July 2016 - Wine-Devel - list.winehq.org

Re: ncrypt: add some ncrypt stubs
by Alex Henrie July 12, 2016

July 12, 2016

+ return NTE_INVALID_PARAMETER; I think NTE_NOT_SUPPORTED makes more sense for stub functions in this DLL. Other than that, the patch looks good. -Alex

2 1

Ubuntu considering dropping 32-bit libraries
by Josh DuBois July 12, 2016

July 12, 2016

A Slashdot post yesterday pointed to a worrying thread on the Ubuntu mailing list archive about dropping 32-bit support from Ubuntu. The Ubuntu thread is here: https://lists.ubuntu.com/archives/ubuntu-devel/2016-June/039420.html It is not 100% clear to me what they are considering - they mention dropping 32-bit .isos and also ceasing to support users who want to run 32-bit apps (at least unless the app is packaged in a container alongside all of the necessary libraries). Their thought is to do this in a couple of years, with Ubuntu 18.10: 18.10+: * Stop providing i386 port * Run legacy i386 only application in snaps / containers / virtual machines Disturbingly, no one on the Ubuntu thread ever mentions Wine. Oddly there is discussion about IoT applications which might need 32-bit libraries and a proposal to continue building select libs for those things, but maybe minus the graphics stack :-(. In the Slashdot post someone at least mentions Wine, but the little discussion that prompted was seemingly in error until Francois came along to correct them. I think Wine should be aware of the issue and make some noise about it before distros grow attached to the idea of ceasing to build 32-bit libraries. I will probably post to the Ubuntu thread to at least mention Wine, unless someone here is involved in that community and thinks they can do a better job. The more distros hear from the Wine community about the value of 32-bit libraries, the better. It might be that they will conclude on their own that users need them to continue building 32-bit libraries, but I don't know that we can trust distros not to break things if we don't speak up.

1 1

Re: [PATCH 3/3] wined3d/resource: Performance improvements, try 2
by Henri Verbeet July 12, 2016

July 12, 2016

This could do with a more descriptive subject line. On 11 July 2016 at 18:13, Patrick Rudolph <siro(a)das-labor.org> wrote: > Tests showed that D3DLOCK_NOOVERWRITE is prefered over D3DLOCK_DISCARD > and that D3DLOCK_NOOVERWRITE doesn't depend on dynamic buffers. "preferred", but you'll probably want to say "takes precedence over" instead. > Unigine Heavon maps a lot of buffers with both flags, but run on about > 85% GPU-load, as WINE removes both hints and the game has to wait for > the buffer to be mapped. "Unigine Heaven", "Wine" > OpenGL core profile version string: 3.3 (Core Profile) Mesa 12.1.0-devel (git-60c68c5) It doesn't make much of a difference here, but note that unless you set the "MaxVersionGL" registry key, wined3d doesn't use core profiles. > --- > dlls/d3d9/tests/visual.c | 10 +++++----- > dlls/wined3d/resource.c | 33 ++++++++++++++++----------------- > 2 files changed, 21 insertions(+), 22 deletions(-) What about the d3d8 tests? > @@ -359,29 +359,28 @@ DWORD wined3d_resource_sanitize_map_flags(const struct wined3d_resource *resourc > { > /* Not all flags make sense together, but Windows never returns an error. > * Catch the cases that could cause issues. */ > - if (flags & WINED3D_MAP_READONLY) > + if ((flags & (WINED3D_MAP_DISCARD | WINED3D_MAP_NOOVERWRITE)) == > + (WINED3D_MAP_DISCARD | WINED3D_MAP_NOOVERWRITE)) > { > - if (flags & WINED3D_MAP_DISCARD) > - { > - WARN("WINED3D_MAP_READONLY combined with WINED3D_MAP_DISCARD, ignoring flags.\n"); > - return 0; > - } > - if (flags & WINED3D_MAP_NOOVERWRITE) > - { > - WARN("WINED3D_MAP_READONLY combined with WINED3D_MAP_NOOVERWRITE, ignoring flags.\n"); > - return 0; > - } > + WARN("WINED3D_MAP_DISCARD and WINED3D_MAP_NOOVERWRITE used together, using WINED3D_MAP_NOOVERWRITE.\n"); > + flags &= ~WINED3D_MAP_DISCARD; > + } > + if ((flags & (WINED3D_MAP_READONLY | WINED3D_MAP_NOOVERWRITE)) == > + (WINED3D_MAP_READONLY | WINED3D_MAP_NOOVERWRITE)) > + { > + WARN("WINED3D_MAP_READONLY and WINED3D_MAP_NOOVERWRITE used together, clearing WINED3D_MAP_READONLY.\n"); > + flags &= ~WINED3D_MAP_READONLY; > } > - else if ((flags & (WINED3D_MAP_DISCARD | WINED3D_MAP_NOOVERWRITE)) > - == (WINED3D_MAP_DISCARD | WINED3D_MAP_NOOVERWRITE)) > + > + if ((flags & (WINED3D_MAP_READONLY | WINED3D_MAP_DISCARD)) == > + (WINED3D_MAP_READONLY | WINED3D_MAP_DISCARD)) > { > - WARN("WINED3D_MAP_DISCARD and WINED3D_MAP_NOOVERWRITE used together, ignoring.\n"); > + WARN("WINED3D_MAP_READONLY combined with WINED3D_MAP_DISCARD, ignoring flags.\n"); > return 0; > } > - else if (flags & (WINED3D_MAP_DISCARD | WINED3D_MAP_NOOVERWRITE) > - && !(resource->usage & WINED3DUSAGE_DYNAMIC)) > + else if ((flags & WINED3D_MAP_DISCARD) && !(resource->usage & WINED3DUSAGE_DYNAMIC)) > { > - WARN("DISCARD or NOOVERWRITE map on non-dynamic buffer, ignoring.\n"); > + WARN("DISCARD on non dynamic buffer, ignoring.\n"); > return 0; > } This changes several things at once. One (logical) change per commit, please.

1 0

Re: [PATCH 1/3] d3d9/tests/visual: Add Vertexbuffer locking tests, try 2
by Henri Verbeet July 12, 2016

July 12, 2016

On 11 July 2016 at 18:13, Patrick Rudolph <siro(a)das-labor.org> wrote: > +static void test_vb_lock_flags(void) > +{ > + IDirect3DVertexBuffer9 *buffer; > + IDirect3DDevice9 *device; > + IDirect3D9 *d3d9; > + DWORD i, j, tri, quads; > + HWND window; > + HRESULT hr; > + ULONG size; > + unsigned refcount; "ULONG refcount;", but that's minor. > + { > + "0", > + 0, > + 0, > + FALSE, > + FALSE > + }, This may have been inspired by other tests, but as long as it fits I'd prefer the more compact option of keeping this all on a single line. You may have to shorten the "flags_s" values a bit to do that. > + static struct > + { > + struct > + { > + struct vec3 position; > + DWORD diffuse; > + } strip[4]; > + } > + *quad_strip_array, quad_strip1 = > + { > + { > + {{-1.0f, -1.0f, 0.0f}, 0xffff0000}, > + {{-1.0f, 1.0f, 0.0f}, 0xff00ff00}, > + {{ 1.0f, -1.0f, 0.0f}, 0xff0000ff}, > + {{ 1.0f, 1.0f, 0.0f}, 0xffffffff}, > + } > + }, > + quad_strip2 = > + { > + { > + {{-1.0f, -1.0f, 0.0f}, 0xffffff00}, > + {{-1.0f, 1.0f, 0.0f}, 0xffffff00}, > + {{ 1.0f, -1.0f, 0.0f}, 0xffffff00}, > + {{ 1.0f, 1.0f, 0.0f}, 0xffffff00}, > + } > + }; These are triangle strips or quads, but I don't think "quad strips" makes sense here. "quad_strip1" and "quad_strip2" can be const, and "quad_strip_array" doesn't need to be static, right? > + hr = IDirect3DDevice9_CreateVertexBuffer(device, size, tests[i].usage, 0, D3DPOOL_DEFAULT, &buffer, NULL); > + ok(SUCCEEDED(hr), "Failed to create vertex buffer, hr %#x.\n", hr); > + if (!SUCCEEDED(hr)) > + continue; The continue is pointless, the test would have already failed at that point. > + if (tests[i].unsyncronized == unsyncronized) > + break; This means the test will only try the smallest buffer size for cases that you expect to be synchronised, right? That seems problematic, since the reason you try the larger buffer sizes is that you can't necessarily reliably detect the unsynchronised cases with the smaller buffer sizes. > + if (tests[i].todo) > + { > + todo_wine ok(tests[i].unsyncronized == unsyncronized, "Expected buffer mapped %s. Flags = %s. Usage = %d.\n", > + tests[i].unsyncronized ? "unsyncronized" : "syncronized", tests[i].flags_s, tests[i].usage); > + } > + else > + { > + ok(tests[i].unsyncronized == unsyncronized, "Expected buffer mapped %s. Flags = %s. Usage = %d.\n", > + tests[i].unsyncronized ? "unsyncronized" : "syncronized", tests[i].flags_s, tests[i].usage); > + } I think "todo_wine_if" would be appropriate here. Please use %#x to print the usage. Note that ddraw has the mostly equivalent flags DDLOCK_NOOVERWRITE and DDLOCK_DISCARDCONTENTS as well. Direct3D 10 has D3D10_MAP_WRITE_DISCARD and D3D10_MAP_WRITE_NO_OVERWRITE, but you can't use them at the same time because they're not flags. Direct3D 11 is similar to Direct3D 10. You'll need to account for the testbot failures in some way. They may be specific to WARP, but it's suspicious that the "D3DLOCK_NOOVERWRITE" tests do seem to pass. Also, please follow the usual conventions for the subject line. (I.e., "d3d9/tests:", "d3d8/tests:", "wined3d:".)

1 0

Re: [PATCH] dxgi: Implement IDXGISwapChain GetFullscreenState
by Henri Verbeet July 12, 2016

July 12, 2016

On 11 July 2016 at 12:08, Alistair Leslie-Hughes <leslie_alistair(a)hotmail.com> wrote: > +static HRESULT STDMETHODCALLTYPE dxgi_swapchain_GetFullscreenState(IDXGISwapChain *iface, > + BOOL *fullscreen, IDXGIOutput **target) > +{ > + HRESULT hr = S_OK; > + > + TRACE("iface %p, fullscreen %p, target %p semi-stub.\n", iface, fullscreen, target); > + > + if (fullscreen) > + *fullscreen = TRUE; > + > + if (target) > + hr = dxgi_swapchain_GetContainingOutput(iface, target); > + > + return hr; > +} That's not a real implementation, of course. > @@ -496,6 +498,22 @@ static void test_create_swapchain(void) > refcount = IUnknown_Release(parent); > todo_wine ok(refcount == 4, "Got unexpected refcount %u.\n", refcount); > > + hr = IDXGISwapChain_GetFullscreenState(swapchain, NULL, NULL); > + ok(hr == S_OK, "GetFullscreenState failed, hr %#x.\n", hr); > + > + hr = IDXGISwapChain_GetFullscreenState(swapchain, &fullscreen, NULL); > + ok(hr == S_OK, "GetFullscreenState failed, hr %#x.\n", hr); > + > + hr = IDXGISwapChain_GetFullscreenState(swapchain, NULL, &target); > + ok(hr == S_OK, "GetFullscreenState failed, hr %#x.\n", hr); > + if(target) > + IDXGIOutput_Release(target); > + > + hr = IDXGISwapChain_GetFullscreenState(swapchain, &fullscreen, &target); > + ok(hr == S_OK, "GetFullscreenState failed, hr %#x.\n", hr); > + if(target) > + IDXGIOutput_Release(target); > + And this doesn't test much beyond the function returning S_OK.

1 0

Re: [PATCH v2] kernel32: Use setprogname(3) to set the program name if available.
by Theodore Dubois July 12, 2016

July 12, 2016

This patch causes a segfault in the event that __wine_main_argv is not the argv that got passed to main. This happened in a program I wrote that acts as a custom wine loader. It creates an argv by using malloc, then passes that to wine_init. Why wouldn’t setprogname(argv[1]) be adequate? ~Theodore > On Feb 19, 2016, at 2:33 PM, Charles Davis <cdavis5x(a)gmail.com> wrote: > > Signed-off-by: Charles Davis <cdavis5x(a)gmail.com> > --- > Try 2: > * Clean up the #ifdefs a bit. (I'm not happy about the duplicated code, though.) > * Don't copy the progname into a static array. There's no need; the argument vector lasts as long as the process itself. (I suppose I was being overly defensive with that.) > > configure.ac | 1 + > dlls/kernel32/process.c | 17 ++++++++++++++--- > 2 files changed, 15 insertions(+), 3 deletions(-) > > diff --git a/configure.ac b/configure.ac > index c9445e7..2ebbb10 100644 > --- a/configure.ac > +++ b/configure.ac > @@ -2026,6 +2026,7 @@ AC_CHECK_FUNCS(\ > sched_yield \ > select \ > setproctitle \ > + setprogname \ > setrlimit \ > settimeofday \ > sigaltstack \ > diff --git a/dlls/kernel32/process.c b/dlls/kernel32/process.c > index 86333be..4771108 100644 > --- a/dlls/kernel32/process.c > +++ b/dlls/kernel32/process.c > @@ -1118,9 +1118,20 @@ static void set_process_name( int argc, char *argv[] ) > { > #ifdef HAVE_SETPROCTITLE > setproctitle("-%s", argv[1]); > -#endif > + /* remove argv[0] */ > + memmove( argv, argv + 1, argc * sizeof(argv[0]) ); > +#elif defined(HAVE_SETPROGNAME) > + int i, offset; > + char *end = argv[argc-1] + strlen(argv[argc-1]) + 1; > > -#ifdef HAVE_PRCTL > + offset = argv[1] - argv[0]; > + memmove( argv[1] - offset, argv[1], end - argv[1] ); > + memset( end - offset, 0, offset ); > + for (i = 1; i < argc; i++) argv[i-1] = argv[i] - offset; > + argv[i-1] = NULL; > + > + setprogname( argv[0] ); > +#elif defined(HAVE_PRCTL) > int i, offset; > char *p, *prctl_name = argv[1]; > char *end = argv[argc-1] + strlen(argv[argc-1]) + 1; > @@ -1141,11 +1152,11 @@ static void set_process_name( int argc, char *argv[] ) > argv[i-1] = NULL; > } > else > -#endif /* HAVE_PRCTL */ > { > /* remove argv[0] */ > memmove( argv, argv + 1, argc * sizeof(argv[0]) ); > } > +#endif /* HAVE_PRCTL */ > } > > > -- > 2.7.1 > > >

4 12

Re: ntoskrnl.exe: add IoAttachDevice stub
by Sebastian Lackner July 12, 2016

July 12, 2016

On 12.07.2016 05:07, Austin English wrote: > + > +/*********************************************************************** > + * IoAttachDevice (NTOSKRNL.EXE.@) > + */ > +NTSTATUS IoAttachDevice(DEVICE_OBJECT *source, UNICODE_STRING *target, DEVICE_OBJECT *attached) You forgot to specify the calling convention (WINAPI) - this is probably also the reason why your stub is not sufficient yet. Otherwise the patch looks fine to me. > +{ > + FIXME("(%p, %s, %p): stub\n", source, debugstr_us(target), attached); > + return STATUS_NOT_IMPLEMENTED; > +}

1 0

Re: [PATCH] kernel32/tests/fiber: Add tests for fiber-local storage.
by Sebastian Lackner July 11, 2016

July 11, 2016

On 08.07.2016 00:16, John Sheu wrote: > Signed-off-by: John Sheu <sheu(a)google.com> > --- > dlls/kernel32/tests/fiber.c | 291 +++++++++++++++++++++++++++++++++++++++----- > 1 file changed, 258 insertions(+), 33 deletions(-) > > diff --git a/dlls/kernel32/tests/fiber.c b/dlls/kernel32/tests/fiber.c > index 1e4ca66..4f61f80 100644 > --- a/dlls/kernel32/tests/fiber.c > +++ b/dlls/kernel32/tests/fiber.c > @@ -33,9 +33,13 @@ static BOOL (WINAPI *pFlsFree)(DWORD); > static PVOID (WINAPI *pFlsGetValue)(DWORD); > static BOOL (WINAPI *pFlsSetValue)(DWORD,PVOID); > > -static LPVOID fibers[2]; > +static LPVOID fibers[3]; > static BYTE testparam = 185; > -static WORD cbCount; > +static DWORD fls_index_to_set = FLS_OUT_OF_INDEXES; > +static PVOID fls_value_to_set = NULL; > + > +static int fiberCount = 0; > +static int cbCount = 0; > > static VOID init_funcs(void) > { > @@ -59,15 +63,44 @@ static VOID init_funcs(void) > > static VOID WINAPI FiberLocalStorageProc(PVOID lpFlsData) > { > + ok(lpFlsData == fls_value_to_set, > + "FlsData expected not to be changed, value is %p, expected %p\n", > + lpFlsData, fls_value_to_set); > cbCount++; > - ok(lpFlsData == (PVOID) 1587, "FlsData expected not to be changed\n"); > } > > static VOID WINAPI FiberMainProc(LPVOID lpFiberParameter) > { > BYTE *tparam = (BYTE *)lpFiberParameter; > - cbCount++; > + fiberCount++; > ok(*tparam == 185, "Parameterdata expected not to be changed\n"); > + if (fls_index_to_set != FLS_OUT_OF_INDEXES) > + { > + if (!pFlsSetValue || !pFlsGetValue) > + { > + win_skip( "Fiber Local Storage not supported\n" ); You can get rid of this check, fls_index_to_set should not be set when Fiber Local Storage is not supported. > + } > + else > + { > + PVOID pret; Usually "void *" types and variable names without "p" prefix are preferred. > + BOOL bret; > + > + pret = pFlsGetValue(fls_index_to_set); > + ok(pret == NULL, "FlsGetValue returned %p, expected NULL\n", pret); > + > + /* Set the FLS value */ > + SetLastError( 0xdeadbeef ); You can remove this line when you are not testing the error value. > + bret = pFlsSetValue(fls_index_to_set, fls_value_to_set); > + ok(bret, "FlsSetValue failed with error %u\n", GetLastError()); > + > + /* Verify that FlsGetValue retrieves the value set by FlsSetValue */ > + SetLastError( 0xdeadbeef ); > + pret = pFlsGetValue(fls_index_to_set); > + ok(pret == fls_value_to_set, > + "FlsGetValue returned %p, expected %p\n", pret, fls_value_to_set); > + ok(GetLastError() == ERROR_SUCCESS, "FlsGetValue error %u\n", GetLastError()); > + } > + } > pSwitchToFiber(fibers[0]); > } > > @@ -110,9 +143,23 @@ static void test_ConvertFiberToThread(void) > } > } > > +static void test_IsThreadAFiber(BOOL is_fiber) > +{ > + if (pIsThreadAFiber) > + { > + BOOL ret = pIsThreadAFiber(); > + ok(ret == is_fiber, "IsThreadAFiber reported %d, expected %d\n", ret, is_fiber); > + } > + else > + { > + win_skip( "IsThreadAFiber not present\n" ); > + return; return at the end of a function is unnecessary. Also, I'm not sure if it makes much sense to have this as a separate function. You could probably just inline it in this case. > + } > +} > + > static void test_FiberHandling(void) > { > - cbCount = 0; > + fiberCount = 0; > fibers[0] = pCreateFiber(0,FiberMainProc,&testparam); > ok(fibers[0] != 0, "CreateFiber failed with error %d\n", GetLastError()); > pDeleteFiber(fibers[0]); > @@ -124,12 +171,11 @@ static void test_FiberHandling(void) > else > test_ConvertThreadToFiber(); > > - > fibers[1] = pCreateFiber(0,FiberMainProc,&testparam); > ok(fibers[1] != 0, "CreateFiber failed with error %d\n", GetLastError()); > > pSwitchToFiber(fibers[1]); > - ok(cbCount == 1, "Wrong callback count: %d\n", cbCount); > + ok(fiberCount == 1, "Wrong fiber count: %d\n", fiberCount); > pDeleteFiber(fibers[1]); > > if (!pCreateFiberEx) > @@ -143,46 +189,72 @@ static void test_FiberHandling(void) > ok(fibers[1] != 0, "CreateFiberEx failed with error %d\n", GetLastError()); > > pSwitchToFiber(fibers[1]); > - ok(cbCount == 2, "Wrong callback count: %d\n", cbCount); > + ok(fiberCount == 2, "Wrong fiber count: %d\n", fiberCount); > pDeleteFiber(fibers[1]); > > - if (!pIsThreadAFiber) > - { > - win_skip( "IsThreadAFiber not present\n" ); > - return; > - } > - > - ok(pIsThreadAFiber(), "IsThreadAFiber reported FALSE\n"); > + test_IsThreadAFiber(TRUE); > test_ConvertFiberToThread(); > - ok(!pIsThreadAFiber(), "IsThreadAFiber reported TRUE\n"); > + test_IsThreadAFiber(FALSE); > } > > -static void test_FiberLocalStorage(PFLS_CALLBACK_FUNCTION cbfunc) > +static void test_FiberLocalStorage(void) > { > - DWORD fls; > + DWORD fls, fls_2; > BOOL ret; > - PVOID val = (PVOID) 1587; > + PVOID val; "void *" would be preferred here. > > - if (!pFlsAlloc) > + if (!pFlsAlloc || !pFlsSetValue || !pFlsGetValue || !pFlsFree) > { > win_skip( "Fiber Local Storage not supported\n" ); > return; > } > - cbCount = 0; > > - fls = pFlsAlloc(cbfunc); > - ok(fls != FLS_OUT_OF_INDEXES, "FlsAlloc failed with error %d\n", GetLastError()); > + /* Test an unallocated index > + * FlsFree should fail > + * FlsGetValue and FlsSetValue should succeed > + */ > + SetLastError( 0xdeadbeef ); > + ret = pFlsFree( 127 ); > + ok( !ret, "freeing fls index 127 (unallocated) succeeded\n" ); > + ok( GetLastError() == ERROR_INVALID_PARAMETER, > + "freeing fls index 127 (unallocated) wrong error %u\n", GetLastError() ); > > - ret = pFlsSetValue(fls, val); > - ok(ret, "FlsSetValue failed\n"); > - ok(val == pFlsGetValue(fls), "FlsGetValue failed\n"); > + SetLastError( 0xdeadbeef ); This is unnecessary if you don't test the error. > + val = pFlsGetValue( 127 ); > + ok( val == NULL, > + "getting fls index 127 (unallocated) failed with error %u\n", GetLastError() ); > + > + SetLastError( 0xdeadbeef ); Same here. > + ret = pFlsSetValue( 127, (PVOID) 0x217 ); "(void *)0x217" would be preferred here (and at a couple of places below). > + ok( ret, "setting fls index 127 (unallocated) failed with error %u\n", GetLastError() ); > + > + SetLastError( 0xdeadbeef ); > + val = pFlsGetValue( 127 ); > + ok( val == (PVOID) 0x217, "fls index 127 (unallocated) wrong value %p\n", val ); > + ok( GetLastError() == ERROR_SUCCESS, > + "getting fls index 127 (unallocated) failed with error %u\n", GetLastError() ); > + > + /* FlsFree, FlsGetValue, and FlsSetValue out of bounds should return > + * ERROR_INVALID_PARAMETER > + */ > + SetLastError( 0xdeadbeef ); > + ret = pFlsFree( 128 ); > + ok( !ret, "freeing fls index 128 (out of bounds) succeeded\n" ); > + ok( GetLastError() == ERROR_INVALID_PARAMETER, > + "freeing fls index 128 (out of bounds) wrong error %u\n", GetLastError() ); > > - ret = pFlsFree(fls); > - ok(ret, "FlsFree failed\n"); > - if (cbfunc) > - todo_wine ok(cbCount == 1, "Wrong callback count: %d\n", cbCount); > + SetLastError( 0xdeadbeef ); > + ret = pFlsSetValue( 128, (PVOID) 0x217 ); > + ok( !ret, "setting fls index 128 (out of bounds) succeeded\n" ); > + ok( GetLastError() == ERROR_INVALID_PARAMETER, > + "setting fls index 128 (out of bounds) wrong error %u\n", GetLastError() ); > + > + SetLastError( 0xdeadbeef ); > + val = pFlsGetValue( 128 ); It would make sense to test "val" aswell. > + ok( GetLastError() == ERROR_INVALID_PARAMETER, > + "setting fls index 128 (out of bounds) wrong error %u\n", GetLastError() ); The function above is no set function. > > - /* test index 0 */ > + /* Test index 0 */ > SetLastError( 0xdeadbeef ); > val = pFlsGetValue( 0 ); > ok( !val, "fls index 0 set to %p\n", val ); > @@ -196,6 +268,7 @@ static void test_FiberLocalStorage(PFLS_CALLBACK_FUNCTION cbfunc) > ok( !val, "fls index 0 wrong value %p\n", val ); > ok( GetLastError() == ERROR_INVALID_PARAMETER, "setting fls index wrong error %u\n", GetLastError() ); > > + /* Test creating an FLS index */ > fls = pFlsAlloc( NULL ); > ok( fls != FLS_OUT_OF_INDEXES, "FlsAlloc failed\n" ); > ok( fls != 0, "fls index 0 allocated\n" ); > @@ -205,11 +278,162 @@ static void test_FiberLocalStorage(PFLS_CALLBACK_FUNCTION cbfunc) > ok( ret, "setting fls index %u failed\n", fls ); > val = pFlsGetValue( fls ); > ok( val == (void *)0xdeadbeef, "fls index %u wrong value %p\n", fls, val ); > + ok( GetLastError() == ERROR_SUCCESS, > + "getting fls index %u failed with error %u\n", fls, GetLastError() ); > pFlsFree( fls ); > + > + /* Undefined behavior: verify the value is NULL after it the slot is freed */ > + val = pFlsGetValue( fls ); > + ok( val == NULL, "fls index %u wrong value %p\n", fls, val ); > + ok( GetLastError() == ERROR_SUCCESS, > + "getting fls index %u failed with error %u\n", fls, GetLastError() ); > + > + /* Undefined behavior: verify the value is settable after the slot is freed */ > ret = pFlsSetValue( fls, (void *)0xdeadbabe ); > ok( ret, "setting fls index %u failed\n", fls ); > val = pFlsGetValue( fls ); > ok( val == (void *)0xdeadbabe, "fls index %u wrong value %p\n", fls, val ); > + > + /* Try to create the same FLS index again, and verify that is initialized to NULL */ > + fls_2 = pFlsAlloc( NULL ); > + ok( fls != FLS_OUT_OF_INDEXES, "FlsAlloc failed\n" ); > + /* If this fails it is not an API error, but the test will be inconclusive */ > + ok( fls_2 == fls, "different FLS index allocated, was %u, now %u\n", fls, fls_2 ); > + val = pFlsGetValue( fls_2 ); > + ok( val == NULL, "fls index %u wrong value %p\n", fls, val ); > + ok( GetLastError() == ERROR_SUCCESS, > + "getting fls index %u failed with error %u\n", fls_2, GetLastError() ); A SetLastError() call is missing here, otherwise this test is not really convincing. > + pFlsFree( fls_2 ); > +} > + > +static void test_FiberLocalStorageCallback(PFLS_CALLBACK_FUNCTION cbfunc) { All the other functions have the "{" on the next line. > + DWORD fls; > + BOOL ret; > + PVOID val, val2; > + > + if (!pFlsAlloc || !pFlsSetValue || !pFlsGetValue || !pFlsFree) > + { > + win_skip( "Fiber Local Storage not supported\n" ); > + return; > + } > + > + /* Test that the callback is executed */ > + SetLastError( 0xdeadbeef ); This is unnecessary. > + cbCount = 0; > + fls = pFlsAlloc( cbfunc ); > + ok( fls != FLS_OUT_OF_INDEXES, "FlsAlloc failed with error %u\n", GetLastError() ); > + > + SetLastError( 0xdeadbeef ); This also. > + val = (PVOID) 0x1587; > + fls_value_to_set = val; > + ret = pFlsSetValue( fls, val ); > + ok(ret, "FlsSetValue failed with error %u\n", GetLastError() ); > + > + val2 = pFlsGetValue( fls ); > + ok(val == val2, "FlsGetValue returned %p, expected %p\n", val2, val); > + > + SetLastError( 0xdeadbeef ); Same here. > + ret = pFlsFree( fls ); > + ok(ret, "FlsFree failed with error %u\n", GetLastError() ); > + todo_wine > + { > + ok( cbCount == 1, "Wrong callback count: %d\n", cbCount ); > + } > + > + /* Test that callback is not executed if value is NULL */ > + SetLastError( 0xdeadbeef ); Same here. > + cbCount = 0; > + fls = pFlsAlloc( cbfunc ); > + ok( fls != FLS_OUT_OF_INDEXES, "FlsAlloc failed with error %u\n", GetLastError() ); > + > + SetLastError( 0xdeadbeef ); Same here. > + ret = pFlsSetValue( fls, NULL ); > + ok( ret, "FlsSetValue failed with error %u\n", GetLastError() ); > + > + SetLastError( 0xdeadbeef ); Same here. > + pFlsFree( fls ); > + ok( ret, "FlsFree failed with error %u\n", GetLastError() ); > + ok( cbCount == 0, "Wrong callback count: %d\n", cbCount ); > +} > + > +static void test_FiberLocalStorageWithFibers(PFLS_CALLBACK_FUNCTION cbfunc) { > + PVOID val1 = (PVOID) 0x314; > + PVOID val2 = (PVOID) 0x152; > + BOOL ret; > + > + if (!pConvertThreadToFiber || !pSwitchToFiber || !pDeleteFiber || !pConvertFiberToThread) > + { > + win_skip( "Fibers not supported\n" ); > + return; > + } > + if (!pFlsAlloc || !pFlsFree || !pFlsSetValue || !pFlsGetValue) > + { > + win_skip( "Fiber Local Storage not supported\n" ); > + return; > + } > + > + > + fls_index_to_set = pFlsAlloc(cbfunc); > + ok(fls_index_to_set != FLS_OUT_OF_INDEXES, "FlsAlloc failed with error %d\n", GetLastError()); Not really critical, but in the code above you used %u for GetLastError values. > + > + test_ConvertThreadToFiber(); > + > + fiberCount = 0; > + cbCount = 0; > + fibers[1] = pCreateFiber(0,FiberMainProc,&testparam); > + fibers[2] = pCreateFiber(0,FiberMainProc,&testparam); > + ok(fibers[1] != 0, "CreateFiber failed with error %d\n", GetLastError()); > + ok(fibers[2] != 0, "CreateFiber failed with error %d\n", GetLastError()); CreateFiber returns a pointer, so it would be better to compare against NULL. > + ok(fiberCount == 0, "Wrong fiber count: %d\n", fiberCount); > + ok(cbCount == 0, "Wrong callback count: %d\n", cbCount); > + > + fiberCount = 0; > + cbCount = 0; > + fls_value_to_set = val1; > + pSwitchToFiber(fibers[1]); > + ok(fiberCount == 1, "Wrong fiber count: %d\n", fiberCount); > + ok(cbCount == 0, "Wrong callback count: %d\n", cbCount); > + > + fiberCount = 0; > + cbCount = 0; > + fls_value_to_set = val2; > + pSwitchToFiber(fibers[2]); > + ok(fiberCount == 1, "Wrong fiber count: %d\n", fiberCount); > + ok(cbCount == 0, "Wrong callback count: %d\n", cbCount); > + > + fls_value_to_set = val2; > + ret = pFlsSetValue(fls_index_to_set, fls_value_to_set); > + ok(ret, "FlsSetValue failed\n"); > + ok(val2 == pFlsGetValue(fls_index_to_set), "FlsGetValue failed\n"); > + > + fiberCount = 0; > + cbCount = 0; > + fls_value_to_set = val1; > + pDeleteFiber(fibers[1]); > + ok(fiberCount == 0, "Wrong fiber count: %d\n", fiberCount); > + todo_wine > + { > + ok(cbCount == 1, "Wrong callback count: %d\n", cbCount); > + } > + > + fiberCount = 0; > + cbCount = 0; > + fls_value_to_set = val2; > + pFlsFree(fls_index_to_set); > + ok(fiberCount == 0, "Wrong fiber count: %d\n", fiberCount); > + todo_wine > + { > + ok(cbCount == 2, "Wrong callback count: %d\n", cbCount); > + } > + > + fiberCount = 0; > + cbCount = 0; > + fls_value_to_set = val1; > + pDeleteFiber(fibers[2]); > + ok(fiberCount == 0, "Wrong fiber count: %d\n", fiberCount); > + ok(cbCount == 0, "Wrong callback count: %d\n", cbCount); > + > + test_ConvertFiberToThread(); > } > > START_TEST(fiber) > @@ -223,6 +447,7 @@ START_TEST(fiber) > } > > test_FiberHandling(); > - test_FiberLocalStorage(NULL); > - test_FiberLocalStorage(FiberLocalStorageProc); > + test_FiberLocalStorage(); > + test_FiberLocalStorageCallback(FiberLocalStorageProc); > + test_FiberLocalStorageWithFibers(FiberLocalStorageProc); > } >

2 2

Re: [PATCH 3/3] wined3d/resource: Performance improvements, try 2
by Marvin July 11, 2016

July 11, 2016

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=24152 Your paranoid android. === w8 (32 bit visual) === visual.c:8177: Test failed: Input test: Quad 3(2crd-wrongidx) returned color 0x00ff00ff, expected 0x00ff0080 visual.c:8345: Test failed: Got unexpected color 0x00ff0000 for no color attribute test. visual.c:4529: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 0. visual.c:4529: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 512. === w864 (32 bit visual) === visual.c:4529: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 0. visual.c:4529: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 512. === w1064 (32 bit visual) === visual.c:4529: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 0. visual.c:4529: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 512. === w864 (64 bit visual) === visual.c:4529: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 0. visual.c:4529: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 512. === w1064 (64 bit visual) === visual.c:4529: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 0. visual.c:4529: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 512.

1 0

Re: [PATCH 1/3] d3d9/tests/visual: Add Vertexbuffer locking tests, try 2
by Marvin July 11, 2016

July 11, 2016

Hi, While running your changed tests on Windows, I think I found new failures. Being a bot and all I'm not very good at pattern recognition, so I might be wrong, but could you please double-check? Full results can be found at https://testbot.winehq.org/JobDetails.pl?Key=24150 Your paranoid android. === w8 (32 bit visual) === visual.c:4524: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 0. visual.c:4524: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 512. === w864 (32 bit visual) === visual.c:4524: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 0. visual.c:4524: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 512. === w1064 (32 bit visual) === visual.c:4524: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 0. visual.c:4524: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 512. === w864 (64 bit visual) === visual.c:4524: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 0. visual.c:4524: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 512. === w1064 (64 bit visual) === visual.c:4524: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 0. visual.c:4524: Test failed: Expected buffer mapped unsyncronized. Flags = D3DLOCK_NOOVERWRITE | D3DLOCK_DISCARD. Usage = 512.

1 0