December 2016 - Wine-devel - list.winehq.org

WineHQ packages for 1.9.24
by Rosanne DiMesio 06 Dec '16

06 Dec '16

WineHQ packages for 1.9.24 still haven't been built for any of the distros, and users are asking about them. What's going on? -- Rosanne DiMesio dimesio(a)earthlink.net

3 2

Serial port sniffing problem
by Bill Lionheart 06 Dec '16

06 Dec '16

Using Wine version 1.8 on Ubuntu 14.04.5 I'm trying to use a AVRT5 APRS amateur radio GPRS tracker which has a serial interface. The device is supplied with a Prolific USB serial converter which comes up as /dev/ttyUSB0 which I have sym linked to COM1 The bundled GPRS tracker config software installs and runs OK under Wine. But my attempts to sniff the serial port traffic fails using all the standard Linux methods I know. I also tried using the Windows program Serial Port Monitor under Wine http://www.eltima.com/products/serial-port-monitor/ . This program says it cannot detect any serial ports. Under Windows 7 the config program and Serial Port Monitor both work well and I can intercept all the serial traffic Any ideas please folks? Bill

3 4

Calling msvcp90 (C++) functions from Wine code
by Lauri Kenttä 06 Dec '16

06 Dec '16

Hey, In a patch [1] I ended up recreating a function that practically exists already in msvcp90 as tr2_sys__Equivalent_wchar. However, I'm guessing it's not okay to call tr2_sys__Equivalent_wchar directly, since it's really a C++ function. Is there some valid and portable way to use this tr2_sys__Equivalent_wchar within another part of Wine (in this case, cmd.exe), to avoid duplicate code? [1] http://source.winehq.org/patches/data/128310 -- Lauri Kenttä

3 3

Re: [PATCH] user32: Handle WM_SYSKEYDOWN in MENU_SuspendPopup.
by Alexandre Julliard 06 Dec '16

06 Dec '16

Alex Henrie <alexhenrie24(a)gmail.com> writes: > Technically, all the stuff about WM_SYSKEYDOWN is unnecessary. All we > really need to do is fix the error handling, or remove this questionable > optimization altogether. I'm not sure what you mean by that. Also you are essentially reverting d75b0cdc986f464f3067767cd53aca6b85feb366, I'd like to hear some justification for that. -- Alexandre Julliard julliard(a)winehq.org

2 5

Re: [PATCH v3] cmd: Fix copying when the dest is one of the sources.
by Marvin 05 Dec '16

05 Dec '16

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=27154 Your paranoid android. === wvistau64 (32 bit) === batch.c:313: Test failed: unexpected char 0x27 position 0 in line 534 (got ''--a--c---'', wanted ''--a------'@or_broken@'--a--------'@or_broken@'%~ai'') === wvistau64 (64 bit) === batch.c:313: Test failed: unexpected char 0x27 position 0 in line 534 (got ''--a--c---'', wanted ''--a------'@or_broken@'--a--------'@or_broken@'%~ai'')

1 0

Re: [PATCH v2] cmd: Fix copying when the dest is one of the sources.
by Marvin 05 Dec '16

05 Dec '16

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=27152 Your paranoid android. === wvistau64 (32 bit) === batch.c:313: Test failed: unexpected char 0x27 position 0 in line 534 (got ''--a--c---'', wanted ''--a------'@or_broken@'--a--------'@or_broken@'%~ai'') === wvistau64 (64 bit) === batch.c:313: Test failed: unexpected char 0x27 position 0 in line 534 (got ''--a--c---'', wanted ''--a------'@or_broken@'--a--------'@or_broken@'%~ai'')

1 0

Re: kernel32: Implement Process thread attribute lists.
by Dmitry Timoshkov 05 Dec '16

05 Dec '16

Huw Davies <huw(a)codeweavers.com> wrote: > diff --git a/dlls/kernel32/kernel32.spec b/dlls/kernel32/kernel32.spec > index 3c25286..224e6ae 100644 > --- a/dlls/kernel32/kernel32.spec > +++ b/dlls/kernel32/kernel32.spec ... > +@ stdcall DeleteProcThreadAttributeList(ptr) ... > +@ stdcall InitializeProcThreadAttributeList(ptr long long ptr) ... > +@ stdcall UpdateProcThreadAttribute(ptr long long ptr long ptr ptr) UMS (User Mode Scheduler) stuff should be implemented in ntdll and kernel32 APIs should be either forwards or thin wrappers around the ntdll exports. So, to avoid duplicate efforts this all from the start needs to be implemeted in ntdll. -- Dmitry.

2 5

Re: [PATCH] ws2_32: Implement automatic broadcast for UDP sockets on sendto() (try 2)
by Hans Leidekker 05 Dec '16

05 Dec '16

On Sat, 2016-12-03 at 00:15 -0200, Bruno Jesus wrote: > @@ -2446,8 +2476,32 @@ static int WS2_send( int fd, struct ws2_async *wsa, int flags ) > return -1; > } > > + if (wsa->addr->sa_family == WS_AF_INET) > + { > + /* When the target IPv4 address ends in 255 we are going to check if > + * it matches the broadcast address. Trying to send the packet without > + * setting SO_BROADCAST results in EACCES, to avoid that we will enable > + * the flag and send the packet, after that we will restore the flag > + * This is the most common estimate to reduce the number of UDP packets > + * that we need to check. */ > + struct sockaddr_in *addr = (struct sockaddr_in*) hdr.msg_name; > + in_addr_t address = addr->sin_addr.s_addr; > + > + if (address != INADDR_BROADCAST && (address & 0xFF000000) == 0xFF000000) This doesn't work for a /25 network, for example. You really need to use the network mask here to calculate the broadcast address. > +/* required for broadcast tests */ > +static void disable_firewall(void) > +{ > + system("netsh firewall set opmode disable"); /* XP */ > + system("netsh Advfirewall set allprofiles state off"); /* >= Vista*/ > +} > + > +static void enable_firewall(void) > +{ > + system("netsh firewall set opmode enable"); /* XP */ > + system("netsh Advfirewall set allprofiles state on"); /* >= Vista*/ > +} This will not work if the test is run as an unprivileged user. It would be better to use an API like INetFwMgr and skip the affected tests when you can't modify the firewall. I'm working on a fix for a similar problem in the rpcrt4 test. I can share a patch if you're interested.

3 6

Re: [PATCH v2] wined3d: Implement SM5 atomic_umax/min instructions.
by Józef Kucia 05 Dec '16

05 Dec '16

On Sun, Dec 4, 2016 at 6:49 PM, Kimmo Myllyvirta <kimmo.myllyvirta(a)gmail.com> wrote: > @@ -897,6 +899,8 @@ static const struct wined3d_sm4_opcode_info opcode_table[] = > {WINED3D_SM5_OP_LD_STRUCTURED, WINED3DSIH_LD_STRUCTURED, "u", "iiR"}, > {WINED3D_SM5_OP_STORE_STRUCTURED, WINED3DSIH_STORE_STRUCTURED, "U", "iiu"}, > {WINED3D_SM5_OP_ATOMIC_IADD, WINED3DSIH_ATOMIC_IADD, "U", "ii"}, >+ {WINED3D_SM5_OP_ATOMIC_UMAX, WINED3DSIH_ATOMIC_UMAX, "U", "uu"}, >+ {WINED3D_SM5_OP_ATOMIC_UMIN, WINED3DSIH_ATOMIC_UMIN, "U", "uu"}, This is wrong. The generated GLSL code will produce compiler errors. FWIW, I should have patches for various atomics with some tests soon.

2 1

Re: [PATCH 03/18] d3d11/tests: Add test for depth/stencil shader resource views.
by Henri Verbeet 05 Dec '16

05 Dec '16

On 5 December 2016 at 12:04, Józef Kucia <jkucia(a)codeweavers.com> wrote: > Signed-off-by: Józef Kucia <jkucia(a)codeweavers.com> > --- > dlls/d3d11/tests/d3d11.c | 335 +++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 335 insertions(+) > This fails here on Windows: d3d11.c:6524: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6528: Test failed: Got unexpected value 0.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6532: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6550: Test failed: Got unexpected value 6.00000024e-001 at (0, 0), sub-resource 0. d3d11.c:6554: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6578: Test failed: Got unexpected value 0.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6582: Test failed: Got unexpected value 1.00000000e+002 at (0, 0), sub-resource 0. d3d11.c:6590: Test failed: Got unexpected value 2.55199997e+002 at (0, 0), sub-resource 0. d3d11.c:6594: Test failed: Got unexpected value 3.29999995e+000 at (0, 0), sub-resource 0. d3d11.c:6598: Test failed: Got unexpected value 4.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6524: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6528: Test failed: Got unexpected value 0.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6532: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6550: Test failed: Got unexpected value 6.00000024e-001 at (0, 0), sub-resource 0. d3d11.c:6554: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6524: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6528: Test failed: Got unexpected value 0.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6532: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6550: Test failed: Got unexpected value 6.00000024e-001 at (0, 0), sub-resource 0. d3d11.c:6554: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6578: Test failed: Got unexpected value 0.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6582: Test failed: Got unexpected value 1.00000000e+002 at (0, 0), sub-resource 0. d3d11.c:6590: Test failed: Got unexpected value 2.55199997e+002 at (0, 0), sub-resource 0. d3d11.c:6594: Test failed: Got unexpected value 3.29999995e+000 at (0, 0), sub-resource 0. d3d11.c:6598: Test failed: Got unexpected value 4.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6524: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6528: Test failed: Got unexpected value 0.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6532: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0. d3d11.c:6550: Test failed: Got unexpected value 6.00000024e-001 at (0, 0), sub-resource 0. d3d11.c:6554: Test failed: Got unexpected value 1.00000000e+000 at (0, 0), sub-resource 0.

1 0