[PATCH v6 0/4] Fix sock_recv reordering issue (#52401): unknown_status + wineserver call approach
<preamble> This is my forth attempt to tackle the issue #52401 [1]: "Improper synchronization in sock_recv/sock_send leads to arbitrary reordering of completion of I/O requests", which was initially reported (outside Bugzilla) by Dongwan Kim [2]. Basically, the old process of sock_recv is: 1. Perform the I/O synchronously. 2. Report the result back to the server, or queue up the request in the server. 3. If blocking, wait for I/O to complete. The new process of sock_recv would be: 1. Queue up the request in the server. 2. Perform the I/O synchronously. 3. Report the result back to the server, 4. If blocking, wait for I/O to complete. Everything except the actual I/O requires communicating with wineserver. My goal here is to fix the issue without introducing extra calls to wineserver. (However, if it turns out that this goal is not of utmost significance, then this patch serie can be easily modified so that it issues separate server calls.) The previous approaches are listed here: - Add a new select type called SELECT_SIGNAL_WAIT_ASYNC [3]. Zebediah has pointed out [4] that it is not very elegant to (ab-)use the synchronization machinery for communicating the async result. - Use APC_ASYNC_IO to perform the synchronous I/O [5]. This ended up with a total of 11 patches, and turned out to be rather too complicated for a simple task. - Add a new wineserver call, and use "add_queue" hook to save a round trip to the server [6]. </preamble> Each of the above turned out to be either too intrusive, complicated, or hard to verify. Per suggestion by Zebediah [7], this is my (hopefully) last approach: keep the new wineserver call, but keep out the implicit STATUS_PENDING transition from "add_queue"; also, (re-)use the "unknown_status" field. Changelog: - v1 -> v2: fix async queue hang on synchronous failure - v2 -> v3: rewrite handling of pending/failed asyncs. - v3 -> v4: don't set IOSB on synchronous failure, make more robust - v4 -> v5: address review comments - v5 -> v6: address review comments (mostly cosmetic), drop RFC status [1] https://bugs.winehq.org/show_bug.cgi?id=52401 [2] https://www.winehq.org/pipermail/wine-devel/2021-May/186454.html [3] https://www.winehq.org/pipermail/wine-devel/2022-January/204695.html [4] https://www.winehq.org/pipermail/wine-devel/2022-January/204710.html [5] https://www.winehq.org/pipermail/wine-devel/2022-January/205168.html [6] https://www.winehq.org/pipermail/wine-devel/2022-January/205193.html [7] https://www.winehq.org/pipermail/wine-devel/2022-January/205738.html Jinoh Kang (4): server: Allow calling async_handoff() with status code STATUS_ALERTED. server: Attempt to complete I/O request immediately in recv_socket. ntdll: Don't call try_recv before server call in sock_recv. server: Replace redundant recv_socket status fields with force_async boolean field. dlls/ntdll/unix/socket.c | 36 +++++++++-------- dlls/ntdll/unix/sync.c | 26 ++++++++++++ dlls/ntdll/unix/unix_private.h | 1 + dlls/ws2_32/tests/sock.c | 8 ++-- server/async.c | 72 ++++++++++++++++++++++++++++++++++ server/protocol.def | 14 ++++++- server/sock.c | 47 +++++++++++----------- 7 files changed, 159 insertions(+), 45 deletions(-) -- 2.34.1
If the server detects that an I/O request could be completed immediately (e.g. the socket to read from already has incoming data), it can now return STATUS_ALERTED to allow opportunistic synchronous I/O. The Unix side will then attempt to perform I/O in nonblocking mode and report back the I/O status to the server via the new server request "set_async_direct_result". If the operation returns e.g. EAGAIN or EWOULDBLOCK, the client can opt to either abandon the request (by specifying an error status) or poll for it in the server as usual (by waiting on the wait handle). Without such mechanism in place, the client cannot safely perform immediately satiable I/O operations synchronously, since it can potentially conflict with other pending I/O operations that have already been queued. Signed-off-by: Jinoh Kang <jinoh.kang.kr(a)gmail.com> --- Notes: v1 -> v2: dequeue async after failed completion v2 -> v3: - rewrite handling of pending/failed asyncs. - set async->alerted = 1 v3 -> v4: - add assert( async->iosb ); - make robust against abrupt transition/cancellation: don't return STATUS_ACCESS_DENIED on precondition failure (client won't know what to do with STATUS_ACCESS_DENIED anyway) - always return wait_handle if possible - clarify and rearrange comments v4 -> v5: - edit comments - /notify_async_direct_result/set_async_direct_result/g - remove assert( async->iosb ); - simplify complicated precondition - fail early if precondition unmet - don't forward status from async - don't use async_handoff(); open code relevant parts instead - remove irrelevant word in commit message (signal_wait_async) - async_handoff(): don't check for async->pending in new code path - async_handoff(): use async_terminate() directly in new code path v5 -> v6: - merge two patches into one - make comment case consistent server/async.c | 72 +++++++++++++++++++++++++++++++++++++++++++++ server/protocol.def | 10 +++++++ 2 files changed, 82 insertions(+) diff --git a/server/async.c b/server/async.c index 7aef28355f0..7d0ff10f7a4 100644 --- a/server/async.c +++ b/server/async.c @@ -338,6 +338,31 @@ obj_handle_t async_handoff( struct async *async, data_size_t *result, int force_ return async->wait_handle; } + if (get_error() == STATUS_ALERTED) + { + /* give the client opportunity to complete synchronously. after the + * client performs the I/O, it reports the result back to the server + * via the set_async_direct_result request. if it turns out that the + * I/O request is not actually immediately satiable, the client may + * then choose to re-queue the async by reporting STATUS_PENDING + * instead. + * + * since we're deferring the initial I/O (to the client), we mark the + * async as having unknown initial status (unknown_status = 1). note + * that we don't reuse async_set_unknown_status() here. this is because + * the one responsible for performing the I/O is not the device driver, + * but instead the client that requested the I/O in the first place. + * + * also, async_set_unknown_status() would set direct_result to zero + * forcing APC_ASYNC_IO to fire in async_terminate(), which is not + * useful due to subtle semantic differences between synchronous and + * asynchronous completion. + */ + async->unknown_status = 1; + async_terminate( async, STATUS_ALERTED ); + return async->wait_handle; + } + async->initial_status = get_error(); if (!async->pending && NT_ERROR( get_error() )) @@ -728,3 +753,50 @@ DECL_HANDLER(get_async_result) } set_error( iosb->status ); } + +/* notify direct completion of async and close the wait handle if not blocking */ +DECL_HANDLER(set_async_direct_result) +{ + struct async *async = (struct async *)get_handle_obj( current->process, req->handle, 0, &async_ops ); + unsigned int status = req->status; + + if (!async) return; + + if (!async->unknown_status || !async->terminated || !async->alerted) + { + set_error( STATUS_INVALID_PARAMETER ); + release_object( &async->obj ); + return; + } + + async_set_initial_status( async, status ); + + if (status == STATUS_PENDING) + { + async->direct_result = 0; + async->pending = 1; + } + + /* if the I/O has completed successfully, the client would have already + * set the IOSB. therefore, we can skip waiting on wait_handle and do + * async_set_result() directly. + */ + async_set_result( &async->obj, status, req->information ); + + /* close wait handle here to avoid extra server round trip, if the I/O + * either has completed, or is pending and not blocking. + */ + if (status != STATUS_PENDING || !async->blocking) + { + close_handle( async->thread->process, async->wait_handle ); + async->wait_handle = 0; + } + + /* report back to the client whether the wait handle has been closed. + * handle will be 0 if closed by us; otherwise the original value is + * retained + */ + reply->handle = async->wait_handle; + + release_object( &async->obj ); +} diff --git a/server/protocol.def b/server/protocol.def index 02e73047f9b..28dee7c48f7 100644 --- a/server/protocol.def +++ b/server/protocol.def @@ -2163,6 +2163,16 @@ enum message_type @END +/* Notify direct completion of async and close the wait handle if not blocking */ +(a)REQ(set_async_direct_result) + obj_handle_t handle; /* wait handle */ + unsigned int status; /* completion status */ + apc_param_t information; /* IO_STATUS_BLOCK Information */ +(a)REPLY + obj_handle_t handle; /* wait handle, or NULL if closed */ +(a)END + + /* Perform a read on a file object */ @REQ(read) async_data_t async; /* async I/O parameters */ -- 2.34.1
Signed-off-by: Zebediah Figura <zfigura(a)codeweavers.com>
Make recv_socket alert the async immediately if poll() call detects that there are incoming data in the socket, bypassing the wineserver's main polling loop. Signed-off-by: Jinoh Kang <jinoh.kang.kr(a)gmail.com> --- Notes: v3 -> v4: don't update IOSB on synchronous failure v4 -> v5: - Don't use "may_restart" flag; report nonblocking status directly to client - s/notify_async\(_direct_result\)\?/set_async_direct_result/g - don't return status from set_async_direct_result v5 -> v6: unchanged dlls/ntdll/unix/socket.c | 22 ++++++++++++++++++---- dlls/ntdll/unix/sync.c | 26 ++++++++++++++++++++++++++ dlls/ntdll/unix/unix_private.h | 1 + server/protocol.def | 1 + server/sock.c | 21 ++++++++++++++++++++- 5 files changed, 66 insertions(+), 5 deletions(-) diff --git a/dlls/ntdll/unix/socket.c b/dlls/ntdll/unix/socket.c index 71dfcdd1114..03a9a93d04a 100644 --- a/dlls/ntdll/unix/socket.c +++ b/dlls/ntdll/unix/socket.c @@ -686,6 +686,7 @@ static NTSTATUS sock_recv( HANDLE handle, HANDLE event, PIO_APC_ROUTINE apc, voi NTSTATUS status; unsigned int i; ULONG options; + BOOL nonblocking, alerted; if (unix_flags & MSG_OOB) { @@ -756,16 +757,29 @@ static NTSTATUS sock_recv( HANDLE handle, HANDLE event, PIO_APC_ROUTINE apc, voi status = wine_server_call( req ); wait_handle = wine_server_ptr_handle( reply->wait ); options = reply->options; - if ((!NT_ERROR(status) || wait_handle) && status != STATUS_PENDING) + nonblocking = reply->nonblocking; + } + SERVER_END_REQ; + + alerted = status == STATUS_ALERTED; + if (alerted) + { + status = try_recv( fd, async, &information ); + if (status == STATUS_DEVICE_NOT_READY && (force_async || !nonblocking)) + status = STATUS_PENDING; + } + + if (status != STATUS_PENDING) + { + if (!NT_ERROR(status) || (wait_handle && !alerted)) { io->Status = status; io->Information = information; } + release_fileio( &async->io ); } - SERVER_END_REQ; - - if (status != STATUS_PENDING) release_fileio( &async->io ); + if (alerted) set_async_direct_result( &wait_handle, status, information ); if (wait_handle) status = wait_async( wait_handle, options & FILE_SYNCHRONOUS_IO_ALERT ); return status; } diff --git a/dlls/ntdll/unix/sync.c b/dlls/ntdll/unix/sync.c index 442243d8bcf..ee25dfd0099 100644 --- a/dlls/ntdll/unix/sync.c +++ b/dlls/ntdll/unix/sync.c @@ -2510,3 +2510,29 @@ NTSTATUS WINAPI NtWaitForAlertByThreadId( const void *address, const LARGE_INTEG } #endif + +/* Notify direct completion of async and close the wait handle if it is no longer needed. + * This function is a no-op (returns status as-is) if the supplied handle is NULL. + */ +void set_async_direct_result( HANDLE *optional_handle, NTSTATUS status, ULONG_PTR information ) +{ + NTSTATUS ret; + + if (!*optional_handle) return; + + SERVER_START_REQ( set_async_direct_result ) + { + req->handle = wine_server_obj_handle( *optional_handle ); + req->status = status; + req->information = information; + ret = wine_server_call( req ); + if (ret == STATUS_SUCCESS) + *optional_handle = wine_server_ptr_handle( reply->handle ); + } + SERVER_END_REQ; + + if (ret != STATUS_SUCCESS) + ERR( "cannot report I/O result back to server: %08x\n", ret ); + + return; +} diff --git a/dlls/ntdll/unix/unix_private.h b/dlls/ntdll/unix/unix_private.h index a79edabc37c..75f03706401 100644 --- a/dlls/ntdll/unix/unix_private.h +++ b/dlls/ntdll/unix/unix_private.h @@ -274,6 +274,7 @@ extern NTSTATUS get_device_info( int fd, struct _FILE_FS_DEVICE_INFORMATION *inf extern void init_files(void) DECLSPEC_HIDDEN; extern void init_cpu_info(void) DECLSPEC_HIDDEN; extern void add_completion( HANDLE handle, ULONG_PTR value, NTSTATUS status, ULONG info, BOOL async ) DECLSPEC_HIDDEN; +extern void set_async_direct_result( HANDLE *optional_handle, NTSTATUS status, ULONG_PTR information ); extern void dbg_init(void) DECLSPEC_HIDDEN; diff --git a/server/protocol.def b/server/protocol.def index 28dee7c48f7..ebd3612df06 100644 --- a/server/protocol.def +++ b/server/protocol.def @@ -1456,6 +1456,7 @@ enum server_fd_type @REPLY obj_handle_t wait; /* handle to wait on for blocking recv */ unsigned int options; /* device open options */ + int nonblocking; /* is socket non-blocking? */ @END diff --git a/server/sock.c b/server/sock.c index 512b7c0f78e..38aaaac9e39 100644 --- a/server/sock.c +++ b/server/sock.c @@ -3422,6 +3422,24 @@ DECL_HANDLER(recv_socket) if ((status == STATUS_PENDING || status == STATUS_DEVICE_NOT_READY) && sock->rd_shutdown) status = STATUS_PIPE_DISCONNECTED; + /* NOTE: If read_q is not empty, we cannot really tell if the already queued asyncs + * NOTE: will not consume all available data; if there's no data available, + * NOTE: the current request won't be immediately satiable. */ + if ((status == STATUS_PENDING || status == STATUS_DEVICE_NOT_READY) && !async_queued( &sock->read_q )) + { + struct pollfd pollfd; + pollfd.fd = get_unix_fd( sock->fd ); + pollfd.events = req->oob ? POLLPRI : POLLIN; + pollfd.revents = 0; + if (poll(&pollfd, 1, 0) >= 0 && pollfd.revents) + { + /* Give the client opportunity to complete synchronously. + * If it turns out that the I/O request is not actually immediately satiable, + * the client may then choose to re-queue the async (with STATUS_PENDING). */ + status = STATUS_ALERTED; + } + } + sock->pending_events &= ~(req->oob ? AFD_POLL_OOB : AFD_POLL_READ); sock->reported_events &= ~(req->oob ? AFD_POLL_OOB : AFD_POLL_READ); @@ -3438,7 +3456,7 @@ DECL_HANDLER(recv_socket) if (timeout) async_set_timeout( async, timeout, STATUS_IO_TIMEOUT ); - if (status == STATUS_PENDING) + if (status == STATUS_PENDING || status == STATUS_ALERTED) queue_async( &sock->read_q, async ); /* always reselect; we changed reported_events above */ @@ -3446,6 +3464,7 @@ DECL_HANDLER(recv_socket) reply->wait = async_handoff( async, NULL, 0 ); reply->options = get_fd_options( fd ); + reply->nonblocking = sock->nonblocking; release_object( async ); } release_object( sock ); -- 2.34.1
Signed-off-by: Zebediah Figura <zfigura(a)codeweavers.com>
Otherwise, try_recv() call from sock_recv() may race against try_recv() call from async_recv_proc(), shuffling the packet order. Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52401 Signed-off-by: Jinoh Kang <jinoh.kang.kr(a)gmail.com> --- Notes: v3 -> v4: unchanged v4 -> v5: unchanged v5 -> v6: unchanged dlls/ntdll/unix/socket.c | 12 ++---------- dlls/ws2_32/tests/sock.c | 8 ++++---- 2 files changed, 6 insertions(+), 14 deletions(-) diff --git a/dlls/ntdll/unix/socket.c b/dlls/ntdll/unix/socket.c index 03a9a93d04a..5e3c724f807 100644 --- a/dlls/ntdll/unix/socket.c +++ b/dlls/ntdll/unix/socket.c @@ -737,16 +737,8 @@ static NTSTATUS sock_recv( HANDLE handle, HANDLE event, PIO_APC_ROUTINE apc, voi } } - status = try_recv( fd, async, &information ); - - if (status != STATUS_SUCCESS && status != STATUS_BUFFER_OVERFLOW && status != STATUS_DEVICE_NOT_READY) - { - release_fileio( &async->io ); - return status; - } - - if (status == STATUS_DEVICE_NOT_READY && force_async) - status = STATUS_PENDING; + status = force_async ? STATUS_PENDING : STATUS_DEVICE_NOT_READY; + information = 0; SERVER_START_REQ( recv_socket ) { diff --git a/dlls/ws2_32/tests/sock.c b/dlls/ws2_32/tests/sock.c index d208c17e43f..6b6267dc153 100644 --- a/dlls/ws2_32/tests/sock.c +++ b/dlls/ws2_32/tests/sock.c @@ -7813,8 +7813,8 @@ static void test_shutdown(void) WSASetLastError(0xdeadbeef); ret = recv(server, buffer, sizeof(buffer), 0); - todo_wine ok(ret == -1, "got %d\n", ret); - todo_wine ok(WSAGetLastError() == WSAESHUTDOWN, "got error %u\n", WSAGetLastError()); + ok(ret == -1, "got %d\n", ret); + ok(WSAGetLastError() == WSAESHUTDOWN, "got error %u\n", WSAGetLastError()); ret = send(server, "test", 5, 0); ok(ret == 5, "got %d\n", ret); @@ -7908,8 +7908,8 @@ static void test_shutdown(void) WSASetLastError(0xdeadbeef); ret = recv(server, buffer, sizeof(buffer), 0); - todo_wine ok(ret == -1, "got %d\n", ret); - todo_wine ok(WSAGetLastError() == WSAESHUTDOWN, "got error %u\n", WSAGetLastError()); + ok(ret == -1, "got %d\n", ret); + ok(WSAGetLastError() == WSAESHUTDOWN, "got error %u\n", WSAGetLastError()); WSASetLastError(0xdeadbeef); ret = send(server, "test", 5, 0); -- 2.34.1
Hi, While running your changed tests, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at: https://testbot.winehq.org/JobDetails.pl?Key=107484 Your paranoid android. === debian11 (32 bit Hindi:India report) === ws2_32: sock.c:5330: Test failed: expected timeout
Signed-off-by: Zebediah Figura <zfigura(a)codeweavers.com>
This test has been succeeding ever since the try_recv() call has been removed before the server call in sock_recv(). Signed-off-by: Francois Gouget <fgouget(a)codeweavers.com> --- See commit 160eb74fdf2d707b381734c064a17ff6f0ba28b6. https://test.winehq.org/data/patterns.html#ws2_32:afd --- dlls/ws2_32/tests/afd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/dlls/ws2_32/tests/afd.c b/dlls/ws2_32/tests/afd.c index d8a78947de4..befd9fc702e 100644 --- a/dlls/ws2_32/tests/afd.c +++ b/dlls/ws2_32/tests/afd.c @@ -1460,7 +1460,7 @@ static void test_recv(void) memset(buffer, 0xcc, sizeof(buffer)); ret = NtDeviceIoControlFile((HANDLE)client, event, NULL, NULL, &io, IOCTL_AFD_RECV, ¶ms, sizeof(params), NULL, 0); - todo_wine ok(ret == STATUS_PIPE_DISCONNECTED, "got %#x\n", ret); + ok(ret == STATUS_PIPE_DISCONNECTED, "got %#x\n", ret); ok(!io.Status, "got status %#x\n", io.Status); ok(!io.Information, "got information %#Ix\n", io.Information); -- 2.30.2
Signed-off-by: Zebediah Figura <zfigura(a)codeweavers.com>
The 'status' field of recv_socket_request is always either STATUS_PENDING or STATUS_DEVICE_NOT_READY, and the 'total' field is always zero. Replace the 'status' field with 'force_async' boolean field, and get rid of the 'total' field entirely. Also, clean up the recv_socket handler code a bit. Signed-off-by: Jinoh Kang <jinoh.kang.kr(a)gmail.com> --- Notes: v3 -> v4: unchanged v4 -> v5: - rearrange conditional statements - remove pending flag - remove dead code "information = 0;" v5 -> v6: get rid of outdated comment on recv timeout dlls/ntdll/unix/socket.c | 6 +----- server/protocol.def | 3 +-- server/sock.c | 40 ++++++++++++---------------------------- 3 files changed, 14 insertions(+), 35 deletions(-) diff --git a/dlls/ntdll/unix/socket.c b/dlls/ntdll/unix/socket.c index 5e3c724f807..23059e3cff8 100644 --- a/dlls/ntdll/unix/socket.c +++ b/dlls/ntdll/unix/socket.c @@ -737,13 +737,9 @@ static NTSTATUS sock_recv( HANDLE handle, HANDLE event, PIO_APC_ROUTINE apc, voi } } - status = force_async ? STATUS_PENDING : STATUS_DEVICE_NOT_READY; - information = 0; - SERVER_START_REQ( recv_socket ) { - req->status = status; - req->total = information; + req->force_async = force_async; req->async = server_async( handle, &async->io, event, apc, apc_user, iosb_client_ptr(io) ); req->oob = !!(unix_flags & MSG_OOB); status = wine_server_call( req ); diff --git a/server/protocol.def b/server/protocol.def index ebd3612df06..2e00601e2a5 100644 --- a/server/protocol.def +++ b/server/protocol.def @@ -1451,8 +1451,7 @@ enum server_fd_type @REQ(recv_socket) int oob; /* are we receiving OOB data? */ async_data_t async; /* async I/O parameters */ - unsigned int status; /* status of initial call */ - unsigned int total; /* number of bytes already read */ + int force_async; /* Force asynchronous mode? */ @REPLY obj_handle_t wait; /* handle to wait on for blocking recv */ unsigned int options; /* device open options */ diff --git a/server/sock.c b/server/sock.c index 38aaaac9e39..91f98556552 100644 --- a/server/sock.c +++ b/server/sock.c @@ -3396,7 +3396,7 @@ struct object *create_socket_device( struct object *root, const struct unicode_s DECL_HANDLER(recv_socket) { struct sock *sock = (struct sock *)get_handle_obj( current->process, req->async.handle, 0, &sock_ops ); - unsigned int status = req->status; + unsigned int status = STATUS_PENDING; timeout_t timeout = 0; struct async *async; struct fd *fd; @@ -3404,29 +3404,16 @@ DECL_HANDLER(recv_socket) if (!sock) return; fd = sock->fd; - /* recv() returned EWOULDBLOCK, i.e. no data available yet */ - if (status == STATUS_DEVICE_NOT_READY && !sock->nonblocking) - { - /* Set a timeout on the async if necessary. - * - * We want to do this *only* if the client gave us STATUS_DEVICE_NOT_READY. - * If the client gave us STATUS_PENDING, it expects the async to always - * block (it was triggered by WSARecv*() with a valid OVERLAPPED - * structure) and for the timeout not to be respected. */ - if (is_fd_overlapped( fd )) - timeout = (timeout_t)sock->rcvtimeo * -10000; - - status = STATUS_PENDING; - } - - if ((status == STATUS_PENDING || status == STATUS_DEVICE_NOT_READY) && sock->rd_shutdown) - status = STATUS_PIPE_DISCONNECTED; + if (!req->force_async && !sock->nonblocking && is_fd_overlapped( fd )) + timeout = (timeout_t)sock->rcvtimeo * -10000; - /* NOTE: If read_q is not empty, we cannot really tell if the already queued asyncs - * NOTE: will not consume all available data; if there's no data available, - * NOTE: the current request won't be immediately satiable. */ - if ((status == STATUS_PENDING || status == STATUS_DEVICE_NOT_READY) && !async_queued( &sock->read_q )) + if (sock->rd_shutdown) status = STATUS_PIPE_DISCONNECTED; + else if (!async_queued( &sock->read_q )) { + /* If read_q is not empty, we cannot really tell if the already queued + * asyncs will not consume all available data; if there's no data + * available, the current request won't be immediately satiable. + */ struct pollfd pollfd; pollfd.fd = get_unix_fd( sock->fd ); pollfd.events = req->oob ? POLLPRI : POLLIN; @@ -3440,17 +3427,14 @@ DECL_HANDLER(recv_socket) } } + if (status == STATUS_PENDING && !req->force_async && sock->nonblocking) + status = STATUS_DEVICE_NOT_READY; + sock->pending_events &= ~(req->oob ? AFD_POLL_OOB : AFD_POLL_READ); sock->reported_events &= ~(req->oob ? AFD_POLL_OOB : AFD_POLL_READ); if ((async = create_request_async( fd, get_fd_comp_flags( fd ), &req->async ))) { - if (status == STATUS_SUCCESS) - { - struct iosb *iosb = async_get_iosb( async ); - iosb->result = req->total; - release_object( iosb ); - } set_error( status ); if (timeout) -- 2.34.1
Signed-off-by: Zebediah Figura <zfigura(a)codeweavers.com>
participants (4)
-
Francois Gouget -
Jinoh Kang -
Marvin -
Zebediah Figura