July 2002 - Wine-Devel - list.winehq.org

Dinput - Keyb Bug
by Kristoffer Ericson July 24, 2002

July 24, 2002

I'm trying to get StarSiege Tribes (1) to work, and from what i gather is it suffering from a quite common wine-gaming-problem (both wine & winex). The game starts smoothly enough but keyboard is dead. When i press any key it will instantly drop out and quit. No error message or breaks. Considering the keyboard makes you move it basicly leaves you jumping up and down shooting at everything that comes..=) Other than the keyboard error tribes runs fine. I daily run updates from winex & wine but been working at this problem for about 2 weeks. I've read all the info i could find on the subject and from what i can gather is that tribes used to work on older wine. So can anyone give me some futher info about where i could find older wine-archives or if the dinput (i guess the problem is due to dinput) problem is about to be solvedŽ, tweaks, patches, ideas.. With respect Ken _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com

3 2

Coded breakpoints
by Max July 24, 2002

July 24, 2002

Maybe it's a stupid question, but... is there a way to hard-code a breakpoint ? I need to check a bit of code that gets called too many times and I'd like to put a conditional breakpoints compiled in code; no way to use winedbg built-in conditional breaks, the condition is too complicated..... Regards Max hmmm... BTW, somebody knows what's the meaning ow window message # 0x1018 ? :-)

6 5

Winelib and documentation
by steve_lustbader＠hsgmed.com July 23, 2002

July 23, 2002

I've been having some trouble using winelib (with spec files) following the documentation on the web site. A few people in the IRC channel were under the impression that winelib had changed and the docs aren't really relevant anymore. Is the documentation going to be updated to the current status of the source? ****************************** Steve Lustbader Philips Medical Systems E-mail: steve_lustbader(a)hsgmed.com 3000 Minuteman Road, MS 0105 Voice: 978 659 3713 Andover, MA 01810

3 2

Re: Configure.in
by Gregg Mattinson July 23, 2002

July 23, 2002

Same thing is defined on my system, so I think it is correct. LD_PATH is used to add paths infront of LD_LIBRARY_PATH for when wrc and winebuild are run. On my system, before the line you mentioned, LD_PATH is set to $wine/library:$wine/dlls. Then, it is changed to prepend itself to the environment variable LD_LIBRARY_PATH. Gregg Mattinson Co-op Developer Sun Microsystems of Canada >From: steve_lustbader(a)hsgmed.com >To: wine-devel(a)winehq.com >Subject: Configure.in >Date: Tue, 23 Jul 2002 14:20:53 -0600 > >In the configure.in that winemaker generates for me, LD_PATH gets defined as LD_PATH="LD_LIBRARY_PATH=\"$LD_PATH:\$\$LD_LIBRARY_PATH\"" It seems like it's missing a linebreak, or it's doing something very weird. Is this right? > >****************************** >Steve Lustbader > >Philips Medical Systems E-mail: steve_lustbader(a)hsgmed.com >3000 Minuteman Road, MS 0105 Voice: 978 659 3713 >Andover, MA 01810 >

1 0

Re: PATCH: [Bug 19] - font enumeration problems for aliased gdi fonts
by Huw D M Davies July 23, 2002

July 23, 2002

On Tue, Jul 23, 2002 at 01:00:59PM -0700, Rafael Kitover wrote: > This patch fixes the "Invalid Property Value" message box that pops up > in older visual basic programs on startup when they try to call > ENUMFONTS on the default "MS Sans Serif" font for example. > > (reference: http://www.winehq.com/hypermail/wine-bugs/2002/05/0116.html) > > License: LGPL, X11 > > Changelog: > Rafael Kitover <caelum(a)debian.org> > Fix ENUMFONTS on aliased gdi fonts What's exactly the problem here? Is it lack of support of 16bit EnumFonts ? Huw.

1 0

Configure.in
by steve_lustbader＠hsgmed.com July 23, 2002

July 23, 2002

In the configure.in that winemaker generates for me, LD_PATH gets defined as LD_PATH="LD_LIBRARY_PATH=\"$LD_PATH:\$\$LD_LIBRARY_PATH\"" It seems like it's missing a linebreak, or it's doing something very weird. Is this right? ****************************** Steve Lustbader Philips Medical Systems E-mail: steve_lustbader(a)hsgmed.com 3000 Minuteman Road, MS 0105 Voice: 978 659 3713 Andover, MA 01810

1 0

RE: wine/dlls crtdll/crtdll.spec crtdll/crtdll_mai ...
by Patrik Stridvall July 23, 2002

July 23, 2002

> Modified files: > dlls/crtdll : crtdll.spec crtdll_main.c > dlls/msvcrt20 : msvcrt20.spec > dlls/shell32 : shell32.spec > > Log message: > Fixed broken forwards reported by Patrik Stridvall. Much better. No broken forwards reported by winapi_check any longer. However I don't think your fix was 100% correct. winapi_check now says dlls/msvcrt/string.c:52: <>: char * _strdec(char *,char *): documentation: _strdec (MSVCRT.@) wrong dlls/msvcrt/string.c:75: <>: char * _strinc(char *): documentation: _strinc (MSVCRT.@) wrong dlls/msvcrt/string.c:83: <>: unsigned int _strnextc(char *): documentation: _strnextc (MSVCRT.@) wrong dlls/msvcrt/string.c:93: <>: char * _strninc(char *,unsigned int): documentation: _strninc (MSVCRT.@) wrong dlls/msvcrt/string.c:143: <>: unsigned int _strncnt(char *,unsigned int): documentation: _strncnt (MSVCRT.@) wrong dlls/msvcrt/string.c:152: <>: char * _strspnp(char *,char *): documentation: _strspnp (MSVCRT.@) wrong The problem is not what the error messages suggest though, winapi_check is far from prefect. :-) Anyway, the real problem seems to be that the the functions you implemented in crtdll_main.c were already implemented in msvcrt. However they were not exported. Examining the msvcrt.dll on my Windows 98 computer indicates that this is correct they shouldn't be exported. crtdll.dll does exactly as Wine does though. So I guess the implementation of the functions above should only be in CRTDLL and not in MSVCRT. Will you fix it or should I?

2 1

Re: PATCH: SetParent optimization
by Ann and Jason Edmeades July 23, 2002

July 23, 2002

> Probably SetWindowLong(GWL_HWNDPARENT) should not do a full SetParent, > but just set the window owner. Looks like this needs more testing > under Windows to find out exactly what it's supposed to do. Interestingly I took out that SetParent call as a hack to get beyond bug#825 which is exactly what VB is doing for 'modal' windows (setting GWL_HWNDPARENT) which basically means modal windows become unusable. Jason

1 0

RE: Winelib and documentation
by Andriy Palamarchuk July 23, 2002

July 23, 2002

Steve, if you don't mind lets continue the discussion in public. --- "LUSTBADER,STEVE (Non-A-hsgAndover,ex1)" <steve_lustbader(a)hsgmed.com> wrote: > > > Is the > > > documentation going to be updated to the current > > > status of the source? > > > > Yes, but I do not know when. As far as I know > nobody > > is working on the guide right now. > > If you provide information which part of the guide > is > > outdated somebody may want to fix it. > > > > The problem I was specifically having was with spec > files and import statements - it seems like imports > don't belong in specs anymore. Yes, you are right here. Now it is done by the following definition in Makefile.in file: ... IMPORTS = advapi32 kernel32 ... As an example of using Winelib I advise you to look into Wine programs (see programs subdirectory of the Wine source tree). These programs are compiled as Winelib programs, you probably will want to do something similiar. Andriy __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com

1 0

Problem with wineconsole
by DanteAliegri July 23, 2002

July 23, 2002

I'd suggest the following patch as an easy way to tell that something in wineconsole is going wrong. All I was getting was that the backend had failed - no indication of why. --Dante --- user.c Tue Jul 23 09:29:23 2002 +++ newuser.c Tue Jul 23 09:29:54 2002 @@ -550,7 +550,7 @@ fc.data = data; fc.done = 0; EnumFontFamilies(PRIVATE(data)->hMemDC, NULL, get_first_font_enum, (LPARAM)&fc); - if (!fc.done) WINE_WARN("Couldn't find a decent font, aborting\n"); + if (!fc.done) WINE_ERR("Couldn't find a decent font, aborting\n"); return fc.done; }

1 0

Re: Threading on Solaris
by Gregg Mattinson July 23, 2002

July 23, 2002

Threads on Solaris are a big issue for Sun, so I will start tackling this problem today. Thanks for telling me all the issues Francois. I have a hack-ish version implemented, and now I can create a real solution to the problem. Gregg Mattinson Co-op Developer Sun Microsystems of Canada >From: Francois Gouget <fgouget(a)codeweavers.com> >To: wine-devel(a)winehq.com >CC: Gregg Mattinson <gm138242(a)opcom-mail.canada.sun.com> >Subject: Threading on Solaris >Date: Tue, 23 Jul 2002 00:35:09 -0700 > >Hi, > > >Some time ago I did some tests of Wine on Solaris x86 and found that >there is a problem with the way we handle threads due to the differences >between the Linux and Solaris threading models. These differences are >also relevant for Solaris Sparc and probably many other Unices. > >Unfortunately I don't have time to work on it anymore so I created a bug >report in Bugzilla where I tried to dump the relevant information, >including a patch to illustrate the issues and the start of a fix. I >hope it will be useful to someone... maybe Gregg who has been doing a >lot of Solaris work recently. > >http://bugs.winehq.com/show_bug.cgi?id=904 > > >-- >Francois Gouget >fgouget(a)codeweavers.com

1 0

Re: [Q] CreateProcess for Batch files
by us＠the-edmeades.demon.co.uk July 23, 2002

July 23, 2002

>I don't think we want to check extensions this way. We should simply >hand off all command lines we cannot execute another way to the >command interpreter (which could be made configurable so you can use >native cmd.exe if you have it). Isnt this what Windows uses the COMSPEC env var for? Surely we should (by default) set the COMSPEC env var to wcmd, and if someone wants to change it to the real cmd.exe then they can. If I remember rightly, a simple C pgm which issues system("fred.bat") fails, (cant remember what happens if you system a .exe though). This would then leave a change to the CreateProcess and varients to recognize bat pgms to launch the program defined in comspec by. Interestingly windows2000 seems to honour comspec, and .bat extensions are registered as 'batfile' (in registry) which in turn has a default handler of %1 %* which means internally it must recognize .bat extensions itself. Jason

1 0

Threading on Solaris
by Francois Gouget July 23, 2002

July 23, 2002

Hi, Some time ago I did some tests of Wine on Solaris x86 and found that there is a problem with the way we handle threads due to the differences between the Linux and Solaris threading models. These differences are also relevant for Solaris Sparc and probably many other Unices. Unfortunately I don't have time to work on it anymore so I created a bug report in Bugzilla where I tried to dump the relevant information, including a patch to illustrate the issues and the start of a fix. I hope it will be useful to someone... maybe Gregg who has been doing a lot of Solaris work recently. http://bugs.winehq.com/show_bug.cgi?id=904 -- Francois Gouget fgouget(a)codeweavers.com

1 0

Re: ShellExecute patch
by Duane Clark July 23, 2002

July 23, 2002

Steven Edwards wrote: >> I guess I am not sure what the problem is with WinExec. Originally >> ShellExecuteEx used CreateProcessA and ShellExecute used WinExec, >> which simply calls CreateProcessA. I could certainly directly call >> CreateProcessA if that is preferable. > > > Yes, I tried to do that once before but could not get it to work > quite right as I am still learning how to program. Mingw cant import > from the Win16 api so CreateProcess needs to be used if we want to > have shell32 for testing under mingw or use under ReactOS. Hmm, the WinExec looks fairly easy but the WinExec16 appears to be a bit more difficult to handle. Perhaps it could be handled more easily with some sort of ifdef around those parts? Any suggestions?

4 6

builtin winininet causes segfault - ie6
by Sylvain Petreolle July 23, 2002

July 23, 2002

running ie6 with wininet causes a segfault for now. launching it under winedbg reveals that the fault he wants to display when it crashes is an unimplemented function : wininet.dll.GetUrlCacheEntryInfoExW. ___________________________________________________________ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com

1 0

Re: China developing Wind
by shaw July 23, 2002

July 23, 2002

> Did you read this: > http://slashdot.org/article.pl?sid=02/07/19/2116234&mode=thread&tid=99 > > Are they using WINE? Do they know about WINE? It sure would help if they > work on the WINE source base :) > > Roland > > > I'm chinese,I'm tring my best to patch wine for supporting inputting chinse,though I'm newbie to Xlib programming and XIM. I know nothing about this news.

1 0

wininet http test blocks
by Sylvain Petreolle July 23, 2002

July 23, 2002

Hi, running make test blocks on wininiet http test. two behaviours : - running separate after 'make testclean', go in dlls/wininet and 'make test' runs ok. - running 'make testclean' and 'make test' in main directory to launch all tests just stops when starting wininet test and doesn't write anything more. comments ? ___________________________________________________________ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com

1 0

ShellExecute again
by Duane Clark July 23, 2002

July 23, 2002

Here is a much improved version (I hope), in case anyone wants to comment on it. I did a lot more testing this time, mainly by writing a test program where I tried as many combinations as I could think of. Tested on WinNT and wine using Word2000, WordPad and wine's notepad. Things tested: ShellExecute ShellExecuteEx with SEE_MASK_CLASSNAME with several combinations of fixed and replaced parameters supplying lpDirectory supplying both lpFile and lpParameters supplying only lpFile and getting the registry command from the file extension. Also tested with the pkzip installer, which uses this method to invoke MSI. testing of both open and print commands Some things not yet tested. SEE_MASK_IDLIST and SEE_MASK_INVOKEIDLIST, since I have not figured out how these IDLists work yet (I don't know how to put that in my test program). The URL handling, since ..mumble.. I can't install either IE or Mozilla in Wine. Same problem as Boris Reisig mentioned a few days ago... I also plan to try to copy the WinExec16 stuff over, but that is not in here yet. Index: dlls/shell32/shellord.c =================================================================== RCS file: /home/wine/wine/dlls/shell32/shellord.c,v retrieving revision 1.99 diff -u -r1.99 shellord.c --- dlls/shell32/shellord.c 3 Jul 2002 21:07:36 -0000 1.99 +++ dlls/shell32/shellord.c 23 Jul 2002 02:29:56 -0000 @@ -926,192 +926,6 @@ { FIXME("0x%08lx 0x%08lx stub\n",x,z); return 0; } -/************************************************************************* - * ShellExecuteEx [SHELL32.291] - * - */ -BOOL WINAPI ShellExecuteExAW (LPVOID sei) -{ if (SHELL_OsIsUnicode()) - return ShellExecuteExW (sei); - return ShellExecuteExA (sei); -} -/************************************************************************* - * ShellExecuteExA [SHELL32.292] - * - * placeholder in the commandline: - * %1 file - * %2 printer - * %3 driver - * %4 port - * %I adress of a global item ID (explorer switch /idlist) - * %L ??? path/url/current file ??? - * %S ??? - * %* all following parameters (see batfile) - */ -BOOL WINAPI ShellExecuteExA (LPSHELLEXECUTEINFOA sei) -{ CHAR szApplicationName[MAX_PATH],szCommandline[MAX_PATH],szPidl[20]; - LPSTR pos; - int gap, len; - STARTUPINFOA startup; - PROCESS_INFORMATION info; - - WARN("mask=0x%08lx hwnd=0x%04x verb=%s file=%s parm=%s dir=%s show=0x%08x class=%s incomplete\n", - sei->fMask, sei->hwnd, debugstr_a(sei->lpVerb), - debugstr_a(sei->lpFile), debugstr_a(sei->lpParameters), - debugstr_a(sei->lpDirectory), sei->nShow, - (sei->fMask & SEE_MASK_CLASSNAME) ? debugstr_a(sei->lpClass) : "not used"); - - ZeroMemory(szApplicationName,MAX_PATH); - if (sei->lpFile) - strcpy(szApplicationName, sei->lpFile); - - ZeroMemory(szCommandline,MAX_PATH); - if (sei->lpParameters) - strcpy(szCommandline, sei->lpParameters); - - if (sei->fMask & (SEE_MASK_CLASSKEY | SEE_MASK_INVOKEIDLIST | SEE_MASK_ICON | SEE_MASK_HOTKEY | - SEE_MASK_CONNECTNETDRV | SEE_MASK_FLAG_DDEWAIT | - SEE_MASK_DOENVSUBST | SEE_MASK_FLAG_NO_UI | SEE_MASK_UNICODE | - SEE_MASK_NO_CONSOLE | SEE_MASK_ASYNCOK | SEE_MASK_HMONITOR )) - { - FIXME("flags ignored: 0x%08lx\n", sei->fMask); - } - - /* launch a document by fileclass like 'Wordpad.Document.1' */ - if (sei->fMask & SEE_MASK_CLASSNAME) - { - /* FIXME: szCommandline should not be of a fixed size. Plus MAX_PATH is way too short! */ - /* the commandline contains 'c:\Path\wordpad.exe "%1"' */ - HCR_GetExecuteCommand(sei->lpClass, (sei->lpVerb) ? sei->lpVerb : "open", szCommandline, sizeof(szCommandline)); - /* FIXME: get the extension of lpFile, check if it fits to the lpClass */ - TRACE("SEE_MASK_CLASSNAME->'%s'\n", szCommandline); - } - - /* process the IDList */ - if ( (sei->fMask & SEE_MASK_INVOKEIDLIST) == SEE_MASK_INVOKEIDLIST) /*0x0c*/ - { - SHGetPathFromIDListA (sei->lpIDList,szApplicationName); - TRACE("-- idlist=%p (%s)\n", sei->lpIDList, szApplicationName); - } - else - { - if (sei->fMask & SEE_MASK_IDLIST ) - { - pos = strstr(szCommandline, "%I"); - if (pos) - { - LPVOID pv; - HGLOBAL hmem = SHAllocShared ( sei->lpIDList, ILGetSize(sei->lpIDList), 0); - pv = SHLockShared(hmem,0); - sprintf(szPidl,":%p",pv ); - SHUnlockShared(pv); - - gap = strlen(szPidl); - len = strlen(pos)-2; - memmove(pos+gap,pos+2,len); - memcpy(pos,szPidl,gap); - - } - } - } - - TRACE("execute:'%s','%s'\n",szApplicationName, szCommandline); - - if (szCommandline[0]) { - strcat(szApplicationName, " "); - strcat(szApplicationName, szCommandline); - } - - ZeroMemory(&startup,sizeof(STARTUPINFOA)); - startup.cb = sizeof(STARTUPINFOA); - - if (! CreateProcessA(NULL, szApplicationName, - NULL, NULL, FALSE, 0, - NULL, sei->lpDirectory, - &startup, &info)) - { - BOOL failed = TRUE; - - if ((!sei->lpVerb)||(!strcasecmp(sei->lpVerb,"open"))) - { - LPSTR ext = PathFindExtensionA(szApplicationName); - CHAR key[1023]; - CHAR buffer[1023]; - CHAR cmdline[1023]; - DWORD size; - - sprintf(key,"Software\\Classes\\%s",ext); - size = 1023; - if (!RegQueryValueA(HKEY_LOCAL_MACHINE,key,buffer,&size)) - { - sprintf(key,"Software\\Classes\\%s\\shell\\%s\\command", buffer, - (sei->lpVerb)?sei->lpVerb:"open"); - size = 1023; - if (!RegQueryValueA(HKEY_LOCAL_MACHINE,key,buffer,&size)) - { - sprintf(cmdline,"%s \"%s\"",buffer,szApplicationName); - if (CreateProcessA(NULL,cmdline, NULL, NULL, FALSE, 0, - NULL, sei->lpDirectory, &startup, &info)) - failed = FALSE; - } - } - } - - if (failed) - { - sei->hInstApp = GetLastError(); - return FALSE; - } - } - - sei->hInstApp = 33; - - if(sei->fMask & SEE_MASK_NOCLOSEPROCESS) - sei->hProcess = info.hProcess; - else - CloseHandle( info.hProcess ); - CloseHandle( info.hThread ); - return TRUE; -} -/************************************************************************* - * ShellExecuteExW [SHELL32.293] - * - */ -BOOL WINAPI ShellExecuteExW (LPSHELLEXECUTEINFOW sei) -{ SHELLEXECUTEINFOA seiA; - DWORD ret; - - TRACE("%p\n", sei); - - memcpy(&seiA, sei, sizeof(SHELLEXECUTEINFOA)); - - if (sei->lpVerb) - seiA.lpVerb = HEAP_strdupWtoA( GetProcessHeap(), 0, sei->lpVerb); - - if (sei->lpFile) - seiA.lpFile = HEAP_strdupWtoA( GetProcessHeap(), 0, sei->lpFile); - - if (sei->lpParameters) - seiA.lpParameters = HEAP_strdupWtoA( GetProcessHeap(), 0, sei->lpParameters); - - if (sei->lpDirectory) - seiA.lpDirectory = HEAP_strdupWtoA( GetProcessHeap(), 0, sei->lpDirectory); - - if ((sei->fMask & SEE_MASK_CLASSNAME) && sei->lpClass) - seiA.lpClass = HEAP_strdupWtoA( GetProcessHeap(), 0, sei->lpClass); - else - seiA.lpClass = NULL; - - ret = ShellExecuteExA(&seiA); - - if (seiA.lpVerb) HeapFree( GetProcessHeap(), 0, (LPSTR) seiA.lpVerb ); - if (seiA.lpFile) HeapFree( GetProcessHeap(), 0, (LPSTR) seiA.lpFile ); - if (seiA.lpParameters) HeapFree( GetProcessHeap(), 0, (LPSTR) seiA.lpParameters ); - if (seiA.lpDirectory) HeapFree( GetProcessHeap(), 0, (LPSTR) seiA.lpDirectory ); - if (seiA.lpClass) HeapFree( GetProcessHeap(), 0, (LPSTR) seiA.lpClass ); - - return ret; -} static LPUNKNOWN SHELL32_IExplorerInterface=0; /************************************************************************* Index: dlls/shell32/shlexec.c =================================================================== RCS file: /home/wine/wine/dlls/shell32/shlexec.c,v retrieving revision 1.3 diff -u -r1.3 shlexec.c --- dlls/shell32/shlexec.c 31 May 2002 23:25:52 -0000 1.3 +++ dlls/shell32/shlexec.c 23 Jul 2002 02:29:56 -0000 @@ -23,6 +23,7 @@ #include <stdlib.h> #include <string.h> +#include <stdio.h> #include <unistd.h> #include <ctype.h> #include <assert.h> @@ -30,6 +31,7 @@ #include "windef.h" #include "winerror.h" #include "winreg.h" +#include "heap.h" #include "shellapi.h" #include "shlobj.h" #include "shlwapi.h" @@ -37,6 +39,7 @@ #include "wine/winbase16.h" #include "shell32_main.h" +#include "undocshell.h" #include "wine/debug.h" @@ -45,16 +48,19 @@ /* this function is supposed to expand the escape sequences found in the registry * some diving reported that the following were used: * + %1, %2... seem to report to parameter of index N in ShellExecute pmts - + + %* seem to report to all parameter (or all remaining, ie after removing - * the already used %1 %2...) - * + %L seems to be %1 as long filename followed by the 8+3 variation - * + %l unknown - * + %S unknown - * + %I unknown + * %1 file + * %2 printer + * %3 driver + * %4 port + * %I adress of a global item ID (explorer switch /idlist) + * %L seems to be %1 as long filename followed by the 8+3 variation + * %S ??? + * %* all following parameters (see batfile) */ -static void argify(char* res, int len, const char* fmt, const char* lpFile) +static BOOL argify(char* res, int len, const char* fmt, const char* lpFile) { char xlpFile[1024]; + BOOL done = FALSE; while (*fmt) { @@ -67,25 +73,71 @@ *res++ = '%'; break; case '1': - if (SearchPathA(NULL, lpFile, ".exe", sizeof(xlpFile), xlpFile, NULL)) + case '*': + if (!done || (*fmt == '1')) { - strcpy(res, xlpFile); - res += strlen(xlpFile); - } - else - { - strcpy(res, lpFile); - res += strlen(lpFile); + if (SearchPathA(NULL, lpFile, ".exe", sizeof(xlpFile), xlpFile, NULL)) + { + strcpy(res, xlpFile); + res += strlen(xlpFile); + } + else + { + strcpy(res, lpFile); + res += strlen(lpFile); + } } break; default: FIXME("Unknown escape sequence %%%c\n", *fmt); } fmt++; + done = TRUE; } else *res++ = *fmt++; } *res = '\0'; + return done; +} + +/************************************************************************* + * SHELL_ExecuteA [Internal] + * + */ +static HINSTANCE SHELL_ExecuteA(char *lpCmd, LPSHELLEXECUTEINFOA sei, BOOL is32) +{ + STARTUPINFOA startup; + PROCESS_INFORMATION info; + HINSTANCE retval = 31; + + TRACE("Execute %s from directory %s\n", lpCmd, sei->lpDirectory); + ZeroMemory(&startup,sizeof(STARTUPINFOA)); + startup.cb = sizeof(STARTUPINFOA); + startup.dwFlags = STARTF_USESHOWWINDOW; + startup.wShowWindow = sei->nShow; + if (is32) + { + if (CreateProcessA(NULL, lpCmd, NULL, NULL, FALSE, 0, + NULL, sei->lpDirectory, &startup, &info)) + { + retval = (HINSTANCE)33; + if(sei->fMask & SEE_MASK_NOCLOSEPROCESS) + sei->hProcess = info.hProcess; + else + CloseHandle( info.hProcess ); + CloseHandle( info.hThread ); + } + else if ((retval = GetLastError()) >= (HINSTANCE)32) + { + FIXME("Strange error set by CreateProcess: %d\n", retval); + retval = (HINSTANCE)ERROR_BAD_FORMAT; + } + } + else + retval = WinExec16(lpCmd, sei->nShow); + + sei->hInstApp = retval; + return retval; } /************************************************************************* @@ -102,7 +154,7 @@ * command (it'll be used afterwards for more information * on the operation) */ -static HINSTANCE SHELL_FindExecutable(LPCSTR lpFile, LPCSTR lpOperation, +static HINSTANCE SHELL_FindExecutable(LPCSTR lpPath, LPCSTR lpFile, LPCSTR lpOperation, LPSTR lpResult, LPSTR key) { char *extension = NULL; /* pointer to file extension */ @@ -129,7 +181,7 @@ return 2; /* File not found. Close enough, I guess. */ } - if (SearchPathA(NULL, lpFile, ".exe", sizeof(xlpFile), xlpFile, NULL)) + if (SearchPathA(lpPath, lpFile, ".exe", sizeof(xlpFile), xlpFile, NULL)) { TRACE("SearchPathA returned non-zero\n"); lpFile = xlpFile; @@ -287,7 +339,7 @@ */ static unsigned dde_connect(char* key, char* start, char* ddeexec, const char* lpFile, - int iCmdShow, BOOL is32) + LPSHELLEXECUTEINFOA sei, BOOL is32) { char* endkey = key + strlen(key); char app[256], topic[256], ifexec[256], res[256]; @@ -327,7 +379,7 @@ if (!hConv) { TRACE("Launching '%s'\n", start); - ret = (is32) ? WinExec(start, iCmdShow) : WinExec16(start, iCmdShow); + ret = SHELL_ExecuteA(start, sei, is32); if (ret < 32) { TRACE("Couldn't launch\n"); @@ -358,7 +410,10 @@ return ret; } -static HINSTANCE execute_from_key(LPSTR key, LPCSTR lpFile, INT iShowCmd, BOOL is32) +/************************************************************************* + * execute_from_key [Internal] + */ +static HINSTANCE execute_from_key(LPSTR key, LPCSTR lpFile, LPSHELLEXECUTEINFOA sei, BOOL is32) { char cmd[1024] = ""; LONG cmdlen = sizeof(cmd); @@ -380,15 +435,14 @@ if (RegQueryValueA(HKEY_CLASSES_ROOT, key, param, &paramlen) == ERROR_SUCCESS) { TRACE("Got ddeexec %s => %s\n", key, param); - retval = dde_connect(key, cmd, param, lpFile, iShowCmd, is32); + retval = dde_connect(key, cmd, param, lpFile, sei, is32); } else { /* Is there a replace() function anywhere? */ cmd[cmdlen] = '\0'; argify(param, sizeof(param), cmd, lpFile); - - retval = (is32) ? WinExec(param, iShowCmd) : WinExec16(param, iShowCmd); + retval = SHELL_ExecuteA(param, sei, is32); } } else TRACE("ooch\n"); @@ -396,96 +450,6 @@ return retval; } -static HINSTANCE SHELL_Execute(HWND hWnd, LPCSTR lpOperation, LPCSTR lpFile, - LPCSTR lpParameters, LPCSTR lpDirectory, - INT iShowCmd, BOOL is32) -{ - HINSTANCE retval = 31; - char old_dir[1024]; - char cmd[1024]; - - TRACE("(%04x,'%s','%s','%s','%s',%x)\n", - hWnd, lpOperation ? lpOperation:"<null>", lpFile ? lpFile:"<null>", - lpParameters ? lpParameters : "<null>", - lpDirectory ? lpDirectory : "<null>", iShowCmd); - - if (lpFile == NULL) return 0; /* should not happen */ - if (lpOperation == NULL) /* default is open */ - lpOperation = "open"; - - if (lpDirectory) - { - GetCurrentDirectoryA(sizeof(old_dir), old_dir); - SetCurrentDirectoryA(lpDirectory); - } - - /* First try to execute lpFile with lpParameters directly */ - strcpy(cmd, lpFile); - if (lpParameters) - { - strcat(cmd, " "); - strcat(cmd, lpParameters); - } - - retval = (is32) ? WinExec(cmd, iShowCmd) : WinExec16(cmd, iShowCmd); - - /* Unable to execute lpFile directly - Check if we can match an application to lpFile */ - if (retval < 32) - { - char lpstrProtocol[256]; - - cmd[0] = '\0'; - retval = SHELL_FindExecutable(lpFile, lpOperation, cmd, lpstrProtocol); - - if (retval > 32) /* Found */ - { - TRACE("%s/%s => %s/%s\n", lpFile, lpOperation, cmd, lpstrProtocol); - if (*lpstrProtocol) - retval = execute_from_key(lpstrProtocol, lpFile, iShowCmd, is32); - else - retval = (is32) ? WinExec(cmd, iShowCmd) : WinExec16(cmd, iShowCmd); - } - else if (PathIsURLA((LPSTR)lpFile)) /* File not found, check for URL */ - { - LPSTR lpstrRes; - INT iSize; - - lpstrRes = strchr(lpFile, ':'); - iSize = lpstrRes - lpFile; - - TRACE("Got URL: %s\n", lpFile); - /* Looking for ...protocol\shell\lpOperation\command */ - strncpy(lpstrProtocol, lpFile, iSize); - lpstrProtocol[iSize] = '\0'; - strcat(lpstrProtocol, "\\shell\\"); - strcat(lpstrProtocol, lpOperation); - strcat(lpstrProtocol, "\\command"); - - /* Remove File Protocol from lpFile */ - /* In the case file://path/file */ - if (!strncasecmp(lpFile, "file", iSize)) - { - lpFile += iSize; - while (*lpFile == ':') lpFile++; - } - - retval = execute_from_key(lpstrProtocol, lpFile, iShowCmd, is32); - } - /* Check if file specified is in the form www.??????.*** */ - else if (!strncasecmp(lpFile, "www", 3)) - { - /* if so, append lpFile http:// and call ShellExecute */ - char lpstrTmpFile[256] = "http://" ; - strcat(lpstrTmpFile, lpFile); - retval = ShellExecuteA(hWnd, lpOperation, lpstrTmpFile, NULL, NULL, 0); - } - } - if (lpDirectory) - SetCurrentDirectoryA(old_dir); - return retval; -} - /************************************************************************* * FindExecutableA [SHELL32.@] */ @@ -512,7 +476,7 @@ SetCurrentDirectoryA(lpDirectory); } - retval = SHELL_FindExecutable(lpFile, "open", lpResult, NULL); + retval = SHELL_FindExecutable(lpDirectory, lpFile, "open", lpResult, NULL); TRACE("returning %s\n", lpResult); if (lpDirectory) @@ -530,14 +494,204 @@ } /************************************************************************* + * ShellExecuteExA32 [Internal] + */ +BOOL WINAPI ShellExecuteExA32 (LPSHELLEXECUTEINFOA sei, BOOL is32) +{ + CHAR szApplicationName[MAX_PATH],szCommandline[MAX_PATH],szPidl[20],fileName[MAX_PATH]; + LPSTR pos; + int gap, len; + char lpstrProtocol[256]; + LPCSTR lpFile,lpOperation; + HINSTANCE retval = 31; + char cmd[1024]; + BOOL done; + + TRACE("mask=0x%08lx hwnd=0x%04x verb=%s file=%s parm=%s dir=%s show=0x%08x class=%s\n", + sei->fMask, sei->hwnd, debugstr_a(sei->lpVerb), + debugstr_a(sei->lpFile), debugstr_a(sei->lpParameters), + debugstr_a(sei->lpDirectory), sei->nShow, + (sei->fMask & SEE_MASK_CLASSNAME) ? debugstr_a(sei->lpClass) : "not used"); + + sei->hProcess = (HANDLE)NULL; + ZeroMemory(szApplicationName,MAX_PATH); + if (sei->lpFile) + strcpy(szApplicationName, sei->lpFile); + + ZeroMemory(szCommandline,MAX_PATH); + if (sei->lpParameters) + strcpy(szCommandline, sei->lpParameters); + + if (sei->fMask & ((SEE_MASK_CLASSKEY & ~SEE_MASK_CLASSNAME) | + SEE_MASK_INVOKEIDLIST | SEE_MASK_ICON | SEE_MASK_HOTKEY | + SEE_MASK_CONNECTNETDRV | SEE_MASK_FLAG_DDEWAIT | + SEE_MASK_DOENVSUBST | SEE_MASK_FLAG_NO_UI | SEE_MASK_UNICODE | + SEE_MASK_NO_CONSOLE | SEE_MASK_ASYNCOK | SEE_MASK_HMONITOR )) + { + FIXME("flags ignored: 0x%08lx\n", sei->fMask); + } + + /* process the IDList */ + if ( (sei->fMask & SEE_MASK_INVOKEIDLIST) == SEE_MASK_INVOKEIDLIST) /*0x0c*/ + { + SHGetPathFromIDListA (sei->lpIDList,szApplicationName); + TRACE("-- idlist=%p (%s)\n", sei->lpIDList, szApplicationName); + } + else + { + if (sei->fMask & SEE_MASK_IDLIST ) + { + pos = strstr(szCommandline, "%I"); + if (pos) + { + LPVOID pv; + HGLOBAL hmem = SHAllocShared ( sei->lpIDList, ILGetSize(sei->lpIDList), 0); + pv = SHLockShared(hmem,0); + sprintf(szPidl,":%p",pv ); + SHUnlockShared(pv); + + gap = strlen(szPidl); + len = strlen(pos)-2; + memmove(pos+gap,pos+2,len); + memcpy(pos,szPidl,gap); + } + } + } + + if (sei->fMask & SEE_MASK_CLASSNAME) + { + /* launch a document by fileclass like 'WordPad.Document.1' */ + /* the Commandline contains 'c:\Path\wordpad.exe "%1"' */ + /* FIXME: szCommandline should not be of a fixed size. Plus MAX_PATH is way too short! */ + HCR_GetExecuteCommand(sei->lpClass, (sei->lpVerb) ? sei->lpVerb : "open", szCommandline, sizeof(szCommandline)); + /* FIXME: get the extension of lpFile, check if it fits to the lpClass */ + TRACE("SEE_MASK_CLASSNAME->'%s', doc->'%s'\n", szCommandline, szApplicationName); + + cmd[0] = '\0'; + done = argify(cmd, sizeof(cmd), szCommandline, szApplicationName); + if (!done && szApplicationName[0]) + { + strcat(cmd, " "); + strcat(cmd, szApplicationName); + } + retval = SHELL_ExecuteA(cmd, sei, is32); + if (retval > 32) + return TRUE; + else + return FALSE; + } + + /* We set the default to open, and that should generally work. + But that is not really the way the MS docs say to do it. */ + if (sei->lpVerb == NULL) + lpOperation = "open"; + else + lpOperation = sei->lpVerb; + + /* Else, try to execute the filename */ + TRACE("execute:'%s','%s'\n",szApplicationName, szCommandline); + + strcpy(fileName, szApplicationName); + lpFile = fileName; + if (szCommandline[0]) { + strcat(szApplicationName, " "); + strcat(szApplicationName, szCommandline); + } + + retval = SHELL_ExecuteA(szApplicationName, sei, is32); + if (retval > 32) + return TRUE; + + /* Else, try to find the executable */ + cmd[0] = '\0'; + retval = SHELL_FindExecutable(sei->lpDirectory, lpFile, lpOperation, cmd, lpstrProtocol); + if (retval > 32) /* Found */ + { + if (szCommandline[0]) { + strcat(cmd, " "); + strcat(cmd, szCommandline); + } + TRACE("%s/%s => %s/%s\n", szApplicationName, lpOperation, cmd, lpstrProtocol); + if (*lpstrProtocol) + retval = execute_from_key(lpstrProtocol, szApplicationName, sei, is32); + else + retval = SHELL_ExecuteA(cmd, sei, is32); + } + else if (PathIsURLA((LPSTR)lpFile)) /* File not found, check for URL */ + { + LPSTR lpstrRes; + INT iSize; + + lpstrRes = strchr(lpFile, ':'); + /* PathIsURLA probably should fail on strings without a ':', but it doesn't */ + if (lpstrRes) + iSize = lpstrRes - lpFile; + else + iSize = strlen(lpFile); + + TRACE("Got URL: %s\n", lpFile); + /* Looking for ...protocol\shell\lpOperation\command */ + strncpy(lpstrProtocol, lpFile, iSize); + lpstrProtocol[iSize] = '\0'; + strcat(lpstrProtocol, "\\shell\\"); + strcat(lpstrProtocol, lpOperation); + strcat(lpstrProtocol, "\\command"); + + /* Remove File Protocol from lpFile */ + /* In the case file://path/file */ + if (!strncasecmp(lpFile, "file", iSize)) + { + lpFile += iSize; + while (*lpFile == ':') lpFile++; + } + retval = execute_from_key(lpstrProtocol, lpFile, sei, is32); + } + /* Check if file specified is in the form www.??????.*** */ + else if (!strncasecmp(lpFile, "www", 3)) + { + /* if so, append lpFile http:// and call ShellExecute */ + char lpstrTmpFile[256] = "http://" ; + strcat(lpstrTmpFile, lpFile); + retval = ShellExecuteA(sei->hwnd, lpOperation, lpstrTmpFile, NULL, NULL, 0); + } + + if (retval <= 32) + { + sei->hInstApp = retval; + return FALSE; + } + + sei->hInstApp = 33; + return TRUE; +} + + +/************************************************************************* * ShellExecute [SHELL.20] */ HINSTANCE16 WINAPI ShellExecute16( HWND16 hWnd, LPCSTR lpOperation, LPCSTR lpFile, LPCSTR lpParameters, LPCSTR lpDirectory, INT16 iShowCmd ) { - return (HINSTANCE16)SHELL_Execute(hWnd, lpOperation, lpFile, - lpParameters, lpDirectory, iShowCmd, FALSE ); + SHELLEXECUTEINFOA sei; + HANDLE hProcess = 0; + + sei.cbSize = sizeof(sei); + sei.fMask = 0; + sei.hwnd = hWnd; + sei.lpVerb = lpOperation; + sei.lpFile = lpFile; + sei.lpParameters = lpParameters; + sei.lpDirectory = lpDirectory; + sei.nShow = iShowCmd; + sei.lpIDList = 0; + sei.lpClass = 0; + sei.hkeyClass = 0; + sei.dwHotKey = 0; + sei.hProcess = hProcess; + + ShellExecuteExA32 (&sei, FALSE); + return (HINSTANCE16)sei.hInstApp; } /************************************************************************* @@ -546,9 +700,87 @@ HINSTANCE WINAPI ShellExecuteA(HWND hWnd, LPCSTR lpOperation,LPCSTR lpFile, LPCSTR lpParameters,LPCSTR lpDirectory, INT iShowCmd) { + SHELLEXECUTEINFOA sei; + HANDLE hProcess = 0; + TRACE("\n"); - return SHELL_Execute( hWnd, lpOperation, lpFile, lpParameters, - lpDirectory, iShowCmd, TRUE ); + sei.cbSize = sizeof(sei); + sei.fMask = 0; + sei.hwnd = hWnd; + sei.lpVerb = lpOperation; + sei.lpFile = lpFile; + sei.lpParameters = lpParameters; + sei.lpDirectory = lpDirectory; + sei.nShow = iShowCmd; + sei.lpIDList = 0; + sei.lpClass = 0; + sei.hkeyClass = 0; + sei.dwHotKey = 0; + sei.hProcess = hProcess; + + ShellExecuteExA32 (&sei, TRUE); + return sei.hInstApp; +} + +/************************************************************************* + * ShellExecuteEx [SHELL32.291] + * + */ +BOOL WINAPI ShellExecuteExAW (LPVOID sei) +{ + if (SHELL_OsIsUnicode()) + return ShellExecuteExW (sei); + return ShellExecuteExA32 (sei, TRUE); +} + +/************************************************************************* + * ShellExecuteExA [SHELL32.292] + * + */ +BOOL WINAPI ShellExecuteExA (LPSHELLEXECUTEINFOA sei) +{ + return ShellExecuteExA32 (sei, TRUE); +} + +/************************************************************************* + * ShellExecuteExW [SHELL32.293] + * + */ +BOOL WINAPI ShellExecuteExW (LPSHELLEXECUTEINFOW sei) +{ + SHELLEXECUTEINFOA seiA; + DWORD ret; + + TRACE("%p\n", sei); + + memcpy(&seiA, sei, sizeof(SHELLEXECUTEINFOA)); + + if (sei->lpVerb) + seiA.lpVerb = HEAP_strdupWtoA( GetProcessHeap(), 0, sei->lpVerb); + + if (sei->lpFile) + seiA.lpFile = HEAP_strdupWtoA( GetProcessHeap(), 0, sei->lpFile); + + if (sei->lpParameters) + seiA.lpParameters = HEAP_strdupWtoA( GetProcessHeap(), 0, sei->lpParameters); + + if (sei->lpDirectory) + seiA.lpDirectory = HEAP_strdupWtoA( GetProcessHeap(), 0, sei->lpDirectory); + + if ((sei->fMask & SEE_MASK_CLASSNAME) && sei->lpClass) + seiA.lpClass = HEAP_strdupWtoA( GetProcessHeap(), 0, sei->lpClass); + else + seiA.lpClass = NULL; + + ret = ShellExecuteExA(&seiA); + + if (seiA.lpVerb) HeapFree( GetProcessHeap(), 0, (LPSTR) seiA.lpVerb ); + if (seiA.lpFile) HeapFree( GetProcessHeap(), 0, (LPSTR) seiA.lpFile ); + if (seiA.lpParameters) HeapFree( GetProcessHeap(), 0, (LPSTR) seiA.lpParameters ); + if (seiA.lpDirectory) HeapFree( GetProcessHeap(), 0, (LPSTR) seiA.lpDirectory ); + if (seiA.lpClass) HeapFree( GetProcessHeap(), 0, (LPSTR) seiA.lpClass ); + + return ret; } /************************************************************************* @@ -560,7 +792,25 @@ HINSTANCE WINAPI ShellExecuteW(HWND hwnd, LPCWSTR lpOperation, LPCWSTR lpFile, LPCWSTR lpParameters, LPCWSTR lpDirectory, INT nShowCmd) { - FIXME(": stub\n"); - return 0; + SHELLEXECUTEINFOW sei; + HANDLE hProcess = 0; + + TRACE("\n"); + sei.cbSize = sizeof(sei); + sei.fMask = 0; + sei.hwnd = hwnd; + sei.lpVerb = lpOperation; + sei.lpFile = lpFile; + sei.lpParameters = lpParameters; + sei.lpDirectory = lpDirectory; + sei.nShow = nShowCmd; + sei.lpIDList = 0; + sei.lpClass = 0; + sei.hkeyClass = 0; + sei.dwHotKey = 0; + sei.hProcess = hProcess; + + ShellExecuteExW (&sei); + return sei.hInstApp; }

1 0

[Q] CreateProcess for Batch files
by Uwe Bonnes July 23, 2002

July 23, 2002

Hallo, the Xilix Webpack Flow in one case tries to create a process with a batch file as argument: 09846d58:Call kernel32.CreateProcessA(00000000,403efee8 "ChipView.bat -f adcswitch.ngd -uc adcswitch.ucf -dev XC2C256-7-TQ144",00000000,00000000,00000001,00000000,00000000,00000000,405e6444,405e6434) ret=40605429 09846d58:Ret kernel32.CreateProcessA() retval=00000000 ret=406054290 What is a good way to implement batch handling in wine? Start wcmd and hand itthe batch file name and arguments? Expand and handle it in scheduler/process.c? Comments welcome! Btw: This Chipview batch file only expands environment variables, sets library pathes and calls java. I tried to use the native linux jre, but the programm put up a message that it couldn't read some file, which is obvious there. %XILINX%\java\nt\jre1.2.2\bin\java -mx64m -ss4M -classpath ".;%XILINX%\chipviewer\lib\ChipViewer.jar;%XILINX%\chipviewer\lib\jaxp.jar;%XILINX%\chipviewer\lib\parser.jar;%XILINX%\java\nt\jre1.2.2\lib\rt.jar"com.xilinx.chipviewer.pgms.main.ChipViewer -XILINX %XILINX% %1 %2 %3 %4 %5 %6 Bye -- Uwe Bonnes bon(a)elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------

3 2

Double DECL_GLOBAL_CONSTRUCTOR in latest CVS
by Uwe Bonnes July 22, 2002

July 22, 2002

Hallo, copiling a recent CVS, I got: gcc -c -I. -I. -I../../include -I../../include -g -O2 -Wall -mpreferred-stack-boundary=2 -fPIC -D__WINE__ -D_REENTRANT -I/usr/X11R6/include -o mouse/main.o mouse/main.c mouse/main.c:217: warning: `mousedev' defined but not used ld -r device.o dinput_main.o joystick/linux.o joystick/linuxinput.o keyboard/main.o mouse/main.o -o dinput.dll.tmp.o keyboard/main.o: In function `DECL_GLOBAL_CONSTRUCTOR': /home/bon/tmp/wine/compile/wine/dlls/dinput/keyboard/main.c(.text+0x380): multiple definition of `DECL_GLOBAL_CONSTRUCTOR' joystick/linuxinput.o(.text+0x550):/home/bon/tmp/wine/compile/wine/dlls/dinput/joystick/linuxinput.c: first defined here make: *** [dinput.dll.tmp.o] Fehler 1 Bye -- Uwe Bonnes bon(a)elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------

2 1

China developing Windows clone
by Roland July 22, 2002

July 22, 2002

Did you read this: http://slashdot.org/article.pl?sid=02/07/19/2116234&mode=thread&tid=99 Are they using WINE? Do they know about WINE? It sure would help if they work on the WINE source base :) Roland

2 1

Re: PATCH: SetParent optimization
by Alexandre Julliard July 22, 2002

July 22, 2002

Marcus Meissner <meissner(a)suse.de> writes: > Lotus Notes R5 5.0.10 has a Details Popup Window which stays over the > normal Lotus window usually. > > If it is started and the focus leaves this window, Lotus reparents > to the toplevel window, using "SetWindowLong(hwnd, GWL_HWNDPARENT, > toplevelhwnd);" and later does "BringWindowToTop(toplevelhwnd);". Probably SetWindowLong(GWL_HWNDPARENT) should not do a full SetParent, but just set the window owner. Looks like this needs more testing under Windows to find out exactly what it's supposed to do. -- Alexandre Julliard julliard(a)winehq.com

2 1

Put WINE into the donation directory?
by Roland July 22, 2002

July 22, 2002

Here is an open source donation directory: http://slashdot.org/articles/02/07/21/1813204.shtml?tid=117 How about adding WINE into it? Roland

1 0

Winsock 2 functions
by Peter Lord July 22, 2002

July 22, 2002

I'm trying to get a java application running under wine. Amazingly (at least to me :-) ), the application gets a fair way through loading lots of classes as it goes. But, the stumbling block is when the application starts to use network operations, specifically WPUCompleteOverlappedRequest and WSAAddressToStringA. Right now, these are unimplimented and the java app crashes when trying to call them. Before I start looking into these in more detail (I've really no idea what overlapped I/O is all about ...), does anyone plan to implement these in the near future ? Oh, BTW, before you ask... the java app loads a native windows dll as part of its functionality, so I can't use the Linux jvm :-( Cheers, Pete

2 2

Re: Resent: Partial PeekNamedPipe Implementation
by Alexandre Julliard July 22, 2002

July 22, 2002

Uwe Bonnes <bon(a)elektron.ikp.physik.tu-darmstadt.de> writes: > wine/server/pipe.c, wine/server/named_pipe.c: xxx_get_info > Return the number of bytes available for reading > wine/dlls/kernel/sync.c: PeekNamedPipe > Use get_file_info to get the number of bytes available for reading I don't think it's a good idea to overload get_file_info that way. You should retrieve the pipe file descriptor and do the FIONREAD on the client side. We will need the file descriptor anyway to implement the full peek functionality. -- Alexandre Julliard julliard(a)winehq.com

1 0

RE: Errors running winapi_extract --stub-statistics
by Patrik Stridvall July 22, 2002

July 22, 2002

> I think this is because the module name is no longer in the > .spec file. Lines > 71-73 of winapi_extract look for "name" in the .spec file, > which no longer > exists. Should we be using the file name as the module name? Correct. Patch for this and other problem with winapi_extract coming soon.

4 3

Re: Makedll.rules.in
by Gregg Mattinson July 22, 2002

July 22, 2002

Oops.. This patch fixes the linking of tests, but it breaks..well..all the .dlls, atleast for me. So, my question is, why does the $(MODULE).so rule in Makedll.rules.in contain $(LDDLLFLAGS)? Until I submitted this patch, that variable was not defined in the makefiles for the .dlls, and the dlls appeared to work fine. Now that this flag is defined, the .dlls don't work, but the tests do work. Should LDDLLFLAGS be removed from the $(MODULE).so rule? What is LDDLLFLAGS defined to on Linux? I only have a Solaris box here to test on, so my insight into the problem is limited. Any insight would be appreciated. Thanks, Gregg >From: Gregg Mattinson <gm138242(a)opcom-mail.canada.sun.com> >Subject: Makedll.rules.in >To: wine-patches(a)winehq.com >Date: Fri, 19 Jul 2002 10:39:22 -0400 (EDT) > >Changelog: dlls/Makedll.rules.in > - Added LDDLLFLAGS to Makedll.rules.in so that tests get linked properly > >Gregg Mattinson >Co-op Developer >Sun Microsystems of Canada

2 1

Broken forwards in .spec files
by Patrik Stridvall July 22, 2002

July 22, 2002

When I, with the help of Francois, fixed the statistics for forwarded functions in winapi_extract I notice that a few of the forwards in the .spec files are broken. winapi_check now checks for broken forward when it is run. However I'm not sure how the broken forwards are best fixed, so what I why I'm asking for people on the list with the appropriete knowledge to fix them. crtdll.spec: forward is broken: _strdec => msvcrt._strdec crtdll.spec: forward is broken: _strinc => msvcrt._strinc crtdll.spec: forward is broken: _strncnt => msvcrt._strncnt crtdll.spec: forward is broken: _strnextc => msvcrt._strnextc crtdll.spec: forward is broken: _strninc => msvcrt._strninc crtdll.spec: forward is broken: _strspnp => msvcrt._strspnp msvcrt20.spec: forward is broken: __seh_longjmp_unwind(a)4 => msvcrt.__seh_longjmp_unwind msvcrt20.spec: forward is broken: _mtlock => msvcrt._mtlock msvcrt20.spec: forward is broken: _mtunlock => msvcrt._mtunlock msvcrt20.spec: forward is broken: _tccpy => msvcrt._tccpy msvcrt20.spec: forward is broken: _tclen => msvcrt._tclen msvcrt20.spec: forward is broken: _tcschr => msvcrt._tcschr msvcrt20.spec: forward is broken: _tcsclen => msvcrt._tcsclen msvcrt20.spec: forward is broken: _tcscmp => msvcrt._tcscmp msvcrt20.spec: forward is broken: _tcscspn => msvcrt._tcscspn msvcrt20.spec: forward is broken: _tcsdec => msvcrt._tcsdec msvcrt20.spec: forward is broken: _tcsicmp => msvcrt._tcsicmp msvcrt20.spec: forward is broken: _tcsinc => msvcrt._tcsinc msvcrt20.spec: forward is broken: _tcslwr => msvcrt._tcslwr msvcrt20.spec: forward is broken: _tcsnbcnt => msvcrt._tcsnbcnt msvcrt20.spec: forward is broken: _tcsncat => msvcrt._tcsncat msvcrt20.spec: forward is broken: _tcsnccat => msvcrt._tcsnccat msvcrt20.spec: forward is broken: _tcsnccmp => msvcrt._tcsnccmp msvcrt20.spec: forward is broken: _tcsnccnt => msvcrt._tcsnccnt msvcrt20.spec: forward is broken: _tcsnccpy => msvcrt._tcsnccpy msvcrt20.spec: forward is broken: _tcsncicmp => msvcrt._tcsncicmp msvcrt20.spec: forward is broken: _tcsncmp => msvcrt._tcsncmp msvcrt20.spec: forward is broken: _tcsncpy => msvcrt._tcsncpy msvcrt20.spec: forward is broken: _tcsncset => msvcrt._tcsncset msvcrt20.spec: forward is broken: _tcsnextc => msvcrt._tcsnextc msvcrt20.spec: forward is broken: _tcsnicmp => msvcrt._tcsnicmp msvcrt20.spec: forward is broken: _tcsninc => msvcrt._tcsninc msvcrt20.spec: forward is broken: _tcsnset => msvcrt._tcsnset msvcrt20.spec: forward is broken: _tcspbrk => msvcrt._tcspbrk msvcrt20.spec: forward is broken: _tcsrchr => msvcrt._tcsrchr msvcrt20.spec: forward is broken: _tcsrev => msvcrt._tcsrev msvcrt20.spec: forward is broken: _tcsset => msvcrt._tcsset msvcrt20.spec: forward is broken: _tcsspn => msvcrt._tcsspn msvcrt20.spec: forward is broken: _tcsspnp => msvcrt._tcsspnp msvcrt20.spec: forward is broken: _tcsstr => msvcrt._tcsstr msvcrt20.spec: forward is broken: _tcstok => msvcrt._tcstok msvcrt20.spec: forward is broken: _tcsupr => msvcrt._tcsupr shell32.spec: forward is broken: StrNCpyW => shlwapi.StrNCpyW

1 0

RE: regsvr32 with multiple arguments
by Medland, Bill July 22, 2002

July 22, 2002

> -----Original Message----- > From: Andriy Palamarchuk [mailto:apa3a(a)yahoo.com] > Sent: Monday, July 22, 2002 7:41 AM > To: Medland, Bill; Wine devel (E-mail) > Subject: Re: regsvr32 with multiple arguments > > > > --- "Medland, Bill" <Bill.Medland(a)accpac.com> wrote: > > Did I miss something? > > > > Yesterday when I ran regsvr32 with multiple > > arguments it registered each > > one. Today it only registers the first. Yesterday > > it popped up a > > MessageBox with the result; today it puts the result > > on stdout. > > > > Does this make sense to anyone? > > Yes, the day before you used the native one, now you > are using the built-in. And didn't I feel a fool when I looked at the code and realised it (when I got home) > Thanks for the patch. My pleasure. > > Andriy > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - Feel better, live better > http://health.yahoo.com > Bill

1 0

Bug 434 Update/shot in the dark
by Rick Romero July 22, 2002

July 22, 2002

Referring to bug: http://bugs.winehq.com/show_bug.cgi?id=434 Under normal circumstances the mouse button doesn't get released in certain applications. These include, Macromedial Flash 5, MS Visual Foxpro 5/6, and Adobe Illustrator 8. I'm working with FoxPro 5. (I have a demo app in the bug report) In *MY* testing, I've noticed that the following command allows the mouse button to be released. wine --debugmsg +scroll,+event,+toolbar,+gdi,+heap vfp.exe If, while running under this command, I _hold_ the mouse button down - longer than a 'click', it will not be released. This seems like a timing issue to me, and started after functions were moved into the wineserver. Not that I know anything about how Wine is setup, but could the 'buttonup' be 'lost', or sent out of sequence, causing it to not be executed? And that sequence is slowed by the debug message enough, that a longer 'buttondown' duration is needed before the bug shows up? Where would be the best place to insert a delay, or extend the timing for a single click (So only the mouseclick function is 'slowed')? I'm sure this isn't the best bug report ever sent, but any suggestions would be appreciated. ;) Rick -- -- Rick Romero IT Manager Valeo, Inc. ph: 262.695.4841 Sussex, WI. fax: 262.695.4850 Rick(a)valeoinc.com

1 0

regsvr32 with multiple arguments
by Medland, Bill July 22, 2002

July 22, 2002

Did I miss something? Yesterday when I ran regsvr32 with multiple arguments it registered each one. Today it only registers the first. Yesterday it popped up a MessageBox with the result; today it puts the result on stdout. Does this make sense to anyone? Bill

2 1

Re: [Bug 889] - WINPOS_GetWinOffset() yields wrong offset
by Uwe Bonnes July 22, 2002

July 22, 2002

>>>>> "wine-bugs" == wine-bugs <wine-bugs(a)winehq.com> writes: wine-bugs> http://bugs.winehq.com/show_bug.cgi?id=889 ------- Additional wine-bugs> Comments From tony_lambregts(a)telusplanet.net 2002-07-21 09:59 wine-bugs> ------- I am not that familiar with wine internals either, wine-bugs> but if you submit a patch to wine_patches(a)winehq.com, I'm wine-bugs> sure that if there is something wrong with it someone will wine-bugs> point it out. No, it happens that patches get silently dropped... Bye -- Uwe Bonnes bon(a)elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------

3 3

configure broken
by Gerald Pfeifer July 22, 2002

July 22, 2002

The following patch has broken configure revision 1.320 date: 2002/07/19 03:16:51; author: julliard; state: Exp; lines: +210 -80 Gregg Mattinson <gm138242(a)scot.canada.sun.com> - X11/extensions/shape.h requires X11/Xutil.h. - X11/XKBlib.h requires X11/Xlib.h. - net/if.h requires sys/socket.h. - netinet/ip.h requires sys/socket.h and sys/in_systm.h. - resolv.h requires sys/socket.h. which now fails to properly set HAVE_NET_IF_H on FreeBSD 4.6, even though there we *do* have /usr/include/sys/socket.h. This is, because on BSD one must not #include <sys/socket.h> without having #included <sys/types.h> before. Something like the following should fix this problem: Index: configure.ac =================================================================== RCS file: /home/wine/wine/configure.ac,v retrieving revision 1.61 diff -u -3 -p -r1.61 configure.ac --- configure.ac 20 Jul 2002 20:17:13 -0000 1.61 +++ configure.ac 22 Jul 2002 06:58:49 -0000 @@ -983,7 +983,10 @@ AC_HEADER_STAT() dnl *** Check for net/if.h AC_CHECK_HEADERS(net/if.h,,, - [#if HAVE_SYS_SOCKET_H + [#if HAVE_SYS_TYPES_H + # include <sys/types.h> + #endif + #if HAVE_SYS_SOCKET_H # include <sys/socket.h> #endif]) Gerald

1 0

Re: Warcraft 3 : success and woes ( part 2 )
by Mark Hannessen July 21, 2002

July 21, 2002

on Sat, 20 Jul 2002 10:08:15 Jesse Allen Wrote: > The attachment seems to not have gotten to the list (yet?) > Could you send directly to me? The one with the diffed registry. Can't you just just "cut paste" it into a mail and send it to the mailinglist? I'd love to try it too ! ( and i guess many more ) Mark Hannessen

1 0

Re:IE 5.01 setup cant download? [ie5setup.exe]
by Sylvain Petreolle July 21, 2002

July 21, 2002

see wine bug #626 (http://bugs.winehq.com/show_bug.cgi?id=626) or at appdb #25 (http://appdb.winehq.com/appview.php?appId=25) ___________________________________________________________ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com

1 0

WINPOS_GetWinOffset (Better Patch)
by Anthony Tuininga July 21, 2002

July 21, 2002

With respect to this bug (#889) I followed the trail a little bit further as I noticed that "hot spots" on an image (like buttons) would fade in and out when the window wasn't at the top left of the screen. The trail led to the file dlls/x11drv/winpos.c. It is making a call to MapWindowPoints() which in turn calls WINPOS_GetWinOffset(). If I eliminate the call to MapWindowPoints() in the function expose_window() at line 290, (and restore the original version of windows/winpos.c) everything works beautifully. The window draws itself properly and the buttons work as expected. I am not all that familiar with Wine code, though, so can anyone think of a good reason why this code ought to be there? Should I submit a patch? And if so, can anyone point me to the method required for doing so? Thanks. Anthony

1 0

IE 5.01 setup cant download? [ie5setup.exe]
by Boris Reisig July 20, 2002

July 20, 2002

Has anyone actually gotten IE 5 or even IE6 working natively under WINE yet? [even under the latest CVS?] For the last few months, I tried running a clean wine installation [without windows] and run ie5seup.exe or even ie6setup.exe and each time it trys to download information, It *always* complains that "Setup was unable to download information about available installation sites" and if I ever go to advanced and add a proxy, wine CRASHES with ["Unhandled exception: page fault on write access to 0x00000000 in 32-Bit mode."] ["Symbol h_errno is invalid"] ["Symbol __strtol_internal is invalid"] ["Symbol hack_digit is invalid"] ["0x4174ad58 (RICHED32.DLL.DllGetVersion+0x32e7f4 in wininet.dll.so:"] The question is has anyone gotten internet explorer installed just from using ie5setup.exe or ie6setup.exe ??

1 0

CVS Broken fixed.
by Boris Reisig July 20, 2002

July 20, 2002

Ok, After I posted that message, I tried a "make depend" before my make and it seemed to have fixed the problem. This was *never* an issue before but it now works.

1 0

CVS broken?
by David D. Hagood July 20, 2002

July 20, 2002

I'm trying to rebuild Wine from a CVS pull of a few seconds ago (Sat Jul 20 13:58:37 UTC 2002), and I am getting the following error: make[2]: Entering directory `/usr/src/wine/tools/widl' gcc -c -I. -I. -I../../include -I../../include -I../../tools/wpp -g -O2 -Wall -mpreferred-stack-boundary=2 -D__WINE__ -D_REENTRANT -I/usr/X11R6/include -o header.o header.c In file included from header.c:36: ../../tools/wpp/y.tab.h:6: parse error before `wrc_sll_t' ../../tools/wpp/y.tab.h:6: warning: no semicolon at end of struct or union ../../tools/wpp/y.tab.h:7: warning: type defaults to `int' in declaration of `ull' ../../tools/wpp/y.tab.h:7: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:10: parse error before `cval' ../../tools/wpp/y.tab.h:10: warning: type defaults to `int' in declaration of `cval' ../../tools/wpp/y.tab.h:10: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:11: parse error before `*' ../../tools/wpp/y.tab.h:11: warning: type defaults to `int' in declaration of `marg' ../../tools/wpp/y.tab.h:11: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:12: parse error before `*' ../../tools/wpp/y.tab.h:12: warning: type defaults to `int' in declaration of `mtext' ../../tools/wpp/y.tab.h:12: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:13: parse error before `}' ../../tools/wpp/y.tab.h:13: warning: type defaults to `int' in declaration of `YYSTYPE' ../../tools/wpp/y.tab.h:13: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:59: parse error before `pplval' ../../tools/wpp/y.tab.h:59: warning: type defaults to `int' in declaration of `pplval' ../../tools/wpp/y.tab.h:59: warning: data definition has no type or storage class header.c: In function `is_object': header.c:180: `tOBJECT' undeclared (first use in this function) header.c:180: (Each undeclared identifier is reported only once header.c:180: for each function it appears in.) header.c: In function `is_local': header.c:189: `tLOCAL' undeclared (first use in this function) header.c: In function `is_callas': header.c:198: `tCALLAS' undeclared (first use in this function) make[2]: *** [header.o] Error 1 make[2]: Leaving directory `/usr/src/wine/tools/widl' make[1]: *** [widl] Error 2 make[1]: Leaving directory `/usr/src/wine/tools' make: *** [tools] Error 2 I've done a make clean to no avail.

4 5

Warcraft 3 : success and woes
by Jean-Baptiste Note July 20, 2002

July 20, 2002

Hello dear list, ** All the following has been teste on debian sid, XF4.0.2-17, latest wine CVS, on a Geforce2 with 2960 nvidia drivers. GL include were the standart mesa ones. system is pIII-smp, stock 2.4.18 kernel. ** I've followed with great interest a thread on wine-devel where Matthieu Foillard explained his problems trying to run warcraft3 under standard wine. I came across the same problem, so i though i could post here to explain what to do. This is really simple, and following Jesse Allen's recommendation found on http://www.winehq.com/hypermail/wine-devel/2002/07/0189.html The problem appears when you try to run warcraft 3 in opengl mode, regardless of whether or not you ran it with d3d and wineX previously. Warcraft is (following Jesse Allen's thought) trying to scan video modes available in OpenGL and gets stuck. However, after only one successful launch, the game creates the registry entries needed, and does not need to go through this detection cycle again. Question is, how to create those entries ? At your option * try to merge/use my user.reg attached below NOTE: i've still to look to the cd-key entry in my brother's win system to add it and be able to connect to battle.net =) You'll get into trouble certainly though, so read on. * try to do a minimal patch to do one successful run (warning, not very beautiful, we're not on wine-devel): You have to edit the function WINPOS_MinMaximize in the file wine/dlls/x11drv/winpos.c modify it so that it'll return SWP_NOSIZE | SWP_NOMOVE; anyway. compile & install, run. I dont know how this morbid modification affects other things. AFTER the successfull run, you can happily launch the game: launch it and relaunch it change resolution at your leasure BUT... If you do only one small change on window focusing... then it seems impossible for the game window to get the focus again on relaunch. All goes to the launching window ; i've tried with various window managers (kwin, pwm, blackbox) : same problem. So I thought : some information is written somewhere, that is not valid any more when i do a focus change. 1) could it be in user.reg/wine itself ? Deleting ~/.wine/user.reg will solve the problem. However, i've diffed two user.reg differently generated ; i'm at a loss to find any significant difference between the two. (the diff's attached) Furthermore, storing away user.reg and rm -Rf'ing ~/.wine, and copying back, with some focus change in between, leads to a non-focused game window. 2) could it be elsewhere ? IT IS ! As a matter of fact, building a fresh user.reg, then replacing it with an old saved one, without focus changes works flawlessly. I'm pretty sure something somewhere gets written with something like a window number in it. I'm pretty sure that's either in X itself or in the window manager. BTW, the results are the same wether i use wine in managed or unmanaged mode : the WM seems to be unaware of the created window. I don't know if I made myself clear ; i'd be glad to help you (*cough*) fix the bug for me, or (*cough* *cough*) give me some information/pointer as to how i could fix it. Regards, Jean-Baptiste Note

2 1

A windows clone without wine?
by Uwe Bonnes July 20, 2002

July 20, 2002

Hallo, http://slashdot.org/articles/02/07/19/2116234.shtml?tid=99 talks about China developping a windows clone. I can't imagine they don't use wine as a base. Does anybody know more? Bye -- Uwe Bonnes bon(a)elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------

1 0

Re: PATCH: Convert HTASK to a void*
by Michael Stefaniuc July 19, 2002

July 19, 2002

Hello, please disregard this patch, it has build problems in a "make clean" enviroment. An other problem is that WOWHandle32 and WOWHandle16 are needed in loader/task.c, but I suspect I'm not allowed to import wow32 into the ntdll? bye michael On Fri, Jul 19, 2002 at 01:07:16AM +0200, Michael Stefaniuc wrote: > this patch should close bug #502, but I have some questions (that's why > wine-devel is CC'ed): > - is it correct to use the HTASK_{16,32} macros or should I use > WOWHandle{16,32}? The difference is that the macros include a type > cast to the right handle. > - GetAppCompatFlags() works internaly with a HTASK16. Can I move the > implementation to GetAppCompatFlags16()? Would save a handle > conversion in GetAppCompatFlags16(). > > I'll close the bug report after the patch get's accepted. > > License: LGPL, X11 > Changelog: > Michael Stefaniuc <mstefani(a)redhat.com> > - Convert HTASK to a void* > - Fix HTASK_32 macro > > > bye > michael -- Michael Stefaniuc Tel.: +49-711-96437-199 System Administration Fax.: +49-711-96437-111 Red Hat GmbH Email: mstefani(a)redhat.com Hauptstaetterstr. 58 http://www.redhat.de/ D-70178 Stuttgart

1 1

Wine CVS does *not* compile anymore. [wine/tools/widl//header.c]
by Boris Reisig July 19, 2002

July 19, 2002

Wine stopped compiling a fews days ago or maybe a week. I download the CVS every few days and I noticed that it cant compile anymore. Here make[1]: Entering directory `/root/wine/tools' make[2]: Entering directory `/root/wine/tools/wpp' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/root/wine/tools/wpp' make[2]: Entering directory `/root/wine/tools/widl' gcc -c -I. -I. -I../../include -I../../include -I../../tools/wpp -g -O2 -Wall -mpreferred-stack-boundary=2 -D__WINE__ -D_REENTRANT -I/usr/X11R6/include -o header.o header.c In file included from header.c:36: ../../tools/wpp/y.tab.h:10: parse error before `wrc_sll_t' ../../tools/wpp/y.tab.h:10: warning: no semicolon at end of struct or union ../../tools/wpp/y.tab.h:11: warning: type defaults to `int' in declaration of `ull' ../../tools/wpp/y.tab.h:11: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:14: parse error before `cval' ../../tools/wpp/y.tab.h:14: warning: type defaults to `int' in declaration of `cval' ../../tools/wpp/y.tab.h:14: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:15: parse error before `*' ../../tools/wpp/y.tab.h:15: warning: type defaults to `int' in declaration of `marg' ../../tools/wpp/y.tab.h:15: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:16: parse error before `*' ../../tools/wpp/y.tab.h:16: warning: type defaults to `int' in declaration of `mtext' ../../tools/wpp/y.tab.h:16: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:17: parse error before `}' ../../tools/wpp/y.tab.h:17: warning: type defaults to `int' in declaration of `yystype' ../../tools/wpp/y.tab.h:17: warning: data definition has no type or storage class ../../tools/wpp/y.tab.h:66: parse error before `pplval' ../../tools/wpp/y.tab.h:66: warning: type defaults to `int' in declaration of `pplval' ../../tools/wpp/y.tab.h:66: warning: data definition has no type or storage class header.c: In function `is_object': header.c:180: `tOBJECT' undeclared (first use in this function) header.c:180: (Each undeclared identifier is reported only once header.c:180: for each function it appears in.) header.c: In function `is_local': header.c:189: `tLOCAL' undeclared (first use in this function) header.c: In function `is_callas': header.c:198: `tCALLAS' undeclared (first use in this function) make[2]: *** [header.o] Error 1 make[2]: Leaving directory `/root/wine/tools/widl' make[1]: *** [widl] Error 2 make[1]: Leaving directory `/root/wine/tools'

1 0

Problem with wcmd
by Steven Edwards July 19, 2002

July 19, 2002

This patch http://cvs.winehq.com/patch.py?id=1025909276607367637873725 results in this under mingw with gcc 2.95.c and 3.1 gcc -c -I. -I. -I../../include -I../../include -D__MINGW__ -D_WINDOWS -DWINE_NO WINSOCK -Wall -mpreferred-stack-boundary=2 -DSTRICT -DNONAMELESSUNION -DNONAMELE SSSTRUCT -D_REENTRANT -o directory.o directory.c directory.c: In function `WCMD_filesize64': directory.c:369: `uint' undeclared (first use in this function) directory.c:369: (Each undeclared identifier is reported only once directory.c:369: for each function it appears in.) directory.c:369: parse error before `r' directory.c:374: `i' undeclared (first use in this function) directory.c:378: `r' undeclared (first use in this function) make: *** [directory.o] Error 1 Any ideas? Thanks Steven __________________________________________________ Do You Yahoo!? Yahoo! Autos - Get free new car price quotes http://autos.yahoo.com

1 0

Preliminary patch for Bug 675 - LVM_SCROLL
by Guy L. Albertelli July 19, 2002

July 19, 2002

The attached patch implements LVM_SCROLL. While not many programs use it, implementing it required changing how scrollbars were handled for all of Listview. This new implementation is much more like the native. The scrollbars mimic the range of pixels that they cover. This allows the specification of a pixel level scroll which is critical to LVM_SCROLL. The only exception (and the native does this also) is for LVS_LIST displays where the scrollbar is related to the number of columns to be displayed. Before submitting to wine-patches, I am interested in feedback and any discrepancies with how the native controls work (-dll commctrl,comctl32=n). Thanks, Guy Albertelli <<galberte(a)neo.lrun.com>>

1 0

Re: wine/files dos_fs.c smb.c smb.h
by Rein Klazes July 19, 2002

July 19, 2002

On Thu, 18 Jul 2002 22:17:19 -0500, you wrote: > > Log message: > Mike McCormack <mikem(a)codeweavers.com> > First go at reading directories on public SMB shares. > > Patch: http://cvs.winehq.com/patch.py?id=1027048639509081130455346 This breaks Forte Agent, looping endlessly around a FindNextFileA(). It is caused by the SetLastError(ERROR_NO_MORE_FILES) that is lost in the final HeapUnlock call. A quick fix is attached. files/ : dos_fs.c Repair SetLastError in FindNextFileA. Rein. -- Rein Klazes rklazes(a)xs4all.nl

1 0

Re: Errors running winapi_extract --stub-statistics
by Gregg Mattinson July 19, 2002

July 19, 2002

I think this is because the module name is no longer in the .spec file. Lines 71-73 of winapi_extract look for "name" in the .spec file, which no longer exists. Should we be using the file name as the module name? Gregg Mattinson Co-op Developer Sun Microsystems of Canada >From: Francois Gouget <fgouget(a)free.fr> >To: wine-devel(a)winehq.com >cc: Patrik Stridvall <ps(a)leissner.se> >Subject: Errors running winapi_extract --stub-statistics >Date: Fri, 19 Jul 2002 00:19:15 -0700 (PDT) > > >Hi, > > >I was trying to update the API statistics but I got the following >errors: > >$ ./tools/winapi/winapi_extract --stub-statistics >Use of uninitialized value in hash element at >./tools/winapi/winapi_extract line 97. >Use of uninitialized value in hash element at >./tools/winapi/winapi_extract line 97. >... > >There is quite a few of these. So I tentatively modified the line as >follows: > $module2entries{$module} = $entries if (defined $module); > >But then I got: >$ ./tools/winapi/winapi_extract --stub-statistics >controls/button.c (file 1 of 796)Not a HASH reference at >tools/winapi_check/winapi_parser.pm line 32. > >So obviously there is another problem or my previous 'fix' was not so >good. Any ideas? > > >-- >Francois Gouget fgouget(a)free.fr http://fgouget.free.fr/ > In a world without fences who needs Gates? >

1 0

Patch for memory-mapping problem -- See VirtualQuery post
by Max July 19, 2002

July 19, 2002

Well, I took off the dirty hack on virtual.c and put inside something that seems to me much more like a real solution. Took off in executable mapping VPROT_WRITE and VPROT_WRITECOPY flags and added VPROT_EXEC; that looks much more close to win2k mapping. The only difference now is in Type field, wine maps as MEM_PRIVATE and win2k as MEM_IMAGE (I guess that's the right one, but no time now to check. Here the attached patch.... any comment appreciated :-) Regards Max

1 0

Errors running winapi_extract --stub-statistics
by Francois Gouget July 19, 2002

July 19, 2002

Hi, I was trying to update the API statistics but I got the following errors: $ ./tools/winapi/winapi_extract --stub-statistics Use of uninitialized value in hash element at ./tools/winapi/winapi_extract line 97. Use of uninitialized value in hash element at ./tools/winapi/winapi_extract line 97. ... There is quite a few of these. So I tentatively modified the line as follows: $module2entries{$module} = $entries if (defined $module); But then I got: $ ./tools/winapi/winapi_extract --stub-statistics controls/button.c (file 1 of 796)Not a HASH reference at tools/winapi_check/winapi_parser.pm line 32. So obviously there is another problem or my previous 'fix' was not so good. Any ideas? -- Francois Gouget fgouget(a)free.fr http://fgouget.free.fr/ In a world without fences who needs Gates?

1 0

Re: AutoCAD2000 again and CreateFiber
by Eric Pouech July 19, 2002

July 19, 2002

> Alle 21:40, giovedì 18 luglio 2002, Eric Pouech ha scritto: > > > TEB: Thread execution block... it's the descriptor of any running thread > > in the system (see include/thread.h) > > on NT, the TEB starts with a thread information block > > so if I did understand, in NT fibers are mapped to threads descriptors > directly.... not really... fibers descriptors are chained in a TEB so that the thread (which is the sole execution unit seen by the scheduler) can arrange its own scheduling of fibers A+ --------------- Eric Pouech (http://perso.wanadoo.fr/eric.pouech/) The future will be better tomorrow, Vice President Dan Quayle ------------------------------------------ Faites un voeu et puis Voila ! www.voila.fr

1 0