June 2017 - Wine-bugs - list.winehq.org

[Bug 32224] New: LTspice: selected text/component after Ctrl+F not highlighted
by wine-bugs＠winehq.org 16 Jun '22

16 Jun '22

http://bugs.winehq.org/show_bug.cgi?id=32224 Bug #: 32224 Summary: LTspice: selected text/component after Ctrl+F not highlighted Product: Wine Version: unspecified Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: testelor(a)yahoo.com Classification: Unclassified Steps to reproduce: 1) Download and install LTspice - http://ltspice.linear.com/software/LTspiceIV.exe 2) Run LTspice using: $ wine scad3.exe -nowine 3) Create a new schematic, press 'R' (resistor), for example, and place it twice by clicking. There should be R1 and R2 on the schematic. 4) Press Ctrl+F and search for "r2", no quotes, it should be highlighted in yellow, but they're not. Side note: - create a new schematic, press F2 to bring up the device list. - select current, place it on the schematic - right-click on it and type '1', no quotes, then OK - press 'R', place it next to the current source, in parallel - right click on it and replace "R" with '1', no quotes, then OK - press 'G' and place ground on the lower pins of both components - press F3 and draw a net by clicking on the unconnected current source's pin, then on the resistor's - press 'S' and write ".tran 1", no quotes, don't forget the dot, place it on the schematic - in the toolbar, press the 'running man' button, or right-click on the schematic and choose "run" - it should be almost instant, a new empty window will pop up, above - move the mouse cursor over the resistor until the cursor changes into a current-clamp (something black with a red arrow), then click once to display the current through the resistor - in the newly created window, there will be a trace displayed and a label at the top, reading I(R1) Alt+left-clicking on the label will highlight the resistor. That's how it should look like after Ctrl+F. Alternatively, you can just run "wine scad3.exe", no "-nowine" switch, and repeat the 4 steps in the beginning. No screenshot as it doesn't make sense to show what doesn't happen... -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 8

[Bug 28282] New: Sound constantly crackling in StarCraft II
by wine-bugs＠winehq.org 15 Jun '22

15 Jun '22

http://bugs.winehq.org/show_bug.cgi?id=28282 Summary: Sound constantly crackling in StarCraft II Product: Wine Version: 1.3.26 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: pitlicek(a)gmail.com Sound is crackling since 1.3.26 (and still does in 27) and console is spammed with "err:alsa:wine_snd_pcm_recover underrun occurred". Using ALSA in Wine (PulseAudio in Ubuntu 11.04), full acceleration (changing to emulation doesn't fix it), 48 kHz (my SoundBlaster can handle it, and again, change makes no difference), 16 bps. Using OSS and padsp results in no sound at all. But it's still better than no sound in 1.3.25 after mmdevapi rewrite/implementation. ;) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 111

[Bug 41163] New: Minimum memory for Nvidia GTX 1060 should be 3GB
by wine-bugs＠winehq.org 10 Jun '22

10 Jun '22

https://bugs.winehq.org/show_bug.cgi?id=41163 Bug ID: 41163 Summary: Minimum memory for Nvidia GTX 1060 should be 3GB Product: Wine Version: 1.9.16 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: trivial Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: markk(a)clara.co.uk Distribution: --- In dlls/wined3d/directx.c a comment says "The amount of video memory stored in the gpu description table is the minimum amount of video memory "found on a board containing a specific GPU." The line for Nvidia GTX 1060: {HW_VENDOR_NVIDIA, CARD_NVIDIA_GEFORCE_GTX1060, "NVIDIA GeForce GTX 1060", DRIVER_NVIDIA_GEFORCE8, 6144}, 6144 should probably be changed to 3072, since a 3GB version of the GTX 1060 (with slightly cut-down GPU) has been announced: http://www.eurogamer.net/articles/digitalfoundry-2016-nvidia-unveils-cut-do… Either that, or a separate entry for the 3GB model should be added. Also, in dlls/wined3d/wined3d_private.h is the PCI ID for the GTX 1060: CARD_NVIDIA_GEFORCE_GTX1060 = 0x1c03, Nvidia uses 0x1C02 for the 3GB GTX 1060, according to the Windows driver INF file: NVIDIA_DEV.1C02.8438.19DA = "NVIDIA GeForce GTX 1060 3GB" NVIDIA_DEV.1C03.9438.19DA = "NVIDIA GeForce GTX 1060 6GB" -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 3

[Bug 31387] New: Helicopter's tail prop is sometimes partly black in GTAIV
by wine-bugs＠winehq.org 08 Jun '22

08 Jun '22

http://bugs.winehq.org/show_bug.cgi?id=31387 Bug #: 31387 Summary: Helicopter's tail prop is sometimes partly black in GTAIV Product: Wine Version: 1.5.9 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: b7.10110111(a)gmail.com Classification: Unclassified Created attachment 41247 --> http://bugs.winehq.org/attachment.cgi?id=41247 Screenshot This bug is similar to bug 21197, but this particular thing wasn't fixed by the commit which did fix that bug. See the screenshot. Symptoms are the same - one of the propeller blades is black with black pixels around. How to reproduce once in the game: 1. Find/spawn Police Maverick helicopter 2. Get inside it 3. Take off to be about 10 m above ground 4. Press 'S' and hold it so that helicopter punches the ground 5. See the artifact appear -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13

[Bug 41464] New: Quake live sound latency
by wine-bugs＠winehq.org 08 Jun '22

08 Jun '22

https://bugs.winehq.org/show_bug.cgi?id=41464 Bug ID: 41464 Summary: Quake live sound latency Product: Wine Version: 1.9.19 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-dsound Assignee: wine-bugs(a)winehq.org Reporter: cosiekvfj(a)o2.pl Distribution: --- Hi. I measured sound latency(from fire button to gauntlet noise)(audacity) and it's about >160ms. For that fast paced game it's to much. Even after tweaking s_mixprestep and alsa buffer it's still to much. Soundbackend Alsa Linux GA-MA790X-DS4 4.6.7-1-MANJARO #1 SMP PREEMPT Tue Aug 16 19:20:55 UTC 2016 x86_64 GNU/Linux -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 7

[Bug 25173] New: No sound in menus/game play in Call Of Duty : Black Ops
by wine-bugs＠winehq.org 08 Jun '22

08 Jun '22

http://bugs.winehq.org/show_bug.cgi?id=25173 Summary: No sound in menus/game play in Call Of Duty : Black Ops Product: Wine Version: 1.3.7 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: directx-dsound AssignedTo: wine-bugs(a)winehq.org ReportedBy: oneofone(a)gmail.com Created an attachment (id=31938) --> (http://bugs.winehq.org/attachment.cgi?id=31938) WINEDEBUG=+dsound It's not http://bugs.winehq.org/show_bug.cgi?id=16942 as far as I can tell, I tried everything. Clean prefix, winver=windows7, disabled mmdevapi. When I tried native dsound I lost the sound in the cut scenes. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 26

[Bug 37627] New: NFS Porsche Unleashed: Geometry is not visible when using dx7z renderer
by wine-bugs＠winehq.org 07 Jun '22

07 Jun '22

https://bugs.winehq.org/show_bug.cgi?id=37627 Bug ID: 37627 Summary: NFS Porsche Unleashed: Geometry is not visible when using dx7z renderer Product: Wine Version: 1.7.31 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: gohabsgo60(a)yahoo.ca Distribution: --- Created attachment 50074 --> https://bugs.winehq.org/attachment.cgi?id=50074 a screenshot of the bug in wine 1.7.31, if i run the game with this command: wine porsche driver=dx7z and start a race, all i see is the HUD and skybox... no geometry is rendered. this happens with both the nvidia blob and nouveau. however, if i install the nglade wrapper and choose the voodoo2z renderer instead , like this: wine porsche driver=voodoo2z then the game renders everything normally, even the intro videos that are never rendered with dx7z driver. btw, can someone reopen bug 25065 for me please ? -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 7

[Bug 37568] New: Dark Omen fails to render 3D graphics
by wine-bugs＠winehq.org 07 Jun '22

07 Jun '22

https://bugs.winehq.org/show_bug.cgi?id=37568 Bug ID: 37568 Summary: Dark Omen fails to render 3D graphics Product: Wine Version: 1.7.31 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: jcarthew(a)gmail.com Distribution: --- Created attachment 49985 --> https://bugs.winehq.org/attachment.cgi?id=49985 Log of errors Warhammer: Dark Omen fails to render 3D Geometry and sprites. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 5

[Bug 42168] New: Crash when loading DayZ at menu
by wine-bugs＠winehq.org 07 Jun '22

07 Jun '22

https://bugs.winehq.org/show_bug.cgi?id=42168 Bug ID: 42168 Summary: Crash when loading DayZ at menu Product: Wine Version: 2.0-rc3 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: sage.kiln(a)gmail.com Distribution: --- Created attachment 56765 --> https://bugs.winehq.org/attachment.cgi?id=56765 crash report Crash when loading into menu of DayZ shortly after the first few sounds play. (birds) The canvas looks blank like nothing is loading. If I launch with -world=empty, game will allow me to load into a server, but graphics never show up... so worthless. Attached is the backtrace. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 9

[Bug 36076] New: Storm crashes during startup
by wine-bugs＠winehq.org 07 Jun '22

07 Jun '22

http://bugs.winehq.org/show_bug.cgi?id=36076 Bug ID: 36076 Summary: Storm crashes during startup Product: Wine Version: 1.7.17 Hardware: x86 URL: http://store.steampowered.com/app/231020/ OS: Linux Status: NEW Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: madewokherd(a)gmail.com While loading the title screen, Storm crashes with the following output: s (x86)\Steam\steamapps\common\Storm\StormExe\StormTheGame.exe: ../../../dlls/d3d9/vertexdeclaration.c:306: unsafe_impl_from_IDirect3DVertexDeclaration9: Assertion `iface->lpVtbl == &d3d9_vertex_declaration_vtbl' failed. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 8