April 2013 - Wine-Devel - list.winehq.org

Re: [AppDB] version: Only display comments section in case version has maintainers
by Rosanne DiMesio April 29, 2013

April 29, 2013

> > So volunteer to be a maintainer. > > > > > That is all good and well, but most of the time I check the wine page > before I buy a game. If there are no maintainers and this is active, > there will be no comments, I will be unsure about the likelihood of it > working. Reports would still be helpful, but most of the time, the > majority of the information ends up in the comments section. > All the more reason to disable comments. The information belongs in test reports. Comments get deleted periodically, test reports don't. -- Rosanne DiMesio <dimesio(a)earthlink.net>

1 0

[AppDB]: Recent UCE/Spam waves in AppDBs comments
by Joerg Schiermeier April 28, 2013

April 28, 2013

Hi list, hello Rosanne, I just saw again a lot of spam posted into the AppDB. Thanks to Rosanne who deleted this senseless and useless mails rapidly. But isn't there a real solution for this problem? OK, to kill this guys maybe the best way, but than I will get seriously problems. :-) So please, isn't there a way to set up a filter - for user names or, with more effect, for IPs of this bad guys ISPs? I know, this will cause 'collateral damage' but if it helps to prevent the next wave of spam - I think it's OK. This maybe a task for AppDBs administrator, isn't it? -- Kindly regards Joerg Schiermeier Bielefeld/Germany

2 1

Re: winex11.drv: Fixed XInput2 errors with mislabeled mice axis.
by Dmitry Timoshkov April 28, 2013

April 28, 2013

"Cope, Christopher Edward" <ccope3(a)utk.edu> wrote: > @@ -1638,16 +1636,14 @@ static void X11DRV_RawMotion( XGenericEventCookie *xev ) > if (XIMaskIsSet( event->valuators.mask, class->number )) > { > double val = *values++; > - if (class->label == x11drv_atom( Rel_X ) || > - (!class->label && class->number == 0 && class->mode == XIModeRelative)) > + if (class->label == x11drv_atom( Rel_X ) || class->mode == XIModeRelative) > { > input.u.mi.dx = dx = val; > if (class->min < class->max) > input.u.mi.dx = val * (virtual_screen_rect.right - virtual_screen_rect.left) > / (class->max - class->min); > } > - else if (class->label == x11drv_atom( Rel_Y ) || > - (!class->label && class->number == 1 && class->mode == XIModeRelative)) > + else if (class->label == x11drv_atom( Rel_Y ) || class->mode == XIModeRelative) > { > input.u.mi.dy = dy = val; > if (class->min < class->max) How is this supposed to distinguish motion in X and Y direction? -- Dmitry.

1 0

Re: qedit/tests: Improve test messages
by Marvin April 27, 2013

April 27, 2013

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=25328 Your paranoid android. === W2KPROSP4 (32 bit mediadet) === mediadet.c:149: Test failed: CoCreateInstance failed: 80040154 mediadet: unhandled exception c0000005 at 00401588 === W2K8SE (32 bit mediadet) === mediadet.c:149: Test failed: CoCreateInstance failed: 80040154 mediadet: unhandled exception c0000005 at 00401588

1 0

Re: qedit/tests: Improve test messages
by Marvin April 27, 2013

April 27, 2013

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=25328 Your paranoid android. === W2KPROSP4 (32 bit mediadet) === mediadet.c:149: Test failed: CoCreateInstance failed: 80040154 mediadet: unhandled exception c0000005 at 00401588 === W2K8SE (32 bit mediadet) === mediadet.c:149: Test failed: CoCreateInstance failed: 80040154 mediadet: unhandled exception c0000005 at 00401588

1 0

[AppDB]: Recent UCE/Spam waves in AppDBs comments
by Joerg Schiermeier April 27, 2013

April 27, 2013

Hi list, hello Rosanne, I just saw again a lot of spam posted into the AppDB. Thanks to Rosanne who deleted this senseless and useless mails rapidly. But isn't there a real solution for this problem? OK, to kill this guys maybe the best way, but than I will get seriously problems. :-) So please, isn't there a way to set up a filter - for user names or, with more effect, for IPs of this bad guys ISPs? I know, this will cause 'collateral damage' but if it helps to prevent the next wave of spam - I think it's OK. This maybe a task for AppDBs administrator, isn't it? -- Kindly regards Joerg Schiermeier Bielefeld/Germany

1 0

Re: netapi32: Add stub for NetGetAnyDCName
by Christian Costa April 27, 2013

April 27, 2013

Hi, + FIXME("(%s, %s, %p) stub!\n", debugstr_w(servername), + debugstr_w(domainname), bufptr); + return ERROR_NO_SUCH_DOMAIN; +} Please use 4 spaces indentation as the rest of the file. Christian Le 27/04/2013 14:05, Ruslan Kabatsayev a écrit : > Hello, > > This patch adds a stub for netapi32!NetGetAnyDCName(), which is needed > for e.g. KDE's dolphin to launch first time. I've done it similarly to > already present NetGetDCName() stub, but with another error code > return, which is among valid ones listed in MSDN. > > Regards, > Ruslan > >

2 1

Re: user32: SetTimer should respect the minimum and maximum timeout limits (try 2).
by Alexandre Julliard April 26, 2013

April 26, 2013

"Erich E. Hoover" <ehoover(a)mymail.mines.edu> writes: > So, this particular patch fixes the minimum and maximum timeout limits > for SetTimer, which has a significant impact on any application using > SetTimer to render video (Bug #32489). The old minimum timeout (55 > ms) is nowhere near short enough to render video at 24 FPS, causing > "choppy" video behavior in a variety of Silverlight apps. Even though > MSDN indicates that the minimum timeout should be 10 ms, I'm using the > value established from the included tests instead (15 ms). That doesn't mean you can change the constant. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: msvcrt.h: Use inline function to forward hypot to _hypot.
by Alexandre Julliard April 26, 2013

April 26, 2013

Jacek Caban <jacek(a)codeweavers.com> writes: > This fixes compiling msvcp* DLLs with recent mingw-w64 trunk version. > Previous versions had a separated library that contained forwards from > underscored functions to non-underscored, which I believe made using > hypot work. Those were currently moved directly to msvcr* import libs, > which we don't use in favour of our our own ones. Don't you need to do that for the other functions too? -- Alexandre Julliard julliard(a)winehq.org

2 3

Re: [PATCH 1/2]vbscript: Implemented builtin function CInt(try 3)
by Jacek Caban April 26, 2013

April 26, 2013

Hi Zhan, It's better, thanks, but still needs more work. On 04/25/13 23:37, Zhan Jianyu wrote: > } > > + > + While we're at this, please put more attention into whitespace changes, esp. useless ones. > static HRESULT to_double(VARIANT *v, double *ret) > { > switch(V_VT(v)) { > @@ -217,6 +221,27 @@ static HRESULT to_string(VARIANT *v, BSTR *ret) > return S_OK; > } > > + > +static HRESULT banker_rounding(double dbval, int *result_val) > +{ > + double frac_part; > + double int_part; > + > + *result_val = round(dbval); This has two problems: - you don't handle values that are out of int range by assigning double value to int - round is not portable. As I mentioned you before, Wine needs to be C89 compatible. If we need some features that are not part of C89, we need to be careful about that and it often requires things like configure checks. In case of round, replacing it with floor(x+0.5) does the trick pretty well. Cheers, Jacek

2 3

Names with particles on South Africa and Namibia should be in the particle on the AUTHORS file.
by Tae Wong April 26, 2013

April 26, 2013

You have posted a message to show how surnames with particles of South Africa and Namibia show in the credits, like van Schayck listed in S and not under V: For example, van Schayck is under S and not in V. Note that the name of the file is in all capitals. Here is a correction of the va section, with van Schyack placed on the letter by letter system. The file name is AUTHORS. It is a file in all capitals and the file content contains just the heading and some names of the developers. Note that the file is out of date. Vainer, Moshe Valoska, Hleb Valtonen, Hannu Vance, Carroll Vanek, Tomas van Schaik, Carl Vaughn, Charles

1 0

Re: [PATCH 1/2] wined3d: Set GL_NONE for glReadBuffer / glDrawBuffer on FBO initialization.
by Henri Verbeet April 26, 2013

April 26, 2013

Seems ok, though a small comment explaining the issue this patch fixes probably wouldn't hurt. On 25 April 2013 20:43, Matteo Bruni <mbruni(a)codeweavers.com> wrote: > + if (target == GL_READ_FRAMEBUFFER) > + context_bind_fbo(context, GL_DRAW_FRAMEBUFFER, draw_binding ? &draw_binding : 0); > + else > + context_bind_fbo(context, GL_READ_FRAMEBUFFER, read_binding ? &read_binding : 0); > I don't think using 0 here is strictly wrong, but a proper NULL would probably be clearer. As a followup, I think we can actually get rid of the glGenFramebuffers() in context_bind_fbo() these days and just pass a GLuint instead of a pointer. The only place left that actually creates FBOs should be context_apply_fbo_entry().

2 2

Re: [PATCH 2/2]vbscript: Implemented builtin function CBool(try 3)
by Marvin April 25, 2013

April 25, 2013

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=25302 Your paranoid android. === W2KPROSP4 (32 bit) === No test summary line found === WXPPROSP2 (32 bit) === No test summary line found === WXPX64 (32 bit) === No test summary line found === W2K3R2SESP2 (32 bit) === No test summary line found === WVISTAX64 (32 bit) === No test summary line found === W2K8SE (32 bit) === No test summary line found === W7PROX64 (32 bit) === No test summary line found === TEST64_W7SP1 (32 bit) === No test summary line found === WXPX64 (64 bit) === No test summary line found === WVISTAX64 (64 bit) === No test summary line found === W7PROX64 (64 bit) === No test summary line found === TEST64_W7SP1 (64 bit) === No test summary line found

1 0

Re: [PATCH 1/2]vbscript: Implemented builtin function CInt(try 3)
by Marvin April 25, 2013

April 25, 2013

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at http://testbot.winehq.org/JobDetails.pl?Key=25301 Your paranoid android. === W2KPROSP4 (32 bit) === No test summary line found === WXPPROSP2 (32 bit) === No test summary line found === WXPX64 (32 bit) === No test summary line found === W2K3R2SESP2 (32 bit) === No test summary line found === WVISTAX64 (32 bit) === No test summary line found === W2K8SE (32 bit) === No test summary line found === W7PROX64 (32 bit) === No test summary line found === TEST64_W7SP1 (32 bit) === No test summary line found === WXPX64 (64 bit) === No test summary line found === WVISTAX64 (64 bit) === No test summary line found === W7PROX64 (64 bit) === No test summary line found === TEST64_W7SP1 (64 bit) === No test summary line found

1 0

Re: [PATCH 1/7] wined3d: Add a new structure for for d3d limits and other info
by Stefan Dösinger April 25, 2013

April 25, 2013

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Please ignore this patch. I figured that my series might collide with Henri's, so I canceled the send process. And indeed there are conflicts, so I'll resend my patches rebased on top of Henri's. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJReSS/AAoJEN0/YqbEcdMwElkP/AiDEqVSaMxTW+sOaQava97g a0cOBpHTU+lInUuUXIS2WVe65D+IhkdYJHnMIrSUVdquvT1x+pLVgr+2J4jczFX7 /9Ay0gAjMVbKsKIYO4tvOQgSru/RdAljTg6uaIw+qTDrHZvQLW/sJu3JcbAp0GW7 9pGEzPvRr6hNsOyXE+DQlTEsT3vkbEUTRr01j4+znF50laYV2s3e5saZHyXULyY8 ObEf3n2ppQgcO4keQg7wAPLydw+xiNcYOw9724fh/xyezj8MXoT1CDHeio7yPfhg xp76kNWzNERQcWaDT7QXwuWLRXy5H3VodWm4PEMXvqXyxkJJycm2jECvTOTjrrke iswKGqh9n0gTWQjse2eUY/fKxpjhh/ySxDcJq093swHHbvrCngL8Q5dYu/Ch3cFu JbLu4pHla3iAmJKftVTT/iRq6vwsLB7tzloCoA7e8T+GFmsA39RPFI6zttCIoA60 kui5a4Ofd6/sGMFaqg2VBK+2crGJzVzN6VRvglg63A0hNr0UGbkFC/6iQK8FzxyA A+uPGr5Xrd/vGpKZksMMH68JiK5kYXm+fsiVI1F1rcAcfdh6STQBoThcig1N/HXu fA8daluv4+PgQ9RhgzlioBsVFGxkZ1FbM8XjKlcnKQb0ZK3DXLHLEzspvmBnr3Pi MK94F9BvqMDa6Wi57sgT =Wh/i -----END PGP SIGNATURE-----

1 0

Re: [0/4] Improve wineconsole and kernel32
by Frédéric Delanoy April 25, 2013

April 25, 2013

On Wed, Apr 24, 2013 at 9:15 AM, Hugh McMaster < hugh.mcmaster(a)masterindexing.com> wrote: > This series of four patches will improve various three functions in > kernel32: > > * GetConsoleFontSize > * GetCurrentConsoleFont > * GetLargestConsoleWindowSize > > This is achieved by moving logical calculations to wineconsole itself. > kernel32.dll only receives the final values. > > The first and second patches should be applied to source before compiling > Wine. If this is not done, the compiler will exit with errors. (The first > is a patch for server/protocol.def and requires tools/make_requests to be > run). > After each patch, Wine should be able to compile correctly (e.g. for regression testing) If not, you should split your patches differently IMO. Frédéric

2 1

Wine Gecko 2.21-beta1
by Jacek Caban April 25, 2013

April 25, 2013

Hi all, As some of you might have noticed, the final Wine Gecko 2.20 was never been released, although it was scheduled for about three weeks ago. This is mostly due to my lack of time, combined with the fact that part of that time I was busy with some Gecko work that would be nice to have in Wine. Being 3 weeks late means that we also have 3 weeks until the next Firefox release, so we may just wait a bit longer and do another release based on newer upstream code base. This way I may use the new beta to include some of the changes that I did lately, which would be too risky to go straight to release. Those new improvements contain, among others, a fix for Adobe CS4 products installers. In this beta, the testing is easier than ever. Our auto installer knows about the beta which, combined with the fact that we cache downloaded packages now, means that the attached Wine patch is all you need to comfortably test the new package. Just apply the patch you the Wine tree and everything should work. All tests are appreciated. Thanks, Jacek

1 0

Re: [PATCH 2/5] wined3d: Introduce a wined3d_vertex_pipe_ops structure.
by Rico Schüller April 25, 2013

April 25, 2013

On 25.04.2013 09:59, Henri Verbeet wrote: > -static HRESULT shader_arb_alloc(struct wined3d_device *device, const struct fragment_pipeline *fragment_pipe) > +static HRESULT shader_arb_alloc(struct wined3d_device *device, const struct wined3d_vertex_pipe_ops *vertex_pipe, > + const struct fragment_pipeline *fragment_pipe) > { > struct shader_arb_priv *priv = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*priv)); > struct fragment_caps fragment_caps; > - void *fragment_priv; > + void *vertex_priv, *fragment_priv; > + > + if (!(vertex_priv = vertex_pipe->vp_alloc(&arb_program_shader_backend, priv))) > + { > + ERR("Failed to initialize vertex pipe.\n"); > + HeapFree(GetProcessHeap(), 0, priv); > + return E_FAIL; > + } > > if (!(fragment_priv = fragment_pipe->alloc_private(&arb_program_shader_backend, priv))) > { > ERR("Failed to initialize fragment pipe.\n"); > + fragment_pipe->free_private(device); Shouldn't that vertex_pipe->vp_free(device)? > HeapFree(GetProcessHeap(), 0, priv); > return E_FAIL; > }

2 1

Clang static analyzer results / wine-1.5.28-66-g6899279
by Austin English April 25, 2013

April 25, 2013

With wine-1.5.20 and clang 3.2, the test suite is in the same state on my Fedora 18 machine as gcc-4.7.2 llvm version: git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk(a)17976891177308-0d34-0410-b5e… clang version: git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk(a)17977191177308-0d34-0410-b5e6… ./configure --disable-tests was used to reduce noise [austin(a)localhost ~]$ sha1sum scan-build-2013-04-18-2.tar.bz2 51e28c96a04ebe9ef937678149f9e7e3ed4cb20f scan-build-2013-04-18-2.tar.bz2 [austin(a)localhost ~]$ du -h scan-build-2013-04-18-2.tar.bz2 35M scan-build-2013-04-18-2.tar.bz2 http://www.mediafire.com/?xwb05d6er0aclfe -- -Austin

5 7

Re: [PATCH 1/2] gdi32: Clip font glyphs to fit within text metrics. (try 2)
by Sam Edwards April 24, 2013

April 24, 2013

This series has been waiting in the queue for a few days now. Does this need further discussion, or can it be committed? Thanks, Sam On 04/20/2013 08:08 AM, Sam Edwards wrote: >

1 0

Re: [PATCH] kernel32: Actually return a PERFORMANCE_INFORMATION structure in K32GetPerformanceInfo (try 2)
by Christian Costa April 24, 2013

April 24, 2013

2013/4/24 James Eder <jimportal(a)gmail.com> > This version should either pass or skip on W2KPROSP4. > --- > dlls/kernel32/cpu.c | 23 ++++++++++++++++++----- > dlls/psapi/tests/psapi_main.c | 36 ++++++++++++++++++++++++++++++++++++ > 2 files changed, 54 insertions(+), 5 deletions(-) > > diff --git a/dlls/kernel32/cpu.c b/dlls/kernel32/cpu.c > index 0ebf8f3..124e5c0 100644 > --- a/dlls/kernel32/cpu.c > +++ b/dlls/kernel32/cpu.c > @@ -216,16 +216,29 @@ BOOL WINAPI IsProcessorFeaturePresent ( > */ > BOOL WINAPI K32GetPerformanceInfo(PPERFORMANCE_INFORMATION info, DWORD > size) > { > - NTSTATUS status; > + MEMORYSTATUSEX mem_status; > > TRACE( "(%p, %d)\n", info, size ); > > - status = NtQuerySystemInformation( SystemPerformanceInformation, > info, size, NULL ); > - > - if (status) > + if(size < sizeof(PERFORMANCE_INFORMATION)) > { > - SetLastError( RtlNtStatusToDosError( status ) ); > + SetLastError(ERROR_BAD_LENGTH); > return FALSE; > } > + > + mem_status.dwLength = sizeof(mem_status); > + if (!GlobalMemoryStatusEx( &mem_status )) > + return FALSE; > + > + memset(info, 0, sizeof(PERFORMANCE_INFORMATION)); > + > + info->cb = sizeof(PERFORMANCE_INFORMATION); > + info->CommitLimit = min((mem_status.ullTotalPageFile / > system_info.PageSize), MAXDWORD); > + info->PhysicalTotal = min((mem_status.ullTotalPhys / > system_info.PageSize), MAXDWORD); > + info->PhysicalAvailable = min((mem_status.ullAvailPhys / > system_info.PageSize), MAXDWORD); > + info->PageSize = system_info.PageSize; > + > + FIXME("stub\n"); > + > Hi James, That would be better to change the trace at the beginning by FIXME( "(%p, %d): semi-stub\n", info, size ); or FIXME( "(%p, %d): partial stub\n", info, size ); instead of adding another fixme (which is not really correct since it's not a stub). Christian

2 3

Re: msvcr110.dll: add a stub for crtGetShowWindowMode (try 2)
by Alexandre Julliard April 24, 2013

April 24, 2013

Austin English <austinenglish(a)gmail.com> writes: > Fixes http://bugs.winehq.org/show_bug.cgi?id=33195 > > try 2: return SW_SHOWWINDOW instead of SW_HIDE It's not much harder to return the correct value. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH 1/2] shell32: Add a semi-stub for SHGetStockIconInfo
by Nikolay Sivov April 24, 2013

April 24, 2013

On Wed, Apr 24, 2013 at 6:38 PM, Detlef Riekenberg <wine.dev(a)web.de> wrote: > -- > By by ... Detlef > --- > dlls/shell32/iconcache.c | 42 > ++++++++++++++++++++++++++++++++++++++++++ > dlls/shell32/shell32.spec | 1 + > 2 files changed, 43 insertions(+), 0 deletions(-) > > diff --git a/dlls/shell32/iconcache.c b/dlls/shell32/iconcache.c > index 637dbca..df6675d 100644 > --- a/dlls/shell32/iconcache.c > +++ b/dlls/shell32/iconcache.c > @@ -46,6 +46,8 @@ > > WINE_DEFAULT_DEBUG_CHANNEL(shell); > > +static const WCHAR shell32dll[] = > {'\\','s','h','e','l','l','3','2','.','d','l','l',0}; > + > Please put this in function that needs it.

1 0

Re: [PATCH 4/5] d3d9/tests: Don't test for equality in d3d9's depth_blit_test
by Henri Verbeet April 24, 2013

April 24, 2013

On 24 April 2013 11:29, Stefan Dösinger <stefan(a)codeweavers.com> wrote: > This makes the test pass on nv40 GPUs on Linux. I'm not sure if testing > equality was intentional or an accident, if it was intentional please > ignore this patch. > I don't quite remember, but probably not. Arguably the nicer way to fix it is to change the z-value for quad1 to 0.33f though.

1 0

Re: oledb32: Implement DataConvert DBTYPE_BOOL->VARIANT
by Jacek Caban April 24, 2013

April 24, 2013

On 04/24/13 10:41, Alistair Leslie-Hughes wrote: > + case DBTYPE_BOOL: > + V_VT(v) = VT_BOOL; > + V_BOOL(v) = *(BOOL*)src; You're mixing BOOL and VARIANT_BOOL here. This can't work, they even have a different size. From your test I guess that you meant to cast src to VARIANT_BOOL*. Cheers, Jacek

1 0