----- Original Message -----
Sent: Saturday, November 06, 2004 6:01
PM
Subject: SetupComm insize 1600 outsize
1600
Hi Wine Developers,
Question:
I need to use a Win app on Linux and everything
seams fine, except that the communication with the serialport doesn't work.
Well, also here, everything seams fine to me, so I want to get your advice.
The only thing I could see is the unimplemented stub for "SetupComm insize outsize". Can I set it by my
own (setserial) or what's the meaning of it anyway? The output below seams to
me pretty good...:
fixme:comm:SetupComm insize 1600 outsize 1600 unimplemented
stub
trace:comm:GetCommState handle 0x54, ptr
0x778ef948
trace:comm:GetCommState OK
trace:comm:GetCommState bytesize 8
baudrate 2400 fParity 0 Parity 0
stopbits 1
trace:comm:GetCommState
~IXON ~IXOFF
trace:comm:GetCommState fOutxCtsFlow 0 fRtsControl
1
trace:comm:GetCommState fOutxDsrFlow 0
fDtrControl1
trace:comm:GetCommState ~CRTSCTS
trace:comm:SetCommState
handle 0x54, ptr 0x778ef948
trace:comm:SetCommState bytesize 8 baudrate
1200 fParity 0 Parity 0
stopbits 1
trace:comm:SetCommState ~IXON
~IXOFF
trace:comm:SetCommState fOutxCtsFlow 0 fRtsControl
1
trace:comm:SetCommState fOutxDsrFlow 0
fDtrControl1
trace:comm:EscapeCommFunction handle 0x54,
function=5
trace:comm:EscapeCommFunction
SETDTR
trace:comm:EscapeCommFunction handle 0x54,
function=4
trace:comm:EscapeCommFunction
CLRRTS
trace:comm:SetCommTimeouts (0x54,0x778ef934)
trace:comm:PurgeComm
handle 0x54, flags 4
trace:comm:PurgeComm handle 0x54, flags 8
]# cat /proc/tty/driver/serial
serinfo:1.0
driver:5.05c revision:2001-07-08
0: uart:16550A port:3F8 irq:4 baud:2400
tx:11 rx:0 RTS