta.zip OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: adys.wh(a)gmail.com Attachment #30066 showcases the expected error message ("The system cannot find the path specified"). Instead, running wine mpqedit c:\\ results in "Access denied" error message. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 30193] New: Crysis Wars ded server doesn't resize with wineconsole (curses backend)
by wine-bugs＠winehq.org 19 Aug '20

19 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=30193 Bug #: 30193 Summary: Crysis Wars ded server doesn't resize with wineconsole (curses backend) Product: Wine Version: 1.4-rc6 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: programs AssignedTo: wine-bugs(a)winehq.org ReportedBy: liquitsnake(a)gmx.net Classification: Unclassified Created attachment 39410 --> http://bugs.winehq.org/attachment.cgi?id=39410 screen The Crysis Wars dedicated server, when running under wineconsole with the curses backend, does not resize its viewport. It is stuck at the default 80x25, even if the terminal is considerably larger (see attachment). This produces some unexpected output, as some commands expect a larger size but have to be split over 2 lines via \ My terminal and wineconsole interact just fine, as I have verified with cmd. It's just this app that sticks to 80x25 no matter what. On Windows, it would normally spawn a console window with a size of 132x60 (or less if the desktop resolution can't fit that) Could it be that wineconsole first starts at 80x25 and only later resizes to terminal size? In that case, I can imagine that the app polls the size once during startup and sticks to that, thus limiting itself to 80x25. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 11

[Bug 13624] New: Lineage 2 - The Chaotic Throne - Hellbound
by wine-bugs＠winehq.org 16 Aug '20

16 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=13624 Summary: Lineage 2 - The Chaotic Throne - Hellbound Product: Wine Version: 1.0-rc3 Platform: All OS/Version: other Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: eryk-rutkowski(a)o2.pl Created an attachment (id=13604) --> (http://bugs.winehq.org/attachment.cgi?id=13604) Log from Terminal Problem is in Lineage 2 Hellbound and regarding npkycrypt - dll file. This dll is not work fine and don't recognize keyboard and i can't log in. There is communicate: "The keyboard security module has failed to load. please exit the game and try again" Sorry for my bad english but i'm from other country ;p -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 33317] New: Python error Fatal Python error: buffer overflow in getpathp.c's joinpath() when executing.
by wine-bugs＠winehq.org 16 Aug '20

16 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=33317 Bug #: 33317 Summary: Python error Fatal Python error: buffer overflow in getpathp.c's joinpath() when executing. Product: Wine Version: unspecified Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: andrew.thomas(a)hpcwales.co.uk Classification: Unclassified Created attachment 44067 --> http://bugs.winehq.org/attachment.cgi?id=44067 Lwsn output from running under wine Wine Version : wine64 --version wine-1.5.25 (64 Bit version) GCC Version : gcc --version gcc (GCC) 4.6.2 Python Version : python --version Python 2.7.3 Operating Systems Used: cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.5 (Tikanga) I have also tried on : cat /etc/redhat-release CentOS release 5.5 (Final) Program trying to run lwsn.exe (network render module part of Lightwave : https://www.lightwave3d.com/ ). 30 Day trial available. Command used: wine lwsn.exe -3 -cLWEXT11-64.CFG -d"z:\home\andy.thomas\Atticus" Scenes\black.lws 1 1 Problem, I compiled wine and setup lwsn.exe in accordance with this article: http://lordtangent.blogspot.co.uk/2007/01/running-lightwave-screamernet-lws… Initially it worked fine when running from the command line. I then wrapped it up in a batch script to be sent to our Linux cluster but got a Python error message : Fatal Python error: buffer overflow in getpathp.c's joinpath() I tried to execute interactively on the cluster and this worked fine but when executed from a script it gives the above error. I launched a forum post (as I a haven't done much troubleshooting with wine) : http://forum.winehq.org/viewtopic.php?f=8&t=18632 I have tried the recommendations but had no success. I re-compiled wine with the above gcc compiler and a more up to date version of Python but I can no longer execute on the command line. I now get the Python error regardless of how I execute the command. Any help would be greatly appreciated. If you need any further debugging please let me know. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 10