October 2019 - Wine-bugs - list.winehq.org

[Bug 47869] New: dwrite:font fails on cw-rx460-1809
by WineHQ Bugzilla 03 May '21

03 May '21

https://bugs.winehq.org/show_bug.cgi?id=47869 Bug ID: 47869 Summary: dwrite:font fails on cw-rx460-1809 Product: Wine-Testbot Version: unspecified Hardware: x86 OS: Windows Status: NEW Severity: normal Priority: P2 Component: unknown Assignee: wine-bugs(a)winehq.org Reporter: fgouget(a)codeweavers.com dwrite:font started failing when the AMD HD6800 graphics card was replaced with the ADM RX 460 one. The failures are always the same: font.c:1731: Test failed: got 0x8007007a font.c:1744: Test failed: got 54 font.c:1749: Test failed: got 54 The exact tag is cw-rx460-1809, which is the Windows 10 1809 disk image. This means either the new graphics driver changed something (maybe it installed a new strange font?), or a Windows 10 update slipped in while the new graphics driver was being updated (which is quite likely). -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 5

[Bug 47998] New: Better deal with random test failures
by WineHQ Bugzilla 03 May '21

03 May '21

https://bugs.winehq.org/show_bug.cgi?id=47998 Bug ID: 47998 Summary: Better deal with random test failures Product: Wine-Testbot Version: unspecified Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: unknown Assignee: wine-bugs(a)winehq.org Reporter: fgouget(a)codeweavers.com Distribution: --- Some tests fail randomly. They should be fixed of course but the in the meantime the TestBot should try not to report them as new failures when they happen. To detect new errors the TestBot compares a task's test result with that of the latest WineTest run. So if a failure did not happen during the last WineTest run and then happens when testing a patch it will be reported as a new failure. To avoid that the TestBot should take into account not just the latest WineTest report, but all the available test reports. This way, if the random failure happened in any of those runs it will be reported as pre-existing as expected. How much of a history to take into account can then be adjusted by changing $JobPurgeDays, or adding a specific setting. Note that this means if a failure is fixed and is reintroduced soon after it will not be reported as a new failure. This scenario should be rare enough to not be an issue in practice. To implement this: 1. Store the WineTest reports in the var/latest directory with the following naming format: <vmname>-job<jobid>_<stepno>_<taskno>-<report> 2. At the start of WineRunTask and WineRunWineTest delete any reference report in the task's directory (in case the task is restarted), then make new hard links to the current set of reference reports. Handle this in LogUtils::GrabReferenceReports() so this code is shared. 3. Add LogUtils::AddReferenceReport() to deal with copying the WineTest reports to var/latest. Call this function when WineRunTask and WineRunWineTest complete. 4. In GetNewLogErrors() initially mark all errors as new. Then diff the current report with each of the reference reports located in the task's directory in turn and remove any error that's not new from the set of new errors. Note that currently the reference logs are simple copies of the original WineTest report. This means these are large files which must be parsed again to extract errors. With the current $JobPurgeDays setting there will be around 20 reference logs which will require 20 times as much log parsing. So there are two optimizations one can do, both happening when adding a new reference report (i.e. in AddReferenceReport()): a. Instead of copying the full report, save only the errors. That's all the diff needs and this should reduce the size of the files by a factor of 10 (and thus speed up parsing). b. After saving a new reference file, diff it against the old reference files. Delete any old reference file that has no error not already present in the new reference file. This will not help much if the set of failures is different with every run. But otherwise this will speed up both the parsing and diffing. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 4

[Bug 42770] New: test.winehq.org: Provide a view showing only the TestBot VMs
by wine-bugs＠winehq.org 03 May '21

03 May '21

https://bugs.winehq.org/show_bug.cgi?id=42770 Bug ID: 42770 Summary: test.winehq.org: Provide a view showing only the TestBot VMs Product: WineHQ.org Version: unspecified Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: www-unknown Assignee: wine-bugs(a)winehq.org Reporter: fgouget(a)codeweavers.com Distribution: --- In Huw's words: > Something else that would be very useful is the ability to > display just the test bot VMs. These are the ones we care > about the most, and the ones that are possible to fix without > having to get a third-party to manually run a test. I find it > difficult to just keep track of these VMs when their results get > swamped by all the other machines’ failures. > > I‘d imagine this should be possible to do using static > pages. The root page (equivalent to data/index.html) > could be something like data/wtb_index.html. Clicking > on a build id would take you to data/build-id/wtb_index.html, > then clicking on an OS flavour would take you to > data/build-id/wtb_index_flavour.html. You’d also need some > way to toggle in and out of the mode. This should be pretty similar to adding the 'flat index' files mentioned in bug 39379. https://bugs.winehq.org/show_bug.cgi?id=39379 An interesting alternative would be to go the JavaScript way and make the index files, which are essentially big tables, sortable, filterable on the client-side. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 3

[Bug 47854] New: Block Windows 10 updates
by WineHQ Bugzilla 03 May '21

03 May '21

https://bugs.winehq.org/show_bug.cgi?id=47854 Bug ID: 47854 Summary: Block Windows 10 updates Product: Wine-Testbot Version: unspecified Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: unknown Assignee: wine-bugs(a)winehq.org Reporter: fgouget(a)codeweavers.com Distribution: --- Windows Updates can interfere with the Wine tests in many ways: * By causing disk traffic they could slow down some tests, causing them to time out. (Some Wine tests are already somewhat slow. Obviously making them faster and/or improving QEmu's disk performance would be great but barring that preventing undue external disk traffic is necessary) * Windows installing an update at the same time WineTest is testing MSI installs could cause interference. * There is also a risk of Windows scheduling a reboot during a test, or popping up a window asking to reboot during Wine's windowing tests. And in any case Windows Updates are a waste of CPU, network and disk bandwidth since VMs will be reverted as soon as the test is completed. For these reasons pre-Windows 10 versions are configured with Windows updates disabled. But for Windows 10 that's not possible. So instead the 'Windows Update' service is disabled. However that does not survive reboots. So LibvirtTool could maybe run a command to re-disable that service when it creates a live snapshot. That command could also be repeated in WineRunTask before starting the tests. Also for Windows 10 >= 1703 it is possible to set the network connection to metered mode. This appears to prevent updates no matter what limit is set which means it's preferable to set a large limit to avoid notifications abut being past the limit. To set the network connection in metered mode: * In Windows >= 1703: Settings -> Ethernet -> Ethernet (Connected) -> 'Set as metered connection'. * In Windows >= 1809 This page also describes a regedit based approach. It's unclear if it works with older Windows 10 versions. https://www.winhelponline.com/blog/ethernet-metered-connection-windows-10-d… [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\DefaultMediaCost] "Ethernet"=DWORD:2 Note that this requries changing the ownership on DefaultMediaCost to the Administrators group and then back to its original owner, TrustedInstaller, aka "NT Service\TrustedInstaller" (use those Advanced buttons). -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 3

[Bug 47838] New: Add a dual-screen Windows VM
by WineHQ Bugzilla 03 May '21

03 May '21

https://bugs.winehq.org/show_bug.cgi?id=47838 Bug ID: 47838 Summary: Add a dual-screen Windows VM Product: Wine-Testbot Version: unspecified Hardware: x86 OS: Windows Status: NEW Severity: normal Priority: P2 Component: unknown Assignee: wine-bugs(a)winehq.org Reporter: fgouget(a)codeweavers.com Wine has tests that deal with multi-head displays. These would need some matching multi-head test VMs. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 6

[Bug 47849] New: Simplify BuildCros() in Build.pl
by WineHQ Bugzilla 03 May '21

03 May '21

https://bugs.winehq.org/show_bug.cgi?id=47849 Bug ID: 47849 Summary: Simplify BuildCros() in Build.pl Product: Wine-Testbot Version: unspecified Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: unknown Assignee: wine-bugs(a)winehq.org Reporter: fgouget(a)codeweavers.com Distribution: --- Build.pl is the script that's responsible for building PE executables that can be used to runt he tests on Windows VMs. Currently it's still jumping through hoops to produce PE executables (see BuildNative() and BuildCross()), which is most likely unnecessary since Wine now builds all tests as PE executables by default. So that code could likely be simplified but we would not want to lose speed advantage either: the build VM never compiles a full Wine which means patches touching headers don't cause 45+ minutes builds. Also the current code still works so it's not necessarily urgent. Side note: In fact it could be argued that the build VMs are unnecessary now since any Wine VM could produce these PE executables. There's some caveats with that though: - Wine may not produce PE executables on some platforms. For instance for a while it looked like MinGW was not usable on NetBSD, forcing the TestBot to produce only regular ELF executables. That got fixed but the issue may happen again on other Unix platforms. Maybe. - In the absence of support for load balancing it's useful to have a separate build VM to spread the load. That VM could be a repurposed Wine VM though. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 3

[Bug 47853] New: Allow testing in any locale on Wine VMs
by WineHQ Bugzilla 03 May '21

03 May '21

https://bugs.winehq.org/show_bug.cgi?id=47853 Bug ID: 47853 Summary: Allow testing in any locale on Wine VMs Product: Wine-Testbot Version: unspecified Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: unknown Assignee: wine-bugs(a)winehq.org Reporter: fgouget(a)codeweavers.com Distribution: --- Because Wine VMs run Unix, running a test in a locale is a simple matter of setting $LANG (*), creating a new WinePrefix for good measure, and running the test normally. This does assume that the relevant locales have been configured before hand which is an easy one-time task when setting up the VM. Wine VMs already have a list of missions they perform for wine-devel patches from which we can derive a list of locales to offer on the 'Submit job' page (see bug 47852). But we would not want to run every patch through every possible locale as this would take too much time (there are dozens of locales). But extra locales could be included in the 'Submit job' page to allow debugging of these locales. (*) And $LC_ALL too??? -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 3

[Bug 32216] New: WienTestBot should skip some tests on some platforms
by wine-bugs＠winehq.org 03 May '21

03 May '21

http://bugs.winehq.org/show_bug.cgi?id=32216 Bug #: 32216 Summary: WienTestBot should skip some tests on some platforms Product: Wine-Testbot Version: unspecified Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: fgouget(a)codeweavers.com Classification: Unclassified An example is the ieframe:webbrowser tests which it should skip on NT4 and Windows 2000 platforms. WineTest.exe is said to already have the necessary code somewhere, it's just missing from TestLauncher. See this wine-devel thread for more details: http://www.winehq.org/pipermail/wine-devel/2012-November/097819.html -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 11

[Bug 27453] New: Lag when loading new sound in source games
by wine-bugs＠winehq.org 03 May '21

03 May '21

http://bugs.winehq.org/show_bug.cgi?id=27453 Summary: Lag when loading new sound in source games Product: Wine Version: 1.3.21 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: congelli501(a)gmail.com When you start a level in a game powered by valve's source engine, sounds that are played for the first time since the game was launched will cause the game to lag. Ex: open a new portal for the first time in a Portal2 level. Affects: - Portal 2 - Left 4 Dead 2 - Probably more... -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 39

[Bug 10219] New: Windows Media Player 11 setup fails
by wine-bugs＠winehq.org 03 May '21

03 May '21

http://bugs.winehq.org/show_bug.cgi?id=10219 Summary: Windows Media Player 11 setup fails Product: Wine Version: 0.9.48. Platform: PC URL: http://www.microsoft.com/windows/windowsmedia/download/A llDownloads.aspx?displang=en&qstechnology= OS/Version: Linux Status: NEW Keywords: download, Installer Severity: normal Priority: P2 Component: wine-misc AssignedTo: wine-bugs(a)winehq.org ReportedBy: alex(a)thehandofagony.com The setup program for Windows Media Player 11 tries to validate Windows if the version is set to XP, and this fails. There was talk some time ago about an ntlm_auth patch that would allow the validation, but it fails for me even though I have the correct version of Samba installed. However, the installer does not run the Genuine check if the Windows version is set to Vista. When run thus it does work, however; it tries to create an instance of a wuapi.dll class, which is not registered in Wine. When I use a native dll from XP and register it the console output changes saying no instance could be created. The installer then says no updates could be found. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

2 19