[tools] testbot/TestWTBS: Fix the TestFailures checks for pure wine:build tasks.

[Francois Gouget]

Such tasks will obviously not have any failure from the test units so
take that into account.

Signed-off-by: Francois Gouget <fgouget(a)codeweavers.com>
---
 testbot/tests/TestWTBS | 74 +++++++++++++++++++++++++++---------------
 1 file changed, 48 insertions(+), 26 deletions(-)

diff --git a/testbot/tests/TestWTBS b/testbot/tests/TestWTBS
index 1467c4b4e..edf097de2 100755
--- a/testbot/tests/TestWTBS
+++ b/testbot/tests/TestWTBS
@@ -859,18 +859,6 @@ sub CheckTask($$$$)
 {
   my ($Task, $TaskType, $TestInfo, $TestUnits) = @_;
 
-  my $TaskInfo = $TestInfo->{$TaskType};
-  if (CheckValue($TaskInfo->{Status}))
-  {
-    is($Task->Status, $TaskInfo->{Status}, "Check Status of task ". TaskKeyStr($Task));
-  }
-  if ($Task->Status =~ /^bad/)
-  {
-    # It makes no sense to check which test units were run in case of a build
-    # error.
-    $TestUnits->{$TaskType}->{"*skipped*"} = 1;
-  }
-
   # Assume the VM's Missions field has not changed since the tests were run
   my ($ErrMessage, $Missions) = ParseMissionStatement($Task->Missions);
   if (@$Missions != 1)
@@ -879,22 +867,42 @@ sub CheckTask($$$$)
     return;
   }
 
-  my %ReportTypes;
+  my (%ReportTypes, $IsTestTask);
   if ($TaskType =~ /^win/)
   {
+    $IsTestTask = 1 if ($TaskType =~ /^win(?:32|64)$/);
     foreach my $Mission (@{$Missions->[0]->{Missions}})
     {
       my $ReportName = GetMissionBaseName($Mission) .".report";
       my $MissionType = $TaskType;
-      $MissionType .= ":". ($Mission->{test} || "test") if ($TaskType eq "wine");
+      if ($TaskType eq "wine")
+      {
+        my $Test = $Mission->{test} || "test";
+        $IsTestTask = 1 if ($Test =~ /^(?:test|module)/);
+        $MissionType .= ":$Test";
+      }
       $ReportTypes{$ReportName} = $MissionType;
     }
   }
+  my $TestType = ($TaskType eq "wine" and !$IsTestTask) ?
+                 "wine:build" : $TaskType;
+  my $TaskInfo =  $TestInfo->{$TestType};
+
+  if (CheckValue($TaskInfo->{Status}))
+  {
+    is($Task->Status, $TaskInfo->{Status}, "Check Status of task ". TaskKeyStr($Task));
+  }
+  if ($Task->Status =~ /^bad/)
+  {
+    # It makes no sense to check which test units were run in case of a build
+    # error.
+    $TestUnits->{$TaskType}->{"*skipped*"} = 1;
+  }
 
   my $CheckTimeouts = ($Task->Status eq "completed" and
                        CheckValue($TaskInfo->{HasTimeout}));
 
-  my $ExpectedFailures;
+  my ($ReportFailures, $IgnoreFailures);
   my ($ReportCount, $TimeoutCount, $NewFailures) = (0, 0, 0);
   foreach my $LogName (@{GetLogFileNames($Task->GetDir())})
   {
@@ -903,7 +911,7 @@ sub CheckTask($$$$)
     $NewFailures += $LogInfo->{NewCount} || 0;
 
     # Get the mission-specific "wine:xxx" report directives
-    my $MissionType = $ReportTypes{$LogName} || $TaskType;
+    my $MissionType = $ReportTypes{$LogName} || $TestType;
     my $MissionInfo = $TestInfo->{$MissionType};
     my $LogType = "log";
     if ($LogName =~ /\.report$/)
@@ -924,11 +932,11 @@ sub CheckTask($$$$)
         ok(($LogInfo->{ErrCount} || 0) <= $MissionInfo->{TestFailures},
            "Check Failures of $LogName in task ". TaskKeyStr($Task))
             or diag("report error count = ", ($LogInfo->{ErrCount} || 0), ", expected at most $MissionInfo->{TestFailures}");
-        $ExpectedFailures += $MissionInfo->{TestFailures};
+        $ReportFailures += $MissionInfo->{TestFailures};
       }
       else
       {
-        $ExpectedFailures = undef;
+        $IgnoreFailures = 1;
       }
     }
     elsif ($LogName =~ /^testbot\./)
@@ -951,20 +959,34 @@ sub CheckTask($$$$)
   }
   if ($Task->Status eq "completed")
   {
-    if (defined $ExpectedFailures)
+    if ($IsTestTask and ($ReportCount or CheckValue($TaskInfo->{TestUnits})))
+    {
+      if ($IgnoreFailures)
+      {
+        # For some mission types (typically test=module) the failure count
+        # is unpredictable and cannot be checked.
+        ; # Nothing to do
+      }
+      elsif ($ReportCount)
+      {
+        # The task's failure count must be compared to the sum of the failure
+        # counts of each test report.
+        is($Task->TestFailures, $ReportFailures, "Check Failures of task ". TaskKeyStr($Task));
+      }
+      elsif (CheckValue($TaskInfo->{TestFailures}))
+      {
+        # There is no report if the VM crashed / rebooted
+        is($Task->TestFailures, $TaskInfo->{TestFailures}, "Check Failures of task ". TaskKeyStr($Task));
+      }
+    }
+    elsif (!$IsTestTask and $ReportCount)
     {
-      is($Task->TestFailures, $ExpectedFailures, "Check Failures of task ". TaskKeyStr($Task));
+      fail("A $TestType task should not have $ReportCount test reports");
     }
     elsif (CheckValue($TaskInfo->{TestFailures}) and !$ReportCount)
     {
-      # Scale the expected TestFailures count with the number of times the test
-      # was run, i.e. $ReportCount, or take it as is if no report is available.
       is($Task->TestFailures, $TaskInfo->{TestFailures}, "Check Failures of task ". TaskKeyStr($Task));
     }
-    # else there are reports for which we cannot check the TestFailures count.
-    # In particular this can happen if the test failure count can be checked
-    # for test=test but not for test=module. Then whether TestFailures can be
-    # checked or not depends on the missions mix.
   }
   return $NewFailures;
 }
-- 
2.20.1