[PATCH] winealsa.drv: Adjust the buffer volume before sending it to ALSA
Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=38182 Signed-off-by: Gabriel Ivăncescu <gabrielopcode(a)gmail.com> --- It's a bit uglier than Pulse's code. First, the session channels allocation can actually fail without any error in the rest of the code, so the session->channel_count can be <= the fmt->nChannels, and thus we have to handle this case. Also, we have to keep track of the amount of samples we adjusted since ALSA can return -EAGAIN. I've artifically tested this by simulating every 10th buffer write call as if it was full (returning 0), and it worked fine. (it had some random rare glitches, but those were present even without this patch but with this simulation) dlls/winealsa.drv/mmdevdrv.c | 136 +++++++++++++++++++++++++++++++++-- 1 file changed, 129 insertions(+), 7 deletions(-) diff --git a/dlls/winealsa.drv/mmdevdrv.c b/dlls/winealsa.drv/mmdevdrv.c index 2bf4d73..8b96acd 100644 --- a/dlls/winealsa.drv/mmdevdrv.c +++ b/dlls/winealsa.drv/mmdevdrv.c @@ -126,6 +126,7 @@ struct ACImpl { UINT32 lcl_offs_frames; /* offs into local_buffer where valid data starts */ UINT32 wri_offs_frames; /* where to write fresh data in local_buffer */ UINT32 hidden_frames; /* ALSA reserve to ensure continuous rendering */ + UINT32 vol_adjusted_frames; /* Frames we've already adjusted the volume of but didn't write yet */ UINT32 data_in_alsa_frames; HANDLE timer; @@ -1970,18 +1971,134 @@ static BYTE *remap_channels(ACImpl *This, BYTE *buf, snd_pcm_uframes_t frames) return This->remapping_buf; } +static void adjust_buffer_volume(const ACImpl *This, BYTE *buf, snd_pcm_uframes_t frames, BOOL mute) +{ + float vol[ARRAY_SIZE(This->alsa_channel_map)]; + BOOL adjust = FALSE; + UINT32 i, channels; + BYTE *end; + + if (This->vol_adjusted_frames >= frames) + return; + channels = This->fmt->nChannels; + + if (mute) + { + int err = snd_pcm_format_set_silence(This->alsa_format, buf, frames * channels); + if (err < 0) + WARN("Setting buffer to silence failed: %d (%s)\n", err, snd_strerror(err)); + return; + } + + /* Adjust the buffer based on the volume for each channel */ + for (i = 0; i < channels; i++) + vol[i] = This->vols[i] * This->session->master_vol; + for (i = 0; i < This->session->channel_count; i++) + { + vol[i] *= This->session->channel_vols[i]; + adjust |= vol[i] != 1.0f; + } + while (i < channels) adjust |= vol[i++] != 1.0f; + if (!adjust) return; + + end = buf + frames * This->fmt->nBlockAlign; + buf += This->vol_adjusted_frames * This->fmt->nBlockAlign; + + switch (This->alsa_format) + { +#ifndef WORDS_BIGENDIAN +#define PROCESS_BUFFER(type) do \ +{ \ + type *p = (type*)buf; \ + do \ + { \ + for (i = 0; i < channels; i++) \ + p[i] = p[i] * vol[i]; \ + p += i; \ + } while ((BYTE*)p != end); \ +} while (0); + case SND_PCM_FORMAT_S16_LE: + PROCESS_BUFFER(INT16); + break; + case SND_PCM_FORMAT_S32_LE: + PROCESS_BUFFER(INT32); + break; + case SND_PCM_FORMAT_FLOAT_LE: + PROCESS_BUFFER(float); + break; + case SND_PCM_FORMAT_FLOAT64_LE: + PROCESS_BUFFER(double); + break; +#undef PROCESS_BUFFER + case SND_PCM_FORMAT_S20_3LE: + case SND_PCM_FORMAT_S24_3LE: + { + /* Do it 12 bytes at a time until it is no longer possible */ + UINT32 *q = (UINT32*)buf, mask = ~0xff; + BYTE *p; + + /* After we adjust the volume, we need to mask out low bits */ + if (This->alsa_format == SND_PCM_FORMAT_S20_3LE) + mask = ~0x0fff; + + i = 0; + while (end - (BYTE*)q >= 12) + { + UINT32 v[4], k; + v[0] = q[0] << 8; + v[1] = q[1] << 16 | (q[0] >> 16 & ~0xff); + v[2] = q[2] << 24 | (q[1] >> 8 & ~0xff); + v[3] = q[2] & ~0xff; + for (k = 0; k < 4; k++) + { + v[k] = (INT32)((INT32)v[k] * vol[i]); + v[k] &= mask; + if (++i == channels) i = 0; + } + *q++ = v[0] >> 8 | v[1] << 16; + *q++ = v[1] >> 16 | v[2] << 8; + *q++ = v[2] >> 24 | v[3]; + } + p = (BYTE*)q; + while (p != end) + { + UINT32 v = (INT32)((INT32)(p[0] << 8 | p[1] << 16 | p[2] << 24) * vol[i]); + v &= mask; + *p++ = v >> 8 & 0xff; + *p++ = v >> 16 & 0xff; + *p++ = v >> 24; + if (++i == channels) i = 0; + } + break; + } +#endif + case SND_PCM_FORMAT_U8: + { + UINT8 *p = (UINT8*)buf; + do + { + for (i = 0; i < channels; i++) + p[i] = (int)((p[i] - 128) * vol[i]) + 128; + p += i; + } while ((BYTE*)p != end); + break; + } + default: + TRACE("Unhandled format %i, not adjusting volume.\n", This->alsa_format); + break; + } +} + static snd_pcm_sframes_t alsa_write_best_effort(ACImpl *This, BYTE *buf, snd_pcm_uframes_t frames, BOOL mute) { snd_pcm_sframes_t written; - if(mute){ - int err; - if((err = snd_pcm_format_set_silence(This->alsa_format, buf, - frames * This->fmt->nChannels)) < 0) - WARN("Setting buffer to silence failed: %d (%s)\n", err, - snd_strerror(err)); - } + adjust_buffer_volume(This, buf, frames, mute); + + /* Mark the frames we've already adjusted */ + if (This->vol_adjusted_frames < frames) + This->vol_adjusted_frames = frames; buf = remap_channels(This, buf, frames); @@ -2005,6 +2122,8 @@ static snd_pcm_sframes_t alsa_write_best_effort(ACImpl *This, BYTE *buf, written = snd_pcm_writei(This->pcm_handle, buf, frames); } + if (written > 0) + This->vol_adjusted_frames -= written; return written; } @@ -2102,7 +2221,10 @@ static void alsa_write_data(ACImpl *This) /* Add a lead-in when starting with too few frames to ensure * continuous rendering. Additional benefit: Force ALSA to start. */ if(This->data_in_alsa_frames == 0 && This->held_frames < This->alsa_period_frames) + { alsa_write_best_effort(This, This->silence_buf, This->alsa_period_frames - This->held_frames, FALSE); + This->vol_adjusted_frames = 0; + } if(This->started) max_copy_frames = data_not_in_alsa(This); -- 2.21.0
participants (1)
-
Gabriel Ivăncescu