October 2021 - Wine-devel - list.winehq.org

[PATCH 1/9] tools/winedump: fix incorrect alignment
by Eric Pouech 12 Oct '21

12 Oct '21

(BTW dbghelp is already doing the right thing) --- tools/winedump/msc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/winedump/msc.c b/tools/winedump/msc.c index 2c3d406347e..b7b7eb435ff 100644 --- a/tools/winedump/msc.c +++ b/tools/winedump/msc.c @@ -1161,7 +1161,7 @@ BOOL codeview_dump_types_from_block(const void* table, unsigned long len) codeview_dump_one_type(curr_type, type); curr_type++; - ptr += (type->generic.len + 2 + 3) & ~3; + ptr += type->generic.len + 2; } return TRUE;

3 10

[PATCH vkd3d 01/10] vkd3d: Use minimum width/height/layer framebuffer.
by Conor McCarthy 12 Oct '21

12 Oct '21

All attachments must be at least as large as the framebuffer; using a max operator is not compliant with Vulkan (VUID-VkFramebufferCreateInfo-flags-04533, etc). From: Hans-Kristian Arntzen <post(a)arntzen-software.no> Signed-off-by: Conor McCarthy <cmccarthy(a)codeweavers.com> --- libs/vkd3d/command.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/libs/vkd3d/command.c b/libs/vkd3d/command.c index 9f4a4149..e81feea4 100644 --- a/libs/vkd3d/command.c +++ b/libs/vkd3d/command.c @@ -4517,6 +4517,7 @@ static void STDMETHODCALLTYPE d3d12_command_list_OMSetRenderTargets(ID3D12Graphi BOOL single_descriptor_handle, const D3D12_CPU_DESCRIPTOR_HANDLE *depth_stencil_descriptor) { struct d3d12_command_list *list = impl_from_ID3D12GraphicsCommandList2(iface); + const VkPhysicalDeviceLimits *limits = &list->device->vk_info.device_limits; const struct d3d12_rtv_desc *rtv_desc; const struct d3d12_dsv_desc *dsv_desc; VkFormat prev_dsv_format; @@ -4535,9 +4536,9 @@ static void STDMETHODCALLTYPE d3d12_command_list_OMSetRenderTargets(ID3D12Graphi render_target_descriptor_count = ARRAY_SIZE(list->rtvs); } - list->fb_width = 0; - list->fb_height = 0; - list->fb_layer_count = 0; + list->fb_width = limits->maxFramebufferWidth; + list->fb_height = limits->maxFramebufferHeight; + list->fb_layer_count = limits->maxFramebufferLayers; for (i = 0; i < render_target_descriptor_count; ++i) { if (single_descriptor_handle) @@ -4567,9 +4568,9 @@ static void STDMETHODCALLTYPE d3d12_command_list_OMSetRenderTargets(ID3D12Graphi } list->rtvs[i] = view->u.vk_image_view; - list->fb_width = max(list->fb_width, rtv_desc->width); - list->fb_height = max(list->fb_height, rtv_desc->height); - list->fb_layer_count = max(list->fb_layer_count, rtv_desc->layer_count); + list->fb_width = min(list->fb_width, rtv_desc->width); + list->fb_height = min(list->fb_height, rtv_desc->height); + list->fb_layer_count = min(list->fb_layer_count, rtv_desc->layer_count); } prev_dsv_format = list->dsv_format; @@ -4591,9 +4592,9 @@ static void STDMETHODCALLTYPE d3d12_command_list_OMSetRenderTargets(ID3D12Graphi } list->dsv = view->u.vk_image_view; - list->fb_width = max(list->fb_width, dsv_desc->width); - list->fb_height = max(list->fb_height, dsv_desc->height); - list->fb_layer_count = max(list->fb_layer_count, dsv_desc->layer_count); + list->fb_width = min(list->fb_width, dsv_desc->width); + list->fb_height = min(list->fb_height, dsv_desc->height); + list->fb_layer_count = min(list->fb_layer_count, dsv_desc->layer_count); list->dsv_format = dsv_desc->format->vk_format; } else -- 2.32.0

2 10

[PATCH vkd3d 9/9] tests: Add a UINT_MAX layer count test to test_clear_depth_stencil_view().
by Henri Verbeet 12 Oct '21

12 Oct '21

From: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- v2: Unmodified resend of patch 215659. tests/d3d12.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/tests/d3d12.c b/tests/d3d12.c index 9e4dcb5b..5593393e 100644 --- a/tests/d3d12.c +++ b/tests/d3d12.c @@ -4485,6 +4485,17 @@ static void test_clear_depth_stencil_view(void) reset_command_list(command_list, context.allocator); } + transition_resource_state(command_list, ds.texture, + D3D12_RESOURCE_STATE_COPY_SOURCE, D3D12_RESOURCE_STATE_DEPTH_WRITE); + dsv_desc.Texture2DArray.ArraySize = UINT_MAX; + ID3D12Device_CreateDepthStencilView(device, ds.texture, &dsv_desc, ds.dsv_handle); + ID3D12GraphicsCommandList_ClearDepthStencilView(command_list, ds.dsv_handle, + D3D12_CLEAR_FLAG_DEPTH, expected_values[4], 0, 0, NULL); + + transition_resource_state(command_list, ds.texture, + D3D12_RESOURCE_STATE_DEPTH_WRITE, D3D12_RESOURCE_STATE_COPY_SOURCE); + check_sub_resource_float(ds.texture, 5, queue, command_list, expected_values[4], 1); + destroy_depth_stencil(&ds); destroy_test_context(&context); } -- 2.20.1

1 0

[PATCH vkd3d 8/9] tests: Add UINT_MAX layer count tests to test_clear_render_target_view().
by Henri Verbeet 12 Oct '21

12 Oct '21

From: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- v2: Unmodified resend of patch 215658. tests/d3d12.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/tests/d3d12.c b/tests/d3d12.c index ac1e24da..9e4dcb5b 100644 --- a/tests/d3d12.c +++ b/tests/d3d12.c @@ -4672,7 +4672,7 @@ static void test_clear_render_target_view(void) rtv_desc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; rtv_desc.ViewDimension = D3D12_RTV_DIMENSION_TEXTURE2DARRAY; rtv_desc.Texture2DArray.FirstArraySlice = i; - rtv_desc.Texture2DArray.ArraySize = 1; + rtv_desc.Texture2DArray.ArraySize = (i == ARRAY_SIZE(array_colors) - 1) ? UINT_MAX : 1; ID3D12Device_CreateRenderTargetView(device, resource, &rtv_desc, rtv_handle); @@ -4703,7 +4703,7 @@ static void test_clear_render_target_view(void) rtv_desc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; rtv_desc.ViewDimension = D3D12_RTV_DIMENSION_TEXTURE2DMSARRAY; rtv_desc.Texture2DMSArray.FirstArraySlice = i; - rtv_desc.Texture2DMSArray.ArraySize = 1; + rtv_desc.Texture2DMSArray.ArraySize = (i == ARRAY_SIZE(array_colors) - 1) ? UINT_MAX : 1; ID3D12Device_CreateRenderTargetView(device, resource, &rtv_desc, rtv_handle); @@ -4759,6 +4759,23 @@ static void test_clear_render_target_view(void) check_readback_data_uint(&rb, &box, 0xbf4c7f19, 1); release_resource_readback(&rb); + rtv_desc.Texture3D.FirstWSlice = 30; + rtv_desc.Texture3D.WSize = UINT_MAX; + ID3D12Device_CreateRenderTargetView(device, resource, &rtv_desc, rtv_handle); + + reset_command_list(command_list, context.allocator); + transition_resource_state(command_list, resource, + D3D12_RESOURCE_STATE_COPY_SOURCE, D3D12_RESOURCE_STATE_RENDER_TARGET); + ID3D12GraphicsCommandList_ClearRenderTargetView(command_list, rtv_handle, green, 0, NULL); + transition_resource_state(command_list, resource, + D3D12_RESOURCE_STATE_RENDER_TARGET, D3D12_RESOURCE_STATE_COPY_SOURCE); + get_texture_readback_with_command_list(resource, 0, &rb, queue, command_list); + set_box(&box, 0, 0, 4, 32, 32, 30); + check_readback_data_uint(&rb, &box, 0xbf4c7f19, 1); + set_box(&box, 0, 0, 30, 32, 32, 32); + check_readback_data_uint(&rb, &box, 0xff00ff00, 1); + release_resource_readback(&rb); + ID3D12Resource_Release(resource); ID3D12DescriptorHeap_Release(rtv_heap); destroy_test_context(&context); -- 2.20.1

1 0

[PATCH vkd3d 7/9] tests: Test a UINT_MAX layer count in test_clear_unordered_access_view_image().
by Henri Verbeet 12 Oct '21

12 Oct '21

From: Conor McCarthy <cmccarthy(a)codeweavers.com> Testing without the fixes in vkd3d_create_texture_uav() has nasty results in radv and possibly others. Signed-off-by: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- v2: Mostly unmodified resend of patch 215657. tests/d3d12.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tests/d3d12.c b/tests/d3d12.c index d1337e27..ac1e24da 100644 --- a/tests/d3d12.c +++ b/tests/d3d12.c @@ -5014,6 +5014,8 @@ static void test_clear_unordered_access_view_image(void) {0x3f000000, 0, 0, 0}, 0x3f000000, true}, {DXGI_FORMAT_R32_FLOAT, 1, IMAGE_SIZE, 0, 3, 2, 0, {}, {0x3f000000, 0, 0, 0}, 0x3f000000, true}, + /* Test clearing a UINT_MAX layer count. */ + {DXGI_FORMAT_R32_FLOAT, 1, IMAGE_SIZE, 0, 0, UINT_MAX, 0, {}, {1, 0, 0, 0}, 1}, /* Test a single clear rect. */ {DXGI_FORMAT_R32_FLOAT, 1, 1, 0, 0, 1, 1, {{1, 2, IMAGE_SIZE - 4, IMAGE_SIZE - 2}}, {1, 0, 0, 0}, 1}, -- 2.20.1

1 0

[PATCH vkd3d 6/9] vkd3d: Normalise layer counts in d3d12_desc_create_srv().
by Henri Verbeet 12 Oct '21

12 Oct '21

I'm not aware of any issue caused by not normalising SRV layer counts, but this makes it consistent with the other view types. Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- libs/vkd3d/resource.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/libs/vkd3d/resource.c b/libs/vkd3d/resource.c index bf01a64c..d6e5d4be 100644 --- a/libs/vkd3d/resource.c +++ b/libs/vkd3d/resource.c @@ -2753,6 +2753,7 @@ void d3d12_desc_create_srv(struct d3d12_desc *descriptor, FIXME("Ignoring plane slice %u.\n", desc->u.Texture2DArray.PlaneSlice); if (desc->u.Texture2DArray.ResourceMinLODClamp) FIXME("Unhandled min LOD clamp %.8e.\n", desc->u.Texture2DArray.ResourceMinLODClamp); + vkd3d_texture_view_desc_normalise(&vkd3d_desc, &resource->desc); break; case D3D12_SRV_DIMENSION_TEXTURE2DMS: vkd3d_desc.view_type = VK_IMAGE_VIEW_TYPE_2D; @@ -2761,6 +2762,7 @@ void d3d12_desc_create_srv(struct d3d12_desc *descriptor, vkd3d_desc.view_type = VK_IMAGE_VIEW_TYPE_2D_ARRAY; vkd3d_desc.layer_idx = desc->u.Texture2DMSArray.FirstArraySlice; vkd3d_desc.layer_count = desc->u.Texture2DMSArray.ArraySize; + vkd3d_texture_view_desc_normalise(&vkd3d_desc, &resource->desc); break; case D3D12_SRV_DIMENSION_TEXTURE3D: vkd3d_desc.view_type = VK_IMAGE_VIEW_TYPE_3D; @@ -2783,10 +2785,11 @@ void d3d12_desc_create_srv(struct d3d12_desc *descriptor, vkd3d_desc.miplevel_count = desc->u.TextureCubeArray.MipLevels; vkd3d_desc.layer_idx = desc->u.TextureCubeArray.First2DArrayFace; vkd3d_desc.layer_count = desc->u.TextureCubeArray.NumCubes; - if (vkd3d_desc.layer_count != VK_REMAINING_ARRAY_LAYERS) + if (vkd3d_desc.layer_count != UINT_MAX) vkd3d_desc.layer_count *= 6; if (desc->u.TextureCubeArray.ResourceMinLODClamp) FIXME("Unhandled min LOD clamp %.8e.\n", desc->u.TextureCubeArray.ResourceMinLODClamp); + vkd3d_texture_view_desc_normalise(&vkd3d_desc, &resource->desc); break; default: FIXME("Unhandled view dimension %#x.\n", desc->ViewDimension); -- 2.20.1

1 0

[PATCH vkd3d 5/9] vkd3d: Normalise layer counts in d3d12_dsv_desc_create_dsv().
by Henri Verbeet 12 Oct '21

12 Oct '21

From: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- v2: Adjusted for changes earlier in the series. This supersedes patch 215656. libs/vkd3d/resource.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/libs/vkd3d/resource.c b/libs/vkd3d/resource.c index 30d7d2cf..bf01a64c 100644 --- a/libs/vkd3d/resource.c +++ b/libs/vkd3d/resource.c @@ -3296,6 +3296,7 @@ void d3d12_dsv_desc_create_dsv(struct d3d12_dsv_desc *dsv_desc, struct d3d12_dev vkd3d_desc.miplevel_idx = desc->u.Texture2DArray.MipSlice; vkd3d_desc.layer_idx = desc->u.Texture2DArray.FirstArraySlice; vkd3d_desc.layer_count = desc->u.Texture2DArray.ArraySize; + vkd3d_texture_view_desc_normalise(&vkd3d_desc, &resource->desc); break; case D3D12_DSV_DIMENSION_TEXTURE2DMS: vkd3d_desc.view_type = VK_IMAGE_VIEW_TYPE_2D; @@ -3304,6 +3305,7 @@ void d3d12_dsv_desc_create_dsv(struct d3d12_dsv_desc *dsv_desc, struct d3d12_dev vkd3d_desc.view_type = VK_IMAGE_VIEW_TYPE_2D_ARRAY; vkd3d_desc.layer_idx = desc->u.Texture2DMSArray.FirstArraySlice; vkd3d_desc.layer_count = desc->u.Texture2DMSArray.ArraySize; + vkd3d_texture_view_desc_normalise(&vkd3d_desc, &resource->desc); break; default: FIXME("Unhandled view dimension %#x.\n", desc->ViewDimension); -- 2.20.1

1 0

[PATCH vkd3d 4/9] vkd3d: Normalise layer counts in d3d12_rtv_desc_create_rtv().
by Henri Verbeet 12 Oct '21

12 Oct '21

From: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- v2: Take the mip-level into account when calculating the maximum layer count for 3D textures. This supersedes patch 215655. libs/vkd3d/resource.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/libs/vkd3d/resource.c b/libs/vkd3d/resource.c index 854e73a3..30d7d2cf 100644 --- a/libs/vkd3d/resource.c +++ b/libs/vkd3d/resource.c @@ -2480,7 +2480,19 @@ static bool init_default_texture_view_desc(struct vkd3d_texture_view_desc *desc, static void vkd3d_texture_view_desc_normalise(struct vkd3d_texture_view_desc *desc, const D3D12_RESOURCE_DESC *resource_desc) { - unsigned int max_layer_count = resource_desc->DepthOrArraySize; + unsigned int max_layer_count; + + if (resource_desc->Dimension == D3D12_RESOURCE_DIMENSION_TEXTURE3D) + { + if (desc->view_type == VK_IMAGE_VIEW_TYPE_2D_ARRAY) + max_layer_count = max(1, resource_desc->DepthOrArraySize >> desc->miplevel_idx); + else + max_layer_count = 1; + } + else + { + max_layer_count = resource_desc->DepthOrArraySize; + } if (desc->layer_idx >= max_layer_count) { @@ -3186,6 +3198,7 @@ void d3d12_rtv_desc_create_rtv(struct d3d12_rtv_desc *rtv_desc, struct d3d12_dev vkd3d_desc.layer_count = desc->u.Texture2DArray.ArraySize; if (desc->u.Texture2DArray.PlaneSlice) FIXME("Ignoring plane slice %u.\n", desc->u.Texture2DArray.PlaneSlice); + vkd3d_texture_view_desc_normalise(&vkd3d_desc, &resource->desc); break; case D3D12_RTV_DIMENSION_TEXTURE2DMS: vkd3d_desc.view_type = VK_IMAGE_VIEW_TYPE_2D; @@ -3194,12 +3207,14 @@ void d3d12_rtv_desc_create_rtv(struct d3d12_rtv_desc *rtv_desc, struct d3d12_dev vkd3d_desc.view_type = VK_IMAGE_VIEW_TYPE_2D_ARRAY; vkd3d_desc.layer_idx = desc->u.Texture2DMSArray.FirstArraySlice; vkd3d_desc.layer_count = desc->u.Texture2DMSArray.ArraySize; + vkd3d_texture_view_desc_normalise(&vkd3d_desc, &resource->desc); break; case D3D12_RTV_DIMENSION_TEXTURE3D: vkd3d_desc.view_type = VK_IMAGE_VIEW_TYPE_2D_ARRAY; vkd3d_desc.miplevel_idx = desc->u.Texture3D.MipSlice; vkd3d_desc.layer_idx = desc->u.Texture3D.FirstWSlice; vkd3d_desc.layer_count = desc->u.Texture3D.WSize; + vkd3d_texture_view_desc_normalise(&vkd3d_desc, &resource->desc); break; default: FIXME("Unhandled view dimension %#x.\n", desc->ViewDimension); -- 2.20.1

1 0

[PATCH vkd3d 3/9] vkd3d: Normalise layer counts in vkd3d_create_texture_uav().
by Henri Verbeet 12 Oct '21

12 Oct '21

From: Conor McCarthy <cmccarthy(a)codeweavers.com> Passing UINT_MAX as layer count to Direct3D behaves similar to passing VK_REMAINING_ARRAY_LAYERS to Vulkan. Since these have the same value, everything usually works out even without normalisation. However, there are some exceptions; for example, we calculate workgroup counts for UAV clears from layer counts using vkd3d_compute_workgroup_count(), which doesn't handle UINT_MAX. Normalising layer counts during view creation avoids having to handle this issue in the rest of the code. Signed-off-by: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- v2: - Introduce a helper to normalise the view instead of a helper for the layer count. - Some improvements to the commit message. This supersedes patch 215654. libs/vkd3d/resource.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/libs/vkd3d/resource.c b/libs/vkd3d/resource.c index a51f5795..854e73a3 100644 --- a/libs/vkd3d/resource.c +++ b/libs/vkd3d/resource.c @@ -2477,6 +2477,27 @@ static bool init_default_texture_view_desc(struct vkd3d_texture_view_desc *desc, return true; } +static void vkd3d_texture_view_desc_normalise(struct vkd3d_texture_view_desc *desc, + const D3D12_RESOURCE_DESC *resource_desc) +{ + unsigned int max_layer_count = resource_desc->DepthOrArraySize; + + if (desc->layer_idx >= max_layer_count) + { + WARN("Layer index %u exceeds maximum available layer %u.\n", desc->layer_idx, max_layer_count - 1); + desc->layer_count = 1; + return; + } + + max_layer_count -= desc->layer_idx; + if (desc->layer_count <= max_layer_count) + return; + + if (desc->layer_count != UINT_MAX) + WARN("Layer count %u exceeds maximum %u.\n", desc->layer_count, max_layer_count); + desc->layer_count = max_layer_count; +} + bool vkd3d_create_texture_view(struct d3d12_device *device, VkImage vk_image, const struct vkd3d_texture_view_desc *desc, struct vkd3d_view **view) { @@ -2920,6 +2941,7 @@ static void vkd3d_create_texture_uav(struct d3d12_desc *descriptor, vkd3d_desc.layer_count = desc->u.Texture2DArray.ArraySize; if (desc->u.Texture2DArray.PlaneSlice) FIXME("Ignoring plane slice %u.\n", desc->u.Texture2DArray.PlaneSlice); + vkd3d_texture_view_desc_normalise(&vkd3d_desc, &resource->desc); break; case D3D12_UAV_DIMENSION_TEXTURE3D: vkd3d_desc.view_type = VK_IMAGE_VIEW_TYPE_3D; -- 2.20.1

1 0

[PATCH vkd3d 2/9] vkd3d-shader/spirv: Correctly handle bit shifts greater than 31 bits.
by Henri Verbeet 12 Oct '21

12 Oct '21

From: Conor McCarthy <cmccarthy(a)codeweavers.com> This is undefined behaviour in SPIR-V, but well-defined in Direct3D, so we should explicitly 'and' the shift amount with 31. Based on a vkd3d-proton patch by Philip Rebohle. Signed-off-by: Conor McCarthy <cmccarthy(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- v3: Minor modifications to the comment and commit message. This supersedes patch 216958. libs/vkd3d-shader/spirv.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/libs/vkd3d-shader/spirv.c b/libs/vkd3d-shader/spirv.c index ebaf1631..58bf3d9c 100644 --- a/libs/vkd3d-shader/spirv.c +++ b/libs/vkd3d-shader/spirv.c @@ -6840,6 +6840,21 @@ static void vkd3d_dxbc_compiler_emit_alu_instruction(struct vkd3d_dxbc_compiler for (i = 0; i < instruction->src_count; ++i) src_ids[i] = vkd3d_dxbc_compiler_emit_load_src(compiler, &src[i], dst->write_mask); + /* The SPIR-V specification states, "The resulting value is undefined if + * Shift is greater than or equal to the bit width of the components of + * Base." Direct3D applies only the lowest 5 bits of the shift. + * + * Microsoft fxc will compile immediate constants larger than 5 bits. + * Fixing up the constants would be more elegant, but the simplest way is + * to let this handle constants too. */ + if (instruction->handler_idx == VKD3DSIH_ISHL || instruction->handler_idx == VKD3DSIH_ISHR + || instruction->handler_idx == VKD3DSIH_USHR) + { + uint32_t mask_id = vkd3d_dxbc_compiler_get_constant_vector(compiler, + VKD3D_SHADER_COMPONENT_UINT, vkd3d_write_mask_component_count(dst->write_mask), 0x1f); + src_ids[1] = vkd3d_spirv_build_op_and(builder, type_id, src_ids[1], mask_id); + } + val_id = vkd3d_spirv_build_op_trv(builder, &builder->function_stream, op, type_id, src_ids, instruction->src_count); if (instruction->flags & VKD3DSI_PRECISE_XYZW) -- 2.20.1

1 0