March 2020 - Wine-Devel - list.winehq.org

RFC How to get rid of "always new" TestBot false positives?
by Francois Gouget March 31, 2020

March 31, 2020

So I'm resubmitting this patch hoping for some feedback since the last time it just dropped off the mailing list [1]. The issue is that some test failures include values that change on every run which prevents the TestBot from knowing whether they are new or not. In turn this means the TestBot systematically blames the author of whichever patch is being tested for these failures. Here are some examples: * user32:msg - Test failed: hwnd 0028050C message 0738 The message value is important: an unexpected 0738 message has a completely different cause than an unexpected WM_MOUSEFIRST message. So the TestBot should not consider a failure about message 0738 to be identical to a failure about message 0200. But the value of the window handle does not change the nature of the message. So a failure about hwnd 0028050C is identical to one about hwnd 0043050E. * kernel32:comm - Test failed: WaitCommEvent used 1594 ms for waiting WaitCommEvent() took longer than expected and knowing by how much can inform on the right approach to deal with it. But a failure with a 1594 ms overrun is the same as one with a 869 ms overrun. * comctl32:datetime.c - Test failed: Expected 24/03/2020, got 2020/03/24 The failure message obviously changes every day (because this test can only be about the current date), and yet is the same. Because a basic string comparison of past failures to the current one always show they are different, the TestBot systematically claims that any patch involving these test units is bad. As anyone who cries wolf all the time, it ends up being ignored and thus is not serving its purpose. So the solution I propose is to add some delimiter around the variable parts so the TestBot can identify and ignore them when comparing failures. This way it will be able to identify the really meaningful changes. For instance one could enclose the irrelevant parts in double-parentheses [2] as follows: Test failed: hwnd ((0028050C)) message 0738 Test failed: WaitCommEvent used ((1594)) ms for waiting Test failed: Unexpected date value ((24/03/2020)), got ((2020/03/24)) [3] Pros: * This provides a quick way to significantly improve the TestBot results. Where fixing each and every one of these failures would likely take weeks if not months, adding parentheses where relevant could likely be done by a single developer (probably me) in a week or so. * With the "always new" failures out of the picture the Wine developers can focus on the rare intermittent ones, for which there is no quick fix. (Rare intermittent failures are those that happen less than 5% of the time and which are thus not present in a given test configuration's WineTest results history, but which still have a siginificant chance of happening when a patch is tested against 12 or more configurations: 3% < 5% but 12 * 3% = 36%); * If the only way to prevent these failures from showing up as "always new" is to fix the failure, it can be tempting to just remove the test or skip it in the cases where it fails (e.g. specific locales). This could mean losing valuable information about how Windows behaves. * We will get a steady stream of "always new" failures as new tests are added and the test configurations change (e.g. new Windows versions). Delimiting the variable parts provides a timely way to deal with these new issues. * The TestBot patch is really simple (single-liner, 4 lines with comments). Cons: * Once developers no longer get blamed all the time for these failures they may have less incentive to fix them. -> I don't really buy that argument. Wine developers have shown they can very well ignore these test failures for years and there is no consequence to doing so anyway. * There is a risk of failure messages containing the chosen delimiters for unrelated reasons. So using double-quotes as the delimiters as in "0028050C" would be a bad idea. -> But a carefully chosen delimiter greatly reduces that risk and in the worst case it will only cause a few failure messages to not be detected as new. [2] * This requires adding 'tagging' to (many) failure messages. -> While failure messages can be tagged preventively, only those that fail really must be tagged. Also I feel the 'tagging' is pretty minimal. [1] https://www.winehq.org/pipermail/wine-devel/2019-December/157168.html [2] I'm not dead set on double parentheses. I'm fine with anything that has a low false-positive probability. Note that this eliminates double-quotes, single parentheses "(360, 200)", curly brackets "{360, 200}", single angle brackets "exp<0000000000>", tildes (short pathnames), etc. But pretty much double-anything would work. Maybe double-angle brackets <<0028050C>>? [3] In this last example I feel that comparing the failure based on just "Expected, got" makes it too generic. diff --git a/testbot/lib/WineTestBot/LogUtils.pm b/testbot/lib/WineTestBot/LogUtils.pm index 27d38567ea..842ebc8808 100644 --- a/testbot/lib/WineTestBot/LogUtils.pm +++ b/testbot/lib/WineTestBot/LogUtils.pm @@ -1086,6 +1086,10 @@ sub _GetLineKey($) my ($Line) = @_; return undef if (!defined $Line); + # Remove variable parts. + # Use a non-greedy match to ensure the ignored part does not contain '))'. + $Line =~ s/$\(.+?$\)/(())/g; + # Remove the line number $Line =~ s/^([_a-z0-9]+\.c:)\d+:( Test (?:failed|succeeded inside todo block): )/$1$2/ -- Francois Gouget <fgouget(a)codeweavers.com>

5 15

[PATCH 13/13] dbghelp: Don't use system headers for ELF declarations.
by Jacek Caban March 31, 2020

March 31, 2020

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- configure.ac | 10 ---------- dlls/dbghelp/elf_module.c | 6 +----- dlls/dbghelp/image_private.h | 17 ----------------- 3 files changed, 1 insertion(+), 32 deletions(-)

1 0

[PATCH 12/13] dbghelp: Use local ELF constants definitaions.
by Jacek Caban March 31, 2020

March 31, 2020

Based on glibc. Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 61 +++++++++++++++++++++++++++++---------- 1 file changed, 46 insertions(+), 15 deletions(-)

1 0

[PATCH 11/13] dbghelp: Don't use ELF32_ST_BIND and ELF32_ST_TYPE macros.
by Jacek Caban March 31, 2020

March 31, 2020

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-)

1 0

[PATCH 10/13] dbghelp: Inline ELF magic constants.
by Jacek Caban March 31, 2020

March 31, 2020

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

1 0

[PATCH 09/13] dbghelp: Use local symbol table entry declaration.
by Jacek Caban March 31, 2020

March 31, 2020

Based on glibc. Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 38 +++++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-)

1 0

[PATCH 08/13] dbghelp: Use local dynamic section entry declaration.
by Jacek Caban March 31, 2020

March 31, 2020

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)

1 0

[PATCH 07/13] dbghelp: Use local ELF program segment header declaration.
by Jacek Caban March 31, 2020

March 31, 2020

Based on glibc. Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)

1 0

[PATCH 06/13] dbghelp: Use local elf_section_header declaration.
by Jacek Caban March 31, 2020

March 31, 2020

Based on glibc. Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 18 +++++++++++++++--- dlls/dbghelp/image_private.h | 18 +++++++++++++++--- 2 files changed, 30 insertions(+), 6 deletions(-)

1 0

[PATCH 05/13] dbghelp: Use local elf_header declaration.
by Jacek Caban March 31, 2020

March 31, 2020

Based on glibc. Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 22 +++++++++++++++++++--- dlls/dbghelp/image_private.h | 20 +++++++++++++++++++- 2 files changed, 38 insertions(+), 4 deletions(-)

1 0

[PATCH 04/13] dbghelp: Use local declarations of r_debug and link_map structs.
by Jacek Caban March 31, 2020

March 31, 2020

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 94 ++++++++++++++++----------------------- 1 file changed, 38 insertions(+), 56 deletions(-)

1 0

[PATCH 03/13] dbghelp: Use local AT_SYSINFO_EHDR definition.
by Jacek Caban March 31, 2020

March 31, 2020

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-)

1 0

[PATCH 02/13] dbghelp: Don't use *_NULL constants.
by Jacek Caban March 31, 2020

March 31, 2020

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 12 ++++++------ dlls/dbghelp/image_private.h | 6 ------ 2 files changed, 6 insertions(+), 12 deletions(-)

1 0

[PATCH 01/13] dbghelp: Use local NOTE_GNU_BUILD_ID declaration.
by Jacek Caban March 31, 2020

March 31, 2020

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/dbghelp/elf_module.c | 4 ---- dlls/dbghelp/image_private.h | 4 ---- dlls/dbghelp/module.c | 6 ++++-- 3 files changed, 4 insertions(+), 10 deletions(-)

1 0

[PATCH v2 6/6] wined3d: Move cursor size check against display mode out of wined3d_device_set_cursor_properties().
by Zhiyi Zhang March 31, 2020

March 31, 2020

Signed-off-by: Zhiyi Zhang <zzhang(a)codeweavers.com> --- dlls/d3d8/device.c | 22 ++++++++++++++++++++++ dlls/d3d9/device.c | 22 ++++++++++++++++++++++ dlls/wined3d/device.c | 15 --------------- 3 files changed, 44 insertions(+), 15 deletions(-) diff --git a/dlls/d3d8/device.c b/dlls/d3d8/device.c index 23e93df0616..3b3153c6d47 100644 --- a/dlls/d3d8/device.c +++ b/dlls/d3d8/device.c @@ -739,6 +739,8 @@ static HRESULT WINAPI d3d8_device_SetCursorProperties(IDirect3DDevice8 *iface, { struct d3d8_device *device = impl_from_IDirect3DDevice8(iface); struct d3d8_surface *bitmap_impl = unsafe_impl_from_IDirect3DSurface8(bitmap); + D3DSURFACE_DESC surface_desc; + D3DDISPLAYMODE mode; HRESULT hr; TRACE("iface %p, hotspot_x %u, hotspot_y %u, bitmap %p.\n", @@ -750,6 +752,26 @@ static HRESULT WINAPI d3d8_device_SetCursorProperties(IDirect3DDevice8 *iface, return D3DERR_INVALIDCALL; } + if (FAILED(hr = IDirect3DSurface8_GetDesc(bitmap, &surface_desc))) + { + WARN("Failed to get surface description, hr %#x.\n", hr); + return hr; + } + + if (FAILED(hr = IDirect3D8_GetAdapterDisplayMode(device->d3d_parent, device->adapter_ordinal, + &mode))) + { + WARN("Failed to get device display mode, hr %#x.\n", hr); + return hr; + } + + if (surface_desc.Width > mode.Width || surface_desc.Height > mode.Height) + { + WARN("Surface dimension %ux%u exceeds display mode %ux%u.\n", surface_desc.Width, + surface_desc.Height, mode.Width, mode.Height); + return D3DERR_INVALIDCALL; + } + wined3d_mutex_lock(); hr = wined3d_device_set_cursor_properties(device->wined3d_device, hotspot_x, hotspot_y, bitmap_impl->wined3d_texture, bitmap_impl->sub_resource_idx); diff --git a/dlls/d3d9/device.c b/dlls/d3d9/device.c index 61cb505d77a..53137da28f1 100644 --- a/dlls/d3d9/device.c +++ b/dlls/d3d9/device.c @@ -787,6 +787,8 @@ static HRESULT WINAPI d3d9_device_SetCursorProperties(IDirect3DDevice9Ex *iface, { struct d3d9_device *device = impl_from_IDirect3DDevice9Ex(iface); struct d3d9_surface *bitmap_impl = unsafe_impl_from_IDirect3DSurface9(bitmap); + D3DSURFACE_DESC surface_desc; + D3DDISPLAYMODE mode; HRESULT hr; TRACE("iface %p, hotspot_x %u, hotspot_y %u, bitmap %p.\n", @@ -798,6 +800,26 @@ static HRESULT WINAPI d3d9_device_SetCursorProperties(IDirect3DDevice9Ex *iface, return D3DERR_INVALIDCALL; } + if (FAILED(hr = IDirect3DSurface9_GetDesc(bitmap, &surface_desc))) + { + WARN("Failed to get surface description, hr %#x.\n", hr); + return hr; + } + + if (FAILED(hr = IDirect3D9_GetAdapterDisplayMode(&device->d3d_parent->IDirect3D9Ex_iface, + device->adapter_ordinal, &mode))) + { + WARN("Failed to get device display mode, hr %#x.\n", hr); + return hr; + } + + if (surface_desc.Width > mode.Width || surface_desc.Height > mode.Height) + { + WARN("Surface dimension %ux%u exceeds display mode %ux%u.\n", surface_desc.Width, + surface_desc.Height, mode.Width, mode.Height); + return D3DERR_INVALIDCALL; + } + wined3d_mutex_lock(); hr = wined3d_device_set_cursor_properties(device->wined3d_device, hotspot_x, hotspot_y, bitmap_impl->wined3d_texture, bitmap_impl->sub_resource_idx); diff --git a/dlls/wined3d/device.c b/dlls/wined3d/device.c index 05087fee244..ee007568d46 100644 --- a/dlls/wined3d/device.c +++ b/dlls/wined3d/device.c @@ -4910,9 +4910,7 @@ HRESULT CDECL wined3d_device_set_cursor_properties(struct wined3d_device *device { unsigned int texture_level = sub_resource_idx % texture->level_count; unsigned int cursor_width, cursor_height; - struct wined3d_display_mode mode; struct wined3d_map_desc map_desc; - HRESULT hr; TRACE("device %p, x_hotspot %u, y_hotspot %u, texture %p, sub_resource_idx %u.\n", device, x_hotspot, y_hotspot, texture, sub_resource_idx); @@ -4943,19 +4941,6 @@ HRESULT CDECL wined3d_device_set_cursor_properties(struct wined3d_device *device return WINED3DERR_INVALIDCALL; } - if (FAILED(hr = wined3d_output_get_display_mode(&device->adapter->outputs[0], &mode, NULL))) - { - ERR("Failed to get display mode, hr %#x.\n", hr); - return WINED3DERR_INVALIDCALL; - } - - if (cursor_width > mode.width || cursor_height > mode.height) - { - WARN("Texture %p, sub-resource %u dimensions are %ux%u, but screen dimensions are %ux%u.\n", - texture, sub_resource_idx, cursor_width, cursor_height, mode.width, mode.height); - return WINED3DERR_INVALIDCALL; - } - /* Do not store the surface's pointer because the application may * release it after setting the cursor image. Windows doesn't * addref the set surface, so we can't do this either without -- 2.20.1

2 1

[PATCH v2 5/6] wined3d: Check cursor sizes are powers of two.
by Zhiyi Zhang March 31, 2020

March 31, 2020

Signed-off-by: Zhiyi Zhang <zzhang(a)codeweavers.com> --- dlls/d3d8/tests/device.c | 1 - dlls/d3d9/tests/device.c | 1 - dlls/wined3d/device.c | 13 +++++++++---- 3 files changed, 9 insertions(+), 6 deletions(-) diff --git a/dlls/d3d8/tests/device.c b/dlls/d3d8/tests/device.c index c96adfc7481..6bb8ab3a02b 100644 --- a/dlls/d3d8/tests/device.c +++ b/dlls/d3d8/tests/device.c @@ -1027,7 +1027,6 @@ static void test_cursor(void) expected_hr = D3D_OK; else expected_hr = D3DERR_INVALIDCALL; - todo_wine_if(expected_hr == D3DERR_INVALIDCALL) ok(hr == expected_hr, "Test %u: Expect SetCursorProperties return %#x, got %#x.\n", test_idx, expected_hr, hr); IDirect3DSurface8_Release(cursor); diff --git a/dlls/d3d9/tests/device.c b/dlls/d3d9/tests/device.c index 0b6668d12b9..efcd630e2df 100644 --- a/dlls/d3d9/tests/device.c +++ b/dlls/d3d9/tests/device.c @@ -1839,7 +1839,6 @@ static void test_cursor(void) expected_hr = D3D_OK; else expected_hr = D3DERR_INVALIDCALL; - todo_wine_if(expected_hr == D3DERR_INVALIDCALL) ok(hr == expected_hr, "Test %u: Expect SetCursorProperties return %#x, got %#x.\n", test_idx, expected_hr, hr); IDirect3DSurface9_Release(cursor); diff --git a/dlls/wined3d/device.c b/dlls/wined3d/device.c index f8caa0c23c6..05087fee244 100644 --- a/dlls/wined3d/device.c +++ b/dlls/wined3d/device.c @@ -4934,14 +4934,21 @@ HRESULT CDECL wined3d_device_set_cursor_properties(struct wined3d_device *device return WINED3DERR_INVALIDCALL; } + /* Cursor width and height must all be powers of two */ + cursor_width = wined3d_texture_get_level_width(texture, texture_level); + cursor_height = wined3d_texture_get_level_height(texture, texture_level); + if ((cursor_width & (cursor_width - 1)) || (cursor_height & (cursor_height - 1))) + { + WARN("Cursor size %ux%u are not all powers of two.\n", cursor_width, cursor_height); + return WINED3DERR_INVALIDCALL; + } + if (FAILED(hr = wined3d_output_get_display_mode(&device->adapter->outputs[0], &mode, NULL))) { ERR("Failed to get display mode, hr %#x.\n", hr); return WINED3DERR_INVALIDCALL; } - cursor_width = wined3d_texture_get_level_width(texture, texture_level); - cursor_height = wined3d_texture_get_level_height(texture, texture_level); if (cursor_width > mode.width || cursor_height > mode.height) { WARN("Texture %p, sub-resource %u dimensions are %ux%u, but screen dimensions are %ux%u.\n", @@ -4949,8 +4956,6 @@ HRESULT CDECL wined3d_device_set_cursor_properties(struct wined3d_device *device return WINED3DERR_INVALIDCALL; } - /* TODO: MSDN: Cursor sizes must be a power of 2 */ - /* Do not store the surface's pointer because the application may * release it after setting the cursor image. Windows doesn't * addref the set surface, so we can't do this either without -- 2.20.1

3 2

[PATCH v2 4/6] d3d9/tests: Add cursor size tests.
by Zhiyi Zhang March 31, 2020

March 31, 2020

Signed-off-by: Zhiyi Zhang <zzhang(a)codeweavers.com> --- dlls/d3d9/tests/device.c | 99 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 98 insertions(+), 1 deletion(-) diff --git a/dlls/d3d9/tests/device.c b/dlls/d3d9/tests/device.c index 74d330c80bc..0b6668d12b9 100644 --- a/dlls/d3d9/tests/device.c +++ b/dlls/d3d9/tests/device.c @@ -1742,16 +1742,30 @@ cleanup: static void test_cursor(void) { + unsigned int adapter_idx, adapter_count, test_idx; IDirect3DSurface9 *cursor = NULL; + struct device_desc device_desc; + unsigned int width, height; IDirect3DDevice9 *device; + HRESULT expected_hr, hr; + D3DDISPLAYMODE mode; CURSORINFO info; IDirect3D9 *d3d; ULONG refcount; HCURSOR cur; HWND window; - HRESULT hr; BOOL ret; + static const DWORD device_flags[] = {0, CREATE_DEVICE_FULLSCREEN}; + static const SIZE cursor_sizes[] = + { + {1, 1}, + {2, 4}, + {3, 2}, + {2, 3}, + {6, 6}, + }; + window = create_window(); ok(!!window, "Failed to create a window.\n"); @@ -1812,8 +1826,91 @@ static void test_cursor(void) ok(info.flags & (CURSOR_SHOWING|CURSOR_SUPPRESSED), "The gdi cursor is hidden (%08x)\n", info.flags); ok(info.hCursor != cur, "The cursor handle is %p\n", info.hCursor); + /* Cursor dimensions must all be powers of two */ + for (test_idx = 0; test_idx < ARRAY_SIZE(cursor_sizes); ++test_idx) + { + width = cursor_sizes[test_idx].cx; + height = cursor_sizes[test_idx].cy; + hr = IDirect3DDevice9_CreateOffscreenPlainSurface(device, width, height, D3DFMT_A8R8G8B8, + D3DPOOL_DEFAULT, &cursor, NULL); + ok(hr == D3D_OK, "Test %u: CreateOffscreenPlainSurface failed, hr %#x.\n", test_idx, hr); + hr = IDirect3DDevice9_SetCursorProperties(device, 0, 0, cursor); + if (width && !(width & (width - 1)) && height && !(height & (height - 1))) + expected_hr = D3D_OK; + else + expected_hr = D3DERR_INVALIDCALL; + todo_wine_if(expected_hr == D3DERR_INVALIDCALL) + ok(hr == expected_hr, "Test %u: Expect SetCursorProperties return %#x, got %#x.\n", + test_idx, expected_hr, hr); + IDirect3DSurface9_Release(cursor); + } + refcount = IDirect3DDevice9_Release(device); ok(!refcount, "Device has %u references left.\n", refcount); + + /* Cursor dimensions must not exceed adapter display mode */ + device_desc.device_window = window; + device_desc.width = 640; + device_desc.height = 480; + + adapter_count = IDirect3D9_GetAdapterCount(d3d); + for (adapter_idx = 0; adapter_idx < adapter_count; ++adapter_idx) + { + for (test_idx = 0; test_idx < ARRAY_SIZE(device_flags); ++test_idx) + { + device_desc.adapter_ordinal = adapter_idx; + device_desc.flags = device_flags[test_idx]; + if (!(device = create_device(d3d, window, &device_desc))) + { + skip("Adapter %u test %u: Failed to create a D3D device.\n", adapter_idx, test_idx); + break; + } + + hr = IDirect3D9_GetAdapterDisplayMode(d3d, adapter_idx, &mode); + ok(hr == D3D_OK, "Adapter %u test %u: GetAdapterDisplayMode failed, hr %#x.\n", + adapter_idx, test_idx, hr); + + /* Find the largest width and height that are powers of two and less than the display mode */ + width = 1; + height = 1; + while (width * 2 <= mode.Width) + width *= 2; + while (height * 2 <= mode.Height) + height *= 2; + + hr = IDirect3DDevice9_CreateOffscreenPlainSurface(device, width, height, + D3DFMT_A8R8G8B8, D3DPOOL_DEFAULT, &cursor, NULL); + ok(hr == D3D_OK, "Adapter %u test %u: CreateOffscreenPlainSurface failed, hr %#x.\n", + adapter_idx, test_idx, hr); + hr = IDirect3DDevice9_SetCursorProperties(device, 0, 0, cursor); + ok(hr == D3D_OK, "Adapter %u test %u: SetCursorProperties failed, hr %#x.\n", + adapter_idx, test_idx, hr); + IDirect3DSurface9_Release(cursor); + + hr = IDirect3DDevice9_CreateOffscreenPlainSurface(device, width * 2, height, + D3DFMT_A8R8G8B8, D3DPOOL_DEFAULT, &cursor, NULL); + ok(hr == D3D_OK, "Adapter %u test %u: CreateOffscreenPlainSurface failed, hr %#x.\n", + adapter_idx, test_idx, hr); + hr = IDirect3DDevice9_SetCursorProperties(device, 0, 0, cursor); + ok(hr == D3DERR_INVALIDCALL, + "Adapter %u test %u: Expect SetCursorProperties return %#x, got %#x.\n", + adapter_idx, test_idx, D3DERR_INVALIDCALL, hr); + IDirect3DSurface9_Release(cursor); + + hr = IDirect3DDevice9_CreateOffscreenPlainSurface(device, width, height * 2, + D3DFMT_A8R8G8B8, D3DPOOL_DEFAULT, &cursor, NULL); + ok(hr == D3D_OK, "Adapter %u test %u: CreateOffscreenPlainSurface failed, hr %#x.\n", + adapter_idx, test_idx, hr); + hr = IDirect3DDevice9_SetCursorProperties(device, 0, 0, cursor); + ok(hr == D3DERR_INVALIDCALL, + "Adapter %u test %u: Expect SetCursorProperties return %#x, got %#x.\n", + adapter_idx, test_idx, D3DERR_INVALIDCALL, hr); + IDirect3DSurface9_Release(cursor); + + refcount = IDirect3DDevice9_Release(device); + ok(!refcount, "Adapter %u: Device has %u references left.\n", adapter_idx, refcount); + } + } cleanup: IDirect3D9_Release(d3d); DestroyWindow(window); -- 2.20.1

2 1

[PATCH v2 3/6] d3d8/tests: Add cursor size tests.
by Zhiyi Zhang March 31, 2020

March 31, 2020

Signed-off-by: Zhiyi Zhang <zzhang(a)codeweavers.com> --- dlls/d3d8/tests/device.c | 97 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 96 insertions(+), 1 deletion(-) diff --git a/dlls/d3d8/tests/device.c b/dlls/d3d8/tests/device.c index b7aa02adabb..c96adfc7481 100644 --- a/dlls/d3d8/tests/device.c +++ b/dlls/d3d8/tests/device.c @@ -931,16 +931,30 @@ cleanup: static void test_cursor(void) { + unsigned int adapter_idx, adapter_count, test_idx; IDirect3DSurface8 *cursor = NULL; + struct device_desc device_desc; + unsigned int width, height; IDirect3DDevice8 *device; + HRESULT expected_hr, hr; + D3DDISPLAYMODE mode; CURSORINFO info; IDirect3D8 *d3d; ULONG refcount; HCURSOR cur; HWND window; - HRESULT hr; BOOL ret; + static const DWORD device_flags[] = {0, CREATE_DEVICE_FULLSCREEN}; + static const SIZE cursor_sizes[] = + { + {1, 1}, + {2, 4}, + {3, 2}, + {2, 3}, + {6, 6}, + }; + window = create_window(); ok(!!window, "Failed to create a window.\n"); @@ -1001,8 +1015,89 @@ static void test_cursor(void) ok(info.flags & (CURSOR_SHOWING|CURSOR_SUPPRESSED), "The gdi cursor is hidden (%08x)\n", info.flags); ok(info.hCursor != cur, "The cursor handle is %p\n", info.hCursor); + /* Cursor dimensions must all be powers of two */ + for (test_idx = 0; test_idx < ARRAY_SIZE(cursor_sizes); ++test_idx) + { + width = cursor_sizes[test_idx].cx; + height = cursor_sizes[test_idx].cy; + hr = IDirect3DDevice8_CreateImageSurface(device, width, height, D3DFMT_A8R8G8B8, &cursor); + ok(hr == D3D_OK, "Test %u: CreateImageSurface failed, hr %#x.\n", test_idx, hr); + hr = IDirect3DDevice8_SetCursorProperties(device, 0, 0, cursor); + if (width && !(width & (width - 1)) && height && !(height & (height - 1))) + expected_hr = D3D_OK; + else + expected_hr = D3DERR_INVALIDCALL; + todo_wine_if(expected_hr == D3DERR_INVALIDCALL) + ok(hr == expected_hr, "Test %u: Expect SetCursorProperties return %#x, got %#x.\n", + test_idx, expected_hr, hr); + IDirect3DSurface8_Release(cursor); + } + refcount = IDirect3DDevice8_Release(device); ok(!refcount, "Device has %u references left.\n", refcount); + + /* Cursor dimensions must not exceed adapter display mode */ + device_desc.device_window = window; + device_desc.width = 640; + device_desc.height = 480; + + adapter_count = IDirect3D8_GetAdapterCount(d3d); + for (adapter_idx = 0; adapter_idx < adapter_count; ++adapter_idx) + { + for (test_idx = 0; test_idx < ARRAY_SIZE(device_flags); ++test_idx) + { + device_desc.adapter_ordinal = adapter_idx; + device_desc.flags = device_flags[test_idx]; + if (!(device = create_device(d3d, window, &device_desc))) + { + skip("Adapter %u test %u: Failed to create a D3D device.\n", adapter_idx, test_idx); + break; + } + + hr = IDirect3D8_GetAdapterDisplayMode(d3d, adapter_idx, &mode); + ok(hr == D3D_OK, "Adapter %u test %u: GetAdapterDisplayMode failed, hr %#x.\n", + adapter_idx, test_idx, hr); + + /* Find the largest width and height that are powers of two and less than the display mode */ + width = 1; + height = 1; + while (width * 2 <= mode.Width) + width *= 2; + while (height * 2 <= mode.Height) + height *= 2; + + hr = IDirect3DDevice8_CreateImageSurface(device, width, height, D3DFMT_A8R8G8B8, &cursor); + ok(hr == D3D_OK, "Adapter %u test %u: CreateImageSurface failed, hr %#x.\n", + adapter_idx, test_idx, hr); + hr = IDirect3DDevice8_SetCursorProperties(device, 0, 0, cursor); + ok(hr == D3D_OK, "Adapter %u test %u: SetCursorProperties failed, hr %#x.\n", + adapter_idx, test_idx, hr); + IDirect3DSurface8_Release(cursor); + + hr = IDirect3DDevice8_CreateImageSurface(device, width * 2, height, D3DFMT_A8R8G8B8, + &cursor); + ok(hr == D3D_OK, "Adapter %u test %u: CreateImageSurface failed, hr %#x.\n", + adapter_idx, test_idx, hr); + hr = IDirect3DDevice8_SetCursorProperties(device, 0, 0, cursor); + ok(hr == D3DERR_INVALIDCALL, + "Adapter %u test %u: Expect SetCursorProperties return %#x, got %#x.\n", + adapter_idx, test_idx, D3DERR_INVALIDCALL, hr); + IDirect3DSurface8_Release(cursor); + + hr = IDirect3DDevice8_CreateImageSurface(device, width, height * 2, D3DFMT_A8R8G8B8, + &cursor); + ok(hr == D3D_OK, "Adapter %u test %u: CreateImageSurface failed, hr %#x.\n", + adapter_idx, test_idx, hr); + hr = IDirect3DDevice8_SetCursorProperties(device, 0, 0, cursor); + ok(hr == D3DERR_INVALIDCALL, + "Adapter %u test %u: Expect SetCursorProperties return %#x, got %#x.\n", + adapter_idx, test_idx, D3DERR_INVALIDCALL, hr); + IDirect3DSurface8_Release(cursor); + + refcount = IDirect3DDevice8_Release(device); + ok(!refcount, "Adapter %u: Device has %u references left.\n", adapter_idx, refcount); + } + } cleanup: IDirect3D8_Release(d3d); DestroyWindow(window); -- 2.20.1

2 1

[PATCH v2 2/6] d3d9/tests: Fix possible test failures.
by Zhiyi Zhang March 31, 2020

March 31, 2020

expect_messages points to a local variable. When it goes out of scope, it reads into random memory, causing failures. Signed-off-by: Zhiyi Zhang <zzhang(a)codeweavers.com> --- dlls/d3d9/tests/d3d9ex.c | 17 +++++++++++++---- dlls/d3d9/tests/device.c | 21 +++++++++++++++++---- 2 files changed, 30 insertions(+), 8 deletions(-) diff --git a/dlls/d3d9/tests/d3d9ex.c b/dlls/d3d9/tests/d3d9ex.c index 5b24f6b05eb..dab5cf6d8df 100644 --- a/dlls/d3d9/tests/d3d9ex.c +++ b/dlls/d3d9/tests/d3d9ex.c @@ -2631,6 +2631,7 @@ static void test_wndproc(void) { struct wndproc_thread_param thread_params; struct device_desc device_desc; + static WINDOWPOS windowpos; IDirect3DDevice9Ex *device; WNDCLASSA wc = {0}; HANDLE thread; @@ -2646,7 +2647,6 @@ static void test_wndproc(void) LONG change_ret, device_style; BOOL ret; IDirect3D9Ex *d3d9ex; - WINDOWPOS windowpos; static const struct message create_messages[] = { @@ -2747,7 +2747,7 @@ static void test_wndproc(void) /* WM_SIZE(SIZE_MAXIMIZED) is unreliable on native. */ {0, 0, FALSE, 0}, }; - struct message mode_change_messages[] = + static const struct message mode_change_messages[] = { {WM_WINDOWPOSCHANGING, DEVICE_WINDOW, FALSE, 0}, {WM_WINDOWPOSCHANGED, DEVICE_WINDOW, FALSE, 0}, @@ -2760,7 +2760,7 @@ static void test_wndproc(void) * ShowWindow does not send such a message because the window is already visible. */ {0, 0, FALSE, 0}, }; - struct message mode_change_messages_hidden[] = + static const struct message mode_change_messages_hidden[] = { {WM_WINDOWPOSCHANGING, DEVICE_WINDOW, FALSE, 0}, {WM_WINDOWPOSCHANGED, DEVICE_WINDOW, FALSE, 0}, @@ -2777,7 +2777,7 @@ static void test_wndproc(void) {WM_DISPLAYCHANGE, FOCUS_WINDOW, FALSE, 0}, {0, 0, FALSE, 0}, }; - struct + static const struct { DWORD create_flags; const struct message *focus_loss_messages; @@ -2859,6 +2859,9 @@ static void test_wndproc(void) return; } + filter_messages = NULL; + expect_messages = NULL; + wc.lpfnWndProc = test_proc; wc.lpszClassName = "d3d9_test_wndproc_wc"; ok(RegisterClassA(&wc), "Failed to register window class.\n"); @@ -3189,6 +3192,7 @@ static void test_wndproc(void) flush_events(); ok(!expect_messages->message, "Expected message %#x for window %#x, but didn't receive it, i=%u.\n", expect_messages->message, expect_messages->window, i); + expect_messages = NULL; /* World of Warplanes hides the window by removing WS_VISIBLE and expects Reset() to show it again. */ device_style = GetWindowLongA(device_window, GWL_STYLE); @@ -3208,6 +3212,7 @@ static void test_wndproc(void) flush_events(); ok(!expect_messages->message, "Expected message %#x for window %#x, but didn't receive it, i=%u.\n", expect_messages->message, expect_messages->window, i); + expect_messages = NULL; if (!(tests[i].create_flags & CREATE_DEVICE_NOWINDOWCHANGES)) { @@ -3244,6 +3249,7 @@ static void test_wndproc(void) done: filter_messages = NULL; + expect_messages = NULL; DestroyWindow(device_window); DestroyWindow(focus_window); SetEvent(thread_params.test_finished); @@ -3270,6 +3276,9 @@ static void test_wndproc_windowed(void) DWORD res, tid; HWND tmp; + filter_messages = NULL; + expect_messages = NULL; + wc.lpfnWndProc = test_proc; wc.lpszClassName = "d3d9_test_wndproc_wc"; ok(RegisterClassA(&wc), "Failed to register window class.\n"); diff --git a/dlls/d3d9/tests/device.c b/dlls/d3d9/tests/device.c index 839c0301853..74d330c80bc 100644 --- a/dlls/d3d9/tests/device.c +++ b/dlls/d3d9/tests/device.c @@ -3655,6 +3655,7 @@ static void test_wndproc(void) { struct wndproc_thread_param thread_params; struct device_desc device_desc; + static WINDOWPOS windowpos; IDirect3DDevice9 *device; WNDCLASSA wc = {0}; IDirect3D9 *d3d9; @@ -3670,7 +3671,6 @@ static void test_wndproc(void) DEVMODEW devmode; LONG change_ret, device_style; BOOL ret; - WINDOWPOS windowpos; static const struct message create_messages[] = { @@ -3784,7 +3784,7 @@ static void test_wndproc(void) /* WM_SIZE(SIZE_MAXIMIZED) is unreliable on native. */ {0, 0, FALSE, 0}, }; - struct message mode_change_messages[] = + static const struct message mode_change_messages[] = { {WM_WINDOWPOSCHANGING, DEVICE_WINDOW, FALSE, 0}, {WM_WINDOWPOSCHANGED, DEVICE_WINDOW, FALSE, 0}, @@ -3797,7 +3797,7 @@ static void test_wndproc(void) * ShowWindow does not send such a message because the window is already visible. */ {0, 0, FALSE, 0}, }; - struct message mode_change_messages_hidden[] = + static const struct message mode_change_messages_hidden[] = { {WM_WINDOWPOSCHANGING, DEVICE_WINDOW, FALSE, 0}, {WM_WINDOWPOSCHANGED, DEVICE_WINDOW, FALSE, 0}, @@ -3814,7 +3814,7 @@ static void test_wndproc(void) {WM_DISPLAYCHANGE, FOCUS_WINDOW, FALSE, 0}, {0, 0, FALSE, 0}, }; - struct + static const struct { DWORD create_flags; const struct message *focus_loss_messages, *reactivate_messages; @@ -3893,6 +3893,9 @@ static void test_wndproc(void) return; } + filter_messages = NULL; + expect_messages = NULL; + wc.lpfnWndProc = test_proc; wc.lpszClassName = "d3d9_test_wndproc_wc"; ok(RegisterClassA(&wc), "Failed to register window class.\n"); @@ -4258,6 +4261,7 @@ static void test_wndproc(void) flush_events(); ok(!expect_messages->message, "Expected message %#x for window %#x, but didn't receive it, i=%u.\n", expect_messages->message, expect_messages->window, i); + expect_messages = NULL; /* World of Warplanes hides the window by removing WS_VISIBLE and expects Reset() to show it again. */ device_style = GetWindowLongA(device_window, GWL_STYLE); @@ -4277,6 +4281,7 @@ static void test_wndproc(void) flush_events(); ok(!expect_messages->message, "Expected message %#x for window %#x, but didn't receive it, i=%u.\n", expect_messages->message, expect_messages->window, i); + expect_messages = NULL; if (!(tests[i].create_flags & CREATE_DEVICE_NOWINDOWCHANGES)) { @@ -4314,6 +4319,7 @@ static void test_wndproc(void) done: filter_messages = NULL; + expect_messages = NULL; DestroyWindow(device_window); DestroyWindow(focus_window); SetEvent(thread_params.test_finished); @@ -4344,6 +4350,9 @@ static void test_wndproc_windowed(void) d3d9 = Direct3DCreate9(D3D_SDK_VERSION); ok(!!d3d9, "Failed to create a D3D object.\n"); + filter_messages = NULL; + expect_messages = NULL; + wc.lpfnWndProc = test_proc; wc.lpszClassName = "d3d9_test_wndproc_wc"; ok(RegisterClassA(&wc), "Failed to register window class.\n"); @@ -4557,6 +4566,7 @@ static void test_reset_fullscreen(void) d3d = Direct3DCreate9(D3D_SDK_VERSION); ok(!!d3d, "Failed to create a D3D object.\n"); + filter_messages = NULL; expect_messages = messages; wc.cbSize = sizeof(wc); @@ -5259,6 +5269,9 @@ static void test_device_window_reset(void) HRESULT hr; ULONG ref; + filter_messages = NULL; + expect_messages = NULL; + wc.lpfnWndProc = test_proc; wc.lpszClassName = "d3d9_test_wndproc_wc"; ok(RegisterClassA(&wc), "Failed to register window class.\n"); -- 2.20.1

3 2

[PATCH v2 1/6] d3d8/tests: Fix possible test failures.
by Zhiyi Zhang March 31, 2020

March 31, 2020

expect_messages points to a local variable. When it goes out of scope, it reads into random memory, causing failures. Signed-off-by: Zhiyi Zhang <zzhang(a)codeweavers.com> --- v2: Supersede 182264~182270 dlls/d3d8/tests/device.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/dlls/d3d8/tests/device.c b/dlls/d3d8/tests/device.c index d87832b716d..b7aa02adabb 100644 --- a/dlls/d3d8/tests/device.c +++ b/dlls/d3d8/tests/device.c @@ -2662,6 +2662,7 @@ static void test_wndproc(void) { struct wndproc_thread_param thread_params; struct device_desc device_desc; + static WINDOWPOS windowpos; IDirect3DDevice8 *device; WNDCLASSA wc = {0}; IDirect3D8 *d3d8; @@ -2677,7 +2678,6 @@ static void test_wndproc(void) DEVMODEW devmode; LONG change_ret, device_style; BOOL ret; - WINDOWPOS windowpos; static const struct message create_messages[] = { @@ -2777,7 +2777,7 @@ static void test_wndproc(void) {WM_SIZE, FOCUS_WINDOW, TRUE, SIZE_MAXIMIZED}, {0, 0, FALSE, 0}, }; - struct message mode_change_messages[] = + static const struct message mode_change_messages[] = { {WM_WINDOWPOSCHANGING, DEVICE_WINDOW, FALSE, 0}, {WM_WINDOWPOSCHANGED, DEVICE_WINDOW, FALSE, 0}, @@ -2790,7 +2790,7 @@ static void test_wndproc(void) * ShowWindow does not send such a message because the window is already visible. */ {0, 0, FALSE, 0}, }; - struct message mode_change_messages_hidden[] = + static const struct message mode_change_messages_hidden[] = { {WM_WINDOWPOSCHANGING, DEVICE_WINDOW, FALSE, 0}, {WM_WINDOWPOSCHANGED, DEVICE_WINDOW, FALSE, 0}, @@ -2857,6 +2857,9 @@ static void test_wndproc(void) return; } + filter_messages = NULL; + expect_messages = NULL; + wc.lpfnWndProc = test_proc; wc.lpszClassName = "d3d8_test_wndproc_wc"; ok(RegisterClassA(&wc), "Failed to register window class.\n"); @@ -3200,6 +3203,7 @@ static void test_wndproc(void) flush_events(); ok(!expect_messages->message, "Expected message %#x for window %#x, but didn't receive it, i=%u.\n", expect_messages->message, expect_messages->window, i); + expect_messages = NULL; /* World of Warplanes hides the window by removing WS_VISIBLE and expects Reset() to show it again. */ device_style = GetWindowLongA(device_window, GWL_STYLE); @@ -3219,6 +3223,7 @@ static void test_wndproc(void) flush_events(); ok(!expect_messages->message, "Expected message %#x for window %#x, but didn't receive it.\n", expect_messages->message, expect_messages->window); + expect_messages = NULL; ok(windowpos.hwnd == device_window && !windowpos.hwndInsertAfter && !windowpos.x && !windowpos.y && !windowpos.cx && !windowpos.cy @@ -3242,6 +3247,7 @@ static void test_wndproc(void) done: filter_messages = NULL; + expect_messages = NULL; IDirect3D8_Release(d3d8); SetEvent(thread_params.test_finished); @@ -3272,6 +3278,9 @@ static void test_wndproc_windowed(void) d3d8 = Direct3DCreate8(D3D_SDK_VERSION); ok(!!d3d8, "Failed to create a D3D object.\n"); + filter_messages = NULL; + expect_messages = NULL; + wc.lpfnWndProc = test_proc; wc.lpszClassName = "d3d8_test_wndproc_wc"; ok(RegisterClassA(&wc), "Failed to register window class.\n"); @@ -4177,6 +4186,9 @@ static void test_device_window_reset(void) HRESULT hr; ULONG ref; + filter_messages = NULL; + expect_messages = NULL; + wc.lpfnWndProc = test_proc; wc.lpszClassName = "d3d8_test_wndproc_wc"; ok(RegisterClassA(&wc), "Failed to register window class.\n"); -- 2.20.1

3 2

[PATCH 10/10] d3d8: Introduce a helper to convert d3d8 primitive types to wined3d types.
by Henri Verbeet March 31, 2020

March 31, 2020

From: Chip Davis <cdavis(a)codeweavers.com> Signed-off-by: Chip Davis <cdavis(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- dlls/d3d8/device.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/dlls/d3d8/device.c b/dlls/d3d8/device.c index e094fef002c..ba6ac7717a0 100644 --- a/dlls/d3d8/device.c +++ b/dlls/d3d8/device.c @@ -449,6 +449,11 @@ static enum wined3d_render_state wined3d_render_state_from_d3d(D3DRENDERSTATETYP return (enum wined3d_render_state)state; } +static enum wined3d_primitive_type wined3d_primitive_type_from_d3d(D3DPRIMITIVETYPE type) +{ + return (enum wined3d_primitive_type)type; +} + /* Handle table functions */ static DWORD d3d8_allocate_handle(struct d3d8_handle_table *t, void *object, enum d3d8_handle_type type) { @@ -2457,7 +2462,7 @@ static HRESULT WINAPI d3d8_device_DrawPrimitive(IDirect3DDevice8 *iface, vertex_count = vertex_count_from_primitive_count(primitive_type, primitive_count); wined3d_mutex_lock(); d3d8_device_upload_sysmem_vertex_buffers(device, start_vertex, vertex_count); - wined3d_device_set_primitive_type(device->wined3d_device, primitive_type, 0); + wined3d_device_set_primitive_type(device->wined3d_device, wined3d_primitive_type_from_d3d(primitive_type), 0); wined3d_device_apply_stateblock(device->wined3d_device, device->state); hr = wined3d_device_draw_primitive(device->wined3d_device, start_vertex, vertex_count); wined3d_mutex_unlock(); @@ -2482,7 +2487,7 @@ static HRESULT WINAPI d3d8_device_DrawIndexedPrimitive(IDirect3DDevice8 *iface, base_vertex_index = device->stateblock_state->base_vertex_index; d3d8_device_upload_sysmem_vertex_buffers(device, base_vertex_index + min_vertex_idx, vertex_count); d3d8_device_upload_sysmem_index_buffer(device, start_idx, index_count); - wined3d_device_set_primitive_type(device->wined3d_device, primitive_type, 0); + wined3d_device_set_primitive_type(device->wined3d_device, wined3d_primitive_type_from_d3d(primitive_type), 0); wined3d_device_apply_stateblock(device->wined3d_device, device->state); hr = wined3d_device_draw_indexed_primitive(device->wined3d_device, start_idx, index_count); wined3d_mutex_unlock(); @@ -2576,7 +2581,7 @@ static HRESULT WINAPI d3d8_device_DrawPrimitiveUP(IDirect3DDevice8 *iface, if (FAILED(hr)) goto done; - wined3d_device_set_primitive_type(device->wined3d_device, primitive_type, 0); + wined3d_device_set_primitive_type(device->wined3d_device, wined3d_primitive_type_from_d3d(primitive_type), 0); wined3d_device_apply_stateblock(device->wined3d_device, device->state); hr = wined3d_device_draw_primitive(device->wined3d_device, vb_pos / stride, vtx_count); wined3d_stateblock_set_stream_source(device->state, 0, NULL, 0, 0); @@ -2704,7 +2709,7 @@ static HRESULT WINAPI d3d8_device_DrawIndexedPrimitiveUP(IDirect3DDevice8 *iface wined3dformat_from_d3dformat(index_format)); wined3d_stateblock_set_base_vertex_index(device->state, vb_pos / vertex_stride - min_vertex_idx); - wined3d_device_set_primitive_type(device->wined3d_device, primitive_type, 0); + wined3d_device_set_primitive_type(device->wined3d_device, wined3d_primitive_type_from_d3d(primitive_type), 0); wined3d_device_apply_stateblock(device->wined3d_device, device->state); hr = wined3d_device_draw_indexed_primitive(device->wined3d_device, ib_pos / idx_fmt_size, idx_count); -- 2.20.1

1 0

[PATCH 09/10] d3d8: Introduce a helper to convert d3d8 render states to wined3d states.
by Henri Verbeet March 31, 2020

March 31, 2020

From: Chip Davis <cdavis(a)codeweavers.com> Signed-off-by: Chip Davis <cdavis(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- dlls/d3d8/device.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/dlls/d3d8/device.c b/dlls/d3d8/device.c index 058937d3cc4..e094fef002c 100644 --- a/dlls/d3d8/device.c +++ b/dlls/d3d8/device.c @@ -442,6 +442,13 @@ static enum wined3d_transform_state wined3d_transform_state_from_d3d(D3DTRANSFOR return (enum wined3d_transform_state)state; } +static enum wined3d_render_state wined3d_render_state_from_d3d(D3DRENDERSTATETYPE state) +{ + if (state == D3DRS_ZBIAS) + return WINED3D_RS_DEPTHBIAS; + return (enum wined3d_render_state)state; +} + /* Handle table functions */ static DWORD d3d8_allocate_handle(struct d3d8_handle_table *t, void *object, enum d3d8_handle_type type) { @@ -1888,9 +1895,7 @@ static HRESULT WINAPI d3d8_device_SetRenderState(IDirect3DDevice8 *iface, TRACE("iface %p, state %#x, value %#x.\n", iface, state, value); wined3d_mutex_lock(); - if (state == D3DRS_ZBIAS) - state = WINED3D_RS_DEPTHBIAS; - wined3d_stateblock_set_render_state(device->update_state, state, value); + wined3d_stateblock_set_render_state(device->update_state, wined3d_render_state_from_d3d(state), value); if (state == D3DRS_POINTSIZE && value == D3D8_RESZ_CODE) resolve_depth_buffer(device); wined3d_mutex_unlock(); -- 2.20.1

1 0

[PATCH 08/10] d3d8: Introduce a helper to convert d3d8 transform states to wined3d states.
by Henri Verbeet March 31, 2020

March 31, 2020

From: Chip Davis <cdavis(a)codeweavers.com> Signed-off-by: Chip Davis <cdavis(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- dlls/d3d8/device.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/dlls/d3d8/device.c b/dlls/d3d8/device.c index 0df0f61930e..058937d3cc4 100644 --- a/dlls/d3d8/device.c +++ b/dlls/d3d8/device.c @@ -437,6 +437,11 @@ void d3dcaps_from_wined3dcaps(D3DCAPS8 *caps, const struct wined3d_caps *wined3d caps->MaxVertexShaderConst = min(D3D8_MAX_VERTEX_SHADER_CONSTANTF, caps->MaxVertexShaderConst); } +static enum wined3d_transform_state wined3d_transform_state_from_d3d(D3DTRANSFORMSTATETYPE state) +{ + return (enum wined3d_transform_state)state; +} + /* Handle table functions */ static DWORD d3d8_allocate_handle(struct d3d8_handle_table *t, void *object, enum d3d8_handle_type type) { @@ -1627,7 +1632,8 @@ static HRESULT WINAPI d3d8_device_SetTransform(IDirect3DDevice8 *iface, /* Note: D3DMATRIX is compatible with struct wined3d_matrix. */ wined3d_mutex_lock(); - wined3d_stateblock_set_transform(device->update_state, state, (const struct wined3d_matrix *)matrix); + wined3d_stateblock_set_transform(device->update_state, + wined3d_transform_state_from_d3d(state), (const struct wined3d_matrix *)matrix); wined3d_mutex_unlock(); return D3D_OK; @@ -1657,7 +1663,8 @@ static HRESULT WINAPI d3d8_device_MultiplyTransform(IDirect3DDevice8 *iface, /* Note: D3DMATRIX is compatible with struct wined3d_matrix. */ wined3d_mutex_lock(); - wined3d_stateblock_multiply_transform(device->state, state, (const struct wined3d_matrix *)matrix); + wined3d_stateblock_multiply_transform(device->state, + wined3d_transform_state_from_d3d(state), (const struct wined3d_matrix *)matrix); wined3d_mutex_unlock(); return D3D_OK; -- 2.20.1

1 0

[PATCH 07/10] d3d8: Introduce a helper to convert d3d8 device types to wined3d types.
by Henri Verbeet March 31, 2020

March 31, 2020

From: Chip Davis <cdavis(a)codeweavers.com> Signed-off-by: Chip Davis <cdavis(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- dlls/d3d8/d3d8_private.h | 5 +++++ dlls/d3d8/device.c | 4 ++-- dlls/d3d8/directx.c | 14 +++++++------- 3 files changed, 14 insertions(+), 9 deletions(-) diff --git a/dlls/d3d8/d3d8_private.h b/dlls/d3d8/d3d8_private.h index 7e772c2b99b..04bca7ddfa0 100644 --- a/dlls/d3d8/d3d8_private.h +++ b/dlls/d3d8/d3d8_private.h @@ -374,4 +374,9 @@ static inline D3DMULTISAMPLE_TYPE d3dmultisample_type_from_wined3d(enum wined3d_ return (D3DMULTISAMPLE_TYPE)type; } +static inline enum wined3d_device_type wined3d_device_type_from_d3d(D3DDEVTYPE type) +{ + return (enum wined3d_device_type)type; +} + #endif /* __WINE_D3DX8_PRIVATE_H */ diff --git a/dlls/d3d8/device.c b/dlls/d3d8/device.c index 08076228e2a..0df0f61930e 100644 --- a/dlls/d3d8/device.c +++ b/dlls/d3d8/device.c @@ -3700,7 +3700,7 @@ HRESULT device_init(struct d3d8_device *device, struct d3d8 *parent, struct wine wined3d_mutex_lock(); wined3d_adapter = wined3d_output_get_adapter(parent->wined3d_outputs[output_idx]); - if (FAILED(hr = wined3d_device_create(wined3d, wined3d_adapter, device_type, + if (FAILED(hr = wined3d_device_create(wined3d, wined3d_adapter, wined3d_device_type_from_d3d(device_type), focus_window, flags, 4, feature_levels, ARRAY_SIZE(feature_levels), &device->device_parent, &device->wined3d_device))) { @@ -3710,7 +3710,7 @@ HRESULT device_init(struct d3d8_device *device, struct d3d8 *parent, struct wine return hr; } - wined3d_get_device_caps(wined3d_adapter, device_type, &caps); + wined3d_get_device_caps(wined3d_adapter, wined3d_device_type_from_d3d(device_type), &caps); device->max_user_clip_planes = caps.MaxUserClipPlanes; device->vs_uniform_count = caps.MaxVertexShaderConst; diff --git a/dlls/d3d8/directx.c b/dlls/d3d8/directx.c index 874f9ea047b..0c0f2ecaadc 100644 --- a/dlls/d3d8/directx.c +++ b/dlls/d3d8/directx.c @@ -232,8 +232,8 @@ static HRESULT WINAPI d3d8_CheckDeviceType(IDirect3D8 *iface, UINT adapter, D3DD return WINED3DERR_NOTAVAILABLE; wined3d_mutex_lock(); - hr = wined3d_check_device_type(d3d8->wined3d, d3d8->wined3d_outputs[output_idx], device_type, - wined3dformat_from_d3dformat(display_format), + hr = wined3d_check_device_type(d3d8->wined3d, d3d8->wined3d_outputs[output_idx], + wined3d_device_type_from_d3d(device_type), wined3dformat_from_d3dformat(display_format), wined3dformat_from_d3dformat(backbuffer_format), windowed); wined3d_mutex_unlock(); @@ -298,13 +298,13 @@ static HRESULT WINAPI d3d8_CheckDeviceFormat(IDirect3D8 *iface, UINT adapter, D3 { DWORD levels; - hr = wined3d_check_device_multisample_type(wined3d_adapter, device_type, + hr = wined3d_check_device_multisample_type(wined3d_adapter, wined3d_device_type_from_d3d(device_type), WINED3DFMT_D24_UNORM_S8_UINT, FALSE, WINED3D_MULTISAMPLE_NON_MASKABLE, &levels); if (SUCCEEDED(hr) && !levels) hr = D3DERR_NOTAVAILABLE; } else - hr = wined3d_check_device_format(d3d8->wined3d, wined3d_adapter, device_type, + hr = wined3d_check_device_format(d3d8->wined3d, wined3d_adapter, wined3d_device_type_from_d3d(device_type), wined3dformat_from_d3dformat(adapter_format), usage, bind_flags, wined3d_rtype, wined3dformat_from_d3dformat(format)); wined3d_mutex_unlock(); @@ -332,7 +332,7 @@ static HRESULT WINAPI d3d8_CheckDeviceMultiSampleType(IDirect3D8 *iface, UINT ad wined3d_mutex_lock(); wined3d_adapter = wined3d_output_get_adapter(d3d8->wined3d_outputs[output_idx]); - hr = wined3d_check_device_multisample_type(wined3d_adapter, device_type, + hr = wined3d_check_device_multisample_type(wined3d_adapter, wined3d_device_type_from_d3d(device_type), wined3dformat_from_d3dformat(format), windowed, (enum wined3d_multisample_type)multisample_type, NULL); wined3d_mutex_unlock(); @@ -357,7 +357,7 @@ static HRESULT WINAPI d3d8_CheckDepthStencilMatch(IDirect3D8 *iface, UINT adapte wined3d_mutex_lock(); wined3d_adapter = wined3d_output_get_adapter(d3d8->wined3d_outputs[output_idx]); - hr = wined3d_check_depth_stencil_match(wined3d_adapter, device_type, + hr = wined3d_check_depth_stencil_match(wined3d_adapter, wined3d_device_type_from_d3d(device_type), wined3dformat_from_d3dformat(adapter_format), wined3dformat_from_d3dformat(rt_format), wined3dformat_from_d3dformat(ds_format)); wined3d_mutex_unlock(); @@ -384,7 +384,7 @@ static HRESULT WINAPI d3d8_GetDeviceCaps(IDirect3D8 *iface, UINT adapter, D3DDEV wined3d_mutex_lock(); wined3d_adapter = wined3d_output_get_adapter(d3d8->wined3d_outputs[output_idx]); - hr = wined3d_get_device_caps(wined3d_adapter, device_type, &wined3d_caps); + hr = wined3d_get_device_caps(wined3d_adapter, wined3d_device_type_from_d3d(device_type), &wined3d_caps); wined3d_mutex_unlock(); d3dcaps_from_wined3dcaps(caps, &wined3d_caps, adapter); -- 2.20.1

1 0

[PATCH 06/10] d3d8: Introduce helpers to convert between d3d8 and wined3d multisample types.
by Henri Verbeet March 31, 2020

March 31, 2020

From: Chip Davis <cdavis(a)codeweavers.com> Signed-off-by: Chip Davis <cdavis(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- dlls/d3d8/d3d8_private.h | 5 +++++ dlls/d3d8/device.c | 14 ++++++++++---- dlls/d3d8/surface.c | 2 +- dlls/d3d8/texture.c | 4 ++-- 4 files changed, 18 insertions(+), 7 deletions(-) diff --git a/dlls/d3d8/d3d8_private.h b/dlls/d3d8/d3d8_private.h index 93526411767..7e772c2b99b 100644 --- a/dlls/d3d8/d3d8_private.h +++ b/dlls/d3d8/d3d8_private.h @@ -369,4 +369,9 @@ static inline unsigned int wined3d_bind_flags_from_d3d8_usage(DWORD usage) return bind_flags; } +static inline D3DMULTISAMPLE_TYPE d3dmultisample_type_from_wined3d(enum wined3d_multisample_type type) +{ + return (D3DMULTISAMPLE_TYPE)type; +} + #endif /* __WINE_D3DX8_PRIVATE_H */ diff --git a/dlls/d3d8/device.c b/dlls/d3d8/device.c index 23e93df0616..08076228e2a 100644 --- a/dlls/d3d8/device.c +++ b/dlls/d3d8/device.c @@ -204,7 +204,7 @@ static void present_parameters_from_wined3d_swapchain_desc(D3DPRESENT_PARAMETERS present_parameters->BackBufferHeight = swapchain_desc->backbuffer_height; present_parameters->BackBufferFormat = d3dformat_from_wined3dformat(swapchain_desc->backbuffer_format); present_parameters->BackBufferCount = swapchain_desc->backbuffer_count; - present_parameters->MultiSampleType = swapchain_desc->multisample_type; + present_parameters->MultiSampleType = d3dmultisample_type_from_wined3d(swapchain_desc->multisample_type); present_parameters->SwapEffect = d3dswapeffect_from_wined3dswapeffect(swapchain_desc->swap_effect); present_parameters->hDeviceWindow = swapchain_desc->device_window; present_parameters->Windowed = swapchain_desc->windowed; @@ -255,6 +255,11 @@ static enum wined3d_swap_interval wined3dswapinterval_from_d3d(DWORD interval) } } +static enum wined3d_multisample_type wined3d_multisample_type_from_d3d(D3DMULTISAMPLE_TYPE type) +{ + return (enum wined3d_multisample_type)type; +} + static BOOL wined3d_swapchain_desc_from_present_parameters(struct wined3d_swapchain_desc *swapchain_desc, const D3DPRESENT_PARAMETERS *present_parameters) { @@ -291,7 +296,7 @@ static BOOL wined3d_swapchain_desc_from_present_parameters(struct wined3d_swapch swapchain_desc->backbuffer_format = wined3dformat_from_d3dformat(present_parameters->BackBufferFormat); swapchain_desc->backbuffer_count = max(1, present_parameters->BackBufferCount); swapchain_desc->backbuffer_bind_flags = WINED3D_BIND_RENDER_TARGET; - swapchain_desc->multisample_type = present_parameters->MultiSampleType; + swapchain_desc->multisample_type = wined3d_multisample_type_from_d3d(present_parameters->MultiSampleType); swapchain_desc->multisample_quality = 0; /* d3d9 only */ swapchain_desc->swap_effect = wined3dswapeffect_from_d3dswapeffect(present_parameters->SwapEffect); swapchain_desc->device_window = present_parameters->hDeviceWindow; @@ -1241,7 +1246,8 @@ static HRESULT WINAPI d3d8_device_CreateRenderTarget(IDirect3DDevice8 *iface, UI access |= WINED3D_RESOURCE_ACCESS_MAP_R | WINED3D_RESOURCE_ACCESS_MAP_W; return d3d8_device_create_surface(device, wined3dformat_from_d3dformat(format), - multisample_type, WINED3D_BIND_RENDER_TARGET, access, width, height, surface); + wined3d_multisample_type_from_d3d(multisample_type), + WINED3D_BIND_RENDER_TARGET, access, width, height, surface); } static HRESULT WINAPI d3d8_device_CreateDepthStencilSurface(IDirect3DDevice8 *iface, @@ -1259,7 +1265,7 @@ static HRESULT WINAPI d3d8_device_CreateDepthStencilSurface(IDirect3DDevice8 *if *surface = NULL; return d3d8_device_create_surface(device, wined3dformat_from_d3dformat(format), - multisample_type, WINED3D_BIND_DEPTH_STENCIL, + wined3d_multisample_type_from_d3d(multisample_type), WINED3D_BIND_DEPTH_STENCIL, WINED3D_RESOURCE_ACCESS_GPU, width, height, surface); } diff --git a/dlls/d3d8/surface.c b/dlls/d3d8/surface.c index bbd7e38338b..c3d28efba20 100644 --- a/dlls/d3d8/surface.c +++ b/dlls/d3d8/surface.c @@ -193,7 +193,7 @@ static HRESULT WINAPI d3d8_surface_GetDesc(IDirect3DSurface8 *iface, D3DSURFACE_ desc->Usage = d3dusage_from_wined3dusage(wined3d_desc.usage, wined3d_desc.bind_flags); desc->Pool = d3dpool_from_wined3daccess(wined3d_desc.access, wined3d_desc.usage); desc->Size = wined3d_desc.size; - desc->MultiSampleType = wined3d_desc.multisample_type; + desc->MultiSampleType = d3dmultisample_type_from_wined3d(wined3d_desc.multisample_type); desc->Width = wined3d_desc.width; desc->Height = wined3d_desc.height; diff --git a/dlls/d3d8/texture.c b/dlls/d3d8/texture.c index c82a75d87a4..f383b374bde 100644 --- a/dlls/d3d8/texture.c +++ b/dlls/d3d8/texture.c @@ -255,7 +255,7 @@ static HRESULT WINAPI d3d8_texture_2d_GetLevelDesc(IDirect3DTexture8 *iface, UIN desc->Usage = d3dusage_from_wined3dusage(wined3d_desc.usage, wined3d_desc.bind_flags); desc->Pool = d3dpool_from_wined3daccess(wined3d_desc.access, wined3d_desc.usage); desc->Size = wined3d_desc.size; - desc->MultiSampleType = wined3d_desc.multisample_type; + desc->MultiSampleType = d3dmultisample_type_from_wined3d(wined3d_desc.multisample_type); desc->Width = wined3d_desc.width; desc->Height = wined3d_desc.height; } @@ -602,7 +602,7 @@ static HRESULT WINAPI d3d8_texture_cube_GetLevelDesc(IDirect3DCubeTexture8 *ifac desc->Usage = d3dusage_from_wined3dusage(wined3d_desc.usage, wined3d_desc.bind_flags); desc->Pool = d3dpool_from_wined3daccess(wined3d_desc.access, wined3d_desc.usage); desc->Size = wined3d_desc.size; - desc->MultiSampleType = wined3d_desc.multisample_type; + desc->MultiSampleType = d3dmultisample_type_from_wined3d(wined3d_desc.multisample_type); desc->Width = wined3d_desc.width; desc->Height = wined3d_desc.height; } -- 2.20.1

1 0