September 2013 - Wine-Devel

Re: [PATCH 1/5] use a correct timeout in test_waittxempty
by Dmitry Timoshkov Sept. 5, 2013

Sept. 5, 2013

Wolfgang Walter <wine(a)stwm.de> wrote: > When we send 17 bytes with 150 baud, no parity, one stop bit then > we need to wait at least 17*10/150 seconds > 1000 ms Under Windows with both real COM-port and USB-serial cable this test takes no longer than 890 ms, usually it's even shorter like 875 ms. Testbot VMs also don't fail this test. If under Wine it takes > 1000 ms for you then probably there is a bug somewhere. -- Dmitry.

2 3

Re: D3D command stream patches for testing
by Prot Secret Sept. 5, 2013

Sept. 5, 2013

Hi, I am interested in your work, but after patching wine171 of this patch and enabled csmt, i have seen this in SC2 http://postimg.org/gallery/1w8y6jbg I use nvidia GTX 680 with proprietary i386 nvidia driver 319.49. Where I could be wrong, or what else can be set that would be normalized image using the patch? Thanks!

2 1

RE: D3D command stream patches for testing
by Vedran Rodic Sept. 4, 2013

Sept. 4, 2013

Hello, I was not subscribed to wine-devel, so I can't reply to Stefan's mail directly, but here are some of my observations with Dota 2 on an Intel HD4000 GPU. Intel Mesa driver doesn't seem to like glBufferSubData in a way this patchset uses it. I get many many messages like these per frame when I enable INTEL_DEBUG=perf performance feedback of the Intel Mesa driver: Using a blit copy to avoid stalling on 588b glBufferSubData() to a busy buffer object. Using a blit copy to avoid stalling on 480b glBufferSubData() to a busy buffer object. Using a blit copy to avoid stalling on 480b glBufferSubData() to a busy buffer object. Using a blit copy to avoid stalling on 1104b glBufferSubData() to a busy buffer object. Using a blit copy to avoid stalling on 252b glBufferSubData() to a busy buffer object. Using a blit copy to avoid stalling on 204b glBufferSubData() to a busy buffer object. Using a blit copy to avoid stalling on 192b glBufferSubData() to a busy buffer object. Using a blit copy to avoid stalling on 192b glBufferSubData() to a busy buffer object. Using a blit copy to avoid stalling on 12b glBufferSubData() to a busy buffer object. Using a blit copy to avoid stalling on 12b glBufferSubData() to a busy buffer object. I'm not sure how much this really impacts performance, but even with my Dota 2 wine perf hacks [1] it's not faster than current Wine git (performance is very similar). On what hardware did you test this patchset? [1]: http://vrodic.blogspot.com/2013/08/dota-2-wine-optimization-for-intel-gpus.…

2 1

Re: [PATCH 3/5] wined3d: Don't set WINED3DUSAGE_RENDERTARGET on the front buffer.
by Stefan Dösinger Sept. 4, 2013

Sept. 4, 2013

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Am 2013-09-04 08:56, schrieb Henri Verbeet: > We never render directly to the front buffer, and in case of e.g. a > P8 front buffer, we would fail surface creation if we were to > enforce format restrictions. This patch uncovers a problem I am not quite sure how to solve. We set the frontbuffer as render target in wined3d_device_init_3d if there's no backbuffer, i.e., when ddraw is used. In theory this doesn't matter because we're not rendering to it, just blitting. Similarly, dlls/ddraw/device.c calls set_render_target to set the ddraw frontbuffer on release. The call fails now, but that doesn't cause any visible problems yet. There is a zombie wined3d surface left, but it goes away on ddraw shutdown or when a new ddraw IDirect3DDevice is created. However, when we create wined3d textures for standalone surfaces, the ddraw surface isn't destroyed until the wined3d surface goes away because we're waiting for the callback. This keeps the ddraw surface alive as well. The ddraw tests notice this because keeping the IDirectDrawSurface alive means keeping an IDirect3DDevice1 alive as well. The device holds a reference to the attached viewport(s), which triggers a failure in the ddraw1 tests. The test failure was lingering before, I fixed this by adding a similar set_render_target call to ddraw_surface_release_iface_destroy. See the attached patches for reference. The easiest solution seems to create a separate dummy render target that ddraw can use to unset application targets. That still leaves the problem that we're initializing wined3d with an invalid render target now. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.20 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJSJ6NiAAoJEN0/YqbEcdMwqEsP/3We5UyaUsuUmh8DuqpUDozy OPFdfg0defIGBB3xdcRPYtwz265jsThxK8ek/vb24E1fJXJsm7zE1CJq1jUh/Beo X1zkewvL29WpriNvh11AW0+FIrE2XMwmr/5ekHQMXM4Evv2aRWG6zmWj0Wv1zR+x EcFgHE7J6boOIHtogPoge8KHiVULjxm91Dpnariab0YzUNDUfaHUXopWH0N4hb3T W5ds4cnHLOapOk8ihDfyAcBXOH4JlvConKKG4zDtbcuovp01yLR+eF03m/eBqt5m 0x3VpPyyaIJpFtOERAi9CqbN0Xuy3wOLmtgHsjy8Qh1wKr/I+DmkuakcsJYELmrY Ou7n+fDRceJyxdqP8vGtwlsP7Skkyxet/KYt7xbWsMcIcMjFDv6KW6YMyOGg2aJM O4o8gEFH3zgBQqLBsOf+O85GbQ2ZTLFoRaWkbRYFYYBaypd+S4TBRn9i0gL0Qw/q KImvYV47HcBK0uTuuV0dG/2YzUs/JraKGMU0sVmUNiDqfOm7+R+NAlU86jQ4PNo+ G0cV2IpEt9Bk/06XmSWI944X7NTe/ZDXs8Fa5MveLk87wETzg54F3RK2AoyHPY59 UK/3nisrRmUDeRZHiRp53E6eSW7VSXoHUgqeHt04fvLheMXpAnuibKJcKGTYqYMe kfkNuq73chpb9uZhe0EJ =PCrO -----END PGP SIGNATURE-----

2 1

Re: oledb32: Implement IDataSourceLocator get/put hWnd
by Alexandre Julliard Sept. 4, 2013

Sept. 4, 2013

Alistair Leslie-Hughes <leslie_alistair(a)hotmail.com> writes: > Hi, > > > Changelog: > oledb32: Implement IDataSourceLocator get/put hWnd It doesn't work here: ../../../tools/runtest -q -P wine -M oledb32.dll -T ../../.. -p oledb32_test.exe.so database.c && touch database.ok database.c:252: Test failed: got 80040154 make[1]: *** [database.ok] Error 1 -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH] wined3d: Fix per-stage constant in GLSL fixed function pipeline + add tests. (try 2)
by Matteo Bruni Sept. 4, 2013

Sept. 4, 2013

2013/9/4 Christian Costa <titan.costa(a)gmail.com>: > This patch fixes part of bug 33606 and 31918. > > The current code generates shaders that support per-stage constant but does not declare the variables used causing thus compilation failures. > With this patch, these variables are declared and updated when needed. Tests are also added. > > Thanks to Matteo Bruni for review and support. > > Try 2: > - update with latest git Hi, I have a few small nits still, please bear with me... > --- > dlls/d3d9/tests/visual.c | 80 ++++++++++++++++++++++++++++++++++++++++++++ > dlls/wined3d/glsl_shader.c | 34 ++++++++++++++++++- > 2 files changed, 112 insertions(+), 2 deletions(-) > > diff --git a/dlls/d3d9/tests/visual.c b/dlls/d3d9/tests/visual.c > index b856c93..6072c23 100644 > --- a/dlls/d3d9/tests/visual.c > +++ b/dlls/d3d9/tests/visual.c > @@ -10742,6 +10742,85 @@ static void dp3_alpha_test(IDirect3DDevice9 *device) { > ok(hr == D3D_OK, "IDirect3DDevice9_SetTextureStageState failed with 0x%08x\n", hr); > } > > +static void perstage_constant_test(IDirect3DDevice9 *device) > +{ > + HRESULT hr; > + D3DCAPS9 caps; > + DWORD color; > + struct vertex quad[] = { > + { -1.0, -1.0, 0.1, 0x408080c0 }, > + { 1.0, -1.0, 0.1, 0x408080c0 }, > + { -1.0, 1.0, 0.1, 0x408080c0 }, > + { 1.0, 1.0, 0.1, 0x408080c0 }, > + }; > + Can you please make quad[] static const? Also, add the 'f' suffix to the float constants and move the opening brace to newline. > + memset(&caps, 0, sizeof(caps)); > + hr = IDirect3DDevice9_GetDeviceCaps(device, &caps); > + ok(SUCCEEDED(hr), "GetDeviceCaps failed with 0x%08x\n", hr); > + if (!(caps.PrimitiveMiscCaps & D3DPMISCCAPS_PERSTAGECONSTANT)) > + { > + skip("D3DPMISCCAPS_PERSTAGECONSTANT not supported\n"); Please put a '.' at the end of the message. Same for the following prints. > + return; > + } > + > + hr = IDirect3DDevice9_SetFVF(device, D3DFVF_XYZ | D3DFVF_DIFFUSE); > + ok(hr == D3D_OK, "IDirect3DDevice9_SetFVF failed with 0x%08x\n", hr); > + > + hr = IDirect3DDevice9_SetTextureStageState(device, 0, D3DTSS_CONSTANT, 0x80a1b2c3); > + ok(hr == D3D_OK, "IDirect3DDevice9_SetTextureStageState failed with 0x%08x\n", hr); > + > + /* Check color values */ > + hr = IDirect3DDevice9_SetTextureStageState(device, 0, D3DTSS_COLOROP, D3DTOP_SELECTARG1); > + ok(hr == D3D_OK, "IDirect3DDevice9_SetTextureStageState failed with 0x%08x\n", hr); > + hr = IDirect3DDevice9_SetTextureStageState(device, 0, D3DTSS_COLORARG1, D3DTA_CONSTANT); > + ok(hr == D3D_OK, "IDirect3DDevice9_SetTextureStageState failed with 0x%08x\n", hr); > + Although you don't strictly need it here, I'd explicitly set D3DTSS_COLOROP for stage 1 to D3DTOP_DISABLE. Also maybe set D3DTSS_ALPHAOP for stage 0 to disabled? > + hr = IDirect3DDevice9_Clear(device, 0, NULL, D3DCLEAR_TARGET | D3DCLEAR_ZBUFFER, 0x00000000, 1.0f, 0); > + ok(hr == D3D_OK, "IDirect3DDevice9_Clear failed with 0x%08x\n", hr); > + > + hr = IDirect3DDevice9_BeginScene(device); > + ok(hr == D3D_OK, "IDirect3DDevice9_BeginScene failed with 0x%08x\n", hr); > + hr = IDirect3DDevice9_DrawPrimitiveUP(device, D3DPT_TRIANGLESTRIP, 2, quad, sizeof(*quad)); > + ok(SUCCEEDED(hr), "DrawPrimitiveUP failed with 0x%08x\n", hr); > + hr = IDirect3DDevice9_EndScene(device); > + ok(hr == D3D_OK, "IDirect3DDevice9_EndScene failed with 0x%08x\n", hr); > + > + color = getPixelColor(device, 320, 240); > + ok(color_match(color, 0x00a1b2c3, 4), "perstage constant test 0x%08x, expected 0x00a1b2c3\n", color); > + hr = IDirect3DDevice9_Present(device, NULL, NULL, NULL, NULL); > + ok(SUCCEEDED(hr), "IDirect3DDevice9_Present failed with 0x%08x\n", hr); > + > + /* Check alpha value */ > + hr = IDirect3DDevice9_SetTextureStageState(device, 0, D3DTSS_COLOROP, D3DTOP_SELECTARG1); > + ok(hr == D3D_OK, "IDirect3DDevice9_SetTextureStageState failed with 0x%08x\n", hr); > + hr = IDirect3DDevice9_SetTextureStageState(device, 0, D3DTSS_COLORARG1, D3DTA_CONSTANT | D3DTA_ALPHAREPLICATE); > + ok(hr == D3D_OK, "IDirect3DDevice9_SetTextureStageState failed with 0x%08x\n", hr); > + hr = IDirect3DDevice9_SetTextureStageState(device, 0, D3DTSS_ALPHAOP, D3DTOP_SELECTARG1); > + ok(hr == D3D_OK, "IDirect3DDevice9_SetTextureStageState failed with 0x%08x\n", hr); > + hr = IDirect3DDevice9_SetTextureStageState(device, 0, D3DTSS_ALPHAARG1, D3DTA_CONSTANT); > + ok(hr == D3D_OK, "IDirect3DDevice9_SetTextureStageState failed with 0x%08x\n", hr); > + > + hr = IDirect3DDevice9_Clear(device, 0, NULL, D3DCLEAR_TARGET | D3DCLEAR_ZBUFFER, 0x00000000, 1.0f, 0); > + ok(hr == D3D_OK, "IDirect3DDevice9_Clear failed with 0x%08x\n", hr); > + > + hr = IDirect3DDevice9_BeginScene(device); > + ok(hr == D3D_OK, "IDirect3DDevice9_BeginScene failed with 0x%08x\n", hr); > + hr = IDirect3DDevice9_DrawPrimitiveUP(device, D3DPT_TRIANGLESTRIP, 2, quad, sizeof(*quad)); > + ok(SUCCEEDED(hr), "DrawPrimitiveUP failed with 0x%08x\n", hr); > + hr = IDirect3DDevice9_EndScene(device); > + ok(hr == D3D_OK, "IDirect3DDevice9_EndScene failed with 0x%08x\n", hr); > + > + color = getPixelColor(device, 320, 240); > + ok(color_match(color, 0x00808080, 4), "perstage constant test 0x%08x, expected 0x00808080\n", color); > + hr = IDirect3DDevice9_Present(device, NULL, NULL, NULL, NULL); > + ok(SUCCEEDED(hr), "IDirect3DDevice9_Present failed with 0x%08x\n", hr); > + > + hr = IDirect3DDevice9_SetTextureStageState(device, 0, D3DTSS_COLOROP, D3DTOP_DISABLE); > + ok(hr == D3D_OK, "IDirect3DDevice9_SetTextureStageState failed with 0x%08x\n", hr); > + hr = IDirect3DDevice9_SetTextureStageState(device, 0, D3DTSS_ALPHAOP, D3DTOP_DISABLE); > + ok(hr == D3D_OK, "IDirect3DDevice9_SetTextureStageState failed with 0x%08x\n", hr); I'd move those to the test which actually requires it (which is depth_buffer2_test IIUC). It could be a separate patch. The other option would be to move this new test out of the way (e.g. by executing it next to resz_test(), thus using a separate device). I don't have a strong opinion in that regard though. > +} > + > static void zwriteenable_test(IDirect3DDevice9 *device) { > HRESULT hr; > DWORD color; > @@ -14811,6 +14890,7 @@ START_TEST(visual) > texop_range_test(device_ptr); > alphareplicate_test(device_ptr); > dp3_alpha_test(device_ptr); > + perstage_constant_test(device_ptr); > depth_buffer_test(device_ptr); > depth_buffer2_test(device_ptr); > depth_blit_test(device_ptr); > diff --git a/dlls/wined3d/glsl_shader.c b/dlls/wined3d/glsl_shader.c > index 740e100..2b8041a 100644 > --- a/dlls/wined3d/glsl_shader.c > +++ b/dlls/wined3d/glsl_shader.c > @@ -132,6 +132,7 @@ struct glsl_ps_program > GLint bumpenv_mat_location[MAX_TEXTURES]; > GLint bumpenv_lum_scale_location[MAX_TEXTURES]; > GLint bumpenv_lum_offset_location[MAX_TEXTURES]; > + GLint const_location[MAX_TEXTURES]; > GLint tex_factor_location; > GLint specular_enable_location; > GLint ycorrection_location; > @@ -918,6 +919,15 @@ static void shader_glsl_load_constants(void *shader_priv, struct wined3d_context > else > GL_EXTCALL(glUniform4fARB(prog->ps.specular_enable_location, 0.0f, 0.0f, 0.0f, 0.0f)); > > + for (i = 0; i < MAX_TEXTURES; ++i) > + { > + if (prog->ps.const_location[i] != -1) > + { > + D3DCOLORTOGLFLOAT4(state->texture_states[i][WINED3D_TSS_CONSTANT], col); > + GL_EXTCALL(glUniform4fARB(prog->ps.const_location[i], col[0], col[1], col[2], col[3])); > + } > + } > + > checkGLcall("fixed function uniforms"); > } > Like I already mentioned privately, this could have its own WINED3D_SHADER_CONST_* flag but I'm not sure it would be worth it. Comments? > @@ -5167,7 +5177,6 @@ static const char *shader_glsl_get_ffp_fragment_op_arg(struct wined3d_shader_buf > break; > > case WINED3DTA_CONSTANT: > - FIXME("Per-stage constants not implemented.\n"); > switch (stage) > { > case 0: ret = "const0"; break; > @@ -5447,6 +5456,16 @@ static GLuint shader_glsl_generate_ffp_fragment_shader(struct wined3d_shader_buf > > for (stage = 0; stage < MAX_TEXTURES; ++stage) > { > + if ((settings->op[stage].carg0 == WINED3DTA_CONSTANT) > + || (settings->op[stage].carg1 == WINED3DTA_CONSTANT) > + || (settings->op[stage].carg2 == WINED3DTA_CONSTANT) > + || (settings->op[stage].aarg0 == WINED3DTA_CONSTANT) > + || (settings->op[stage].aarg1 == WINED3DTA_CONSTANT) > + || (settings->op[stage].aarg2 == WINED3DTA_CONSTANT)) > + { > + shader_addline(buffer, "uniform vec4 const%d;", stage); > + } > + > if (!(tex_map & (1 << stage))) > continue; > > @@ -5803,6 +5822,8 @@ static void shader_glsl_init_ps_uniform_locations(const struct wined3d_gl_info * > ps->bumpenv_lum_scale_location[i] = GL_EXTCALL(glGetUniformLocationARB(program_id, name)); > snprintf(name, sizeof(name), "bumpenv_lum_offset%u", i); > ps->bumpenv_lum_offset_location[i] = GL_EXTCALL(glGetUniformLocationARB(program_id, name)); > + snprintf(name, sizeof(name), "const%u", i); > + ps->const_location[i] = GL_EXTCALL(glGetUniformLocationARB(program_id, name)); > } > > ps->tex_factor_location = GL_EXTCALL(glGetUniformLocationARB(program_id, "tex_factor")); > @@ -7106,7 +7127,8 @@ static void glsl_fragment_pipe_get_caps(const struct wined3d_gl_info *gl_info, s > { > caps->wined3d_caps = WINED3D_FRAGMENT_CAP_PROJ_CONTROL > | WINED3D_FRAGMENT_CAP_SRGB_WRITE; > - caps->PrimitiveMiscCaps = WINED3DPMISCCAPS_TSSARGTEMP; > + caps->PrimitiveMiscCaps = WINED3DPMISCCAPS_TSSARGTEMP > + | WINED3DPMISCCAPS_PERSTAGECONSTANT; > caps->TextureOpCaps = WINED3DTEXOPCAPS_DISABLE > | WINED3DTEXOPCAPS_SELECTARG1 > | WINED3DTEXOPCAPS_SELECTARG2 > @@ -7251,6 +7273,7 @@ static const struct StateEntryTemplate glsl_fragment_pipe_state_template[] = > {STATE_TEXTURESTAGE(0, WINED3D_TSS_ALPHA_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(0, WINED3D_TSS_ALPHA_ARG0), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(0, WINED3D_TSS_RESULT_ARG), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > + {STATE_TEXTURESTAGE(0, WINED3D_TSS_CONSTANT), {STATE_TEXTURESTAGE(0, WINED3D_TSS_CONSTANT), glsl_fragment_pipe_invalidate_constants}, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(1, WINED3D_TSS_COLOR_OP), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(1, WINED3D_TSS_COLOR_ARG1), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(1, WINED3D_TSS_COLOR_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > @@ -7260,6 +7283,7 @@ static const struct StateEntryTemplate glsl_fragment_pipe_state_template[] = > {STATE_TEXTURESTAGE(1, WINED3D_TSS_ALPHA_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(1, WINED3D_TSS_ALPHA_ARG0), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(1, WINED3D_TSS_RESULT_ARG), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > + {STATE_TEXTURESTAGE(1, WINED3D_TSS_CONSTANT), {STATE_TEXTURESTAGE(1, WINED3D_TSS_CONSTANT), glsl_fragment_pipe_invalidate_constants}, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(2, WINED3D_TSS_COLOR_OP), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(2, WINED3D_TSS_COLOR_ARG1), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(2, WINED3D_TSS_COLOR_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > @@ -7269,6 +7293,7 @@ static const struct StateEntryTemplate glsl_fragment_pipe_state_template[] = > {STATE_TEXTURESTAGE(2, WINED3D_TSS_ALPHA_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(2, WINED3D_TSS_ALPHA_ARG0), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(2, WINED3D_TSS_RESULT_ARG), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > + {STATE_TEXTURESTAGE(2, WINED3D_TSS_CONSTANT), {STATE_TEXTURESTAGE(2, WINED3D_TSS_CONSTANT), glsl_fragment_pipe_invalidate_constants}, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(3, WINED3D_TSS_COLOR_OP), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(3, WINED3D_TSS_COLOR_ARG1), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(3, WINED3D_TSS_COLOR_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > @@ -7278,6 +7303,7 @@ static const struct StateEntryTemplate glsl_fragment_pipe_state_template[] = > {STATE_TEXTURESTAGE(3, WINED3D_TSS_ALPHA_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(3, WINED3D_TSS_ALPHA_ARG0), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(3, WINED3D_TSS_RESULT_ARG), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > + {STATE_TEXTURESTAGE(3, WINED3D_TSS_CONSTANT), {STATE_TEXTURESTAGE(3, WINED3D_TSS_CONSTANT), glsl_fragment_pipe_invalidate_constants}, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(4, WINED3D_TSS_COLOR_OP), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(4, WINED3D_TSS_COLOR_ARG1), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(4, WINED3D_TSS_COLOR_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > @@ -7287,6 +7313,7 @@ static const struct StateEntryTemplate glsl_fragment_pipe_state_template[] = > {STATE_TEXTURESTAGE(4, WINED3D_TSS_ALPHA_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(4, WINED3D_TSS_ALPHA_ARG0), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(4, WINED3D_TSS_RESULT_ARG), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > + {STATE_TEXTURESTAGE(4, WINED3D_TSS_CONSTANT), {STATE_TEXTURESTAGE(4, WINED3D_TSS_CONSTANT), glsl_fragment_pipe_invalidate_constants}, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(5, WINED3D_TSS_COLOR_OP), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(5, WINED3D_TSS_COLOR_ARG1), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(5, WINED3D_TSS_COLOR_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > @@ -7296,6 +7323,7 @@ static const struct StateEntryTemplate glsl_fragment_pipe_state_template[] = > {STATE_TEXTURESTAGE(5, WINED3D_TSS_ALPHA_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(5, WINED3D_TSS_ALPHA_ARG0), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(5, WINED3D_TSS_RESULT_ARG), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > + {STATE_TEXTURESTAGE(5, WINED3D_TSS_CONSTANT), {STATE_TEXTURESTAGE(5, WINED3D_TSS_CONSTANT), glsl_fragment_pipe_invalidate_constants}, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(6, WINED3D_TSS_COLOR_OP), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(6, WINED3D_TSS_COLOR_ARG1), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(6, WINED3D_TSS_COLOR_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > @@ -7305,6 +7333,7 @@ static const struct StateEntryTemplate glsl_fragment_pipe_state_template[] = > {STATE_TEXTURESTAGE(6, WINED3D_TSS_ALPHA_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(6, WINED3D_TSS_ALPHA_ARG0), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(6, WINED3D_TSS_RESULT_ARG), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > + {STATE_TEXTURESTAGE(6, WINED3D_TSS_CONSTANT), {STATE_TEXTURESTAGE(6, WINED3D_TSS_CONSTANT), glsl_fragment_pipe_invalidate_constants}, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(7, WINED3D_TSS_COLOR_OP), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(7, WINED3D_TSS_COLOR_ARG1), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(7, WINED3D_TSS_COLOR_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > @@ -7314,6 +7343,7 @@ static const struct StateEntryTemplate glsl_fragment_pipe_state_template[] = > {STATE_TEXTURESTAGE(7, WINED3D_TSS_ALPHA_ARG2), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(7, WINED3D_TSS_ALPHA_ARG0), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > {STATE_TEXTURESTAGE(7, WINED3D_TSS_RESULT_ARG), {STATE_PIXELSHADER, NULL }, WINED3D_GL_EXT_NONE }, > + {STATE_TEXTURESTAGE(7, WINED3D_TSS_CONSTANT), {STATE_TEXTURESTAGE(7, WINED3D_TSS_CONSTANT), glsl_fragment_pipe_invalidate_constants}, WINED3D_GL_EXT_NONE }, > {STATE_PIXELSHADER, {STATE_PIXELSHADER, glsl_fragment_pipe_shader }, WINED3D_GL_EXT_NONE }, > {STATE_RENDER(WINED3D_RS_FOGENABLE), {STATE_RENDER(WINED3D_RS_FOGENABLE), glsl_fragment_pipe_fog }, WINED3D_GL_EXT_NONE }, > {STATE_RENDER(WINED3D_RS_FOGTABLEMODE), {STATE_RENDER(WINED3D_RS_FOGENABLE), NULL }, WINED3D_GL_EXT_NONE }, > > > Cheers, Matteo.

1 0

Re: 0001-Fix-race-for-IOCTL_SERIAL_WAIT_ON_MASK.patch
by Alexandre Julliard Sept. 4, 2013

Sept. 4, 2013

Wolfgang Walter <wine(a)stwm.de> writes: > @@ -1265,8 +1265,12 @@ static inline NTSTATUS io_control(HANDLE hDevice, > case IOCTL_SERIAL_WAIT_ON_MASK: > if (lpOutBuffer && nOutBufferSize == sizeof(DWORD)) > { > + piosb->u.Status = STATUS_PENDING; > + piosb->Information = 0; > if (!(status = wait_on(hDevice, fd, hEvent, piosb, lpOutBuffer))) > sz = sizeof(DWORD); > + else if (status == STATUS_PENDING) > + return status; Status is not supposed to be set until the operation is done. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [2/2] rpcrt4: Clear the connection pool when closing an http connection.
by Jacek Caban Sept. 4, 2013

Sept. 4, 2013

On 09/04/13 15:01, Hans Leidekker wrote: > --- > dlls/rpcrt4/rpc_transport.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/dlls/rpcrt4/rpc_transport.c b/dlls/rpcrt4/rpc_transport.c > index d0857fa..1eb0151 100644 > --- a/dlls/rpcrt4/rpc_transport.c > +++ b/dlls/rpcrt4/rpc_transport.c > @@ -3234,6 +3234,8 @@ static int rpcrt4_ncacn_http_close(RpcConnection *Connection) > HeapFree(GetProcessHeap(), 0, httpc->servername); > httpc->servername = NULL; > > + /* don't allow this connection to be reused */ > + InternetSetOptionW(NULL, INTERNET_OPTION_SETTINGS_CHANGED, NULL, 0); There must be a better way to do that than removing all existing wininet cached connections to all hosts. Removing INTERNET_FLAG_KEEP_CONNECTION from HttpOpenRequest call would be a good start... Jacek

2 3

Re: [3/6] ntdll: NtWriteFile should fail for overlapped IO on files if offset is negative.
by Alexandre Julliard Sept. 4, 2013

Sept. 4, 2013

Dmitry Timoshkov <dmitry(a)baikal.ru> writes: > diff --git a/dlls/ntdll/tests/file.c b/dlls/ntdll/tests/file.c > index cde299c..c802432 100644 > --- a/dlls/ntdll/tests/file.c > +++ b/dlls/ntdll/tests/file.c > @@ -2124,11 +2124,8 @@ todo_wine > iob.Information = -1; > offset.QuadPart = (LONGLONG)-2 /* FILE_USE_FILE_POINTER_POSITION */; > status = pNtWriteFile(hfile, 0, NULL, NULL, &iob, contents, sizeof(contents), &offset, NULL); > -todo_wine > ok(status == STATUS_INVALID_PARAMETER, "expected STATUS_INVALID_PARAMETER, got %#x\n", status); > -todo_wine > ok(iob.Status == -1, "expected -1, got %#x\n", iob.Status); > -todo_wine > ok(iob.Information == -1, "expected -1, got %ld\n", iob.Information); A test for a non-magic negative value would be a good idea. -- Alexandre Julliard julliard(a)winehq.org

1 0

Re: [PATCH] opencl/tests: Add initial tests
by Marvin Sept. 4, 2013

Sept. 4, 2013

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://newtestbot.winehq.org/JobDetails.pl?Key=2003 Your paranoid android. === build (build) === Unable to regenerate dlls/opencl/Makefile Recreation of tests/Makefile failed

1 0