November 2021 - Wine-bugs - list.winehq.org

[Bug 50577] New: Saya no Uta: hangs on RtlpWaitForCriticalSection
by WineHQ Bugzilla 27 Jun '25

27 Jun '25

https://bugs.winehq.org/show_bug.cgi?id=50577 Bug ID: 50577 Summary: Saya no Uta: hangs on RtlpWaitForCriticalSection Product: Wine Version: 6.0 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: ntdll Assignee: wine-bugs(a)winehq.org Reporter: pernegger(a)gmail.com Distribution: --- Created attachment 69251 --> https://bugs.winehq.org/attachment.cgi?id=69251 terminal output at default settings Note: This is about the Japanese "Windows 10 compatible" release, not an English localised one. There is no demo version, I'm afraid. The game runs fine--until it hangs at: 012c:err:ntdll:RtlpWaitForCriticalSection section 103971A4 "?" wait timed out in thread 012c, blocked by 0024, retrying (60 sec) The hang may happen, after as little as 1 min, sometimes it's 10 min, and I might have made it 20 min once. When it happens, it does not recover, the message just repeats every once in a while. I'm using the Ubuntu packages from the official winehq repo. Originally I tried with wine-staging 6.0, then I went backwards version by version through (wine-staging) 5.18, and finally now I'm on (wine-devel) 6.0 for this bug report. No discernable difference either way. The run in the attached log happened in a clean prefix (though I admit I may have forgotten to wipe the prefix between some downgrades). -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 13

[Bug 42796] New: X11DRV_ActivateKeyboardLayout spam during GTA5 run
by wine-bugs＠winehq.org 27 Jun '25

27 Jun '25

https://bugs.winehq.org/show_bug.cgi?id=42796 Bug ID: 42796 Summary: X11DRV_ActivateKeyboardLayout spam during GTA5 run Product: Wine Version: 2.5 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: winex11.drv Assignee: wine-bugs(a)winehq.org Reporter: winetest(a)luukku.com Distribution: --- I just tested wine-staging 2.5 against GTA5. And I get my console spammed annoying amount of These 3 lines group of 3. fixme:keyboard:X11DRV_ActivateKeyboardLayout 0x4090409, 40000000: semi-stub! fixme:keyboard:X11DRV_ActivateKeyboardLayout flags 40000000 not supported fixme:dxgi:dxgi_swapchain_Present Unimplemented flags 0x1 The keyboard spam comes from here https://source.winehq.org/git/wine.git/blob/61a1a266faa9fa7c959136b0ab0b5d7… Maybe priting the message few times and putting rest of the spam into TRACE? Since bug 42017 got fixed the output is much cleaner now. This is just enchanment request to get better looking logs by default. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 10

[Bug 47985] New: SysListView32 header are not rendered
by WineHQ Bugzilla 27 Jun '25

27 Jun '25

https://bugs.winehq.org/show_bug.cgi?id=47985 Bug ID: 47985 Summary: SysListView32 header are not rendered Product: Wine Version: 4.18 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: comctl32 Assignee: wine-bugs(a)winehq.org Reporter: bitter.taste(a)gmx.com Distribution: --- This problem can be noticed if one tries to use LTSpice [1], places a Capacitor in the schematic, right clicks on it and then on "Select Capacitor". The window that opens has a blank space where the header is supposed to be, resizing the windows makes the header appear and clicking on the headers themselves makes them appear for a brief instant. [1] https://www.analog.com/en/design-center/design-tools-and-calculators/ltspic… -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 7

[Bug 38889] New: Microsoft Orca unable to create transform file
by wine-bugs＠winehq.org 27 Jun '25

27 Jun '25

https://bugs.winehq.org/show_bug.cgi?id=38889 Bug ID: 38889 Summary: Microsoft Orca unable to create transform file Product: Wine Version: 1.6.2 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: critical Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: crosstieger(a)gmail.com Distribution: --- Created attachment 51827 --> https://bugs.winehq.org/attachment.cgi?id=51827 terminal output of the error Microsoft Orca is unable to modify cells within an .msi file. Modifying a cell returns the following error message: Could not change this cell to '<Value>'. The data was rejected by the database. It may be out of the valid range or formatted incorrectly. In the terminal you can see the error message: fixme:msidb:TABLE_modify 0x7a5098 4 0x7a5e40 - mode not implemented The value 0x7a5098 and 0x7a5e40 changes depending on the cell you edit. If you click on 'Transform - Generate Transform' and want to save your .MST file, it returns the error: Orca was unable to generate the transform. (MSI Error 120) On the terminal: fixme:msi:MsiDatabaseGenerateTransformW 3 2 L"Z:\\home\\techniktriberg\\Downloads\Untitled.mst" 0 0 The path depends on where you want to save the file. Full terminal output as an attachment. ---- Installation process ---- run: winetricks dotnet40 run: winetricks mfc42 run: msiexec -i Orca.Msi -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 11

[Bug 51064] New: Crash from Starcraft 2 game in Direct Strike mode
by WineHQ Bugzilla 26 Jun '25

26 Jun '25

https://bugs.winehq.org/show_bug.cgi?id=51064 Bug ID: 51064 Summary: Crash from Starcraft 2 game in Direct Strike mode Product: Wine-staging Version: 6.7 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: terapy-session(a)bk.ru CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com Distribution: --- Created attachment 69922 --> https://bugs.winehq.org/attachment.cgi?id=69922 screen The bug is manifested for a long time. 100% repeatability. Through Proton no problem. The problem is only in this mode. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 18

[Bug 48283] New: Pegasus Mail 4.73 crashes after install
by WineHQ Bugzilla 25 Jun '25

25 Jun '25

https://bugs.winehq.org/show_bug.cgi?id=48283 Bug ID: 48283 Summary: Pegasus Mail 4.73 crashes after install Product: Wine Version: 4.0.3 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: daveypy(a)outlook.com Distribution: --- Created attachment 65965 --> https://bugs.winehq.org/attachment.cgi?id=65965 Saved backtrace from crash After installing Pegasus Mail in Wine, Pegasus Mail crashes upon launch. I would be willing to test this in Wine STAGING, but I don't know how to install STAGING alongside STABLE in Ubuntu. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 5

[Bug 35684] New: Wine Internet Explorer crash when accessing amazon.com
by wine-bugs＠winehq.org 24 Jun '25

24 Jun '25

http://bugs.winehq.org/show_bug.cgi?id=35684 Bug ID: 35684 Summary: Wine Internet Explorer crash when accessing amazon.com Product: Wine Version: 1.7.13 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: daniel.maccabe(a)gmail.com Created attachment 47650 --> http://bugs.winehq.org/attachment.cgi?id=47650 Backtrace of Wine failure when accessing amazon.com OS: Linux Mint 16 (Petra) with KDE desktop Using Wine 1.7.13 in WIN7 mode (also tried WIN XP mode) Running Wine internet explorer from C:\program files (x86) Internet Explorer seems to start normally, although slowly. The Winehq web page loads and appears to render correctly. If I try to access www.amazon.com (http, or https) the program experiences an error and quits. The following window is displayed: report says: Program Error The program iexplore.exe has encountered a serious problem and needs to close. We are sorry for the inconvenience. This can be caused by a problem in the program or a deficiency in Wine. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 5

[Bug 44236] New: Poisson Superfish: Slow to write binary file.
by wine-bugs＠winehq.org 23 Jun '25

23 Jun '25

https://bugs.winehq.org/show_bug.cgi?id=44236 Bug ID: 44236 Summary: Poisson Superfish: Slow to write binary file. Product: Wine Version: 2.21 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: cmd Assignee: wine-bugs(a)winehq.org Reporter: raphaelcervantes(a)protonmail.com Distribution: --- Discussion is in this forum. https://forum.winehq.org/viewtopic.php?f=2&t=29936 I am using Wine to run Poisson Superfish. This program essentially does some calculations and then writes the results into a binary file. This action is performed in less than a second in a Windows environment. Unfortunately, it takes about 10 seconds to write this binary file under Wine. Here is how to reproduce the error: 1. Install Poisson Superfish on linux using Wine. You have to scroll all the way down and click register. http://laacg.lanl.gov/laacg/services/download_sf.phtml 2. Once installed, open a unix terminal in this directory .../.wine/drive_c/LANL/Examples/RadioFrequency/Waveguides/ 3. Run wineconsole cmd. 4. In the new window, run RUNWG.BAT. 3. Several windows will pop up. The ones that stall for a bit are in the process of writing to a file named something.T35. The T35 refers to tape 35 (I guess that's how a sector of harddrive memory would be referred as back in the 80s). This is the binary file with the solution in it. It will finish eventually, but it is pretty slow. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 8

[Bug 44253] New: Access violation in multiple cases
by wine-bugs＠winehq.org 23 Jun '25

23 Jun '25

https://bugs.winehq.org/show_bug.cgi?id=44253 Bug ID: 44253 Summary: Access violation in multiple cases Product: Wine Version: 3.0-rc3 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: critical Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: ihormcd+wine(a)gmail.com Distribution: --- Created attachment 60052 --> https://bugs.winehq.org/attachment.cgi?id=60052 crash Access violation exception due to access by 0x0000 address in multiple use cases while using Far3. >From Far app try to: 1) on lunch of EXE file (Far.exe, WinMergeU.exe, others) 2) switch drive for the pane (Alt+F1/F2) 3) switch to Quick view mode for a file (Ctrl+Q) *) few other cases App: Far Manager 3.0 build 5100 x64 Wine details: wine-3.0-rc3, the app runs using wineconsole -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 17

[Bug 46552] New: Crossfire doesn't install
by wine-bugs＠winehq.org 20 Jun '25

20 Jun '25

https://bugs.winehq.org/show_bug.cgi?id=46552 Bug ID: 46552 Summary: Crossfire doesn't install Product: Wine Version: 4.0-rc7 Hardware: x86-64 URL: http://crossfire.z8games.com/download.html OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: luca.finizio.mgbx(a)hotmail.it Distribution: Mint Created attachment 63423 --> https://bugs.winehq.org/attachment.cgi?id=63423 console output I already reported a bug about Crossfire EU (you can find it here https://bugs.winehq.org/show_bug.cgi?id=45920) but now it merged with Crossfire NA and the new link for download is http://crossfire.z8games.com/download.html The .exe file is different than before, but it doesn't install yet; I don't know if the problem is the same or not. I attached my console output. You can reproduce the bug just by downloading the file and trying to install. I kept my terminal open for more than 3 hours beacuse the process is "running" and if I close the terminal it says that a process is still running and closing the terminal will kill it. Therefore I don't know if my console output is complete or not. If I can help in some way, just tell me! :) -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 20