February 2001 - Wine-Devel - list.winehq.org

TCP/IP networking and registry keys
by Alan Chandler March 6, 2001

March 6, 2001

I spent most of the weekend trying to get Grand Prix Legends GPL to work. I achieved my first goal of getting it to run in server mode. One of the things I needed to get the game to do, was to recognise that there where some interfaces it could talk TCP/IP out of. It took me some time to realise that under windows it was doing this by looking for the key [System\\CurrentControlSet\\Services\\Class\\NetTrans] and was then enumerating the keys under it to establish an IP address ie the following [System\\CurrentControlSet\\Services\\Class\\NetTrans\\0000] "IPAddress"="10.0.10.100" The thought occurred to me that maybe the tool the builds the registry during wine install could actually create these keys - since it is essentially a key part of the system (and other similar keys are also built in the same way). I don't think I have the skills to do it myself yet. Alan alan(a)chandlerfamily.org.uk http://www.chandler.u-net.com

3 2

New execution behavior
by Duane Clark Feb. 28, 2001

Feb. 28, 2001

Howdy, Here is a symptom that has crept into the recent version of wine. Since I know how to make things work, this is just a post in case someone is interested. When I recently updated to the Feb 24 CVS version (from the Feb 4 version), I suddenly had the symptom that I could only run one program at a time. In other words, I ran the program schedit (one I use regularly), and it came up and worked fine. But when I then tried to also run symed, it would not come up, but instead gave: err:ntdll:RtlpWaitForCriticalSection Critical section 0x400f9ad0 wait timed out, retrying (60 sec) fs=022f Where the address 0x400f9ad0 is in: disas 0x400f9ad0 0x400f9ad0 (peb_lock [rtl.c]): addb %al,0x0(%eax) 0x400f9ad2 (peb_lock+0x2 [rtl.c]): addb %al,0x0(%eax) 0x400f9ad4 (peb_lock+0x4 [rtl.c]): 0x400f9ad6 (peb_lock+0x6 [rtl.c]): 0x400f9ad8 (peb_lock+0x8 [rtl.c]): addb %al,0x0(%eax) 0x400f9ada (peb_lock+0xa [rtl.c]): addb %al,0x0(%eax) 0x400f9adc (peb_lock+0xc [rtl.c]): addb %al,0x0(%eax) 0x400f9ade (peb_lock+0xe [rtl.c]): addb %al,0x0(%eax) 0x400f9ae0 (peb_lock+0x10 [rtl.c]): cmpb $0,%al 0x400f9ae2 (peb_lock+0x12 [rtl.c]): addb %al,0x0(%eax) Wine-dbg> Trying a couple other programs showed that this affected all of them. In particular, one that is more readily available, Wordview97. For example, I could run one instance of wordview, but not a second. This is running wine along with a Win98 installation. It turns out the for some obscure reason I had the DLLs exactly as in the sample config file, except that I had: "DefaultLoadOrder" = "builtin, native, so" Putting it the (presumably) right way fixed things (except a wordview font problem): "DefaultLoadOrder" = "native, builtin, so" Here is info on the the loading of DLLs. The only differences I see with native first is with ole32 being native instead of builtin, and that rpcrt4 gets loaded much later. Here is with "DefaultLoadOrder" = "native, builtin, so" trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\kernel32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\advapi32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\gdi32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\user32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\ole32.dll' : native trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\mso97v.dll' : native trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\Program Files\WordView\wwint32v.dll' : native trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\shlwapi.dll' : native trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\comctl32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\shell32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\winspool.drv' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'krnl386.exe' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'system' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'wprocs' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'GDI.EXE' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\WINDOWS\SYSTEM\wineps.DLL' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'USER.EXE' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\WINDOWS\SYSTEM\x11drv.DLL' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'display' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\comdlg32.dll' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'commdlg.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\rpcrt4.dll' : native And here is with "DefaultLoadOrder" = "builtin, native, so" trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\kernel32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\advapi32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\gdi32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\user32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\rpcrt4.dll' : native trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\ole32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\mso97v.dll' : native trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\Program Files\WordView\wwint32v.dll' : native trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\shlwapi.dll' : native trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\comctl32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\shell32.dll' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\winspool.drv' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'krnl386.exe' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'system' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'wprocs' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'GDI.EXE' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\WINDOWS\SYSTEM\wineps.DLL' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'USER.EXE' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\WINDOWS\SYSTEM\x11drv.DLL' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'display' : builtin trace:loaddll:MODULE_LoadLibraryExA Loaded module 'C:\windows\system\comdlg32.dll' : builtin trace:loaddll:MODULE_LoadModule16 Loaded module 'commdlg.dll' : builtin And here is a short message from Gerard, regarding a trace I had sent him. Both traces are from running Wordview, where the first one came up ok and the second crashed (the behavior changed when run with these debug messages enabled): Here is what your app (actually, probably rpcrt4 for Win9x) is doing : Call kernel32.193: CreateFileMappingA(ffffffff,00000000,00000004,00000000,00000400,7fbd4a7c "rpcrt4sharedmem") ret=7fb9177b fs=008f Ret kernel32.193: CreateFileMappingA() retval=00000048 ret=7fb9177b fs=008f Call kernel32.419: GetLastError() ret=7fb9178e fs=008f Ret kernel32.419: GetLastError() retval=00000000 ret=7fb9178e fs=008f Call kernel32.632: MapViewOfFile(00000048,00000002,00000000,00000000,00000000) ret=7fb917ac fs=008f Ret kernel32.632: MapViewOfFile() retval=40349000 ret=7fb917ac fs=008f Call kernel32.553: HeapCreate(04000000,00001000,00000000) ret=7fb95c0f fs=008f Ret kernel32.553: HeapCreate() retval=65430000 ret=7fb95c0f fs=008f Call kernel32.551: HeapAlloc(65430000,00000000,00000040) ret=7fb95bf9 fs=008f Ret kernel32.551: HeapAlloc() retval=6543009c ret=7fb95bf9 fs=008f So, we have created a shared memory area and allocated memory at 65430000 Now here is what the next process is doing : Call kernel32.193: CreateFileMappingA(ffffffff,00000000,00000004,00000000,00000400,7fbd4a7c "rpcrt4sharedmem") ret=7fb9177b fs=008f Ret kernel32.193: CreateFileMappingA() retval=00000048 ret=7fb9177b fs=008f Call kernel32.419: GetLastError() ret=7fb9178e fs=008f Ret kernel32.419: GetLastError() retval=000000b7 ret=7fb9178e fs=008f Call kernel32.632: MapViewOfFile(00000048,00000002,00000000,00000000,00000000) ret=7fb917ac fs=008f Ret kernel32.632: MapViewOfFile() retval=40349000 ret=7fb917ac fs=008f Call kernel32.380: GetCurrentProcessId() ret=7fb95d5b fs=008f Ret kernel32.380: GetCurrentProcessId() retval=0808e1b8 ret=7fb95d5b fs=008f Call user32.422: MessageBoxA(00000000,40474ae0 "Unhandled page fault on read access to 0x654300b0 We have opened the shared memory (this is working since GetLastError returns that the file already exists : 000000b7), and tried to access data at 0x654300b0. This is failing it seems (you could try to run with -debugmsg +seh to confirm that an exception is occuring there) Note that the second process has allocated *no memory* at this place; from where is coming this 654300b0 value ? I guess from the shared memory. Duane

1 0

Re: Speeding up wineserver syncronization objects with shared memory
by David Howells Feb. 28, 2001

Feb. 28, 2001

I've got a lot of the wine support kernel module written now. Its system call latency seems to be down at near half that of Win2000 for mutexes, though there's no guarantee that my benchmark programs produce meaningful numbers. I've also got PE Image mapping done (with pages fixed up on demand and marked as discardable). So if anything, Wine might want to steal that if the module as a whole is not used. This bit requires virtually no changes to the kernel itself, just half a dozen or so extra symbols to be exported. The module image size stands currently at about 30K. Status: PART STATE ====================================== ========================== General object infrastructure done HANDLE infrastructure mostly done Waiting calls partly done Exception handling not done Win32 error handling not done, uses UNIX errno UNICODE handling ignored, all ASCII Security handling ignored Mutex objects done Semaphore objects done Event objects done File objects (synchronous access) mostly done File objects (asynchronous access) not done Shared memory objects mostly done Process objects slightly done Thread objects slightly done Registry objects not done NT Port objects not done NT Token objects not done W2K Job objects not done Net Communications not done userspace access library up to date strace mostly up to date Cheers, David

1 0

PostScript driver demand loading
by Ian Pilcher Feb. 27, 2001

Feb. 27, 2001

The attached patch removes the explicit load of the PostScript driver from MAIN_GdiInit. Instead, when a function calls DRIVER_FindDriver to get a drivers DC_FUNCTIONS, DRIVER_FindDriver will attempt to load a named driver if it hasn't already registered itself. This appears to work for printing from Lotus Notes. I'd appreciate some feedback from people using other applications, however. Also, any thoughts on the approach in general would be welcome. Thanks! -- ======================================================================== Ian Pilcher pilcher(a)concentric.net ======================================================================== --- ../wine-20010226cvs/graphics/driver.c Mon Nov 27 17:54:29 2000 +++ graphics/driver.c Tue Feb 27 18:34:08 2001 @@ -54,15 +54,25 @@ */ const DC_FUNCTIONS *DRIVER_FindDriver( LPCSTR name ) { - GRAPHICS_DRIVER *driver = firstDriver; + GRAPHICS_DRIVER *driver; + HINSTANCE hDriver; TRACE(": %s\n", name); - while (driver && name) - { + + if (!name) return genericDriver ? genericDriver->funcs : NULL; + + for (driver = firstDriver; driver; driver = driver->next) if (!strcasecmp( driver->name, name )) return driver->funcs; - driver = driver->next; - } - return genericDriver ? genericDriver->funcs : NULL; + + if (!(hDriver = LoadLibraryA (name))) return NULL; + + for (driver = firstDriver; driver; driver = driver->next) + if (!strcasecmp( driver->name, name )) return driver->funcs; + + if (!FreeLibrary (hDriver)) + WARN ("FreeLibrary failed with code %li\n", GetLastError ()); + + return NULL; } --- ../wine-20010226cvs/dlls/gdi/gdi_main.c Fri Jan 26 14:43:43 2001 +++ dlls/gdi/gdi_main.c Tue Feb 27 18:19:44 2001 @@ -24,9 +24,6 @@ /* Create the Win16 printer driver */ if (!WIN16DRV_Init()) return FALSE; - /* PSDRV initialization */ - if (!LoadLibraryA( "wineps" )) return FALSE; - return TRUE; }

1 0

Re: winspool.drv initialization problem
by Alexandre Julliard Feb. 27, 2001

Feb. 27, 2001

Ian Pilcher <pilcher(a)concentric.net> writes: > I've gotten my modified version of the PostScript driver to load, but it > seems to causing/exposing another problem. > > WINPROC_GetPtr is being called befor WINPROC_Init during Wine > initialization. The call to WINPROC_GetPtr results from a call to > LoadLibraryExA ("COMCTL32.DLL" ...); here is the stack: Sounds like importing winspool.drv in wineps creates a circular load dependency (user32->gdi32->wineps->winspool->comctl32->user32). We could probably be a bit more clever about loading wineps only when really necessary; OTOH there is no reason for winspool.drv to require comctl32. Something like this should fix it (completely untested, so it's probably broken): Index: dlls/winspool/info.c =================================================================== RCS file: /opt/cvs-commit/wine/dlls/winspool/info.c,v retrieving revision 1.33 diff -u -r1.33 info.c --- dlls/winspool/info.c 2001/02/21 04:00:40 1.33 +++ dlls/winspool/info.c 2001/02/26 23:01:57 @@ -20,23 +20,12 @@ #include "wine/unicode.h" #include "debugtools.h" #include "heap.h" -#include "commctrl.h" #include "winnls.h" DEFAULT_DEBUG_CHANNEL(winspool); -typedef struct _OPENEDPRINTER -{ - LPWSTR lpsPrinterName; - HANDLE hPrinter; -} OPENEDPRINTER, *LPOPENEDPRINTER; - -/* The OpenedPrinter Table dynamic array */ -static HDPA pOpenedPrinterDPA = NULL; - -extern HDPA WINAPI (*WINSPOOL_DPA_CreateEx) (INT, HANDLE); -extern LPVOID WINAPI (*WINSPOOL_DPA_GetPtr) (const HDPA, INT); -extern INT WINAPI (*WINSPOOL_DPA_InsertPtr) (const HDPA, INT, LPVOID); +static LPWSTR *printer_array; +static int nb_printers; static DWORD WINAPI (*GDI_CallDeviceCapabilities16)( LPCSTR lpszDevice, LPCSTR lpszPort, WORD fwCapability, LPSTR lpszOutput, @@ -84,73 +73,42 @@ * WINSPOOL_GetOpenedPrinterEntry * Get the first place empty in the opened printer table */ -static LPOPENEDPRINTER WINSPOOL_GetOpenedPrinterEntry() +static HANDLE WINSPOOL_GetOpenedPrinterEntry( LPCWSTR name ) { int i; - LPOPENEDPRINTER pOpenedPrinter; - /* - * Create the opened printers' handle dynamic array. - */ - if (!pOpenedPrinterDPA) - { - pOpenedPrinterDPA = WINSPOOL_DPA_CreateEx(10, GetProcessHeap()); - for (i = 0; i < 10; i++) - { - pOpenedPrinter = HeapAlloc(GetProcessHeap(), - HEAP_ZERO_MEMORY, - sizeof(OPENEDPRINTER)); - pOpenedPrinter->hPrinter = -1; - WINSPOOL_DPA_InsertPtr(pOpenedPrinterDPA, i, pOpenedPrinter); - } - } + for (i = 0; i < nb_printers; i++) if (!printer_array[i]) break; - /* - * Search for a handle not yet allocated. - */ - for (i = 0; i < pOpenedPrinterDPA->nItemCount; i++) + if (i >= nb_printers) { - pOpenedPrinter = WINSPOOL_DPA_GetPtr(pOpenedPrinterDPA, i); - - if (pOpenedPrinter->hPrinter == -1) - { - pOpenedPrinter->hPrinter = i + 1; - return pOpenedPrinter; - } + LPWSTR *new_array = HeapReAlloc( GetProcessHeap(), 0, printer_array, + (nb_printers + 16) * sizeof(*new_array) ); + if (!new_array) return 0; + printer_array = new_array; + nb_printers += 16; } - /* - * Didn't find one, insert new element in the array. - */ - if (i == pOpenedPrinterDPA->nItemCount) + if ((printer_array[i] = HeapAlloc( GetProcessHeap(), 0, (strlenW(name)+1)*sizeof(WCHAR) ))) { - pOpenedPrinter = HeapAlloc(GetProcessHeap(), - HEAP_ZERO_MEMORY, - sizeof(OPENEDPRINTER)); - pOpenedPrinter->hPrinter = i + 1; - WINSPOOL_DPA_InsertPtr(pOpenedPrinterDPA, i, pOpenedPrinter); - return pOpenedPrinter; + strcpyW( printer_array[i], name ); + return (HANDLE)(i + 1); } - - return NULL; + return 0; } /****************************************************************** * WINSPOOL_GetOpenedPrinter * Get the pointer to the opened printer referred by the handle */ -static LPOPENEDPRINTER WINSPOOL_GetOpenedPrinter(int printerHandle) +static LPCWSTR WINSPOOL_GetOpenedPrinter(HANDLE printerHandle) { - LPOPENEDPRINTER pOpenedPrinter; - - if(!pOpenedPrinterDPA) return NULL; - if((printerHandle <=0) || - (printerHandle > (pOpenedPrinterDPA->nItemCount - 1))) + int idx = (int)printerHandle; + if ((idx <= 0) || (idx > nb_printers)) + { + SetLastError(ERROR_INVALID_HANDLE); return NULL; - - pOpenedPrinter = WINSPOOL_DPA_GetPtr(pOpenedPrinterDPA, printerHandle-1); - - return pOpenedPrinter; + } + return printer_array[idx - 1]; } /****************************************************************** @@ -159,21 +117,20 @@ */ static DWORD WINSPOOL_GetOpenedPrinterRegKey(HANDLE hPrinter, HKEY *phkey) { - LPOPENEDPRINTER lpOpenedPrinter = WINSPOOL_GetOpenedPrinter(hPrinter); + LPCWSTR name = WINSPOOL_GetOpenedPrinter(hPrinter); DWORD ret; HKEY hkeyPrinters; - if(!lpOpenedPrinter) - return ERROR_INVALID_HANDLE; + if(!name) return ERROR_INVALID_HANDLE; if((ret = RegCreateKeyA(HKEY_LOCAL_MACHINE, Printers, &hkeyPrinters)) != ERROR_SUCCESS) return ret; - if(RegOpenKeyW(hkeyPrinters, lpOpenedPrinter->lpsPrinterName, phkey) - != ERROR_SUCCESS) { + if(RegOpenKeyW(hkeyPrinters, name, phkey) != ERROR_SUCCESS) + { ERR("Can't find opened printer %s in registry\n", - debugstr_w(lpOpenedPrinter->lpsPrinterName)); + debugstr_w(name)); RegCloseKey(hkeyPrinters); return ERROR_INVALID_PRINTER_NAME; /* ? */ } @@ -408,7 +365,6 @@ LPSTR pDeviceName, LPDEVMODEA pDevModeOutput, LPDEVMODEA pDevModeInput,DWORD fMode ) { - LPOPENEDPRINTER lpOpenedPrinter; LPSTR lpName = pDeviceName; LONG ret; @@ -417,13 +373,8 @@ ); if(!pDeviceName) { - LPWSTR lpNameW; - lpOpenedPrinter = WINSPOOL_GetOpenedPrinter(hPrinter); - if(!lpOpenedPrinter) { - SetLastError(ERROR_INVALID_HANDLE); - return -1; - } - lpNameW = lpOpenedPrinter->lpsPrinterName; + LPCWSTR lpNameW = WINSPOOL_GetOpenedPrinter(hPrinter); + if(!lpNameW) return -1; lpName = HEAP_strdupWtoA(GetProcessHeap(),0,lpNameW); } @@ -512,7 +463,6 @@ BOOL WINAPI OpenPrinterW(LPWSTR lpPrinterName,HANDLE *phPrinter, LPPRINTER_DEFAULTSW pDefault) { - LPOPENEDPRINTER lpOpenedPrinter; HKEY hkeyPrinters, hkeyPrinter; if (!lpPrinterName) { @@ -545,21 +495,8 @@ if(!phPrinter) /* This seems to be what win95 does anyway */ return TRUE; - /* Get a place in the opened printer buffer*/ - lpOpenedPrinter = WINSPOOL_GetOpenedPrinterEntry(); - if(!lpOpenedPrinter) { - ERR("Can't allocate printer slot\n"); - SetLastError(ERROR_OUTOFMEMORY); - return FALSE; - } - - /* Get the name of the printer */ - lpOpenedPrinter->lpsPrinterName = HeapAlloc( GetProcessHeap(), 0, - (strlenW(lpPrinterName)+1)*sizeof(WCHAR) ); - strcpyW( lpOpenedPrinter->lpsPrinterName, lpPrinterName ); - /* Get the unique handle of the printer*/ - *phPrinter = lpOpenedPrinter->hPrinter; + *phPrinter = WINSPOOL_GetOpenedPrinterEntry( lpPrinterName ); if (pDefault != NULL) FIXME("Not handling pDefault\n"); @@ -915,23 +852,14 @@ */ BOOL WINAPI ClosePrinter(HANDLE hPrinter) { - LPOPENEDPRINTER lpOpenedPrinter; + int i = (int)hPrinter; TRACE("Handle %d\n", hPrinter); - - if (!pOpenedPrinterDPA) - return FALSE; - if ((hPrinter != -1) && (hPrinter < (pOpenedPrinterDPA->nItemCount - 1))) - { - lpOpenedPrinter = WINSPOOL_GetOpenedPrinter(hPrinter); - HeapFree(GetProcessHeap(), 0, lpOpenedPrinter->lpsPrinterName); - lpOpenedPrinter->lpsPrinterName = NULL; - lpOpenedPrinter->hPrinter = -1; - - return TRUE; - } - return FALSE; + if ((i <= 0) || (i > nb_printers)) return FALSE; + HeapFree( GetProcessHeap(), 0, printer_array[i - 1] ); + printer_array[i - 1] = NULL; + return TRUE; } /***************************************************************************** @@ -957,15 +885,10 @@ */ BOOL WINAPI DeletePrinter(HANDLE hPrinter) { - LPWSTR lpNameW; + LPCWSTR lpNameW = WINSPOOL_GetOpenedPrinter(hPrinter); HKEY hkeyPrinters; - LPOPENEDPRINTER lpOpenedPrinter = WINSPOOL_GetOpenedPrinter(hPrinter); - if(!lpOpenedPrinter) { - SetLastError(ERROR_INVALID_HANDLE); - return FALSE; - } - lpNameW = lpOpenedPrinter->lpsPrinterName; + if(!lpNameW) return FALSE; if(RegOpenKeyA(HKEY_LOCAL_MACHINE, Printers, &hkeyPrinters) != ERROR_SUCCESS) { ERR("Can't open Printers key\n"); @@ -1410,7 +1333,7 @@ static BOOL WINSPOOL_GetPrinter(HANDLE hPrinter, DWORD Level, LPBYTE pPrinter, DWORD cbBuf, LPDWORD pcbNeeded, BOOL unicode) { - OPENEDPRINTER *lpOpenedPrinter; + LPCWSTR name; DWORD size, needed = 0; LPBYTE ptr = NULL; HKEY hkeyPrinter, hkeyPrinters; @@ -1418,20 +1341,16 @@ TRACE("(%d,%ld,%p,%ld,%p)\n",hPrinter,Level,pPrinter,cbBuf, pcbNeeded); - lpOpenedPrinter = WINSPOOL_GetOpenedPrinter(hPrinter); - if(!lpOpenedPrinter) { - SetLastError(ERROR_INVALID_HANDLE); - return FALSE; - } + if (!(name = WINSPOOL_GetOpenedPrinter(hPrinter))) return FALSE; + if(RegCreateKeyA(HKEY_LOCAL_MACHINE, Printers, &hkeyPrinters) != ERROR_SUCCESS) { ERR("Can't create Printers key\n"); return FALSE; } - if(RegOpenKeyW(hkeyPrinters, lpOpenedPrinter->lpsPrinterName, &hkeyPrinter) - != ERROR_SUCCESS) { - ERR("Can't find opened printer %s in registry\n", - debugstr_w(lpOpenedPrinter->lpsPrinterName)); + if(RegOpenKeyW(hkeyPrinters, name, &hkeyPrinter) != ERROR_SUCCESS) + { + ERR("Can't find opened printer %s in registry\n", debugstr_w(name)); RegCloseKey(hkeyPrinters); SetLastError(ERROR_INVALID_PRINTER_NAME); /* ? */ return FALSE; @@ -1933,7 +1852,7 @@ DWORD cbBuf, LPDWORD pcbNeeded, BOOL unicode) { - OPENEDPRINTER *lpOpenedPrinter; + LPCWSTR name; WCHAR DriverName[100]; DWORD ret, type, size, needed = 0; LPBYTE ptr = NULL; @@ -1944,11 +1863,8 @@ ZeroMemory(pDriverInfo, cbBuf); - lpOpenedPrinter = WINSPOOL_GetOpenedPrinter(hPrinter); - if(!lpOpenedPrinter) { - SetLastError(ERROR_INVALID_HANDLE); - return FALSE; - } + if (!(name = WINSPOOL_GetOpenedPrinter(hPrinter))) return FALSE; + if(Level < 1 || Level > 3) { SetLastError(ERROR_INVALID_LEVEL); return FALSE; @@ -1958,10 +1874,9 @@ ERR("Can't create Printers key\n"); return FALSE; } - if(RegOpenKeyW(hkeyPrinters, lpOpenedPrinter->lpsPrinterName, &hkeyPrinter) + if(RegOpenKeyW(hkeyPrinters, name, &hkeyPrinter) != ERROR_SUCCESS) { - ERR("Can't find opened printer %s in registry\n", - debugstr_w(lpOpenedPrinter->lpsPrinterName)); + ERR("Can't find opened printer %s in registry\n", debugstr_w(name)); RegCloseKey(hkeyPrinters); SetLastError(ERROR_INVALID_PRINTER_NAME); /* ? */ return FALSE; @@ -1972,8 +1887,7 @@ RegCloseKey(hkeyPrinter); RegCloseKey(hkeyPrinters); if(ret != ERROR_SUCCESS) { - ERR("Can't get DriverName for printer %s\n", - debugstr_w(lpOpenedPrinter->lpsPrinterName)); + ERR("Can't get DriverName for printer %s\n", debugstr_w(name)); return FALSE; } Index: dlls/winspool/wspool.c =================================================================== RCS file: /opt/cvs-commit/wine/dlls/winspool/wspool.c,v retrieving revision 1.3 diff -u -r1.3 wspool.c --- dlls/winspool/wspool.c 2001/02/12 03:51:05 1.3 +++ dlls/winspool/wspool.c 2001/02/26 23:01:57 @@ -5,15 +5,10 @@ * Copyright 1999 Thuy Nguyen */ -#include "commctrl.h" #include "debugtools.h" DEFAULT_DEBUG_CHANNEL(winspool); -HINSTANCE hcomctl32 = 0; -HDPA WINAPI (*WINSPOOL_DPA_CreateEx)(INT, HANDLE); -LPVOID WINAPI (*WINSPOOL_DPA_GetPtr)(const HDPA, INT); -INT WINAPI (*WINSPOOL_DPA_InsertPtr)(const HDPA, INT, LPVOID); /****************************************************************************** * WINSPOOL_EntryPoint @@ -28,16 +23,9 @@ switch (reason) { case DLL_PROCESS_ATTACH: - - hcomctl32 = LoadLibraryA("COMCTL32.DLL"); - - WINSPOOL_DPA_CreateEx = (void*)GetProcAddress(hcomctl32, (LPCSTR)340L); - WINSPOOL_DPA_GetPtr = (void*)GetProcAddress(hcomctl32, (LPCSTR)332L); - WINSPOOL_DPA_InsertPtr = (void*)GetProcAddress(hcomctl32, (LPCSTR)334L); break; case DLL_PROCESS_DETACH: - FreeLibrary(hcomctl32); break; } -- Alexandre Julliard julliard(a)winehq.com

3 3

winspool.drv initialization problem
by Ian Pilcher Feb. 26, 2001

Feb. 26, 2001

The saga continues! I've gotten my modified version of the PostScript driver to load, but it seems to causing/exposing another problem. WINPROC_GetPtr is being called befor WINPROC_Init during Wine initialization. The call to WINPROC_GetPtr results from a call to LoadLibraryExA ("COMCTL32.DLL" ...); here is the stack: #0 HEAP_GetPtr (heap=0) at heap.c:217 #1 0x40093514 in HeapValidate (heap=0, flags=0, block=0x408ffc67) at heap.c:1508 #2 0x4081c93f in WINPROC_GetPtr () from /usr/lib/wine/libuser32.so #3 0x4081cbaa in WINPROC_SetProc () from /usr/lib/wine/libuser32.so #4 0x407e280d in RegisterClassA () from /usr/lib/wine/libuser32.so #5 0x40900058 in ANIMATE_Register () from /usr/lib/wine/libcomctl32.so #6 0x40906412 in COMCTL32_LibMain () from /usr/lib/wine/libcomctl32.so #7 0x400814e8 in PE_InitDLL () from /usr/lib/wine/libntdll.so #8 0x4007d0f9 in MODULE_InitDLL () from /usr/lib/wine/libntdll.so #9 0x4007d216 in MODULE_DllProcessAttach () from /usr/lib/wine/libntdll.so #10 0x4007f364 in LoadLibraryExA () from /usr/lib/wine/libntdll.so #11 0x4007f916 in LoadLibraryA () from /usr/lib/wine/libntdll.so #12 0x40975772 in WINSPOOL_EntryPoint () from /usr/lib/wine/libwinspool.drv.so #13 0x400814e8 in PE_InitDLL () from /usr/lib/wine/libntdll.so #14 0x4007d0f9 in MODULE_InitDLL () from /usr/lib/wine/libntdll.so #15 0x4007d216 in MODULE_DllProcessAttach () from /usr/lib/wine/libntdll.so #16 0x4007d1f0 in MODULE_DllProcessAttach () from /usr/lib/wine/libntdll.so #17 0x4007f364 in LoadLibraryExA () from /usr/lib/wine/libntdll.so #18 0x4007f916 in LoadLibraryA () from /usr/lib/wine/libntdll.so #19 0x4087206b in MAIN_GdiInit () from /usr/lib/wine/libgdi32.so #20 0x400814e8 in PE_InitDLL () from /usr/lib/wine/libntdll.so #21 0x4007d0f9 in MODULE_InitDLL () from /usr/lib/wine/libntdll.so #22 0x4007d216 in MODULE_DllProcessAttach () from /usr/lib/wine/libntdll.so #23 0x4007d1f0 in MODULE_DllProcessAttach () from /usr/lib/wine/libntdll.so #24 0x4007d1f0 in MODULE_DllProcessAttach () from /usr/lib/wine/libntdll.so #25 0x4007d1f0 in MODULE_DllProcessAttach () from /usr/lib/wine/libntdll.so #26 0x4007d1f0 in MODULE_DllProcessAttach () from /usr/lib/wine/libntdll.so #27 0x4007d1f0 in MODULE_DllProcessAttach () from /usr/lib/wine/libntdll.so #28 0x400c758c in start_process () from /usr/lib/wine/libntdll.so #29 0x400caeed in SYSDEPS_DoCallOnStack () from /usr/lib/wine/libntdll.so #30 0x400caf97 in SYSDEPS_CallOnStack () from /usr/lib/wine/libntdll.so #31 0x400cb03a in SYSDEPS_SwitchToThreadStack () from /usr/lib/wine/libntdll.so #32 0x400c79d7 in PROCESS_InitWine () from /usr/lib/wine/libntdll.so #33 0x804b213 in main () #34 0x4027ff55 in __libc_start_main (main=0x804b1f8 <main>, argc=1, ubp_av=0xbffff9d4, init=0x8048728 <_init>, fini=0x804b25c <_fini>, rtld_fini=0x4000e3e4 <_dl_fini>, stack_end=0xbffff9cc) at ../sysdeps/generic/libc-start.c:129 This is way out of my depth! -- ======================================================================== Ian Pilcher pilcher(a)concentric.net ========================================================================

2 1

Re: undefined symbol: GetPrinterDataA
by Alexandre Julliard Feb. 26, 2001

Feb. 26, 2001

"Dimitrie O. Paun" <dimi(a)cs.toronto.edu> writes: > Would it be useful to create such a list, and maybe list > for each of the dlls in there, why there aren't separated yet? Here's a list of the undefined symbols that prevent separation of the remaining dlls (I didn't include user/gdi/kernel to avoid scaring people too much ;-) ./libddraw.so: undefined reference to `DIB_CreateDIBSection' ./libddraw.so: undefined reference to `DIB_GetDIBWidthBytes' ./libddraw.so: undefined reference to `PROFILE_GetWineIniBool' ./libddraw.so: undefined reference to `WIN_FindWndPtr' ./libddraw.so: undefined reference to `WIN_ReleaseWndPtr' ./libddraw.so: undefined reference to `X11DRV_WND_GetXWindow' ./libddraw.so: undefined reference to `display' ./libddraw.so: undefined reference to `root_window' ./libddraw.so: undefined reference to `visual' ./libopengl32.so: undefined reference to `DC_GetDCPtr' ./libopengl32.so: undefined reference to `GDI_ReleaseObj' ./libopengl32.so: undefined reference to `XFONT_GetFontObject' ./libopengl32.so: undefined reference to `display' ./libopengl32.so: undefined reference to `root_window' ./libopengl32.so: undefined reference to `visual' ./libdinput.so: undefined reference to `MOUSE_Enable' ./libdinput.so: undefined reference to `USER_Driver' ./libwinedos.so: undefined reference to `DOSMEM_Available' ./libwinedos.so: undefined reference to `DOSMEM_FreeBlock' ./libwinedos.so: undefined reference to `DOSMEM_GetBlock' ./libwinedos.so: undefined reference to `DOSMEM_Init' ./libwinedos.so: undefined reference to `DOSMEM_MapRealToLinear' ./libwinedos.so: undefined reference to `DOSMEM_wrap_seg' ./libwinedos.so: undefined reference to `EXC_RtlRaiseException' ./libwinedos.so: undefined reference to `FILE_GetUnixHandle' ./libwinedos.so: undefined reference to `INSTR_EmulateInstruction' ./libwinedos.so: undefined reference to `INT_GetRMHandler' ./libwinedos.so: undefined reference to `INT_Int09SendScan' ./libwinedos.so: undefined reference to `INT_Int33Message' ./libwinedos.so: undefined reference to `INT_RealModeInterrupt' ./libwinedos.so: undefined reference to `INT_SetRMHandler' ./libwinedos.so: undefined reference to `VGA_Clean' ./libwinedos.so: undefined reference to `_LeaveWin16Lock' ./libwinedos.so: undefined reference to `full_argv0' ./libwineps.so: undefined reference to `CloseJob16' ./libwineps.so: undefined reference to `DC_GetDCPtr' ./libwineps.so: undefined reference to `DIB_GetBitmapInfo' ./libwineps.so: undefined reference to `DIB_GetDIBWidthBytes' ./libwineps.so: undefined reference to `DRIVER_RegisterDriver' ./libwineps.so: undefined reference to `DRIVER_UnregisterDriver' ./libwineps.so: undefined reference to `DrvGetPrinterData16' ./libwineps.so: undefined reference to `DrvSetPrinterData16' ./libwineps.so: undefined reference to `GDI_GetObjPtr' ./libwineps.so: undefined reference to `GDI_ReleaseObj' ./libwineps.so: undefined reference to `OpenJob16' ./libwineps.so: undefined reference to `PROFILE_EnumWineIniString' ./libwineps.so: undefined reference to `PROFILE_GetWineIniString' ./libwineps.so: undefined reference to `SelectClipRgn16' ./libwineps.so: undefined reference to `WriteSpool16' ./libmcicda.drv.so: undefined reference to `CDROM_Close' ./libmcicda.drv.so: undefined reference to `CDROM_Audio_Stop' ./libmcicda.drv.so: undefined reference to `CDROM_Audio_GetCDStatus' ./libmcicda.drv.so: undefined reference to `CDROM_Audio_Play' ./libmcicda.drv.so: undefined reference to `CDROM_Audio_GetTracksInfo' ./libmcicda.drv.so: undefined reference to `CDROM_CloseDev' ./libmcicda.drv.so: undefined reference to `CDROM_OpenDev' ./libmcicda.drv.so: undefined reference to `CDROM_Audio_GetSerial' ./libmcicda.drv.so: undefined reference to `CDROM_Open' ./libmcicda.drv.so: undefined reference to `CDROM_Audio_GetNumberOfTracks' ./libmcicda.drv.so: undefined reference to `CDROM_Audio_Pause' ./libmcicda.drv.so: undefined reference to `CDROM_SetDoor' ./libmcicda.drv.so: undefined reference to `CDROM_Audio_Seek' ./libws2_32.so: undefined reference to `SERVICE_Delete' ./libws2_32.so: undefined reference to `SERVICE_AddObject' ./libws2_32.so: undefined reference to `FILE_GetUnixHandle' ./libx11drv.so: undefined reference to `BITMAP_Driver' ./libx11drv.so: undefined reference to `BITMAP_GetWidthBytes' ./libx11drv.so: undefined reference to `CLIPBOARD_DeleteRecord' ./libx11drv.so: undefined reference to `CLIPBOARD_EmptyCache' ./libx11drv.so: undefined reference to `CLIPBOARD_GetFormatName' ./libx11drv.so: undefined reference to `CLIPBOARD_IsPresent' ./libx11drv.so: undefined reference to `CLIPBOARD_LookupFormat' ./libx11drv.so: undefined reference to `CLIPBOARD_ReleaseOwner' ./libx11drv.so: undefined reference to `CLIPPING_IntersectVisRect' ./libx11drv.so: undefined reference to `COLOR_IsSolid' ./libx11drv.so: undefined reference to `COLOR_PaletteLookupExactIndex' ./libx11drv.so: undefined reference to `COLOR_PaletteLookupPixel' ./libx11drv.so: undefined reference to `COLOR_gapEnd' ./libx11drv.so: undefined reference to `COLOR_gapFilled' ./libx11drv.so: undefined reference to `COLOR_gapStart' ./libx11drv.so: undefined reference to `COLOR_max' ./libx11drv.so: undefined reference to `COLOR_sysPal' ./libx11drv.so: undefined reference to `COLOR_sysPalTemplate' ./libx11drv.so: undefined reference to `DCE_InvalidateDCE' ./libx11drv.so: undefined reference to `DC_GetDCPtr' ./libx11drv.so: undefined reference to `DC_InitDC' ./libx11drv.so: undefined reference to `DIB_BitmapInfoSize' ./libx11drv.so: undefined reference to `DIB_CreateDIBFromBitmap' ./libx11drv.so: undefined reference to `DIB_GetBitmapInfo' ./libx11drv.so: undefined reference to `DIB_GetDIBImageBytes' ./libx11drv.so: undefined reference to `DIB_GetDIBWidthBytes' ./libx11drv.so: undefined reference to `DRAG_QueryUpdate' ./libx11drv.so: undefined reference to `DRIVER_RegisterDriver' ./libx11drv.so: undefined reference to `DeleteObject16' ./libx11drv.so: undefined reference to `EVENT_Synchronize' ./libx11drv.so: undefined reference to `FILE_DupUnixHandle' ./libx11drv.so: undefined reference to `FONT_LogFontWTo16' ./libx11drv.so: undefined reference to `GDI_AllocObject' ./libx11drv.so: undefined reference to `GDI_GetObjPtr' ./libx11drv.so: undefined reference to `GDI_ReleaseObj' ./libx11drv.so: undefined reference to `GetClipboardData16' ./libx11drv.so: undefined reference to `InputKeyStateTable' ./libx11drv.so: undefined reference to `KEYBOARD_SendEvent' ./libx11drv.so: undefined reference to `NC_IconForWindow' ./libx11drv.so: undefined reference to `Options' ./libx11drv.so: undefined reference to `PALETTE_Driver' ./libx11drv.so: undefined reference to `PROFILE_GetStringItem' ./libx11drv.so: undefined reference to `PROFILE_GetWineIniBool' ./libx11drv.so: undefined reference to `PROFILE_GetWineIniInt' ./libx11drv.so: undefined reference to `PROFILE_GetWineIniString' ./libx11drv.so: undefined reference to `PostMessage16' ./libx11drv.so: undefined reference to `REGION_LPTODP' ./libx11drv.so: undefined reference to `RestoreVisRgn16' ./libx11drv.so: undefined reference to `SELECTOR_AllocBlock' ./libx11drv.so: undefined reference to `SELECTOR_FreeBlock' ./libx11drv.so: undefined reference to `SERVICE_AddObject' ./libx11drv.so: undefined reference to `SERVICE_AddTimer' ./libx11drv.so: undefined reference to `SaveVisRgn16' ./libx11drv.so: undefined reference to `SelectClipRgn16' ./libx11drv.so: undefined reference to `SelectVisRgn16' ./libx11drv.so: undefined reference to `TWEAK_WineLook' ./libx11drv.so: undefined reference to `VIRTUAL_SetFaultHandler' ./libx11drv.so: undefined reference to `WIN_FindWndPtr' ./libx11drv.so: undefined reference to `WIN_GetDesktop' ./libx11drv.so: undefined reference to `WIN_InternalShowOwnedPopups' ./libx11drv.so: undefined reference to `WIN_LinkWindow' ./libx11drv.so: undefined reference to `WIN_LockWndPtr' ./libx11drv.so: undefined reference to `WIN_ReleaseDesktop' ./libx11drv.so: undefined reference to `WIN_ReleaseWndPtr' ./libx11drv.so: undefined reference to `WIN_RestoreWndsLock' ./libx11drv.so: undefined reference to `WIN_SuspendWndsLock' ./libx11drv.so: undefined reference to `WIN_UnlinkWindow' ./libx11drv.so: undefined reference to `WIN_UpdateWndPtr' ./libx11drv.so: undefined reference to `WIN_WindowNeedsWMBorder' ./libx11drv.so: undefined reference to `WND_Driver' ./libx11drv.so: undefined reference to `argv0' ./libx11drv.so: undefined reference to `get_config_dir' ./libx11drv.so: undefined reference to `pKeyStateTable' ./libttydrv.so: undefined reference to `BITMAP_Driver' ./libttydrv.so: undefined reference to `COLOR_gapEnd' ./libttydrv.so: undefined reference to `COLOR_gapStart' ./libttydrv.so: undefined reference to `COLOR_sysPal' ./libttydrv.so: undefined reference to `COLOR_sysPalTemplate' ./libttydrv.so: undefined reference to `DC_GetDCPtr' ./libttydrv.so: undefined reference to `DRIVER_FindDriver' ./libttydrv.so: undefined reference to `DRIVER_RegisterDriver' ./libttydrv.so: undefined reference to `GDI_GetObjPtr' ./libttydrv.so: undefined reference to `GDI_ReleaseObj' ./libttydrv.so: undefined reference to `PALETTE_Driver' ./libttydrv.so: undefined reference to `WND_Driver' -- Alexandre Julliard julliard(a)winehq.com

1 0

Re: Speeding up wineserver synchronization objects with shared memory
by Alexandre Julliard Feb. 26, 2001

Feb. 26, 2001

"Robert O'Callahan" <roc+(a)cs.cmu.edu> writes: > So your concern is simply that if it's too simple to lock the mutex, then > you have an unacceptably high probability of a runaway process > accidentally locking the mutex, whereas you regard the probability of the > process accidentally calling AcquireMutex again (or executing the > protected control transfer on its own) as acceptably low. That seems > reasonable. No, that's not my concern. The probability of error doesn't matter at all, I don't mind if the process locks the mutex by accident. What must not be able to happen is that the process somehow corrupts the state as seen from the wineserver or other processes. That is, it doesn't matter if the process thinks it got the mutex when it didn't; but it must not be possible to make the wineserver see two processes holding the mutex, or some other inconsistent state. Any inconsistency must remain local to the process. > Yeah, but that doesn't seem fundamental --- the wineserver can always take > ownership of the mutex itself when it needs to do a complex atomic > operation. I'll let Gavriel work out the details :-). My point is that getting the details right is what is important; and if you are not interested in doing this, then there is no point in arguing any further. -- Alexandre Julliard julliard(a)winehq.com

1 0

undefined symbol: GetPrinterDataA
by Ian Pilcher Feb. 26, 2001

Feb. 26, 2001

I am trying to modify the Wine PostScript driver to use GetPrinterDataA to read configuration information from the registry. I have added a line that reads "import winspool.drv" to wineps.spec, and Wine builds with no errors. When I try to run Wine, however, I get the following error: BUILTIN32_dlopen failed to load .so lib for builtin wineps.dll: /usr/lib/wine/libwineps.so: undefined symbol: GetPrinterDataA Ideas? -- ======================================================================== Ian Pilcher pilcher(a)concentric.net ========================================================================

5 4

Re: Speeding up wineserver synchronization objects with shared memory
by Alexandre Julliard Feb. 26, 2001

Feb. 26, 2001

"Robert O'Callahan" <roc+(a)cs.cmu.edu> writes: > Of course it has to be 100% reliable, but since you're dealing with > failing processes it's not 100% clear what 100% reliability is. Anyway, I > think 100% reliability is possible for any plausible definition. For a mutex the basic definition is obviously that you can never have two threads holding the mutex at the same time, and that when it is released some other thread has a chance at grabbing it. This has to be true no matter what the process does, including corrupting memory or crashing. You also need to make sure nothing a process does should be able to crash/hang the wineserver or another process (except if they fight over the same mutex of course), and then there is the small matter of respecting the Win32 semantics... Actually it is the last constraint that is the main problem. You can certainly provide some kind of mutexes using shared memory; but we don't need just 'some kind', we need Win32 mutexes. This means a mutex is identified by a handle that can be manipulated by CloseHandle or DuplicateHandle; it means you need to detect and handle abandoned mutexes; it means you must support WaitForMultipleObjects, including the 'all' case where you cannot grab the mutex unless all objects are signaled; all things that I didn't see in your implementation ;-) -- Alexandre Julliard julliard(a)winehq.com

2 1

Re: undefined symbol: GetPrinterDataA
by gerard patel Feb. 26, 2001

Feb. 26, 2001

At 08:30 PM 25/02/2001 +0600, you wrote: >I am trying to modify the Wine PostScript driver to use GetPrinterDataA >to read configuration information from the registry. I have added a >line that reads "import winspool.drv" to wineps.spec, and Wine builds >with no errors. When I try to run Wine, however, I get the following >error: > > BUILTIN32_dlopen failed to load .so lib for builtin wineps.dll: > /usr/lib/wine/libwineps.so: undefined symbol: GetPrinterDataA Note the differences between the Makefile for common dialog (where this works) and the Makefile for wineps : commdlg : # Generated automatically from Makefile.in by configure. TOPSRCDIR = ../.. TOPOBJDIR = ../.. SRCDIR = . MODULE = comdlg32 ALTNAMES = commdlg EXTRALIBS = $(LIBUUID) LDDLLFLAGS = -Wl,-Bsymbolic SYMBOLFILE = $(MODULE).tmp.o (...) wineps : # Generated automatically from Makefile.in by configure. TOPSRCDIR = ../.. TOPOBJDIR = ../.. SRCDIR = . MODULE = wineps SOVERSION = 1.0 ALTNAMES = wineps16 IMPORTS = user32 gdi32 kernel32 ntdll C_SRCS = \ (...) I think that the mechanism is not working because dlls separation is not done for wineps ;-) Gerard

1 0

Re: undefined symbol: GetPrinterDataA
by Ian Pilcher Feb. 26, 2001

Feb. 26, 2001

lawson_whitney(a)juno.com wrote: > > I think maybe you have created a new dependency and need to run make > depend again? If I understand the import mechanism, something > (winebuild?) generates stubs for the functions you import and ties them > in to the import mechanism, so they shouldn't be left hanging for ld.so > to choke on. They should resolve to .spec.o. It looks to me as if the > .spec didin't get rebuilt. > If only it were that simple. I've rebuilt from scratch, with a clean source tree. -- ======================================================================== Ian Pilcher pilcher(a)concentric.net ========================================================================

2 3

Re: various config files for various applications
by Alexandre Julliard Feb. 26, 2001

Feb. 26, 2001

Martin Pilka <mpilka(a)codeweavers.com> writes: > another way could be have some additional (let's say > ~/.wine/app-config/1database.txt) file which will contain <regular > expression> --> <filename> mappings. that way wine have to open (and > read) only that file, and we're able to do that pretty fast (as i found > out when worked on registry patch). however, it has to evaluate all the > reg. expressions at runtime, but that is linear dependency. > > hmm, i don't know now. first letter or an additional file? This is getting way too complex IMO. I think having everything in the .wine/config file is much more reasonable; most people don't need that many different configurations anyway. What we should do is take advantage of the new config file format to create a deeper configuration hierarchy. So for instance the default x11drv config is under the registry key Wine\Config\x11drv, but we could create subtrees like Wine\Config\AppDefaults\Solitaire\x11drv which would contain the Solitaire-specific config values. This is then very fast to lookup, just try AppDefaults\<current module> and if not found fall back to the current method. I don't think we need regular expressions at all. -- Alexandre Julliard julliard(a)winehq.com

3 2

Re: Re: undefined symbol: GetPrinterDataA
by Eric Pouech Feb. 26, 2001

Feb. 26, 2001

>wineps : > ># Generated automatically from Makefile.in by configure. >TOPSRCDIR = ../.. >TOPOBJDIR = ../.. >SRCDIR = . >MODULE = wineps >SOVERSION = 1.0 >ALTNAMES = wineps16 >IMPORTS = user32 gdi32 kernel32 ntdll in this case, just add winspool.drv to the IMPORT list in the Makefile.in, rerun configure, and it should work. (If Alexandre didn't convert the Makefile.in for dll separation, there should be some good reasons... like using non exported symbols... which would require much more work) A+ --------------- Eric Pouech (http://perso.wanadoo.fr/eric.pouech/) "The future will be better tomorrow", Vice President Dan Quayle

2 1

Re: Speeding up wineserver synchronization objects with shared memory
by Alexandre Julliard Feb. 26, 2001

Feb. 26, 2001

Gavriel State <gav(a)transgaming.com> writes: > Even without that approach though, I don't think that the new failure mode > is really likely to be that big a deal. If process A owns a mutex that process > B wants, they quite likely have some functional interdependance which would be > disrupted as much by any generic hang in process A as by a hang followed by > a failure to release the mutex. Imagine a process that does a SuspendThread() on one of its threads, but makes sure by some kind of internal protocol that the thread is never holding the mutex when it is suspended. This would work just fine under Windows or under the wineserver, but would fail with the shared memory approach. There is simply no point in implementing a mutex that works only 99% of the time, no matter how fast it is. The synchronization objects have to be 100% reliable, performance only comes next; and none of the shared memory approaches I've seen so far are 100% reliable. In fact the original implementation of the kernel objects was based on shared memory and signals. A lot of time was spent trying to make this work right, but it was simply not possible without assuming that all processes will always follow the protocol correctly, which is clearly not something we can assume when running arbitrary Windows code. -- Alexandre Julliard julliard(a)winehq.com

2 1

Re: Speeding up wineserver synchronization objects with shared memory
by Michael McCormack Feb. 26, 2001

Feb. 26, 2001

Two things: 1. How about expiring client's unix file descriptors by having wineserver writing a single non-zero byte[*] to the server-communication socket when another client modifies the fd? The code to validate fds before use could then be reduced from a server call to a single nonwaiting poll on NtCurrentTeb()->reply_fd. 2. How about using pipes to implement critical sections? InitCriticalSection would create a pipe and write one byte, EnterCritical section would do a poll on the pipe, followed by a read of one byte, and leave critical section would write one byte back to the pipe. [*] wineserver would write a zero byte when it wished to restart a client after a server call, and the client would need to check this. Mike -- __________________________________________________________________ mailto:Michael.McCormack(a)alcatel.com.au phone: (+82 11 430 0425)

1 0

Re: Speeding up wineserver synchronization objects with shared memory
by Michael McCormack Feb. 26, 2001

Feb. 26, 2001

Two things: 1. How about expiring client's unix file descriptors by having wineserver writing a single non-zero byte[*] to the server-communication socket when another client modifies the fd? The code to validate fds before use could then be reduced from a server call to a single nonwaiting poll on NtCurrentTeb()->reply_fd. 2. How about using pipes to implement critical sections? InitCriticalSection would create a pipe and write one byte, EnterCritical section would do a poll on the pipe, followed by a read of one byte, and leave critical section would write one byte back to the pipe. [*] wineserver would write a zero byte when it wished to restart a client after a server call, and the client would need to check this. Mike -- __________________________________________________________________ mailto:Michael.McCormack(a)alcatel.com.au phone: (+612) 9690 5305

1 0

Re: [PATCH] 16 bits print dialog
by Dmitry Timoshkov Feb. 25, 2001

Feb. 25, 2001

"gerard patel" <gerard.patel(a)asi.fr> wrote: > As it's rather unlikely anyone will craft 16 bits specific resources now, I have > mapped the 32 bits resource into 16 bit ones > I did not test if 16 bits printing still works, but the print dialog box displays again > at least. > There is also a minor fix to cast the return value for the 16 bits hook to 16 bits. > > ChangeLog: > > * dlls/commdlg/printdlg.c > maps 32 bits resource for 16 bits print dialog. Gerard, your patch is fine, but I have one tiny comment: in Win32 hInstance and hModule are the same thing, unlike in Win16. So, instead of GetModuleHandleA("COMDLG32") you can safely use COMMDLG_hInstance32.

1 0

Re: Speeding up wineserver synchronization objects with shared memory
by Robert O'Callahan Feb. 25, 2001

Feb. 25, 2001

I was just reading WWN and saw this discussion. Here's a wacky idea that might or might not work. The basic idea is to grant ownership of each mutex to one Win32 process at a time. Let any thread grab the mutex quickly if it belongs to the process that owns the mutex. If its process does not own the mutex, then it must communicate with the wineserver and the wineserver must communicate with the owning process to transfer ownership of the mutex from the current owner to the requesting thread. Here's how to implement it. For each Win32 process, for each mutex that's been mapped into it using DuplicateHandle or whatever, allocate a standard shared-memory-based critical section, along with a weOwnIt flag that indicates whether we own the mutex or not. Processes that don't own the mutex leave their critical sections locked. Then implement the operations as follows: AcquireMutex { retry: TryToEnterCriticalSection(); // nonblocking if (failed) { if (!weOwnIt) { wineserver->GiveUsOwnership(); // blocking goto retry; } else { EnterCriticalSection(); // blocking } } } ReleaseMutex { LeaveCriticalSection(); } Then on some other thread in the same address space that serves wineserver requests: WineserverGrantsUsOwnership { weOwnIt = true; LeaveCriticalSection(); } WineserverWantsToTakeAwayOwnership { EnterCriticalSection(); weOwnIt = false; wineserver->WeHaveGivenUpOwnership(); } Because the ownership test in AcquireMutex can race, the server needs to ignore GiveUsOwnership requests for processes that already own the mutex. It seems like this will be efficient (a lot more efficient than a kernel call actually) unless the mutex is pingponging between processes, in which case you'll be eating lots of context switches anyway. In terms of safety, a correctly functioning process will never complete AcquireMutex unless the wineserver has granted it the mutex. A misbehaving process can hold the mutex indefinitely or incorrectly think it has the mutex, but of course that's true under any scheme. When the wineserver terminates a process, it can reassign mutex ownership. (So if a process is asked to give up the mutex but doesn't, the wineserver can time out, kill the process and grant the mutex to someone else). Rob

4 6

Printer setup dialog enhancement
by Duane Clark Feb. 24, 2001

Feb. 24, 2001

Howdy, Since the landscape/portrait icons were added to the printer setup dialog a couple weeks ago, here is a minor patch so that the landscape/portrait radio buttons cause an immediate change of the icon. Duane Index: dlls/commdlg/printdlg.c =================================================================== RCS file: /home/wine/wine/dlls/commdlg/printdlg.c,v retrieving revision 1.37 diff -u -r1.37 printdlg.c --- dlls/commdlg/printdlg.c 2001/02/12 19:42:08 1.37 +++ dlls/commdlg/printdlg.c 2001/02/24 19:52:37 @@ -940,12 +940,20 @@ case rad1: /* Paperorientation */ if (lppd->Flags & PD_PRINTSETUP) + { lpdm->u1.s1.dmOrientation = DMORIENT_PORTRAIT; + SendDlgItemMessageA(hDlg, ico1, STM_SETIMAGE, (WPARAM) IMAGE_ICON, + (LPARAM)(PrintStructures->hPortraitIcon)); + } break; case rad2: /* Paperorientation */ if (lppd->Flags & PD_PRINTSETUP) + { lpdm->u1.s1.dmOrientation = DMORIENT_LANDSCAPE; + SendDlgItemMessageA(hDlg, ico1, STM_SETIMAGE, (WPARAM) IMAGE_ICON, + (LPARAM)(PrintStructures->hLandscapeIcon)); + } break; case cmb1:

1 0

SHLocalAlloc
by J.Brown (Ender/Amigo) Feb. 24, 2001

Feb. 24, 2001

I've been trying to get the Windows ME version of internet explorer/explorer to load successfully under Wine.. However, it runs into an unimplemented SHLocalAlloc function in shell32. This appears to be an undocumented function, or I'm looking in the wrong place... has anyone got a patch or API specs on it? Regards, Ender _________________________ ______________________________ | James 'Ender' Brown | "Where are we going, and why | | http://www.enderboi.com | am I in this handbasket?!?" | +-------------------------+------------------------------+

2 1

huge library renaming ?
by Andreas Mohr Feb. 24, 2001

Feb. 24, 2001

Hello all, one thing that occurred to me: Shouldn't we rename *all* Wine libraries to libwineXXX ? AFAIR there have been several naming conflicts with other projects (libole, ...), and people who need to remove a previous Wine install from their system manually have a rather hard time... Any reason for not doing this ? I can't think of any... If this is a good thing, then we should do this NOW, not when it's too late. The current drawbacks are just too much IMHO. Andreas Mohr

6 7

Re: ./dlls/libntdll.so: undefined reference to `PTHREAD_init_done'
by Alexandre Julliard Feb. 23, 2001

Feb. 23, 2001

Gerald Pfeifer <pfeifer(a)dbai.tuwien.ac.at> writes: > I'm leaving for holidays very soon and have to proof-read some 60 exams > before that, so I won't be able to track this down, but perhaps one of > could fix the build failure seen on FreeBSD 4.2? > > Perhaps just some incomplete #ifdef ... #endif sequence? Yep, here's a fix: Index: scheduler/pthread.c =================================================================== RCS file: /opt/cvs-commit/wine/scheduler/pthread.c,v retrieving revision 1.11 diff -u -r1.11 pthread.c --- scheduler/pthread.c 2001/02/23 01:37:05 1.11 +++ scheduler/pthread.c 2001/02/23 22:27:07 @@ -18,6 +18,13 @@ #include "winbase.h" #include "thread.h" +static int init_done; + +void PTHREAD_init_done(void) +{ + init_done = 1; +} + /* Currently this probably works only for glibc2, * which checks for the presence of double-underscore-prepended * pthread primitives, and use them if available. @@ -86,13 +93,6 @@ #define MAX_KEYS 16 /* libc6 doesn't use that many, but... */ #define P_OUTPUT(stuff) write(2,stuff,strlen(stuff)) - -static int init_done; - -void PTHREAD_init_done(void) -{ - init_done = 1; -} void __pthread_initialize(void) { -- Alexandre Julliard julliard(a)winehq.com

2 1

./dlls/libntdll.so: undefined reference to `PTHREAD_init_done'
by Gerald Pfeifer Feb. 23, 2001

Feb. 23, 2001

I'm leaving for holidays very soon and have to proof-read some 60 exams before that, so I won't be able to track this down, but perhaps one of could fix the build failure seen on FreeBSD 4.2? Perhaps just some incomplete #ifdef ... #endif sequence? : rm -f libwine_unicode.so && ln -s unicode/libwine_unicode.so libwine_unicode.so rm -f libwine_uuid.a && ln -s ole/libwine_uuid.a libwine_uuid.a gmake[1]: Entering directory `/.amd_mnt/vexpert/files8/test/wine/miscemu' LD_LIBRARY_PATH="../unicode:$LD_LIBRARY_PATH" ../tools/winebuild/winebuild -fPIC -L../dlls -o wine.spec.c -spec wine.spec /usr/bin/gcc -c -I. -I. -I../include -I../include -g -O2 -Wall -fno-strength-reduce -mpreferred-stack-boundary=2 -D__WINE__ -D_REENTRANT -I/usr/X11R6/include -o wine.spec.o wine.spec.c /usr/bin/gcc -c -I. -I. -I../include -I../include -g -O2 -Wall -fno-strength-reduce -mpreferred-stack-boundary=2 -D__WINE__ -D_REENTRANT -I/usr/X11R6/include -o main.o main.c ld -r wine.spec.o main.o -o miscemu.o gmake[1]: Leaving directory `/.amd_mnt/vexpert/files8/test/wine/miscemu' /usr/bin/gcc -o wine miscemu/miscemu.o -L./dlls -lntdll -L./library -lwine -L./unicode -lwine_unicode -lncurses -lxpg4 -lm -lutil ./dlls/libntdll.so: undefined reference to `PTHREAD_init_done' gmake: *** [wine] Error 1 Gerald -- Gerald "Jerry" pfeifer(a)dbai.tuwien.ac.at http://www.dbai.tuwien.ac.at/~pfeifer/

1 0

Re: Perl/Wine extension for perusal
by Alexandre Julliard Feb. 23, 2001

Feb. 23, 2001

Eric Pouech <Eric.Pouech(a)wanadoo.fr> writes: > Do you really feel like a C compiler is less common than a perl binary > under Windows ? I seriously doubt it... Anybody can install a perl binary on their machine, while nearly all Windows compilers are commercial software... > well, the stubs between perl and windows will not be exactly the same > anyway, so you'll anyway introduce code differences between the two > (not to speak about the perl interpreters which might have small differences > too). You'll need some serious testing to make sure that both interpreters behave the same way of course; but you only have to do this once, you can then share test scripts freely. If you have to compile them you'll never know if your foo.exe and your foo.so were compiled from the same source, since you cannot diff them to check. > In some other cases, it may also be interesting > to simply run existing programs (if they exist). This shouldn't part > of the whole test system, but if program exists then use it (of course > command based programs are much easier than UI ones...) That's a completely different test environment. The perl stuff is meant for unit testing (a single API at a time), and especially for catching regressions. Running whole applications is of course necessary too, but it's not the same usage nor the same goal. I don't want 'make test' to launch winword so that I can test it too. > where I want to end up to is that we'd need several tests environments > (perl to be one, pure C could be another one... - it's anyway needed to > test the Winelib part, and the associated tools..., command line programs > from shell scripts could be a third). > the driving idea would be that all of those test tools spit the same > type of outputs (they all belong to the first pass), so we can share > the analysis tools I don't see any need for that. The tests and the results are very different, and I don't see what you'll be able to share. The result of the unit test would be something like 'HeapFree does not set the correct last error code when called with pointer xxx'; the result of running an application will be 'winword crashes when I click on save'. It's a completely different approach to testing, both are necessary but not within the same environment IMO. > there's just one point that worries me. Let me explain how I ended up with > XML. one thing I don't like is to have a "reference" file, but I don't > know what it refers to. I think the test process should output both the result > of the test (pure ASCII is fine) but also the environment of the test > (Windows - if so version, even DLLs used... -, vs wine - which version, which > DLLs are used, native vs builtin...) so that we could make usefull > comparisons But none of this information is relevant for unit testing. The only information that may be needed is the Windows version, and this only for the few APIs that actually behave differently between versions. And if you do your test scripts right you don't even need to know about it. For instance, instead of doing something like: kernel32->MapViewOfFile(bad params); print kernel32->GetLastError(); which would print different things on 95 and NT, you'd do: kernel32->MapViewOfFile(bad params); $err = kernel32->GetLastError(); if (kernel32->GetVersion() == win95) { print ($err == ERROR_INVALID_ADDRESS) ? "OK" : "failed: $err"; } else { print ($err == ERROR_INVALID_PARAMETER) ? "OK" : "failed: $err"; } This way the script always prints the same thing no matter the Windows version, and you can use a simple diff against a single reference file. -- Alexandre Julliard julliard(a)winehq.com

2 1