March 2019 - Wine-bugs - list.winehq.org

[Bug 34153] New: wine does not restore mode of direction keys properly
by wine-bugs＠winehq.org 27 Jan '20

27 Jan '20

http://bugs.winehq.org/show_bug.cgi?id=34153 Bug #: 34153 Summary: wine does not restore mode of direction keys properly Product: Wine Version: 1.6 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: trivial Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: unsuspicious.fakename+wine(a)gmail.com Classification: Unclassified Wine seems to change the up key from ^[[A to ^[OA but not always back (reliably reproducible on unclean exits / crashes and such, but randomly happens after clean exits too). 1) open terminal (tested in bash / zsh; with xfce4-terminal and lxterminal) 2) ctrl+v [up key] should give you: ^[[A 3) winecfg 4) ctrl+c in terminal to end winecfg 5) ctrl+v [up key] now gives you: ^[OA This can - depending on shell configuration - temporarily break features like p.e. bash history search bound to up/down ^[[A (but not explicitly ^[OA) and leave end-users clueless due to the subtle / weird nature of the unexpected behaviour. That being said: Not sure if (wine) bug or (for some reason I can't grasp) normal / intended behaviour. All I know is it took me quite a while and also help to figure out what's happening and how to work around it. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 4

[Bug 21456] New: Mathematica 4.0 crash
by wine-bugs＠winehq.org 26 Jan '20

26 Jan '20

http://bugs.winehq.org/show_bug.cgi?id=21456 Summary: Mathematica 4.0 crash Product: WineHQ Apps Database Version: unspecified Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: appdb-unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: jean-pierre(a)piantino.com Created an attachment (id=25836) --> (http://bugs.winehq.org/attachment.cgi?id=25836) Terminal output after launching Mathematica Mathematica 4.0 was running in Wine 1.1.36 under openSUSE 11.1. Upgrading openSUSE to 11.2 makes Mathematica crash at launch. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 12

[Bug 17982] New: PatBlt cannot draw arbitrary parallelograms based on the world transform
by wine-bugs＠winehq.org 26 Jan '20

26 Jan '20

http://bugs.winehq.org/show_bug.cgi?id=17982 Summary: PatBlt cannot draw arbitrary parallelograms based on the world transform Product: Wine Version: 1.1.18 Platform: Other OS/Version: other Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: winex11.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: madewokherd(a)gmail.com Using the functions SetGraphicsMode and (Set|Modify)WorldTransform, it is possible to define an arbitrary matrix to transform all points as things are drawn to device contexts. Using this matrix, it should be possible to apply arbitrary rotation/shear effects. Thus, rectangles drawn on the hdc can be transformed into arbitrary parallelograms. This only works on systems where GM_ADVANCED is supported (NT but not 9x, according to MSDN). I have written a test program that demonstrates this on Windows. On Wine, it can only draw rectangles. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 10

[Bug 32050] New: Running Dragon age 2 with High resolution textures results in GL_OUT_OF_MEMORY errors
by wine-bugs＠winehq.org 26 Jan '20

26 Jan '20

http://bugs.winehq.org/show_bug.cgi?id=32050 Bug #: 32050 Summary: Running Dragon age 2 with High resolution textures results in GL_OUT_OF_MEMORY errors Product: Wine Version: 1.5.15 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: xvachon(a)gmail.com Classification: Unclassified When Dragon Age 2 is run with the high resolution textures pack (http://social.bioware.com/page/da2-patches) I get GL_OUT_OF_MEMORY errors in about 30 seconds in game and it crashes. Some examples include : err:d3d_surface:surface_allocate_surface >>>>>>>>>>>>>>>>> GL_OUT_OF_MEMORY (0x505) from glTexImage2D @ surface.c / 2747 err:d3d_surface:surface_upload_data >>>>>>>>>>>>>>>>> GL_INVALID_VALUE (0x501) from glCompressedTexSubImage2DARB @ surface.c / 2364 err:d3d_draw:drawStridedFast >>>>>>>>>>>>>>>>> GL_OUT_OF_MEMORY (0x505) from glDrawElementsBaseVertex @ drawprim.c / 48 err:d3d:buffer_create_buffer_object glBufferDataARB failed with error GL_OUT_OF_MEMORY (0x505) err:d3d:buffer_create_buffer_object Failed to create a vertex buffer object. Continuing, but performance issues may occur Running the game with the highest DirectX9 settings (Medium, Anti-aliasing 16x) and High Res textures disabled works well on my system. wine 1.5.15 Dragon age 2 1.04 with all DLC Nvidia 550 Ti 2GB Ram Arch Linux X64 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 17

[Bug 25945] New: C_ASSERT doesn't fail if given non-constant expression
by wine-bugs＠winehq.org 26 Jan '20

26 Jan '20

http://bugs.winehq.org/show_bug.cgi?id=25945 Summary: C_ASSERT doesn't fail if given non-constant expression Product: Wine Version: 1.1.22 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: alexander.scott.johns+winebug(a)googlemail.com In commit wine-1.1.21-63-g5d31eb9 AJ changed the definition of C_ASSERT (in include/winnt.h) to make it compatible with newer versions of GCC. Roughly, the change was: -#define C_ASSERT(e) extern char __C_ASSERT__[(e)?1:-1] __attribute__((unused)) +#define C_ASSERT(e) extern void __C_ASSERT__(int [(e)?1:-1]) Unfortunately, in GCC 4.4.3, the new definition of C_ASSERT doesn't fail when given a non-constant expression. E.g.: C_ASSERT(rand() == -1); /* ignored */ I think this is because GCC (as per C99) is treating the parameter of __C_ASSERT__ as a VLA (variable length array), and so its type is equivalent to int[*]. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 6

[Bug 38271] New: The Docear4Word plugin for MS Word does not work at all
by wine-bugs＠winehq.org 25 Jan '20

25 Jan '20

https://bugs.winehq.org/show_bug.cgi?id=38271 Bug ID: 38271 Summary: The Docear4Word plugin for MS Word does not work at all Product: Wine Version: unspecified Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: whynot(a)nurfuerspam.de Distribution: --- Created attachment 51098 --> https://bugs.winehq.org/attachment.cgi?id=51098 Debug output trying to install/launch docear4word with Word Docear4Word is a FOSS plugin for MS Word, which allows creating citations and bibliography in MS Word based on a BibTeX database. Information about this plugin can be found here: http://www.docear.org/software/add-ons/docear4word/overview/ This is the download link: http://docear.org/download/docear4word_setup.exe The plugin's source code is also available: http://docear.org/download/docear4word_source.zip I tried installing this in both Word 2007 and Word 2010. In both cases, the install of the plugin appears to finish without any errors (in the GUI). In Word 2007, the progress is a little bit better, since the plugin at least shows up in the preferences (Word Options => Add-Ins => Inactive Application Add-ins lists "Docear4Word"). Obviously, since it is inactive, something went wrong. Also by following "Manage => Add-Ins => COM-Add-Ins" one gets to a modal pop-up window, which lists all COM Add-Ins. "Docear4Word" appears, but is unchecked. If one checks it and goes to the same window again (COM Add-Ins), it will say "Load Behavior: Not loaded. A runtime error occurred during the loading of the COM Add-in." If one turns wine debug output on, the are some specific errors in the command line (see attachment, 1st part), perhaps most importantly "fixme:ole:CoCreateInstance no instance created for interface {b65ad801-abaf-11d0-bb8b-00a0c90f2744} of class {34f82078-360b-4682-8275-0d9b0b641cbd}, hres is 0x800704e5" In Word 2010, the add-in does not even show up in Word whatsoever. Trying to manually launch the docear4word.exe installer from the Add-ins Window by using "Add", there is also some debug output in the console (see attachment, 2nd part). The Add-in uses .NET, so an obvious question is how to handle the .NET. I tried various approaches using several .NET versions and service packs via winetricks, and I believe also mono. Nothing worked. I do not remember the outcome of every single variant, but could try specific suggestions. This add-in is really important, since many in the science community are using Linux, but have to work with MS Word via wine for several reasons. Most in the science community use such plug-ins for reference management. Docear4Word is perhaps the most promising, powerful, and viable one, since the Docear4Word project strictly follows an FOSS approach. Getting this to work would thus be a huge progress. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 3

[Bug 33065] New: Make it possible to build a winetest executable with a single test
by wine-bugs＠winehq.org 24 Jan '20

24 Jan '20

http://bugs.winehq.org/show_bug.cgi?id=33065 Bug #: 33065 Summary: Make it possible to build a winetest executable with a single test Product: Wine-Testbot Version: unspecified Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: fgouget(a)codeweavers.com Classification: Unclassified Currently WineTestBot runs individual tests through TestLauncher (see testbot/src/TestLauncher). TestLauncher is responsible for checking for potential issues like missing dlls that could cause the test to hang on an error dialog. However that means duplicating a lot of WineTest's code and also that TestLauncher tends to be out of date (see bug 31609 for instance). Building the regular winetest.exe (with all the tests) and just running one test would result in a lot of wasted disk space and bandwidth. So the idea would be to make it possible to build winetest.exe and to only include the one test we want to run in the resources. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 11

[Bug 44684] New: Shaders fail to compile in Roblox Studio (white window)
by wine-bugs＠winehq.org 24 Jan '20

24 Jan '20

https://bugs.winehq.org/show_bug.cgi?id=44684 Bug ID: 44684 Summary: Shaders fail to compile in Roblox Studio (white window) Product: Wine Version: 3.3 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: and3md(a)gmail.com Distribution: --- Created attachment 60693 --> https://bugs.winehq.org/attachment.cgi?id=60693 Roblox Studio run log The application displays splash screen correctly. Next, the main window is showed which is "empty" (the window is white). The cursor changes its shape in some places so probably it's just a display case. Wine returns a lot of errors: 007d: err: d3dcompiler: compile_shader HLSL shader parsing failed. 007d: fixme: hlsl_parser: declare_vars Complex initializers are not supported yet. Hardware: Geforce GTX 1060 (proprietary linux driver). -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 12

[Bug 19329] New: Program installs but client fails to connect to server
by wine-bugs＠winehq.org 24 Jan '20

24 Jan '20

http://bugs.winehq.org/show_bug.cgi?id=19329 Summary: Program installs but client fails to connect to server Product: Wine Version: 1.1.25 Platform: PC URL: http://www.livezilla.net/ OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: junk(a)mandd.com Using Wine 1.1.25 and a clean ~/.wine, I had to install dotnet20 and ie6 (I used winetricks) before the installer would complete. After that the Livezilla client will run. But when I try to connect to a Livezilla server, an error window pops up stating: -------------------------------------------------------------------- The underlying connection was closed: The connection was closed unexpectedly. Further information: The underlying connection was closed: The connection was closed unexpectedly. -------------------------------------------------------------------- -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 41

[Bug 34865] New: Can't execute mingw toolchain provided by Rtools
by wine-bugs＠winehq.org 23 Jan '20

23 Jan '20

http://bugs.winehq.org/show_bug.cgi?id=34865 Bug #: 34865 Summary: Can't execute mingw toolchain provided by Rtools Product: Wine Version: 1.7.4 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: mail(a)kirill-mueller.de Classification: Unclassified I can't execute "R CMD INSTALL" on an installation of R + Rtools in Wine (latest version from PPA "ppa:ubuntu-wine/ppa"). A reproducible script and console output can be found here: https://gist.github.com/krlmlr/7333242 . The script will set and write to $WINEPREFIX and download to $DOWNLOAD_DIR. Unfortunately, the logs do not show enough detail. After the line `about to run R CMD SHLIB -o kimisc.dll rcpp_hello_world.cpp RcppExports.cpp --debug`, a call to `gcc` is made. (I have added the output of the same call on my Linux system to the Gist.) To me, it seems that the calling process is not notified when the child process has completed, and it stops after a timeout. My hope is that this has been seen before and that there's an easy fix. I'm really new to Wine. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 11