[Bug 11811] New: App sees no COM ports although COM1... 5 defined in dosdevices
http://bugs.winehq.org/show_bug.cgi?id=11811 Summary: App sees no COM ports although COM1...5 defined in dosdevices Product: Wine Version: 0.9.56. Platform: PC URL: http://rosepointnav.com/CoastalExplorer/Trial/default.ht m OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: n5470(a)pinefields.com Created an attachment (id=11072) --> (http://bugs.winehq.org/attachment.cgi?id=11072) Screen shot w/ error message Coastal Explorer has an Options section for connecting the app to COM ports for I/O (Tools -> Options -> Instruments -> Port Settings). All available COM ports are listed when running under Windows. Under Wine, none are found (see attached screen shot). Defined COM1...4 (/dev/ttyS0...3) and COM5 (/dev/ttyUSB0) were all chmod to 666 to ensure permissions weren't a problem; the problem remains. Without serial I/O, the app's function of reading a GPS' serial stream and writing commands to an autopilot controller (also via serial stream) is lost. Without it CE functions only as a trip planner and tide predictor. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #1 from RBEmerson <n5470(a)pinefields.com> 2008-03-01 21:04:41 --- Created an attachment (id=11073) --> (http://bugs.winehq.org/attachment.cgi?id=11073) Stderr o/p during bug event All of the stderr o/p except for the last four lines (each begins w/ "fixme") occurs at app startup. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #2 from RBEmerson <n5470(a)pinefields.com> 2008-03-01 21:11:24 --- NB: The app is functional, even at this reduced level, *only* with native comctl32.dll. Using builtin comctl32 breaks the toolbar/menus seen at the top of the screen (toolbar w/ icons isn't drawn) in the screen shot. There is no way (e.g., with keystrokes) to open the Options window or reach Port Settings without the toolbar. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Lei Zhang <thestig(a)google.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|major |normal Summary|App sees no COM ports |Coastal Explorer sees no COM |although COM1...5 defined in|ports |dosdevices | --- Comment #3 from Lei Zhang <thestig(a)google.com> 2008-03-02 01:00:26 --- (In reply to comment #2)
NB: The app is functional, even at this reduced level, *only* with native comctl32.dll. Using builtin comctl32 breaks the toolbar/menus seen at the top of the screen (toolbar w/ icons isn't drawn) in the screen shot. There is no way (e.g., with keystrokes) to open the Options window or reach Port Settings without the toolbar.
you should just mention bug 11548 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #4 from RBEmerson <n5470(a)pinefields.com> 2008-03-02 18:22:02 --- Attaching a GPS receiver to the Keyspan serial/USB adapter (known to work under Windows, and identified as /dev/ttyUSB0 when connected under Linux), as expected, had no influence on the app. The Instruments portion of Options includes a search for GPS data on serial ports. As before, nothing was found and the "computer" (sic) is reported to have no COM ports (links in .wine/dosdevices/ are not being used). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #5 from Lei Zhang <thestig(a)google.com> 2008-03-03 00:08:08 --- Can you make sure the device works properly under Linux first, and make sure the serial port works under wine? AFAIK most GPS devices with a serial interface are very easy to talk to with just a terminal program. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #6 from RBEmerson <n5470(a)pinefields.com> 2008-03-03 05:42:08 --- (In reply to comment #5)
Can you make sure the device works properly under Linux first, and make sure the serial port works under wine? AFAIK most GPS devices with a serial interface are very easy to talk to with just a terminal program.
The GPS receiver I used is essentially a 4800 baud ASCII source. It transmits ASCII sentences blindly (no handshaking, no RTS/CTS exchange, etc.). In fact, this particular combination (GPS receiver and laptop) were used together for two or three years, running CE under Windows on my boat. I tried the receiver on the outside chance that the app was actually seeing the ports but not reporting them because of no data on any port. For several reasons, I doubted that would work but it'd be silly not to try it. However, my thinking is still centered on the fact CE sees no ports at all, not the default COM1-4, or the added COM5 (/dev/ttyUSB0). To that end, please recommend a Windows app (HyperTerminal???) known to work reliably as a COM port test tool. I can handle reading the ports on the Linux side, to verify they're working. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #7 from Juan Lang <juan_lang(a)yahoo.com> 2008-03-03 14:10:41 --- This is probably due to how the app is enumerating the COM ports. On the hunch that it's using setupapi, could you try the workaround in bug 9902? Here's the .reg file to import from that bug: http://bugs.winehq.org/attachment.cgi?id=10210 You could also attach a +setupapi trace to confirm the hunch. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #8 from RBEmerson <n5470(a)pinefields.com> 2008-03-03 18:40:45 --- (In reply to comment #7)
This is probably due to how the app is enumerating the COM ports. On the hunch that it's using setupapi, could you try the workaround in bug 9902? Here's the .reg file to import from that bug: http://bugs.winehq.org/attachment.cgi?id=10210
You could also attach a +setupapi trace to confirm the hunch.
I read the bug comments (I've used the app, SOB, under Windows - there are many similarities in function, if not form, with CE) and .reg file - this sounds like a promising route. Being a noob and wanting to avoid complicating things with a bad guess on my part, would someone please post the type-in to add the .reg file cleanly? Ditto for using "+setupapi" in the right place. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #9 from RBEmerson <n5470(a)pinefields.com> 2008-03-03 18:47:49 --- (In reply to comment #6) [...]
The GPS receiver I used is essentially a 4800 baud ASCII source. It transmits ASCII sentences blindly (no handshaking, no RTS/CTS exchange, etc.). [...]
For the record, the NMEA (National Marine Electronics Assn.) standard for serial comms calls for ASCII strings sent at 4800 baud, 8N1. Some apps (including CE) will accept and send at other rates. And to add to the fun, UAIS (Universal Automatic Identification System - very loosely, a VHF band ID transonder system) receivers usually send their sentences at 38,400 baud. "Standards are so wonderful because there are so many to chose from." -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #10 from Juan Lang <juan_lang(a)yahoo.com> 2008-03-04 09:25:17 ---
Being a noob and wanting to avoid complicating things with a bad guess on my part, would someone please post the type-in to add the .reg file cleanly?
regedit foo.reg
Ditto for using "+setupapi" in the right place.
WINEDEBUG=+setupapi wine foo.exe >& log.txt -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #11 from RBEmerson <n5470(a)pinefields.com> 2008-03-04 12:48:08 --- Created an attachment (id=11112) --> (http://bugs.winehq.org/attachment.cgi?id=11112) +setupapi trace w/ manual port config attempted This trace was taken while launching Coastal Explorer (CE) and using the manual port setup feature (Tools -> Options -> Instruments -> Port Settings...). CE reported no COM ports found and none were created. The app was terminated normally. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #12 from RBEmerson <n5470(a)pinefields.com> 2008-03-04 12:51:22 --- Created an attachment (id=11113) --> (http://bugs.winehq.org/attachment.cgi?id=11113) +setupapi trace w/ automatic port config attempted Situation as in Attachment 11112 except automatic port setup was selected. No ports detected, as before. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #13 from RBEmerson <n5470(a)pinefields.com> 2008-03-04 13:24:35 --- (In reply to comment #10)
Being a noob and wanting to avoid complicating things with a bad guess on my part, would someone please post the type-in to add the .reg file cleanly?
regedit foo.reg
Ditto for using "+setupapi" in the right place.
WINEDEBUG=+setupapi wine foo.exe >& log.txt
The traces were run and posted. After running the traces, I planned to update the registry and re-run the traces for comparison. For some reason: regedit ~/RegEdit_COM.reg is totally unproductive. RegEdit_COM.reg contains the registry information in Attachment 10210, cut and pasted and verified by inspection. Regedit runs briefly (too briefly, for this platform) without comment. Inspecting HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceClasses\{4D36E978-E325-11CE-BFC1-08002BE10318}\##?#ACPI#PNP0501#1#{4D36E978-E325-11CE-BFC1-08002BE10318}\# there is only one entry, a symbolic link. If I understand the proposed changes, there should be five COM ports defined. What went wrong? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #14 from RBEmerson <n5470(a)pinefields.com> 2008-03-04 21:58:52 --- Sigh... I even tried importing the registry patch and... nothing. No error message, no change in the registry, nothing. What blindingly obvious point have I missed? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #15 from RBEmerson <n5470(a)pinefields.com> 2008-03-05 12:37:51 --- (In reply to comment #14)
Sigh... I even tried importing the registry patch and... nothing. No error message, no change in the registry, nothing. What blindingly obvious point have I missed?
I missed the point I was looking in the wrong place in the registry. Thank you to Juan Lang for his help with the registry patch and installation. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #16 from RBEmerson <n5470(a)pinefields.com> 2008-03-05 13:04:27 --- Created an attachment (id=11130) --> (http://bugs.winehq.org/attachment.cgi?id=11130) +setupapi trace run w/ revised registry keys The recommended registry changes were made and confirmed as being present. Launching Coastal Explorer with n5470(a)gazebo:~> WINEDEBUG=+setupapi wine "C:\Program Files\Coastal Explorer\Chart.exe" >& COMTestLog03.txt produced no change in CE's behavior. It still reports "no COM ports found" as before. A copy of the CE Application.log from the run is attached for inspection. The log format is nn.nnn:dd.ddd where nn.nnn is the total elapsed time from start of execution and dd.ddd is the elapsed time between log entries. Note that there is only one mention of COM ports: 7.167:0.003: Created AlarmController: 0x000001e8 (0x19) 29.096:21.929: Enumerating COM ports: 53.518:24.422: Shutting down... 53.563:0.045: Shutdown complete The shutdown was requested and is normal behavior. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #17 from RBEmerson <n5470(a)pinefields.com> 2008-03-05 13:06:28 --- Created an attachment (id=11131) --> (http://bugs.winehq.org/attachment.cgi?id=11131) App's native log from run to create attachment 11130 Application.log, created by Coastal Explorer, during the run that produced the trace shown in Attachment 11130. Note there is only one reference to COM ports: 7.167:0.003: Created AlarmController: 0x000001e8 (0x19) 29.096:21.929: Enumerating COM ports: 53.518:24.422: Shutting down... 53.563:0.045: Shutdown complete That there is no listing of ports below the line at 29.096 is not a good sign: no ports found. Shutdown is normal. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #18 from RBEmerson <n5470(a)pinefields.com> 2008-03-05 13:09:32 --- (From update of attachment 11131) 0.008:0.000: Coastal Explorer 1.1.61 was started at 13:27:48 on 3/5/2008 0.068:0.060: Module file name: "C:\Program Files\Coastal Explorer\Chart.exe" 0.078:0.010: Set working directory to: "C:\Program Files\Coastal Explorer" 0.176:0.098: Creating application window 0.517:0.341: MainFrame Window is 0x00010040 0.519:0.002: Showing application window 0.963:0.444: Checking for updates 0.984:0.021: InternetGetConnectedState: started 0.985:0.001: InternetGetConnectedState: complete 0.986:0.001: Created UpdateChecker: 0x00000078 (0x17) 0.987:0.001: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\Updates\Coastal Explorer.upd") 1.028:0.041: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\Updates\Coastal Explorer.upd") complete 1.031:0.003: Intializing alerts... 1.035:0.004: Intializing AIS... 1.038:0.003: Initializing ENC names database... 1.062:0.024: Initializing chart folder list... 1.145:0.083: Initializing navigation objects... 1.146:0.001: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\NavObjects\Vessel.nob") 1.160:0.014: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\NavObjects\Vessel.nob") complete 1.192:0.032: Initializing Maptech SDK support... 1.597:0.405: Maptech MTsdk lib vers 5.2.0.1 - Dec 6 2004, 17:12:44 1.599:0.002: Initializing chart database... 1.778:0.179: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\Updates\Coastal Explorer.upd") 1.779:0.001: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\Updates\Coastal Explorer.upd") complete 1.786:0.007: CheckUnitCharts(2, "C:\") 1.815:0.029: Scanning "C:\" for charts (serial #0x00000001)... 1.816:0.001: Folder "C:\BSB_ROOT" will be scanned for charts... 1.816:0.000: Folder "C:\CA_CHTS" will be scanned for charts... 1.817:0.001: Folder "C:\CHARTKIT" will be scanned for charts... 1.817:0.000: Folder "C:\Charts" will be scanned for charts... 1.817:0.000: Folder "C:\ENC_ROOT" will be scanned for charts... 1.817:0.000: Folder "C:\Index" will be scanned for charts... 1.818:0.001: Folder "C:\PhotoCht" will be scanned for charts... 1.818:0.000: Folder "C:\Program Files\Digital Ocean" will be scanned for charts... 1.818:0.000: Folder "C:\SENC" will be scanned for charts... 1.818:0.000: Folder "C:\SoftCht" will be scanned for charts... 2.730:0.912: 424 chart files found; 155 KAP files found. 2.731:0.001: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\CV_00000001.xml") 3.008:0.277: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\CV_00000001.xml") complete 3.010:0.002: Checking for new and/or removed charts... 3.047:0.037: Checking for orphaned KAP files 3.049:0.002: Found 0 orphaned KAP files 3.050:0.001: CheckUnitCharts(2, "C:\") complete 3.050:0.000: CheckUnitCharts(23, "X:\") 3.071:0.021: Scanning "X:\" for charts (serial #0x00000002)... 3.072:0.001: Folder "X:\BSB_ROOT" will be scanned for charts... 3.072:0.000: Folder "X:\CA_CHTS" will be scanned for charts... 3.073:0.001: Folder "X:\CHARTKIT" will be scanned for charts... 3.073:0.000: Folder "X:\Charts" will be scanned for charts... 3.073:0.000: Folder "X:\ENC_ROOT" will be scanned for charts... 3.073:0.000: Folder "X:\Index" will be scanned for charts... 3.073:0.000: Folder "X:\PhotoCht" will be scanned for charts... 3.074:0.001: Folder "X:\Program Files\Digital Ocean" will be scanned for charts... 3.074:0.000: Folder "X:\SENC" will be scanned for charts... 3.074:0.000: Folder "X:\SoftCht" will be scanned for charts... 3.108:0.034: 7 chart files found; 0 KAP files found. 3.110:0.002: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\CV_00000002.xml") 3.125:0.015: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\CV_00000002.xml") complete 3.127:0.002: Checking for new and/or removed charts... 3.127:0.000: CheckUnitCharts(23, "X:\") complete 3.128:0.001: CheckUnitCharts(24, "Y:\") 3.145:0.017: Scanning "Y:\" for charts (serial #0x00000003)... 3.146:0.001: Folder "Y:\BSB_ROOT" will be scanned for charts... 3.146:0.000: Folder "Y:\CA_CHTS" will be scanned for charts... 3.146:0.000: Folder "Y:\CHARTKIT" will be scanned for charts... 3.147:0.001: Folder "Y:\Charts" will be scanned for charts... 3.147:0.000: Folder "Y:\ENC_ROOT" will be scanned for charts... 3.147:0.000: Folder "Y:\Index" will be scanned for charts... 3.147:0.000: Folder "Y:\PhotoCht" will be scanned for charts... 3.148:0.001: Folder "Y:\Program Files\Digital Ocean" will be scanned for charts... 3.148:0.000: Folder "Y:\SENC" will be scanned for charts... 3.148:0.000: Folder "Y:\SoftCht" will be scanned for charts... 3.155:0.007: 0 chart files found; 0 KAP files found. 3.156:0.001: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\CV_00000003.xml") 3.157:0.001: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\CV_00000003.xml") complete 3.157:0.000: CheckUnitCharts(24, "Y:\") complete: no charts! 3.158:0.001: CheckUnitCharts(25, "Z:\") 3.160:0.002: Scanning "Z:\" for charts (serial #0x00000000)... 3.160:0.000: Folder "Z:\BSB_ROOT" will be scanned for charts... 3.161:0.001: Folder "Z:\CA_CHTS" will be scanned for charts... 3.161:0.000: Folder "Z:\CHARTKIT" will be scanned for charts... 3.161:0.000: Folder "Z:\Charts" will be scanned for charts... 3.161:0.000: Folder "Z:\ENC_ROOT" will be scanned for charts... 3.162:0.001: Folder "Z:\Index" will be scanned for charts... 3.162:0.000: Folder "Z:\PhotoCht" will be scanned for charts... 3.162:0.000: Folder "Z:\Program Files\Digital Ocean" will be scanned for charts... 3.162:0.000: Folder "Z:\SENC" will be scanned for charts... 3.162:0.000: Folder "Z:\SoftCht" will be scanned for charts... 3.199:0.037: 0 chart files found; 0 KAP files found. 3.200:0.001: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\CV_00000000.xml") 3.260:0.060: ReadXml("c:\windows\profiles\All Users\Application Data\Rose Point Navigation Systems\CV_00000000.xml") complete 3.261:0.001: Checking for new and/or removed charts... 3.275:0.014: CheckUnitCharts(25, "Z:\") complete 3.303:0.028: Initializing ports... 3.305:0.002: Initializing ENC sub-system... 4.162:0.857: Initializing gazetteer... 5.599:1.437: Initializing Guide Books... 5.873:0.274: Initializing Tide Database... 6.032:0.159: Loaded Tides Database 6.034:0.002: Initializing Weather Database... 6.817:0.783: Initializing autopilot... 6.821:0.004: Initializing package handler... 6.824:0.003: Settting app state to 'ready' 6.845:0.021: Created TerraTileCache: 0x000001e0 (0x18) 6.992:0.147: ReadXml("c:\windows\profiles\n5470\Local Settings\Application Data\Rose Point Navigation Systems\AutoSave.nob") 6.993:0.001: ReadXml("c:\windows\profiles\n5470\Local Settings\Application Data\Rose Point Navigation Systems\AutoSave.nob") complete 6.994:0.001: Creating initial chart viewer... 6.994:0.000: Attempting to open most recent file... 7.000:0.006: OnOpenDocument: C:\Program Files\Coastal Explorer\20080224001.nob 7.003:0.003: ReadXml("C:\Program Files\Coastal Explorer\20080224001.nob") 7.011:0.008: ReadXml("C:\Program Files\Coastal Explorer\20080224001.nob") complete 7.164:0.153: Initialization complete in 7.164 seconds. 7.167:0.003: Created AlarmController: 0x000001e8 (0x19) 29.096:21.929: Enumerating COM ports: 53.518:24.422: Shutting down... 53.563:0.045: Shutdown complete -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #19 from RBEmerson <n5470(a)pinefields.com> 2008-03-05 14:00:27 --- Created an attachment (id=11137) --> (http://bugs.winehq.org/attachment.cgi?id=11137) App's native log from run under WinXP Note the creation of ports COM6...8 (the telnet port should have been removed - the IP addy's dead for testing). The read failures are acceptable - the ports are driven by a Keysapn 4-port serial/USB adapter and not available at the moment. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #20 from Juan Lang <juan_lang(a)yahoo.com> 2008-03-05 18:25:03 --- Created an attachment (id=11147) --> (http://bugs.winehq.org/attachment.cgi?id=11147) Another reg fix It looks like it's trying to enumerate the interface GUID_CLASS_COMPORT. Could you import this one as well and see what it does? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Juan Lang <juan_lang(a)yahoo.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |juan_lang(a)yahoo.com -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #21 from RBEmerson <n5470(a)pinefields.com> 2008-03-05 21:20:03 --- (In reply to comment #20)
Created an attachment (id=11147) --> (http://bugs.winehq.org/attachment.cgi?id=11147) [details] Another reg fix
It looks like it's trying to enumerate the interface GUID_CLASS_COMPORT. Could you import this one as well and see what it does?
Installed and run - no change in the "No COM ports" message. The relevant part of the Application.log reads: 6.110:0.148: Initialization complete in 6.110 seconds. 6.112:0.002: Created AlarmController: 0x000001ec (0x17) 25.654:19.542: Enumerating COM ports: 82.749:57.095: Shutting down... 82.823:0.074: Shutdown complete The trace will go up as soon as I hit commit for this post. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #22 from RBEmerson <n5470(a)pinefields.com> 2008-03-05 21:23:49 --- Created an attachment (id=11152) --> (http://bugs.winehq.org/attachment.cgi?id=11152) +setupapi trace run w/ GUID_CLASS_COMPORT reg mod New reg mod but no change in bug; no COM ports reported. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #23 from RBEmerson <n5470(a)pinefields.com> 2008-03-08 21:48:59 --- No change in this bug under Wine 0.9.57. ~/.wine was deleted and created from scratch with winecfg after installing 0.9.57. Comctl32.dll was replaced with the native version to enable menu access needed to check COM port registration, if any. None found. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #24 from RBEmerson <n5470(a)pinefields.com> 2008-03-09 14:34:33 --- (In reply to comment #23)
No change in this bug under Wine 0.9.57. ~/.wine was deleted and created from scratch with winecfg after installing 0.9.57. Comctl32.dll was replaced with the native version to enable menu access needed to check COM port registration, if any. None found.
Problem duplicated on a second platform running openSUSE 10.3 and Wine 0.9.57 (fresh ~/.wine). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Lei Zhang <thestig(a)google.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|UNCONFIRMED |NEW Ever Confirmed|0 |1 --- Comment #25 from Lei Zhang <thestig(a)google.com> 2008-03-10 01:42:29 --- Ok, I have a CF GPS plugged into my laptop. Linux sees it just fine. Gave Coastal Explorer a quick try. So, in addition to Juan's registry files, in order for Coastal Explorer to just find the COM port, it looks like you need to have the proper registry values in: - HKLM\HARDWARE\DEVICEMAP\SERIALCOMM This existed when I first ran wineprefixcreate, but it has no entries. I think after I ran Coastal Explorer, it got deleted. - HKLM\SYSTEM\CurrentControlSet\Services\Mouclass\Enum This registry key never existed. I have no idea what these keys do exactly, so I can't actually help you fix this. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #26 from RBEmerson <n5470(a)pinefields.com> 2008-03-10 14:09:22 --- The following is from the application's company: "Coastal Explorer enumerates the 'HKEY_LOCAL_MACHINE\HARDWARE\\DEVICEMAP\\SERIALCOMM' registry key to get a list of COM port. Given that it only accesses that key with a read-only request, it should be impossible for the key to be accidentally deleted! "Coastal Explorer also uses the hardware setup API in order to find the 'friendly name' of each port. This is not depended upon, however, since not all COM port drivers implement it correctly. If you see a COM port listed anywhere in Coastal Explorer and the name is plain and un-friendly like 'COM3' then it's because the driver for that port isn't 'complete'. When something shows up like 'Keyspan USA-19HS (COM5)' then it's because COM5 was found in the above mentioned registry and the 'Keyspan USA-19HS' was found using the device setup API." The Keyspan USA-19HS is a serial/USB converter, with built-in kernel support in many distros including openSUSE (not Debian or Ubuntu). If the SERIALCOMM key is being tossed out, the obvious questions are what does this, when, and why. At the moment, inspecting HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP shows only one entry: Scsi (Scsi Port 0 and Scsi Port 1 - both identified as using the "WINE SCSI" driver). This despite the fact the USA-19HS is connected and powered up. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #27 from RBEmerson <n5470(a)pinefields.com> 2008-03-10 14:38:21 --- Looking at the proposed registry patches and the recent comments about how CE works, it appears the reason the patches don't work is they've gone to the wrong place, or at least not where, if I understand the comments correctly, CE is looking for info about serial ports. I tried installing them on the Wine 0.9.57 install and fresh .wine with no change (COM ports not found). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Hans Leidekker <hans(a)it.vu.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |hans(a)it.vu.nl --- Comment #28 from Hans Leidekker <hans(a)it.vu.nl> 2008-03-17 15:42:29 --- If you have a Windows machine available, use regedit to export the key HKEY_LOCAL_MACHINE\HARDWARE\\DEVICEMAP\\SERIALCOMM after plugging in the Keyspan USA-19HS and import it in Wine. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #29 from RBEmerson <n5470(a)pinefields.com> 2008-03-17 21:28:58 --- Created an attachment (id=11464) --> (http://bugs.winehq.org/attachment.cgi?id=11464) HKEY_LOCAL_MACHINE\HARDWARE\\DEVICEMAP\\SERIALCOMM w/ Keysapn adapter Native HKEY_LOCAL_MACHINE\HARDWARE\\DEVICEMAP\\SERIALCOMM with Keyspan Adapter in place. "\\Device\\19H2KP0"="COM4" is added with the Keyspan adapter in place. Attempts to add this to the registry with: regedit ~/Documents/Serialcomm_02.reg were unsuccessful, or at least SERIALCOMM doesn't show up in the registry. Note that in the native registry, SERIALCOMM always contains: "Winachsf0"="COM3" regardless of the state of the adapter. Under Wine, SERIALCOMM is not found at all, only SCSI is in HKEY_LOCAL_MACHINE\HARDWARE\\DEVICEMAP even though the adapter's status light is flashing as expected. It should be noted that the kernel in openSUSE 10.3, my test platform, is known to support Keyspan adapters (Debian and Ubuntu, at least, do not). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #30 from Hans Leidekker <hans(a)it.vu.nl> 2008-03-19 09:10:23 --- It's a volatile key so you have to keep some app running in the background: $ notepad & $ regedit ~/Documents/Serialcomm_02.reg $ ln -s /dev/ttyS0 ~/.wine/dosdevices/com4 $ wine CE.exe Where com4 should match what's in the registry file for your Keyspan device and /dev/ttyS0 should be the com port that your GPS device is attached to. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #31 from RBEmerson <n5470(a)pinefields.com> 2008-03-19 21:22:34 --- Things started working, with a COM port, as expected. (In reply to comment #30)
It's a volatile key so you have to keep some app running in the background:
$ notepad & $ regedit ~/Documents/Serialcomm_02.reg $ ln -s /dev/ttyS0 ~/.wine/dosdevices/com4 $ wine CE.exe
Where com4 should match what's in the registry file for your Keyspan device and /dev/ttyS0 should be the com port that your GPS device is attached to.
The registry patch was changed to COM5 to avoid a collision with COM4, defined earlier. The link was adjusted to link /dev/ttyUSB0 to [...]/com5 - note the use of the USB system in place of a standard serial port. CE's automatic port detection process found COM3 and COM5 (expected results). The port definition tool showed COM5 to be a "listener" operating in "NMEA0183" format at 4800 baud. CE has a NMEA input logging tool and I was able to capture the input stream and later play it back (<SHIFT>right-click in the chart area, choose NMEA Log Playback in the resulting menu, follow the file selector prompts). I hope to collect a much richer NMEA stream in the next couple of days, and play it back to see how CE responds to a full data stream. CE has a "Troubleshooter" function that displays NMEA data seen and sent on any one port. I was able to see data moving in both directions (i.e., GPS data in, autopilot steering commands out). Note that the Troubleshooter window is almost the same size as the Instruments window and Troubleshooter appears behind Instruments. Drag the Instruments window to see the Troubleshooter enough to raise it to the top of the window stack. (this will be reported in a new Bug) - - - The next step, it seems to me, is to be able to create, dynamically (as the number of serial/USB ports in use by CE changes - as it very realistically can) the needed registry entries when CE alone launches, without another, background app (e.e., notepad) running to keep transient patches in place. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #32 from RBEmerson <n5470(a)pinefields.com> 2008-03-19 21:26:59 --- The following "err:" messages are probably tied to the use of COM5: fixme:menu:TrackPopupMenuEx not fully implemented err:comm:get_baud_rate tcgetattr error 'Input/output error' err:comm:set_baud_rate tcgetattr error 'Input/output error' fixme:menu:TrackPopupMenuEx not fully implemented I didn't try to shift the GPS' data rate from 4800 baud (NMEA default rate) and data was received in good order, so I'm not sure what the complaint really is, but there it is. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #33 from Hans Leidekker <hans(a)it.vu.nl> 2008-03-20 03:45:48 ---
Things started working, with a COM port, as expected.
Hey, that's great!
The next step, it seems to me, is to be able to create, dynamically (as the number of serial/USB ports in use by CE changes - as it very realistically can) the needed registry entries when CE alone launches, without another, background app (e.e., notepad) running to keep transient patches in place.
Yes, and it should be a pretty straightforward extension of our hal support.
err:comm:get_baud_rate tcgetattr error 'Input/output error' err:comm:set_baud_rate tcgetattr error 'Input/output error'
I think this means that your Linux serial driver doesn't support getting or setting the baud rate. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #34 from RBEmerson <n5470(a)pinefields.com> 2008-03-20 08:12:46 --- A few thoughts on the COM port issue... First, the Keyspan driver is bundled with most Linux distros (but not all, Ubuntu and Debian do not include it because of, I think, GPL issues). Put another way, this is not a driver or module I added to my initial system installation, it's a default item. Second, in testing the application just now, the error messages didn't show up at all. I selected a number of different rates up to 38400 and down to 110 (hint: very much not recommended for the CPU-bound!). Without a terminal to watch the serial output, it's dangerous to assume the data was sent properly. However, the status light on the converter changed its blink rate consistent with moving from 4800 to 38400 and down from 4800 to 300 and 110. More importantly, the gripes about get and set serial rates didn't show up. Third, further testing shows that the message is related to the automatic port detection process. The problem arises when testing COM3 (a legacy of the native SERIALCOMM keys). Since COM3 is a "nonsense" port (not tied to any existing hardware), the error message is, in fact, appropriate (i.e., COM3 won't allow a get or set rate because it's not really there). Removing COM3 from the SERIALCOMM key and doing an autodetect shows the problem is fixed: no (bogus) port, no error message. Finally, it appears that "all" that's needed to support the creation of the needed transient COM port entries in SERIALCOMM and this bug can be closed out. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #35 from Austin English <austinenglish(a)gmail.com> 2008-10-23 15:22:36 --- Is this still an issue in current (1.1.6 or newer) wine? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #36 from Juan Lang <juan_lang(a)yahoo.com> 2008-10-23 15:57:21 --- Still an issue. The serial ports need to be added dynamically to the registry, and there isn't any code to do that yet. (There should probably be a .sys kind of like mountmgr.sys that handles them.) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Andrew Charles Hurst <a.hurst(a)shef.ac.uk> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |a.hurst(a)shef.ac.uk --- Comment #37 from Andrew Charles Hurst <a.hurst(a)shef.ac.uk> 2008-11-03 13:43:58 --- Hi folks, I'm thinking of picking this up to get a firmware loader working through the serial ports for my Digifly Vario. I see that wine.inf (via wineboot) does create \\DEVICEMAP\SERIALCOMM. The entries COM1 etc are never populated, however. In theory one simply scans .wine/dosdevices for com ports people have symlinked. I think mountmgr.sys type implementation is too much: either the symlink is there, or it's not. However, at the moment, something is wiping the SERIALCOMM and PARALLEL PORTS entries: I think it might be create_scsi_entry code in dlls/kernel/oldconfig.c. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Mike Davies <linux_bugs(a)rovoreed.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |linux_bugs(a)rovoreed.com --- Comment #38 from Mike Davies <linux_bugs(a)rovoreed.com> 2008-11-06 12:33:33 --- (In reply to comment #37)
Hi folks, I'm thinking of picking this up to get a firmware loader working through the serial ports for my Digifly Vario.
I see that wine.inf (via wineboot) does create \\DEVICEMAP\SERIALCOMM. The entries COM1 etc are never populated, however. In theory one simply scans .wine/dosdevices for com ports people have symlinked. I think mountmgr.sys type implementation is too much: either the symlink is there, or it's not.
However, at the moment, something is wiping the SERIALCOMM and PARALLEL PORTS entries: I think it might be create_scsi_entry code in dlls/kernel/oldconfig.c.
According to Microsoft http://support.microsoft.com/kb/102988/en-us this part of the registry (HKLM\hardware) gets wiped each time windows starts. If you are working on this great - sooner the better please :-) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #39 from Andrew Charles Hurst <a.hurst(a)shef.ac.uk> 2008-11-06 16:34:06 --- Thanks for the info Mike, should be fairly straightforward to build an entry per com* symlink in dosdevices, and can read HKCU\Software\Wine\something for anything other than default (115200 8,n,1) config. All I need is the right place to do it.. i think in kernel/oldconfig.c following the example of create_scsi_entry(). I think Vitaliy would be a good person to quiz about this. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #40 from Vitaliy Margolen <vitaliy(a)kievinfo.com> 2008-11-06 20:47:38 --- (In reply to comment #39) Should work. AJ doesn't like it but there is no other good place for it. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #41 from Andrew Charles Hurst <a.hurst(a)shef.ac.uk> 2008-11-11 14:31:51 --- Created an attachment (id=17220) --> (http://bugs.winehq.org/attachment.cgi?id=17220) Proposed patch This adds the SERIALCOMM entries. Vitaliy, could you take a look? Thanks Andy -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Austin English <austinenglish(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Keywords| |download, patch -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Austin English <austinenglish(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Keywords| |hardware -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #42 from Mike Davies <linux_bugs(a)rovoreed.com> 2008-11-12 05:04:07 --- (In reply to comment #41)
Created an attachment (id=17220) --> (http://bugs.winehq.org/attachment.cgi?id=17220) [details] Proposed patch
Work OK for me ! The program I am testing is SX-Key v3.2.3. My only comment is that it's case sensitive. i.e. it likes com1 but not COM1. I don't know if this is an issue or not. Mike -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #43 from Andrew Charles Hurst <a.hurst(a)shef.ac.uk> 2008-11-12 13:03:30 --- I don't know if it's an issue either.. The drive letters ARE case sensitive, so 'd:' works, 'D:' is missed. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #44 from Andrew Charles Hurst <a.hurst(a)shef.ac.uk> 2008-11-12 13:36:30 --- The docs (http://www.winehq.org/site/docs/wineusr-guide/misc-things-to-configure) only mention lowercase 'com1,2..' names, I'll just email the patch and see how we go. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Andrew Charles Hurst <a.hurst(a)shef.ac.uk> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #17220|0 |1 is obsolete| | --- Comment #45 from Andrew Charles Hurst <a.hurst(a)shef.ac.uk> 2008-11-19 09:16:56 --- Created an attachment (id=17358) --> (http://bugs.winehq.org/attachment.cgi?id=17358) Patch: This is the patch I sent most recently to wine-patches. I think it's there, fingers crossed it'll be accepted soon. Have also patched a bug which allows enumeration of potentially unlimited COM ports by mistake when using e.g. CreateFile(.."\\.\COM236".. since it read only the char directly after "COM" in ntdll/directory.c/get_dos_device() -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Andrew Charles Hurst <a.hurst(a)shef.ac.uk> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #17358|0 |1 is obsolete| | --- Comment #46 from Andrew Charles Hurst <a.hurst(a)shef.ac.uk> 2008-11-19 13:44:09 --- Created an attachment (id=17361) --> (http://bugs.winehq.org/attachment.cgi?id=17361) Patch: Spotted a mistake in RtlMultiByteToUnicodeN params: BytesInMultiByteString should include the null terminator -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Shane Kennedy <sbkenn(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |sbkenn(a)gmail.com --- Comment #47 from Shane Kennedy <sbkenn(a)gmail.com> 2008-11-28 19:05:26 --- Which wine version does the patch apply to, and has it been incorporated in later/latest version ? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Andrew Charles Hurst <a.hurst(a)shef.ac.uk> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #17361|0 |1 is obsolete| | --- Comment #48 from Andrew Charles Hurst <a.hurst(a)shef.ac.uk> 2008-11-29 03:24:39 --- Created an attachment (id=17535) --> (http://bugs.winehq.org/attachment.cgi?id=17535) Patch Newest iteration of patch. Scans /dev/ttyS* and then dosdevices/com* to override. The patch will apply to any recent wine version (since 2006?) - I don't think oldconfig.c has been touched in a while. It hasn't been accepted into the source tree, since they are keen on implementing the HAL instead of adding to the local hacks for hardware support. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Louis Lenders <xerox_xerox2000(a)yahoo.co.uk> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |harterc1(a)comcast.net --- Comment #49 from Louis Lenders <xerox_xerox2000(a)yahoo.co.uk> 2009-08-26 18:23:50 --- *** Bug 17698 has been marked as a duplicate of this bug. *** -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Louis Lenders <xerox_xerox2000(a)yahoo.co.uk> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |dmitriy.geels(a)gmail.com --- Comment #50 from Louis Lenders <xerox_xerox2000(a)yahoo.co.uk> 2009-08-26 18:27:10 --- *** Bug 15091 has been marked as a duplicate of this bug. *** -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Saulius K. <saulius2(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |saulius2(a)gmail.com -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Graham Inggs <graham(a)nerve.org.za> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |graham(a)nerve.org.za -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Bruno Jesus <00cpxxx(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |00cpxxx(a)gmail.com --- Comment #51 from Bruno Jesus <00cpxxx(a)gmail.com> 2011-11-17 19:53:50 CST --- Almost 3 years without user posts, application is not available for download anymore. Can anyone with an old copy of the application retest in latest wine? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #52 from Graham Inggs <graham(a)nerve.org.za> 2011-11-18 04:43:31 CST --- I have just tested one of the other applications affected by this bug, HyperTerminal Private Edition 6.3, in a clean WINEPREFIX in Wine 1.3.32 and the problem still exists. I created a symbolic link for COM1, documented here: http://www.winehq.org/docs/wineusr-guide/misc-things-to-configure ln -s /dev/ttyS0 ~/.wine/dosdevices/com1 HyperTerminal does not list any COM ports, only a TCP/IP (Winsock) connection is available. I then created a registry entry for the serial port, as suggested in this bug report: http://bugs.winehq.org/show_bug.cgi?id=4282 Add the following lines to .wine/system.reg [Hardware\\Devicemap\\SerialComm] "Serial0"="COM1" HyperTerminal now shows COM1 and TCP/IP (Winsock)as available connections. What is the status of Andrew Hurst's patch, was it ever included in Wine? HyperTerminal Private Edition 6.3 is available for download here: http://www.hilgraeve.com/htpe/support/htpe63.exe -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #53 from Saulius K. <saulius2(a)gmail.com> 2011-11-18 11:36:14 CST --- Then there is "floAt's Mobile Agent" from bug 15091 : http://sourceforge.net/projects/fma/files/FMA%20(Beta)/ -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #54 from Graham Inggs <graham(a)nerve.org.za> 2011-12-08 08:24:47 CST --- I believe this is a duplicate of bug 1700 (which should be re-opened). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 André H. <nerv(a)dawncrow.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |nerv(a)dawncrow.de --- Comment #55 from André H. <nerv(a)dawncrow.de> 2013-06-04 15:51:10 CDT --- What about cleaning up the patch some more and resend? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 nucleo <nucleo(a)fedoraproject.org> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |nucleo(a)fedoraproject.org -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Anastasius Focht <focht(a)gmx.net> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |harsh_0707051(a)rediffmail.co | |m --- Comment #56 from Anastasius Focht <focht(a)gmx.net> --- *** Bug 26806 has been marked as a duplicate of this bug. *** -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 André H. <nerv(a)dawncrow.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #11147|application/octet-stream |text/plain mime type| | -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 André H. <nerv(a)dawncrow.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #11464|application/octet-stream |text/plain mime type| | -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Anastasius Focht <focht(a)gmx.net> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |focht(a)gmx.net Summary|Coastal Explorer sees no |Multiple applications fail |COM ports |to enumerate serial ports | |('HKLM\\HARDWARE\\DeviceMap | |\\Serialcomm' registry | |entries)(Coastal Explorer, | |GPS apps, HyperTerminal) Alias|NoCOMsFound | --- Comment #57 from Anastasius Focht <focht(a)gmx.net> --- Hello folks, refining summary to allow for easier search and collecting dupes here. Obviously still present as of Wine 1.7.9 Regards -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Anastasius Focht <focht(a)gmx.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Blocks| |4633 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 Fred Wright <fw(a)fwright.net> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |fw(a)fwright.net --- Comment #58 from Fred Wright <fw(a)fwright.net> --- One thing I haven't seen mentioned in this thread is that the DEVICEMAP keys are *volatile*, which means that adding them manually only lasts as long as the current incarnation of wineserver. Obviously the best solution is for wineserver to create the keys when it starts up, but in the meantime, the options are: 1) Launch wineserver with -p, then edit the registry. 2) Leave regedit running (after making the edit(s)) until the serial application is launched. 3) Create a wrapper that keeps wineserver up while making the necessary registry fixes and running the application. I've implemented #3 as a Python script, which I'll upload. The application I'm using only seems to care about the values, not the value names, so I elected to derive the value names from the actual device names, but with a bit of "Windowsification". E.g., "/dev/cu.XXX" -> "\Device\cu.XXX". Actual Windows systems have names of the form "\Device\Serial0", "\Device\BthModem0", etc., which are somewhat less informative. I've tested this with SXBlue Config running under Wine 1.62 on OSX 10.9.1. It also has code to perform the equivalent setup for parallel ports, but that's untested. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #59 from Fred Wright <fw(a)fwright.net> --- Created attachment 47420 --> http://bugs.winehq.org/attachment.cgi?id=47420 Wrapper script (in Python) to work around DEVICEMAP bug To observe the effects, just run "portwine.py regedit" and examine the SERIALCOMM and/or PARALLEL PORTS keys under HKLM\HARDWARE\DEVICEMAP. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 super_man(a)post.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |super_man(a)post.com --- Comment #60 from super_man(a)post.com --- The patch mentioned at comment #48 still applies against git, expect this part of it (taken from the .rej file) --- dlls/kernel32/oldconfig.c +++ dlls/kernel32/oldconfig.c @@ -606,5 +749,6 @@ return; /* someone else already loaded the registry */ /* create some hardware keys (FIXME: should not be done here) */ - create_hardware_branch(); + create_scsi_branch(); + create_serialcomm_branch(); } wine 1.7.51 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 André H. <nerv(a)dawncrow.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #17535|0 |1 is obsolete| | --- Comment #61 from André H. <nerv(a)dawncrow.de> --- Created attachment 52383 --> https://bugs.winehq.org/attachment.cgi?id=52383 Updated patch Updated patch from comment #48 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #62 from André H. <nerv(a)dawncrow.de> --- I just sent a patch to the mailing list, please test it: (Already successfully tested it with "Terminal") https://source.winehq.org/patches/data/114615 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 --- Comment #63 from André H. <nerv(a)dawncrow.de> --- Totally new approach: https://source.winehq.org/patches/data/115289 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 winetest(a)luukku.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |winetest(a)luukku.com --- Comment #64 from winetest(a)luukku.com --- (In reply to André H. from comment #63)
Totally new approach: https://source.winehq.org/patches/data/115289
patching file programs/wineboot/wineboot.c Hunk #3 succeeded at 1288 (offset -1 lines). wine 1.9.22-git. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 Alex Henrie <alexhenrie24(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |alexhenrie24(a)gmail.com --- Comment #65 from Alex Henrie <alexhenrie24(a)gmail.com> --- This bug also affects TI Connect: https://education.ti.com/en/software/details/en/B59F6C83468C4574ABFEE93D2BC3... -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 Alex Henrie <alexhenrie24(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|--- |FIXED Status|NEW |RESOLVED Fixed by SHA1| |a6cdfea1c1afa064e8d352935c4 | |ce8b2140a4294 --- Comment #66 from Alex Henrie <alexhenrie24(a)gmail.com> --- Fixed by https://source.winehq.org/git/wine.git/commitdiff/a6cdfea1c1afa064e8d352935c... After the next biweekly Wine release, I will update https://wiki.winehq.org/Wine_User%27s_Guide#Serial_and_Parallel_Ports with information about how to use HKEY_LOCAL_MACHINE\Software\Wine\Ports to override the serial and parallel port autodetection. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 Alex Henrie <alexhenrie24(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Component|-unknown |mountmgr.sys -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 Alexandre Julliard <julliard(a)winehq.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |CLOSED --- Comment #67 from Alexandre Julliard <julliard(a)winehq.org> --- Closing bugs fixed in 2.8. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 Alex Henrie <alexhenrie24(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |calcprogrammer1(a)gmail.com --- Comment #68 from Alex Henrie <alexhenrie24(a)gmail.com> --- *** Bug 30409 has been marked as a duplicate of this bug. *** -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=11811 Alex Henrie <alexhenrie24(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |winebugzilla(a)k2c42.dy.fi --- Comment #69 from Alex Henrie <alexhenrie24(a)gmail.com> --- *** Bug 40121 has been marked as a duplicate of this bug. *** -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.
participants (1)
-
wine-bugs＠winehq.org