[PATCH v2] winealsa.drv: use separate port for each output device.
This fixes use of multiple MIDI outputs while keeping the flexibility of proper ALSA sequencer port subscriptions. Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52220 Signed-off-by: Jacek Konieczny <jajcus(a)jajcus.net> --- v2: do not fail on port connection errors. Fixes failures to open a device when the port is already connected to the target, either by wine or some external application --- dlls/winealsa.drv/midi.c | 55 +++++++++++++++++++++++++++------------- 1 file changed, 38 insertions(+), 17 deletions(-) diff --git a/dlls/winealsa.drv/midi.c b/dlls/winealsa.drv/midi.c index f2fe6307bb2..ac666b49d79 100644 --- a/dlls/winealsa.drv/midi.c +++ b/dlls/winealsa.drv/midi.c @@ -85,6 +85,7 @@ typedef struct { void* lpExtra; /* according to port type (MIDI, FM...), extra data when needed */ MIDIOUTCAPSW caps; snd_seq_addr_t addr; + int port_out; } WINE_MIDIOUT; static WINE_MIDIIN MidiInDev [MAX_MIDIINDRV ]; @@ -108,7 +109,6 @@ static int numOpenMidiSeq = 0; static int numStartedMidiIn = 0; static int port_in; -static int port_out; static CRITICAL_SECTION crit_sect; /* protects all MidiIn buffer queues */ static CRITICAL_SECTION_DEBUG critsect_debug = @@ -247,14 +247,6 @@ static int midiOpenSeq(BOOL create_client) /* Setting the client name is the only init to do */ snd_seq_set_client_name(midiSeq, "WINE midi driver"); - port_out = snd_seq_create_simple_port(midiSeq, "WINE ALSA Output", - SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, - SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); - if (port_out < 0) - TRACE("Unable to create output port\n"); - else - TRACE("Outport port %d created successfully\n", port_out); - port_in = snd_seq_create_simple_port(midiSeq, "WINE ALSA Input", SND_SEQ_PORT_CAP_WRITE|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); @@ -276,7 +268,6 @@ static int midiCloseSeq(void) { EnterCriticalSection(&midiSeqLock); if (--numOpenMidiSeq == 0) { - snd_seq_delete_simple_port(midiSeq, port_out); snd_seq_delete_simple_port(midiSeq, port_in); snd_seq_close(midiSeq); midiSeq = NULL; @@ -738,6 +729,8 @@ static DWORD modGetDevCaps(WORD wDevID, LPMIDIOUTCAPSW lpCaps, DWORD dwSize) static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) { int ret; + int port_out; + char port_out_name[32]; TRACE("(%04X, %p, %08X);\n", wDevID, lpDesc, dwFlags); if (lpDesc == NULL) { @@ -784,12 +777,37 @@ static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) MidiOutDev[wDevID].bufsize = 0x3FFF; MidiOutDev[wDevID].midiDesc = *lpDesc; - /* Connect our app port to the device port */ EnterCriticalSection(&midiSeqLock); - ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, - MidiOutDev[wDevID].addr.port); + /* Create a port dedicated to a specific device */ + /* Keep the old name without a number for the first port */ + if (wDevID) + sprintf(port_out_name, "WINE ALSA Output #%d", wDevID); + + port_out = snd_seq_create_simple_port(midiSeq, wDevID?port_out_name:"WINE ALSA Output", + SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, + SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); + + if (port_out < 0) { + TRACE("Unable to create output port\n"); + MidiOutDev[wDevID].port_out = -1; + } else { + TRACE("Outport port %d created successfully\n", port_out); + MidiOutDev[wDevID].port_out = port_out; + + /* Connect our app port to the device port */ + ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port); + + /* usually will happen when the port is already connected */ + /* other errors should not be fatal either */ + if (ret < 0) + WARN("Could not connect port %d to %d:%d: %s\n", + wDevID, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port, snd_strerror(ret)); + } LeaveCriticalSection(&midiSeqLock); - if (ret < 0) + + if (port_out < 0) return MMSYSERR_NOTENABLED; TRACE("Output port :%d connected %d:%d\n",port_out,MidiOutDev[wDevID].addr.client,MidiOutDev[wDevID].addr.port); @@ -825,7 +843,9 @@ static DWORD modClose(WORD wDevID) case MOD_MIDIPORT: case MOD_SYNTH: EnterCriticalSection(&midiSeqLock); - snd_seq_disconnect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + TRACE("Deleting port :%d, connected to %d:%d\n", MidiOutDev[wDevID].port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + snd_seq_delete_simple_port(midiSeq, MidiOutDev[wDevID].port_out); + MidiOutDev[wDevID].port_out = -1; LeaveCriticalSection(&midiSeqLock); midiCloseSeq(); break; @@ -870,7 +890,7 @@ static DWORD modData(WORD wDevID, DWORD dwParam) snd_seq_event_t event; snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event); switch (evt & 0xF0) { @@ -1039,7 +1059,7 @@ static DWORD modLongData(WORD wDevID, LPMIDIHDR lpMidiHdr, DWORD dwSize) } snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event); snd_seq_ev_set_sysex(&event, lpMidiHdr->dwBufferLength + len_add, lpNewData ? lpNewData : lpData); EnterCriticalSection(&midiSeqLock); @@ -1201,6 +1221,7 @@ static void ALSA_AddMidiPort(snd_seq_client_info_t* cinfo, snd_seq_port_info_t* MidiOutDev[MODM_NumDevs].caps.wNotes = 16; } MidiOutDev[MODM_NumDevs].bEnabled = TRUE; + MidiOutDev[MODM_NumDevs].port_out = -1; TRACE("MidiOut[%d]\tname='%s' techn=%d voices=%d notes=%d chnMsk=%04x support=%d\n" "\tALSA info: midi dev-type=%x, capa=0\n", -- 2.25.1
Kakurasan, can you try out Jacek's patch? https://source.winehq.org/patches/data/222355 Thanks, Andrew On Sun, Dec 19, 2021 at 03:20:28PM +0100, Jacek Konieczny wrote:
This fixes use of multiple MIDI outputs while keeping the flexibility of proper ALSA sequencer port subscriptions.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52220 Signed-off-by: Jacek Konieczny <jajcus(a)jajcus.net> --- v2: do not fail on port connection errors. Fixes failures to open a device when the port is already connected to the target, either by wine or some external application --- dlls/winealsa.drv/midi.c | 55 +++++++++++++++++++++++++++------------- 1 file changed, 38 insertions(+), 17 deletions(-)
diff --git a/dlls/winealsa.drv/midi.c b/dlls/winealsa.drv/midi.c index f2fe6307bb2..ac666b49d79 100644 --- a/dlls/winealsa.drv/midi.c +++ b/dlls/winealsa.drv/midi.c @@ -85,6 +85,7 @@ typedef struct { void* lpExtra; /* according to port type (MIDI, FM...), extra data when needed */ MIDIOUTCAPSW caps; snd_seq_addr_t addr; + int port_out; } WINE_MIDIOUT;
static WINE_MIDIIN MidiInDev [MAX_MIDIINDRV ]; @@ -108,7 +109,6 @@ static int numOpenMidiSeq = 0; static int numStartedMidiIn = 0;
static int port_in; -static int port_out;
static CRITICAL_SECTION crit_sect; /* protects all MidiIn buffer queues */ static CRITICAL_SECTION_DEBUG critsect_debug = @@ -247,14 +247,6 @@ static int midiOpenSeq(BOOL create_client) /* Setting the client name is the only init to do */ snd_seq_set_client_name(midiSeq, "WINE midi driver");
- port_out = snd_seq_create_simple_port(midiSeq, "WINE ALSA Output", - SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, - SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); - if (port_out < 0) - TRACE("Unable to create output port\n"); - else - TRACE("Outport port %d created successfully\n", port_out); - port_in = snd_seq_create_simple_port(midiSeq, "WINE ALSA Input", SND_SEQ_PORT_CAP_WRITE|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); @@ -276,7 +268,6 @@ static int midiCloseSeq(void) { EnterCriticalSection(&midiSeqLock); if (--numOpenMidiSeq == 0) { - snd_seq_delete_simple_port(midiSeq, port_out); snd_seq_delete_simple_port(midiSeq, port_in); snd_seq_close(midiSeq); midiSeq = NULL; @@ -738,6 +729,8 @@ static DWORD modGetDevCaps(WORD wDevID, LPMIDIOUTCAPSW lpCaps, DWORD dwSize) static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) { int ret; + int port_out; + char port_out_name[32];
TRACE("(%04X, %p, %08X);\n", wDevID, lpDesc, dwFlags); if (lpDesc == NULL) { @@ -784,12 +777,37 @@ static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) MidiOutDev[wDevID].bufsize = 0x3FFF; MidiOutDev[wDevID].midiDesc = *lpDesc;
- /* Connect our app port to the device port */ EnterCriticalSection(&midiSeqLock); - ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, - MidiOutDev[wDevID].addr.port); + /* Create a port dedicated to a specific device */ + /* Keep the old name without a number for the first port */ + if (wDevID) + sprintf(port_out_name, "WINE ALSA Output #%d", wDevID); + + port_out = snd_seq_create_simple_port(midiSeq, wDevID?port_out_name:"WINE ALSA Output", + SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, + SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); + + if (port_out < 0) { + TRACE("Unable to create output port\n"); + MidiOutDev[wDevID].port_out = -1; + } else { + TRACE("Outport port %d created successfully\n", port_out); + MidiOutDev[wDevID].port_out = port_out; + + /* Connect our app port to the device port */ + ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port); + + /* usually will happen when the port is already connected */ + /* other errors should not be fatal either */ + if (ret < 0) + WARN("Could not connect port %d to %d:%d: %s\n", + wDevID, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port, snd_strerror(ret)); + } LeaveCriticalSection(&midiSeqLock); - if (ret < 0) + + if (port_out < 0) return MMSYSERR_NOTENABLED;
TRACE("Output port :%d connected %d:%d\n",port_out,MidiOutDev[wDevID].addr.client,MidiOutDev[wDevID].addr.port); @@ -825,7 +843,9 @@ static DWORD modClose(WORD wDevID) case MOD_MIDIPORT: case MOD_SYNTH: EnterCriticalSection(&midiSeqLock); - snd_seq_disconnect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + TRACE("Deleting port :%d, connected to %d:%d\n", MidiOutDev[wDevID].port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + snd_seq_delete_simple_port(midiSeq, MidiOutDev[wDevID].port_out); + MidiOutDev[wDevID].port_out = -1; LeaveCriticalSection(&midiSeqLock); midiCloseSeq(); break; @@ -870,7 +890,7 @@ static DWORD modData(WORD wDevID, DWORD dwParam) snd_seq_event_t event; snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event);
switch (evt & 0xF0) { @@ -1039,7 +1059,7 @@ static DWORD modLongData(WORD wDevID, LPMIDIHDR lpMidiHdr, DWORD dwSize) } snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event); snd_seq_ev_set_sysex(&event, lpMidiHdr->dwBufferLength + len_add, lpNewData ? lpNewData : lpData); EnterCriticalSection(&midiSeqLock); @@ -1201,6 +1221,7 @@ static void ALSA_AddMidiPort(snd_seq_client_info_t* cinfo, snd_seq_port_info_t* MidiOutDev[MODM_NumDevs].caps.wNotes = 16; } MidiOutDev[MODM_NumDevs].bEnabled = TRUE; + MidiOutDev[MODM_NumDevs].port_out = -1;
TRACE("MidiOut[%d]\tname='%s' techn=%d voices=%d notes=%d chnMsk=%04x support=%d\n" "\tALSA info: midi dev-type=%x, capa=0\n", -- 2.25.1
Whoops, I missed the ongoing discussion on the bug :) I will wait to hear back if this revised version is working for you. Andrew On Mon, Dec 20, 2021 at 08:41:38AM -0600, Andrew Eikum wrote:
Kakurasan, can you try out Jacek's patch?
https://source.winehq.org/patches/data/222355
Thanks, Andrew
On Sun, Dec 19, 2021 at 03:20:28PM +0100, Jacek Konieczny wrote:
This fixes use of multiple MIDI outputs while keeping the flexibility of proper ALSA sequencer port subscriptions.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52220 Signed-off-by: Jacek Konieczny <jajcus(a)jajcus.net> --- v2: do not fail on port connection errors. Fixes failures to open a device when the port is already connected to the target, either by wine or some external application --- dlls/winealsa.drv/midi.c | 55 +++++++++++++++++++++++++++------------- 1 file changed, 38 insertions(+), 17 deletions(-)
diff --git a/dlls/winealsa.drv/midi.c b/dlls/winealsa.drv/midi.c index f2fe6307bb2..ac666b49d79 100644 --- a/dlls/winealsa.drv/midi.c +++ b/dlls/winealsa.drv/midi.c @@ -85,6 +85,7 @@ typedef struct { void* lpExtra; /* according to port type (MIDI, FM...), extra data when needed */ MIDIOUTCAPSW caps; snd_seq_addr_t addr; + int port_out; } WINE_MIDIOUT;
static WINE_MIDIIN MidiInDev [MAX_MIDIINDRV ]; @@ -108,7 +109,6 @@ static int numOpenMidiSeq = 0; static int numStartedMidiIn = 0;
static int port_in; -static int port_out;
static CRITICAL_SECTION crit_sect; /* protects all MidiIn buffer queues */ static CRITICAL_SECTION_DEBUG critsect_debug = @@ -247,14 +247,6 @@ static int midiOpenSeq(BOOL create_client) /* Setting the client name is the only init to do */ snd_seq_set_client_name(midiSeq, "WINE midi driver");
- port_out = snd_seq_create_simple_port(midiSeq, "WINE ALSA Output", - SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, - SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); - if (port_out < 0) - TRACE("Unable to create output port\n"); - else - TRACE("Outport port %d created successfully\n", port_out); - port_in = snd_seq_create_simple_port(midiSeq, "WINE ALSA Input", SND_SEQ_PORT_CAP_WRITE|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); @@ -276,7 +268,6 @@ static int midiCloseSeq(void) { EnterCriticalSection(&midiSeqLock); if (--numOpenMidiSeq == 0) { - snd_seq_delete_simple_port(midiSeq, port_out); snd_seq_delete_simple_port(midiSeq, port_in); snd_seq_close(midiSeq); midiSeq = NULL; @@ -738,6 +729,8 @@ static DWORD modGetDevCaps(WORD wDevID, LPMIDIOUTCAPSW lpCaps, DWORD dwSize) static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) { int ret; + int port_out; + char port_out_name[32];
TRACE("(%04X, %p, %08X);\n", wDevID, lpDesc, dwFlags); if (lpDesc == NULL) { @@ -784,12 +777,37 @@ static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) MidiOutDev[wDevID].bufsize = 0x3FFF; MidiOutDev[wDevID].midiDesc = *lpDesc;
- /* Connect our app port to the device port */ EnterCriticalSection(&midiSeqLock); - ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, - MidiOutDev[wDevID].addr.port); + /* Create a port dedicated to a specific device */ + /* Keep the old name without a number for the first port */ + if (wDevID) + sprintf(port_out_name, "WINE ALSA Output #%d", wDevID); + + port_out = snd_seq_create_simple_port(midiSeq, wDevID?port_out_name:"WINE ALSA Output", + SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, + SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); + + if (port_out < 0) { + TRACE("Unable to create output port\n"); + MidiOutDev[wDevID].port_out = -1; + } else { + TRACE("Outport port %d created successfully\n", port_out); + MidiOutDev[wDevID].port_out = port_out; + + /* Connect our app port to the device port */ + ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port); + + /* usually will happen when the port is already connected */ + /* other errors should not be fatal either */ + if (ret < 0) + WARN("Could not connect port %d to %d:%d: %s\n", + wDevID, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port, snd_strerror(ret)); + } LeaveCriticalSection(&midiSeqLock); - if (ret < 0) + + if (port_out < 0) return MMSYSERR_NOTENABLED;
TRACE("Output port :%d connected %d:%d\n",port_out,MidiOutDev[wDevID].addr.client,MidiOutDev[wDevID].addr.port); @@ -825,7 +843,9 @@ static DWORD modClose(WORD wDevID) case MOD_MIDIPORT: case MOD_SYNTH: EnterCriticalSection(&midiSeqLock); - snd_seq_disconnect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + TRACE("Deleting port :%d, connected to %d:%d\n", MidiOutDev[wDevID].port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + snd_seq_delete_simple_port(midiSeq, MidiOutDev[wDevID].port_out); + MidiOutDev[wDevID].port_out = -1; LeaveCriticalSection(&midiSeqLock); midiCloseSeq(); break; @@ -870,7 +890,7 @@ static DWORD modData(WORD wDevID, DWORD dwParam) snd_seq_event_t event; snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event);
switch (evt & 0xF0) { @@ -1039,7 +1059,7 @@ static DWORD modLongData(WORD wDevID, LPMIDIHDR lpMidiHdr, DWORD dwSize) } snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event); snd_seq_ev_set_sysex(&event, lpMidiHdr->dwBufferLength + len_add, lpNewData ? lpNewData : lpData); EnterCriticalSection(&midiSeqLock); @@ -1201,6 +1221,7 @@ static void ALSA_AddMidiPort(snd_seq_client_info_t* cinfo, snd_seq_port_info_t* MidiOutDev[MODM_NumDevs].caps.wNotes = 16; } MidiOutDev[MODM_NumDevs].bEnabled = TRUE; + MidiOutDev[MODM_NumDevs].port_out = -1;
TRACE("MidiOut[%d]\tname='%s' techn=%d voices=%d notes=%d chnMsk=%04x support=%d\n" "\tALSA info: midi dev-type=%x, capa=0\n", -- 2.25.1
Hello Andrew. Now the v2 patch looks good to me (and works). May I have your opinion? Masanori On 2021/12/20 23:42, Andrew Eikum wrote:
Whoops, I missed the ongoing discussion on the bug :) I will wait to hear back if this revised version is working for you.
Andrew
On Mon, Dec 20, 2021 at 08:41:38AM -0600, Andrew Eikum wrote:
Kakurasan, can you try out Jacek's patch?
https://source.winehq.org/patches/data/222355
Thanks, Andrew
On Sun, Dec 19, 2021 at 03:20:28PM +0100, Jacek Konieczny wrote:
This fixes use of multiple MIDI outputs while keeping the flexibility of proper ALSA sequencer port subscriptions.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52220 Signed-off-by: Jacek Konieczny <jajcus(a)jajcus.net> --- v2: do not fail on port connection errors. Fixes failures to open a device when the port is already connected to the target, either by wine or some external application --- dlls/winealsa.drv/midi.c | 55 +++++++++++++++++++++++++++------------- 1 file changed, 38 insertions(+), 17 deletions(-)
diff --git a/dlls/winealsa.drv/midi.c b/dlls/winealsa.drv/midi.c index f2fe6307bb2..ac666b49d79 100644 --- a/dlls/winealsa.drv/midi.c +++ b/dlls/winealsa.drv/midi.c @@ -85,6 +85,7 @@ typedef struct { void* lpExtra; /* according to port type (MIDI, FM...), extra data when needed */ MIDIOUTCAPSW caps; snd_seq_addr_t addr; + int port_out; } WINE_MIDIOUT;
static WINE_MIDIIN MidiInDev [MAX_MIDIINDRV ]; @@ -108,7 +109,6 @@ static int numOpenMidiSeq = 0; static int numStartedMidiIn = 0;
static int port_in; -static int port_out;
static CRITICAL_SECTION crit_sect; /* protects all MidiIn buffer queues */ static CRITICAL_SECTION_DEBUG critsect_debug = @@ -247,14 +247,6 @@ static int midiOpenSeq(BOOL create_client) /* Setting the client name is the only init to do */ snd_seq_set_client_name(midiSeq, "WINE midi driver");
- port_out = snd_seq_create_simple_port(midiSeq, "WINE ALSA Output", - SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, - SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); - if (port_out < 0) - TRACE("Unable to create output port\n"); - else - TRACE("Outport port %d created successfully\n", port_out); - port_in = snd_seq_create_simple_port(midiSeq, "WINE ALSA Input", SND_SEQ_PORT_CAP_WRITE|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); @@ -276,7 +268,6 @@ static int midiCloseSeq(void) { EnterCriticalSection(&midiSeqLock); if (--numOpenMidiSeq == 0) { - snd_seq_delete_simple_port(midiSeq, port_out); snd_seq_delete_simple_port(midiSeq, port_in); snd_seq_close(midiSeq); midiSeq = NULL; @@ -738,6 +729,8 @@ static DWORD modGetDevCaps(WORD wDevID, LPMIDIOUTCAPSW lpCaps, DWORD dwSize) static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) { int ret; + int port_out; + char port_out_name[32];
TRACE("(%04X, %p, %08X);\n", wDevID, lpDesc, dwFlags); if (lpDesc == NULL) { @@ -784,12 +777,37 @@ static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) MidiOutDev[wDevID].bufsize = 0x3FFF; MidiOutDev[wDevID].midiDesc = *lpDesc;
- /* Connect our app port to the device port */ EnterCriticalSection(&midiSeqLock); - ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, - MidiOutDev[wDevID].addr.port); + /* Create a port dedicated to a specific device */ + /* Keep the old name without a number for the first port */ + if (wDevID) + sprintf(port_out_name, "WINE ALSA Output #%d", wDevID); + + port_out = snd_seq_create_simple_port(midiSeq, wDevID?port_out_name:"WINE ALSA Output", + SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, + SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); + + if (port_out < 0) { + TRACE("Unable to create output port\n"); + MidiOutDev[wDevID].port_out = -1; + } else { + TRACE("Outport port %d created successfully\n", port_out); + MidiOutDev[wDevID].port_out = port_out; + + /* Connect our app port to the device port */ + ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port); + + /* usually will happen when the port is already connected */ + /* other errors should not be fatal either */ + if (ret < 0) + WARN("Could not connect port %d to %d:%d: %s\n", + wDevID, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port, snd_strerror(ret)); + } LeaveCriticalSection(&midiSeqLock); - if (ret < 0) + + if (port_out < 0) return MMSYSERR_NOTENABLED;
TRACE("Output port :%d connected %d:%d\n",port_out,MidiOutDev[wDevID].addr.client,MidiOutDev[wDevID].addr.port); @@ -825,7 +843,9 @@ static DWORD modClose(WORD wDevID) case MOD_MIDIPORT: case MOD_SYNTH: EnterCriticalSection(&midiSeqLock); - snd_seq_disconnect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + TRACE("Deleting port :%d, connected to %d:%d\n", MidiOutDev[wDevID].port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + snd_seq_delete_simple_port(midiSeq, MidiOutDev[wDevID].port_out); + MidiOutDev[wDevID].port_out = -1; LeaveCriticalSection(&midiSeqLock); midiCloseSeq(); break; @@ -870,7 +890,7 @@ static DWORD modData(WORD wDevID, DWORD dwParam) snd_seq_event_t event; snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event);
switch (evt & 0xF0) { @@ -1039,7 +1059,7 @@ static DWORD modLongData(WORD wDevID, LPMIDIHDR lpMidiHdr, DWORD dwSize) } snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event); snd_seq_ev_set_sysex(&event, lpMidiHdr->dwBufferLength + len_add, lpNewData ? lpNewData : lpData); EnterCriticalSection(&midiSeqLock); @@ -1201,6 +1221,7 @@ static void ALSA_AddMidiPort(snd_seq_client_info_t* cinfo, snd_seq_port_info_t* MidiOutDev[MODM_NumDevs].caps.wNotes = 16; } MidiOutDev[MODM_NumDevs].bEnabled = TRUE; + MidiOutDev[MODM_NumDevs].port_out = -1;
TRACE("MidiOut[%d]\tname='%s' techn=%d voices=%d notes=%d chnMsk=%04x support=%d\n" "\tALSA info: midi dev-type=%x, capa=0\n", -- 2.25.1
On Thu, Dec 23, 2021 at 10:20:59PM +0900, Masanori Kakura wrote:
Now the v2 patch looks good to me (and works). May I have your opinion?
Great, I've signed-off on the patch. Thanks to both of you for your work on this! Andrew
On 2021/12/20 23:42, Andrew Eikum wrote:
Whoops, I missed the ongoing discussion on the bug :) I will wait to hear back if this revised version is working for you.
Andrew
On Mon, Dec 20, 2021 at 08:41:38AM -0600, Andrew Eikum wrote:
Kakurasan, can you try out Jacek's patch?
https://source.winehq.org/patches/data/222355
Thanks, Andrew
On Sun, Dec 19, 2021 at 03:20:28PM +0100, Jacek Konieczny wrote:
This fixes use of multiple MIDI outputs while keeping the flexibility of proper ALSA sequencer port subscriptions.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52220 Signed-off-by: Jacek Konieczny <jajcus(a)jajcus.net> --- v2: do not fail on port connection errors. Fixes failures to open a device when the port is already connected to the target, either by wine or some external application --- dlls/winealsa.drv/midi.c | 55 +++++++++++++++++++++++++++------------- 1 file changed, 38 insertions(+), 17 deletions(-)
diff --git a/dlls/winealsa.drv/midi.c b/dlls/winealsa.drv/midi.c index f2fe6307bb2..ac666b49d79 100644 --- a/dlls/winealsa.drv/midi.c +++ b/dlls/winealsa.drv/midi.c @@ -85,6 +85,7 @@ typedef struct { void* lpExtra; /* according to port type (MIDI, FM...), extra data when needed */ MIDIOUTCAPSW caps; snd_seq_addr_t addr; + int port_out; } WINE_MIDIOUT; static WINE_MIDIIN MidiInDev [MAX_MIDIINDRV ]; @@ -108,7 +109,6 @@ static int numOpenMidiSeq = 0; static int numStartedMidiIn = 0; static int port_in; -static int port_out; static CRITICAL_SECTION crit_sect; /* protects all MidiIn buffer queues */ static CRITICAL_SECTION_DEBUG critsect_debug = @@ -247,14 +247,6 @@ static int midiOpenSeq(BOOL create_client) /* Setting the client name is the only init to do */ snd_seq_set_client_name(midiSeq, "WINE midi driver"); - port_out = snd_seq_create_simple_port(midiSeq, "WINE ALSA Output", - SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, - SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); - if (port_out < 0) - TRACE("Unable to create output port\n"); - else - TRACE("Outport port %d created successfully\n", port_out); - port_in = snd_seq_create_simple_port(midiSeq, "WINE ALSA Input", SND_SEQ_PORT_CAP_WRITE|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); @@ -276,7 +268,6 @@ static int midiCloseSeq(void) { EnterCriticalSection(&midiSeqLock); if (--numOpenMidiSeq == 0) { - snd_seq_delete_simple_port(midiSeq, port_out); snd_seq_delete_simple_port(midiSeq, port_in); snd_seq_close(midiSeq); midiSeq = NULL; @@ -738,6 +729,8 @@ static DWORD modGetDevCaps(WORD wDevID, LPMIDIOUTCAPSW lpCaps, DWORD dwSize) static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) { int ret; + int port_out; + char port_out_name[32]; TRACE("(%04X, %p, %08X);\n", wDevID, lpDesc, dwFlags); if (lpDesc == NULL) { @@ -784,12 +777,37 @@ static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) MidiOutDev[wDevID].bufsize = 0x3FFF; MidiOutDev[wDevID].midiDesc = *lpDesc; - /* Connect our app port to the device port */ EnterCriticalSection(&midiSeqLock); - ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, - MidiOutDev[wDevID].addr.port); + /* Create a port dedicated to a specific device */ + /* Keep the old name without a number for the first port */ + if (wDevID) + sprintf(port_out_name, "WINE ALSA Output #%d", wDevID); + + port_out = snd_seq_create_simple_port(midiSeq, wDevID?port_out_name:"WINE ALSA Output", + SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, + SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); + + if (port_out < 0) { + TRACE("Unable to create output port\n"); + MidiOutDev[wDevID].port_out = -1; + } else { + TRACE("Outport port %d created successfully\n", port_out); + MidiOutDev[wDevID].port_out = port_out; + + /* Connect our app port to the device port */ + ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port); + + /* usually will happen when the port is already connected */ + /* other errors should not be fatal either */ + if (ret < 0) + WARN("Could not connect port %d to %d:%d: %s\n", + wDevID, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port, snd_strerror(ret)); + } LeaveCriticalSection(&midiSeqLock); - if (ret < 0) + + if (port_out < 0) return MMSYSERR_NOTENABLED; TRACE("Output port :%d connected %d:%d\n",port_out,MidiOutDev[wDevID].addr.client,MidiOutDev[wDevID].addr.port); @@ -825,7 +843,9 @@ static DWORD modClose(WORD wDevID) case MOD_MIDIPORT: case MOD_SYNTH: EnterCriticalSection(&midiSeqLock); - snd_seq_disconnect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + TRACE("Deleting port :%d, connected to %d:%d\n", MidiOutDev[wDevID].port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + snd_seq_delete_simple_port(midiSeq, MidiOutDev[wDevID].port_out); + MidiOutDev[wDevID].port_out = -1; LeaveCriticalSection(&midiSeqLock); midiCloseSeq(); break; @@ -870,7 +890,7 @@ static DWORD modData(WORD wDevID, DWORD dwParam) snd_seq_event_t event; snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event);
switch (evt & 0xF0) { @@ -1039,7 +1059,7 @@ static DWORD modLongData(WORD wDevID, LPMIDIHDR lpMidiHdr, DWORD dwSize) } snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event); snd_seq_ev_set_sysex(&event, lpMidiHdr->dwBufferLength + len_add, lpNewData ? lpNewData : lpData); EnterCriticalSection(&midiSeqLock); @@ -1201,6 +1221,7 @@ static void ALSA_AddMidiPort(snd_seq_client_info_t* cinfo, snd_seq_port_info_t* MidiOutDev[MODM_NumDevs].caps.wNotes = 16; } MidiOutDev[MODM_NumDevs].bEnabled = TRUE; + MidiOutDev[MODM_NumDevs].port_out = -1; TRACE("MidiOut[%d]\tname='%s' techn=%d voices=%d notes=%d chnMsk=%04x support=%d\n" "\tALSA info: midi dev-type=%x, capa=0\n", -- 2.25.1
Signed-off-by: Andrew Eikum <aeikum(a)codeweavers.com> On Sun, Dec 19, 2021 at 03:20:28PM +0100, Jacek Konieczny wrote:
This fixes use of multiple MIDI outputs while keeping the flexibility of proper ALSA sequencer port subscriptions.
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=52220 Signed-off-by: Jacek Konieczny <jajcus(a)jajcus.net> --- v2: do not fail on port connection errors. Fixes failures to open a device when the port is already connected to the target, either by wine or some external application --- dlls/winealsa.drv/midi.c | 55 +++++++++++++++++++++++++++------------- 1 file changed, 38 insertions(+), 17 deletions(-)
diff --git a/dlls/winealsa.drv/midi.c b/dlls/winealsa.drv/midi.c index f2fe6307bb2..ac666b49d79 100644 --- a/dlls/winealsa.drv/midi.c +++ b/dlls/winealsa.drv/midi.c @@ -85,6 +85,7 @@ typedef struct { void* lpExtra; /* according to port type (MIDI, FM...), extra data when needed */ MIDIOUTCAPSW caps; snd_seq_addr_t addr; + int port_out; } WINE_MIDIOUT;
static WINE_MIDIIN MidiInDev [MAX_MIDIINDRV ]; @@ -108,7 +109,6 @@ static int numOpenMidiSeq = 0; static int numStartedMidiIn = 0;
static int port_in; -static int port_out;
static CRITICAL_SECTION crit_sect; /* protects all MidiIn buffer queues */ static CRITICAL_SECTION_DEBUG critsect_debug = @@ -247,14 +247,6 @@ static int midiOpenSeq(BOOL create_client) /* Setting the client name is the only init to do */ snd_seq_set_client_name(midiSeq, "WINE midi driver");
- port_out = snd_seq_create_simple_port(midiSeq, "WINE ALSA Output", - SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, - SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); - if (port_out < 0) - TRACE("Unable to create output port\n"); - else - TRACE("Outport port %d created successfully\n", port_out); - port_in = snd_seq_create_simple_port(midiSeq, "WINE ALSA Input", SND_SEQ_PORT_CAP_WRITE|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); @@ -276,7 +268,6 @@ static int midiCloseSeq(void) { EnterCriticalSection(&midiSeqLock); if (--numOpenMidiSeq == 0) { - snd_seq_delete_simple_port(midiSeq, port_out); snd_seq_delete_simple_port(midiSeq, port_in); snd_seq_close(midiSeq); midiSeq = NULL; @@ -738,6 +729,8 @@ static DWORD modGetDevCaps(WORD wDevID, LPMIDIOUTCAPSW lpCaps, DWORD dwSize) static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) { int ret; + int port_out; + char port_out_name[32];
TRACE("(%04X, %p, %08X);\n", wDevID, lpDesc, dwFlags); if (lpDesc == NULL) { @@ -784,12 +777,37 @@ static DWORD modOpen(WORD wDevID, LPMIDIOPENDESC lpDesc, DWORD dwFlags) MidiOutDev[wDevID].bufsize = 0x3FFF; MidiOutDev[wDevID].midiDesc = *lpDesc;
- /* Connect our app port to the device port */ EnterCriticalSection(&midiSeqLock); - ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, - MidiOutDev[wDevID].addr.port); + /* Create a port dedicated to a specific device */ + /* Keep the old name without a number for the first port */ + if (wDevID) + sprintf(port_out_name, "WINE ALSA Output #%d", wDevID); + + port_out = snd_seq_create_simple_port(midiSeq, wDevID?port_out_name:"WINE ALSA Output", + SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ|SND_SEQ_PORT_CAP_SUBS_WRITE, + SND_SEQ_PORT_TYPE_MIDI_GENERIC|SND_SEQ_PORT_TYPE_APPLICATION); + + if (port_out < 0) { + TRACE("Unable to create output port\n"); + MidiOutDev[wDevID].port_out = -1; + } else { + TRACE("Outport port %d created successfully\n", port_out); + MidiOutDev[wDevID].port_out = port_out; + + /* Connect our app port to the device port */ + ret = snd_seq_connect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port); + + /* usually will happen when the port is already connected */ + /* other errors should not be fatal either */ + if (ret < 0) + WARN("Could not connect port %d to %d:%d: %s\n", + wDevID, MidiOutDev[wDevID].addr.client, + MidiOutDev[wDevID].addr.port, snd_strerror(ret)); + } LeaveCriticalSection(&midiSeqLock); - if (ret < 0) + + if (port_out < 0) return MMSYSERR_NOTENABLED;
TRACE("Output port :%d connected %d:%d\n",port_out,MidiOutDev[wDevID].addr.client,MidiOutDev[wDevID].addr.port); @@ -825,7 +843,9 @@ static DWORD modClose(WORD wDevID) case MOD_MIDIPORT: case MOD_SYNTH: EnterCriticalSection(&midiSeqLock); - snd_seq_disconnect_to(midiSeq, port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + TRACE("Deleting port :%d, connected to %d:%d\n", MidiOutDev[wDevID].port_out, MidiOutDev[wDevID].addr.client, MidiOutDev[wDevID].addr.port); + snd_seq_delete_simple_port(midiSeq, MidiOutDev[wDevID].port_out); + MidiOutDev[wDevID].port_out = -1; LeaveCriticalSection(&midiSeqLock); midiCloseSeq(); break; @@ -870,7 +890,7 @@ static DWORD modData(WORD wDevID, DWORD dwParam) snd_seq_event_t event; snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event);
switch (evt & 0xF0) { @@ -1039,7 +1059,7 @@ static DWORD modLongData(WORD wDevID, LPMIDIHDR lpMidiHdr, DWORD dwSize) } snd_seq_ev_clear(&event); snd_seq_ev_set_direct(&event); - snd_seq_ev_set_source(&event, port_out); + snd_seq_ev_set_source(&event, MidiOutDev[wDevID].port_out); snd_seq_ev_set_subs(&event); snd_seq_ev_set_sysex(&event, lpMidiHdr->dwBufferLength + len_add, lpNewData ? lpNewData : lpData); EnterCriticalSection(&midiSeqLock); @@ -1201,6 +1221,7 @@ static void ALSA_AddMidiPort(snd_seq_client_info_t* cinfo, snd_seq_port_info_t* MidiOutDev[MODM_NumDevs].caps.wNotes = 16; } MidiOutDev[MODM_NumDevs].bEnabled = TRUE; + MidiOutDev[MODM_NumDevs].port_out = -1;
TRACE("MidiOut[%d]\tname='%s' techn=%d voices=%d notes=%d chnMsk=%04x support=%d\n" "\tALSA info: midi dev-type=%x, capa=0\n", -- 2.25.1
participants (3)
-
Andrew Eikum -
Jacek Konieczny -
Masanori Kakura