March 2021 - Wine-Devel - list.winehq.org

[PATCH 4/5] ntdll: Use syscall frame for FPU and XMM contexts in NtGetContextThread.
by Jacek Caban March 1, 2021

March 1, 2021

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/ntdll/unix/signal_i386.c | 38 +++++++++++++++++------------------ 1 file changed, 19 insertions(+), 19 deletions(-)

1 0

[PATCH 3/5] ntdll: Store FPU and XMM contexts in x86 syscall frame.
by Jacek Caban March 1, 2021

March 1, 2021

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/ntdll/unix/signal_arm.c | 1 + dlls/ntdll/unix/signal_i386.c | 23 ++++++++++++++++++++++- dlls/ntdll/unix/virtual.c | 1 - tools/winebuild/import.c | 28 +++++++++++++++++++++++++++- 4 files changed, 50 insertions(+), 3 deletions(-)

1 0

[PATCH 2/5] ntdll: Use syscall frame in x86 call_raise_user_exception_dispatcher implementation.
by Jacek Caban March 1, 2021

March 1, 2021

Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- dlls/ntdll/unix/signal_i386.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-)

1 0

[PATCH 1/5] ntdll: Restore all non-volatile i386 registers in syscall dispatcher.
by Jacek Caban March 1, 2021

March 1, 2021

Based on set_full_cpu_context. Signed-off-by: Jacek Caban <jacek(a)codeweavers.com> --- tools/winebuild/import.c | 63 +++++++++++++++++++++++++++++++--------- 1 file changed, 49 insertions(+), 14 deletions(-)

1 0

[website] German translation for release 6.3
by Julian Rüger March 1, 2021

March 1, 2021

Signed-off-by: Julian Rüger <jr98(a)gmx.net>

1 0

[website] German translation for release 6.2
by Julian Rüger March 1, 2021

March 1, 2021

Signed-off-by: Julian Rüger <jr98(a)gmx.net>

1 0

[website] German translation for release 6.1
by Julian Rüger March 1, 2021

March 1, 2021

Signed-off-by: Julian Rüger <jr98(a)gmx.net>

1 0

[tools] testbot/LibvirtTool: Allow cleanly powering off VMs.
by Francois Gouget March 1, 2021

March 1, 2021

If a snapshot has the '-off' suffix, try cleanly powering of the VM after running the tests. This may avoid perma-crashing the GPU when using PCI-passthrough. Forcefully power of the VM as usual if it does not cleanly shuts down within $WaitForShutdown seconds. Signed-off-by: Francois Gouget <fgouget(a)codeweavers.com> --- testbot/bin/LibvirtTool.pl | 50 +++++++++++++++++++++++++++++-- testbot/lib/WineTestBot/Config.pm | 9 ++++-- 2 files changed, 54 insertions(+), 5 deletions(-) diff --git a/testbot/bin/LibvirtTool.pl b/testbot/bin/LibvirtTool.pl index a2939e738..59adf2f7f 100755 --- a/testbot/bin/LibvirtTool.pl +++ b/testbot/bin/LibvirtTool.pl @@ -323,9 +323,55 @@ sub Monitor() sub PowerOff() { - # Power off VMs no matter what their initial status is + my $Domain = $VM->GetDomain(); + if ($VM->IdleSnapshot =~ /-off$/ and $Domain->IsPoweredOn()) + { + # Attempt to perform a clean shutdown. + # Use SetTime() to detect if privileged operations are allowed. + my $TA = $VM->GetAgent(); + if (!$TA->SetTime()) + { + # Not a fatal error. Try the next port in case the VM runs a privileged + # TestAgentd daemon there. + $TA->Disconnect(); + $TA = $VM->GetAgent(1); + if (!$TA->SetTime()) + { + Error "Unable to get a privileged TestAgent: ". $TA->GetLastError() ."\n"; + $TA->Disconnect(); + $TA = undef; + } + } + if ($TA) + { + my $Cmd = $VM->Type =~ /^win(?:32|64)$/ ? + ["shutdown.exe", "/p", "/d", "00:00"] : + ["/sbin/shutdown", "--poweroff", "now"]; + Debug(Elapsed($Start), " Running @$Cmd\n"); + if (!$TA->Run($Cmd, 0)) + { + Error "Could not run @$Cmd: ". $TA->GetLastError() ."\n"; + } + else + { + Debug(Elapsed($Start), " Waiting for the VM to power off\n"); + my $Deadline = time() + $WaitForShutdown; + while ($Domain->IsPoweredOn()) + { + if (time() >= $Deadline) + { + Error "Timed out waiting for ". $VM->Name ." to perform a clean shutdown. Forcefully shutting down now...\n"; + last; + } + sleep(1); + } + } + } + } + + # Power off the VM no matter what its initial status is $CurrentStatus = $VM->Status; - my $ErrMessage = $VM->GetDomain()->PowerOff(); + my $ErrMessage = $Domain->PowerOff(); FatalError("$ErrMessage\n") if (defined $ErrMessage); return ChangeStatus(undef, "off", "done"); diff --git a/testbot/lib/WineTestBot/Config.pm b/testbot/lib/WineTestBot/Config.pm index 312797229..a4aba2c55 100644 --- a/testbot/lib/WineTestBot/Config.pm +++ b/testbot/lib/WineTestBot/Config.pm @@ -29,7 +29,8 @@ use vars qw (@ISA @EXPORT @EXPORT_OK $UseSSL $LogDir $DataDir $BinDir %RepoURLs $DbDataSource $DbUsername $DbPassword $MaxRevertingVMs $MaxRevertsWhileRunningVMs $MaxActiveVMs $MaxRunningVMs $MaxVMsWhenIdle $WaitForBoot $SleepAfterBoot $SleepAfterRevert - $VMToolTimeout $MaxVMErrors $MaxTaskTries $AdminEMail $RobotEMail + $VMToolTimeout $WaitForShutdown $MaxVMErrors $MaxTaskTries + $AdminEMail $RobotEMail $WinePatchToOverride $WinePatchCc $ReconfigBuildTimeout $ExeBuildTimeout $ExeModuleTimeout $WineBuildTimeout $WineModuleTimeout $TimeoutMargin @@ -45,8 +46,8 @@ require Exporter; @EXPORT = qw($UseSSL $LogDir $DataDir $BinDir %RepoURLs $MaxRevertingVMs $MaxRevertsWhileRunningVMs $MaxActiveVMs $MaxRunningVMs $MaxVMsWhenIdle $WaitForBoot $SleepAfterBoot - $SleepAfterRevert - $VMToolTimeout $MaxVMErrors $MaxTaskTries $AdminEMail + $SleepAfterRevert $VMToolTimeout $WaitForShutdown + $MaxVMErrors $MaxTaskTries $AdminEMail $RobotEMail $WinePatchToOverride $WinePatchCc $SuiteTimeout $ReconfigBuildTimeout $ExeBuildTimeout $ExeModuleTimeout $WineBuildTimeout $WineModuleTimeout $TimeoutMargin @@ -101,6 +102,8 @@ $SleepAfterRevert = 0; # How long to wait before considering a VM operation is stuck. In particular # for reverts this should take into account the time it may need to boot. $VMToolTimeout = 6 * 60; +# How long to wait for the VM to perform a clean shutdown. +$WaitForShutdown = 30; # Notify the administrator that a VM probably needs manual fixing after # $MaxVMErrors consecutive revert errors. -- 2.20.1

1 0

[tools] testbot/TestWTBS: Fix the TestFailures checks for pure wine:build tasks.
by Francois Gouget March 1, 2021

March 1, 2021

Such tasks will obviously not have any failure from the test units so take that into account. Signed-off-by: Francois Gouget <fgouget(a)codeweavers.com> --- testbot/tests/TestWTBS | 74 +++++++++++++++++++++++++++--------------- 1 file changed, 48 insertions(+), 26 deletions(-) diff --git a/testbot/tests/TestWTBS b/testbot/tests/TestWTBS index 1467c4b4e..edf097de2 100755 --- a/testbot/tests/TestWTBS +++ b/testbot/tests/TestWTBS @@ -859,18 +859,6 @@ sub CheckTask($$$$) { my ($Task, $TaskType, $TestInfo, $TestUnits) = @_; - my $TaskInfo = $TestInfo->{$TaskType}; - if (CheckValue($TaskInfo->{Status})) - { - is($Task->Status, $TaskInfo->{Status}, "Check Status of task ". TaskKeyStr($Task)); - } - if ($Task->Status =~ /^bad/) - { - # It makes no sense to check which test units were run in case of a build - # error. - $TestUnits->{$TaskType}->{"*skipped*"} = 1; - } - # Assume the VM's Missions field has not changed since the tests were run my ($ErrMessage, $Missions) = ParseMissionStatement($Task->Missions); if (@$Missions != 1) @@ -879,22 +867,42 @@ sub CheckTask($$$$) return; } - my %ReportTypes; + my (%ReportTypes, $IsTestTask); if ($TaskType =~ /^win/) { + $IsTestTask = 1 if ($TaskType =~ /^win(?:32|64)$/); foreach my $Mission (@{$Missions->[0]->{Missions}}) { my $ReportName = GetMissionBaseName($Mission) .".report"; my $MissionType = $TaskType; - $MissionType .= ":". ($Mission->{test} || "test") if ($TaskType eq "wine"); + if ($TaskType eq "wine") + { + my $Test = $Mission->{test} || "test"; + $IsTestTask = 1 if ($Test =~ /^(?:test|module)/); + $MissionType .= ":$Test"; + } $ReportTypes{$ReportName} = $MissionType; } } + my $TestType = ($TaskType eq "wine" and !$IsTestTask) ? + "wine:build" : $TaskType; + my $TaskInfo = $TestInfo->{$TestType}; + + if (CheckValue($TaskInfo->{Status})) + { + is($Task->Status, $TaskInfo->{Status}, "Check Status of task ". TaskKeyStr($Task)); + } + if ($Task->Status =~ /^bad/) + { + # It makes no sense to check which test units were run in case of a build + # error. + $TestUnits->{$TaskType}->{"*skipped*"} = 1; + } my $CheckTimeouts = ($Task->Status eq "completed" and CheckValue($TaskInfo->{HasTimeout})); - my $ExpectedFailures; + my ($ReportFailures, $IgnoreFailures); my ($ReportCount, $TimeoutCount, $NewFailures) = (0, 0, 0); foreach my $LogName (@{GetLogFileNames($Task->GetDir())}) { @@ -903,7 +911,7 @@ sub CheckTask($$$$) $NewFailures += $LogInfo->{NewCount} || 0; # Get the mission-specific "wine:xxx" report directives - my $MissionType = $ReportTypes{$LogName} || $TaskType; + my $MissionType = $ReportTypes{$LogName} || $TestType; my $MissionInfo = $TestInfo->{$MissionType}; my $LogType = "log"; if ($LogName =~ /\.report$/) @@ -924,11 +932,11 @@ sub CheckTask($$$$) ok(($LogInfo->{ErrCount} || 0) <= $MissionInfo->{TestFailures}, "Check Failures of $LogName in task ". TaskKeyStr($Task)) or diag("report error count = ", ($LogInfo->{ErrCount} || 0), ", expected at most $MissionInfo->{TestFailures}"); - $ExpectedFailures += $MissionInfo->{TestFailures}; + $ReportFailures += $MissionInfo->{TestFailures}; } else { - $ExpectedFailures = undef; + $IgnoreFailures = 1; } } elsif ($LogName =~ /^testbot\./) @@ -951,20 +959,34 @@ sub CheckTask($$$$) } if ($Task->Status eq "completed") { - if (defined $ExpectedFailures) + if ($IsTestTask and ($ReportCount or CheckValue($TaskInfo->{TestUnits}))) + { + if ($IgnoreFailures) + { + # For some mission types (typically test=module) the failure count + # is unpredictable and cannot be checked. + ; # Nothing to do + } + elsif ($ReportCount) + { + # The task's failure count must be compared to the sum of the failure + # counts of each test report. + is($Task->TestFailures, $ReportFailures, "Check Failures of task ". TaskKeyStr($Task)); + } + elsif (CheckValue($TaskInfo->{TestFailures})) + { + # There is no report if the VM crashed / rebooted + is($Task->TestFailures, $TaskInfo->{TestFailures}, "Check Failures of task ". TaskKeyStr($Task)); + } + } + elsif (!$IsTestTask and $ReportCount) { - is($Task->TestFailures, $ExpectedFailures, "Check Failures of task ". TaskKeyStr($Task)); + fail("A $TestType task should not have $ReportCount test reports"); } elsif (CheckValue($TaskInfo->{TestFailures}) and !$ReportCount) { - # Scale the expected TestFailures count with the number of times the test - # was run, i.e. $ReportCount, or take it as is if no report is available. is($Task->TestFailures, $TaskInfo->{TestFailures}, "Check Failures of task ". TaskKeyStr($Task)); } - # else there are reports for which we cannot check the TestFailures count. - # In particular this can happen if the test failure count can be checked - # for test=test but not for test=module. Then whether TestFailures can be - # checked or not depends on the missions mix. } return $NewFailures; } -- 2.20.1

1 0

[tools] testbot/TestWTBS: Adjust the TestUnits check to the wine test/module missions.
by Francois Gouget March 1, 2021

March 1, 2021

Don't complain that the test=test or test=module case is missing test units if there was no mission of that type. Signed-off-by: Francois Gouget <fgouget(a)codeweavers.com> --- testbot/tests/TestWTBS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/testbot/tests/TestWTBS b/testbot/tests/TestWTBS index edf097de2..04487c4bc 100755 --- a/testbot/tests/TestWTBS +++ b/testbot/tests/TestWTBS @@ -882,6 +882,7 @@ sub CheckTask($$$$) $MissionType .= ":$Test"; } $ReportTypes{$ReportName} = $MissionType; + $TestUnits->{$MissionType} ||= {}; } } my $TestType = ($TaskType eq "wine" and !$IsTestTask) ? @@ -1191,6 +1192,9 @@ sub CheckJobTree($;$) my @MissionTypes = $Type eq "wine" ? ("wine:test", "wine:module") : ($Type); foreach my $MissionType (@MissionTypes) { + # Skip if there was no task running this type of mission + next if (!$TestUnits->{$MissionType}); + my $MissionInfo = $TestInfo->{$MissionType}; next if (!CheckValue($MissionInfo->{TestUnits})); -- 2.20.1

1 0