Regression: Wine won't compile with latest cvs shlwapi
I can't get recent cvs versions to compile. After running cvs update -PAd and ./tools/installwine I get these messages gcc: Internal compiler error: program cc1 got fatal signal 11 make[2]: *** [ordinal.o] Error 1 make[2]: Leaving directory `/usr/local/src/wine/dlls/shlwapi' make[1]: *** [shlwapi/shlwapi.dll.so] Error 2 make[1]: Leaving directory `/usr/local/src/wine/dlls' make: *** [dlls] Error 2 Compilation failed, aborting install. At first I thought it might be something wrong with my system so I backed out cvs to March 1st 2002 and everything worked. I talked to Lawson on wine-users and he says I should look at http://www.bitwizard.nl/sig11/ (This link is about mostly about compiling a kernal but it applies to compiling wine as well) I have looked at it and tried most of the things suggested in it. I still stop in exactly the same place. Things i have tried I ran dd if=/dev/hda7 of=/dev/null bs=1024k count=96 and re-ran make I lowered my clock speed from 200mhz to 133mhz I have 4 72 pin simms, 2-16's and 2-32's I have tried compiling with each set individualy I have increased my swap space None of this helped. In the mean time I have done some regression testing using CVS cvs update -D "2002-03-19 19:31:04 CST" ./configure make depend && make compiles with no errors cvs update -D "2002-03-19 19:33:40 CST" ./configure make depend && make results with this gcc: Internal compiler error: program cc1 got fatal signal 11 make[2]: *** [ordinal.o] Error 1 make[2]: Leaving directory `/usr/local/src/wine/dlls/shlwapi' make[1]: *** [shlwapi/shlwapi.dll.so] Error 2 make[1]: Leaving directory `/usr/local/src/wine/dlls' make: *** [dlls] Error 2 Compilation failed, aborting install. This is the patch that was commited at 19:33:39 CST http://www.winehq.com/hypermail/wine-cvs/2002/03/0072.html Now I'm not the shapest knife in the drawer in fact I can be quite dull but this is a very strong indication that this patch is the one that is causing the problem. What do I need to do now? Tony Lambregts
On April 2, 2002 05:34 pm, Tony Lambregts wrote:
This is the patch that was commited at 19:33:39 CST http://www.winehq.com/hypermail/wine-cvs/2002/03/0072.html
Hey!!! wine-cvs archive is down! ;( -- Dimi.
No it's not. You just happened to catch it in the 5 seconds it took me to change a symlink. Good timing on your part I would say. :-D On Tue, 2002-04-02 at 16:57, Dimitrie O. Paun wrote:
On April 2, 2002 05:34 pm, Tony Lambregts wrote:
This is the patch that was commited at 19:33:39 CST http://www.winehq.com/hypermail/wine-cvs/2002/03/0072.html
Hey!!! wine-cvs archive is down! ;(
-- Dimi.
-- __ _WebGeek/NetAdmin CodeWeavers -= http://www.codeweavers.com | \| |_____ __ ___ __ __ _ _ _ -= http://www.dracowulf.com | .` / -_) | | / ' \/ _` | ' \ -= mailto:jnewman(a)codeweavers.com |_|\_\___|\_/\_/|_|_|_\__,_|_||_| -= ICQ: 1842980 Yahoo: laxdragon
Tony Lambregts wrote:
gcc: Internal compiler error: program cc1 got fatal signal 11
I talked to Lawson on wine-users and he says I should look at http://www.bitwizard.nl/sig11/ (This link is about mostly about compiling a kernal but it applies to compiling wine as well)
I have looked at it and tried most of the things suggested in it. I still stop in exactly the same place. [snip] What do I need to do now?
If you can get cc1 to die with SIGSEGV reproducibly in same place, then you have most probably found a compiler bug. The first question is of course, which version of gcc are you using? Did you build it yourself or is it the one that came with your distro (which one?)? What is the output of gcc -v rpm -qf `which gcc` Bye, Ulrich -- Dr. Ulrich Weigand weigand(a)informatik.uni-erlangen.de
Ulrich Weigand wrote:
Tony Lambregts wrote:
gcc: Internal compiler error: program cc1 got fatal signal 11
I talked to Lawson on wine-users and he says I should look at http://www.bitwizard.nl/sig11/ (This link is about mostly about compiling a kernal but it applies to compiling wine as well)
I have looked at it and tried most of the things suggested in it. I still stop in exactly the same place.
[snip]
What do I need to do now?
If you can get cc1 to die with SIGSEGV reproducibly in same place, then you have most probably found a compiler bug.
The first question is of course, which version of gcc are you using? Did you build it yourself or is it the one that came with your distro (which one?)? What is the output of gcc -v rpm -qf `which gcc`
Bye, Ulrich
Redhat 6.0 gcc -v Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/specs gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release) Tony Lambregts
Tony Lambregts <tony_lambregts(a)telusplanet.net> writes:
I can't get recent cvs versions to compile. After running cvs update -PAd and ./tools/installwine I get these messages gcc: Internal compiler error: program cc1 got fatal signal 11
make[2]: *** [ordinal.o] Error 1 make[2]: Leaving directory `/usr/local/src/wine/dlls/shlwapi' make[1]: *** [shlwapi/shlwapi.dll.so] Error 2 make[1]: Leaving directory `/usr/local/src/wine/dlls' make: *** [dlls] Error 2
That's most likely the usual gcc bug with local WINAPI function pointers. I've merged a patch to shlwapi that should work around this. -- Alexandre Julliard julliard(a)winehq.com
Alexandre Julliard wrote:
Tony Lambregts <tony_lambregts(a)telusplanet.net> writes:
I can't get recent cvs versions to compile. After running cvs update -PAd and ./tools/installwine I get these messages gcc: Internal compiler error: program cc1 got fatal signal 11
make[2]: *** [ordinal.o] Error 1 make[2]: Leaving directory `/usr/local/src/wine/dlls/shlwapi' make[1]: *** [shlwapi/shlwapi.dll.so] Error 2 make[1]: Leaving directory `/usr/local/src/wine/dlls' make: *** [dlls] Error 2
That's most likely the usual gcc bug with local WINAPI function pointers. I've merged a patch to shlwapi that should work around this.
Your right my version of gcc is buggy . Thankyou for the patch wine compiles fine now. Tony Lambregts
participants (5)
-
Alexandre Julliard -
Dimitrie O. Paun -
Jeremy Newman -
Tony Lambregts -
Ulrich Weigand