February 2014 - Wine-bugs - list.winehq.org

[Bug 29599] New: eRacer demo: screen too dark
by wine-bugs＠winehq.org 27 Dec '21

27 Dec '21

http://bugs.winehq.org/show_bug.cgi?id=29599 Bug #: 29599 Summary: eRacer demo: screen too dark Product: Wine Version: 1.3.37 Platform: x86 URL: http://www.fileplanet.com/60483/60000/fileinfo/eRacer- Online-Demo OS/Version: Linux Status: NEW Keywords: download Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: gyebro69(a)gmail.com Classification: Unclassified Created attachment 38348 --> http://bugs.winehq.org/attachment.cgi?id=38348 +xvidmode log The screen is so much dark in eRacer that you can hardly see anything. This bug affects Eurofighter Typhoon too (from the same developer: Rage Software). The screen stays dark after exiting the game and I have to restore the original gamma of the screen by 'xgamma -gamma 1.0'. I tried to take screenshots of the problem, but interestingly, the brightness of the screenshots is correct, and every detail on the screenshots is visible. Steps to reproduce the problem with the demo: 1. Install the demo as usual. 2. Remove/rename intro.avi from eRacer/Gui/Avi. Start the game by eracer.exe. 3. Text is missing from the game (bug #29598). In the menu press the down arrow once, so the 2nd option is selected and press <Enter>, then press <Enter> again on the next screen. The race should be started. In mid-game you can notice that most of the textures (the environment) are so dark that you can barely see anything. Fedora 16 Nvidia 250 / driver 290.10 X.Org X Server 1.11.3 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 19969] New: 2weistein + ElDorado: y and z switched with German keyboard/locale
by wine-bugs＠winehq.org 27 Dec '21

27 Dec '21

http://bugs.winehq.org/show_bug.cgi?id=19969 Summary: 2weistein + ElDorado: y and z switched with German keyboard/locale Product: Wine Version: 1.1.24 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: hoehle(a)users.sourceforge.net I'm using the German version of both apps below, with LANG=de_DE.UTF-8 typical of a German locale and a German keyboard with Ubuntu Intrepid. One particularity of the German keyboard is that Y and Z are switched. 2weistein is entirely driven by mouse except in the savegame dialog. There, z and y are switched (as if I were using a US keyboard) when entering the file name. El Dorado (German localised version) uses the y key to run. I must press the z key (between t and u) instead (in both the configuration menu and during game play). The bug about 2weistein also occurs with MacOS X.5.7, XQuartz 2.3.3.2 and Apple's German keyboard. Many other apps work fine. I thought Wine had code to sort-of revert the locale-dependent keyboard mapping (like dosbox). 2weistein is surprising, since one would not expect it to use low-level scancodes or similar in basically a file requester -- and it originates from Germany, so it undoubtfully works well in a German MS-Windows. Maybe the default code page selection does not work correctly? I also own a very old French title ("Kiyeko et les voleurs de nuit"; it says "win3.1 minimum") that supports 5 European languages and starts in English even with LANG=fr_... (the French locale files are installed on the Ubuntu system). I wrote no bug report so far because I couldn't test yet how it starts in MS-Windows. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 8

[Bug 30755] New: gdiplus tests fail if stix fonts present
by wine-bugs＠winehq.org 27 Dec '21

27 Dec '21

http://bugs.winehq.org/show_bug.cgi?id=30755 Bug #: 30755 Summary: gdiplus tests fail if stix fonts present Product: Wine Version: 1.5.4 Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com Classification: Unclassified On Centos 6, "make test" causes (among others) the failures runtest -q -P wine -M gdiplus.dll -T ../../.. -p gdiplus_test.exe.so ~/wine-git/dlls/gdiplus/tests/font.c && touch font.ok ... font.c:396: Test failed: Expected 0, got 3 font.c:397: Test failed: got NULL font collection make[1]: *** [font.ok] Error 2 /home/dank/wine-git/tools/runtest -q -P wine -M gdiplus.dll -T ../../.. -p gdiplus_test.exe.so /home/dank/wine-git/dlls/gdiplus/tests/graphics.c && touch graphics.ok ... graphics.c:1978: Test failed: Expected 00000000, got 00000010 Unhandled exception: page fault on read access to 0x00000048 in 32-bit code (0x6834d776). Backtrace: =>0 0x6834d776 get_log_fontW+0x16() in gdiplus (0x0032f8c8) 1 0x68358d57 get_font_hfont+0xf6() in gdiplus (0x0032f9f8) 2 0x6835d1cd GdipDrawString+0x26c() in gdiplus (0x0032fb78) 3 0x71cb8763 test_GdipDrawString+0x232() in gdiplus_test (0x0032fc38) 4 0x71cc5c45 func_graphics+0xb84() in gdiplus_test (0x0032fd18) ... Looks like GdipNewInstalledFontCollection() which calls EnumFontFamiliesExW() which calls add_font_proc() which calls GdipCreateFontFamilyFromName() and is failing because the latter function somehow chokes on the stix fonts (http://stixfonts.org) bundled with centos 6. Doing sudo chmod 000 /usr/share/fonts/stix works around the problem. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 12

[Bug 34931] New: Unhandled exception while installing Quicken 2014
by wine-bugs＠winehq.org 27 Dec '21

27 Dec '21

http://bugs.winehq.org/show_bug.cgi?id=34931 Bug #: 34931 Summary: Unhandled exception while installing Quicken 2014 Product: Wine Version: 1.7.5 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: alen.siljak(a)gmail.com Classification: Unclassified Created attachment 46550 --> http://bugs.winehq.org/attachment.cgi?id=46550 Log At the beginning of the MSI installation of Quicken 2014 Wine crashes. Log attached. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 12

[Bug 34293] New: Hauptwerk 4.0.0 64-bit will in stall but not run. 32-bit version runs.
by wine-bugs＠winehq.org 27 Dec '21

27 Dec '21

http://bugs.winehq.org/show_bug.cgi?id=34293 Bug #: 34293 Summary: Hauptwerk 4.0.0 64-bit will in stall but not run. 32-bit version runs. Product: Wine Version: 1.7.0 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: mark.a.farthing(a)gmail.com Classification: Unclassified Created attachment 45652 --> http://bugs.winehq.org/attachment.cgi?id=45652 Debug output from Wine and Playonlinux Hauptwerk 4.0.0 Free Edition 64-bit will load but not run. Almost as soon as one starts the program, one gets an error popup (C++ run time error - "This application has requested the runtime to terminate it in an unusual way"). I then ran it through playonlinux and got the debug output in the attachment (this debug output is the result of several attempts, so will contain a lot of duplication). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 10

[Bug 30957] New: Unhandled exception: page fault on read access to 0xffffffff in segmented 32-bit code
by wine-bugs＠winehq.org 27 Dec '21

27 Dec '21

http://bugs.winehq.org/show_bug.cgi?id=30957 Bug #: 30957 Summary: Unhandled exception: page fault on read access to 0xffffffff in segmented 32-bit code Product: Wine Version: 1.4.1 Platform: x86-64 OS/Version: Mac OS X Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: chiszp(a)hotmail.com Classification: Unclassified Created attachment 40618 --> http://bugs.winehq.org/attachment.cgi?id=40618 backtrace, log I'm attempting to install Protel Advanced Schematic v3.0 (old software, viewing setup.exe in a hex editor see references to a Borland installer). Running 'wine setup.exe' crashes after clicking 'Full Install'. Log included in attachment as requested. Disassembling at the crash location 0x1027:0x0508, the instruction appears to be: testl 0xffffffff,%fs:0x200 but the crash suggests wine is attempting to read from address 0xffffffff, rather than treating it as a literal value (a signed -1). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 16

[Bug 27800] New: NFS U1: Incorrect name of the game controller (wheel)
by wine-bugs＠winehq.org 27 Dec '21

27 Dec '21

http://bugs.winehq.org/show_bug.cgi?id=27800 Summary: NFS U1: Incorrect name of the game controller (wheel) Product: Wine Version: 1.3.24 Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: wylda(a)volny.cz I was asked by Lucas Fialho Zawacki to make some comparison of my wheel between WinXP and Wine. I took Need for Speed Underground 1 for the tests: Options -> Controller -> Controller Setup -> "2nd column": WinXP says: "Wheel" Wine says: "Joypad" Tested with: * wheel "Logitech Wingman Formula Force GP" * wine-1.3.24-174-g4b4dd30. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 24079] New: VSphere Client 4.1: Unable to connect to server
by wine-bugs＠winehq.org 27 Dec '21

27 Dec '21

http://bugs.winehq.org/show_bug.cgi?id=24079 Summary: VSphere Client 4.1: Unable to connect to server Product: Wine Version: 1.3.0 Platform: x86 URL: http://vsphereclient.vmware.com/vsphereclient/2/5/8/9/ 0/2/VMware-viclient-all-4.1.0-258902.exe OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: vince(a)marsters.co.uk Created an attachment (id=30288) --> (http://bugs.winehq.org/attachment.cgi?id=30288) output log when run from a command line Once installed and dotnet30 installed using winetricks the application runs but when you enter the server IP, username and password of the ESXi server and click login there is a connecting message which eventually changes 'Connection Failed' along with a popup "vSphere Client could not connect to 'server ip' The server took too long to respond (The operation has timed out)" -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 43

[Bug 12664] New: Game Craft after selecting Pilot
by wine-bugs＠winehq.org 27 Dec '21

27 Dec '21

http://bugs.winehq.org/show_bug.cgi?id=12664 Summary: Game Craft after selecting Pilot Product: Wine Version: 0.9.59. Platform: PC URL: http://appdb.winehq.org/objectManager.php?sClass=version &iId=11224 OS/Version: Linux Status: UNCONFIRMED Severity: critical Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: kur1g3n(a)hotmail.com Created an attachment (id=12321) --> (http://bugs.winehq.org/attachment.cgi?id=12321) Log of what says wine all the way from launcher to game crash Once in game, we can choose the pilot we want to play, after selecting it, the game begins loading, and it crashes during loading (or at end ?) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 12

[Bug 22726] New: CodeGear RAD Studio 2007/2009 installation errors: column 3/4 out of range, missing column in table L"Property"
by wine-bugs＠winehq.org 27 Dec '21

27 Dec '21

http://bugs.winehq.org/show_bug.cgi?id=22726 Summary: CodeGear RAD Studio 2007/2009 installation errors: column 3/4 out of range, missing column in table L"Property" Product: Wine Version: 1.1.44 Platform: x86-64 URL: http://www.codegear.com/products/radstudio OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: msi AssignedTo: wine-bugs(a)winehq.org ReportedBy: wine-bug(a)gigawatt.nl CC: dank(a)kegel.com, liquitsnake(a)gmx.net +++ This bug was initially created as a clone of Bug #13042 +++ The installer of CodeGear RAD Studio 2007 and 2009 fails as reported in #13042. That bug contains a patch which fixes this problem, and allows the installation to continue. However, later on, it still fails: err:msidb:get_tablecolumns column 3 out of range err:msidb:get_tablecolumns column 4 out of range err:msidb:get_tablecolumns missing column in table L"Property" I have reported this as a new bug because at first sight this looks completely unrelated, but if that was wrong, this can be closed as a duplicate. The steps I have taken to see this problem: - Start with a clean config - Set mode to Windows 2000 - Install MDAC 2.8 SP1 - Set mode back to Windows XP - Make the RAD Studio (2007 or 2009) installation disc available as D:\ - Run D:\Install\Setup.exe - Click "Retry" once during the automatic .NET Framework installation - Choose your selection, same problem with everything except for the first option (CodeGear RAD Studio) deselected, as with everything selected - Proceed with the installation It finishes unpacking, and I find the unpacked files as, for example, .wine/drive_c/users/Public/Application Data/{B278BA8C-C407-4742-B58E-CE34D8C8A15B}/corey/B1A48A5A/39948DF1/bds.exe and those files look correct, or at least the text files that I could check do. However, then it hangs. The installer says "Windows Installer", on the console I see error messages (look up), and the only action I can take is to click "Cancel", which also doesn't actually work. I am using Wine 1.1.44, as reported by wine --version. I do not know what more information you need, but I will be happy to answer any questions. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 12