December 2021 - Wine-devel - list.winehq.org

[PATCH] wininet: Fix misleading indentation
by Alistair Leslie-Hughes 08 Dec '21

08 Dec '21

../wine/dlls/wininet/internet.c: In function ‘InternetSetOptionW’: ../wine/dlls/wininet/internet.c:2890:11: warning: this ‘else’ clause does not guard... [-Wmisleading-indentation] 2890 | } else | ^~~~ ../wine/dlls/wininet/internet.c:2892:13: note: ...this statement, but the latter is misleadingly indented as if it were guard ed by the ‘else’ 2892 | lpwhh->ErrorMask = *(ULONG*)lpBuffer; | ^~~~~ Signed-off-by: Alistair Leslie-Hughes <leslie_alistair(a)hotmail.com> --- dlls/wininet/internet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/dlls/wininet/internet.c b/dlls/wininet/internet.c index b0fe8a5e3fb..59fae2fbc95 100644 --- a/dlls/wininet/internet.c +++ b/dlls/wininet/internet.c @@ -2887,9 +2887,10 @@ BOOL WINAPI InternetSetOptionW(HINTERNET hInternet, DWORD dwOption, } else if(dwBufferLength != sizeof(ULONG)) { SetLastError(ERROR_INTERNET_BAD_OPTION_LENGTH); ret = FALSE; - } else + } else { TRACE("INTERNET_OPTION_ERROR_MASK: %x\n", *(ULONG*)lpBuffer); lpwhh->ErrorMask = *(ULONG*)lpBuffer; + } } break; case INTERNET_OPTION_PROXY: -- 2.33.0

1 0

[PATCH] dbghelp: Fix use after freed
by Alistair Leslie-Hughes 08 Dec '21

08 Dec '21

module_remove frees the module passed in. Signed-off-by: Alistair Leslie-Hughes <leslie_alistair(a)hotmail.com> --- dlls/dbghelp/module.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/dlls/dbghelp/module.c b/dlls/dbghelp/module.c index 5614c575cd0..894c713b3ce 100644 --- a/dlls/dbghelp/module.c +++ b/dlls/dbghelp/module.c @@ -1058,7 +1058,6 @@ BOOL WINAPI SymUnloadModule64(HANDLE hProcess, DWORD64 BaseOfDll) if (!pcs) return FALSE; module = module_find_by_addr(pcs, BaseOfDll, DMT_UNKNOWN); if (!module) return FALSE; - if (!module_remove(pcs, module)) return FALSE; /* remove local scope if defined inside this module */ if (pcs->localscope_pc >= module->module.BaseOfImage && pcs->localscope_pc < module->module.BaseOfImage + module->module.ImageSize) @@ -1066,6 +1065,7 @@ BOOL WINAPI SymUnloadModule64(HANDLE hProcess, DWORD64 BaseOfDll) pcs->localscope_pc = 0; pcs->localscope_symt = NULL; } + if (!module_remove(pcs, module)) return FALSE; return TRUE; } -- 2.33.0

1 0

[PATCH] dbghelp: Fix possible memory leak (Coverity)
by Alistair Leslie-Hughes 08 Dec '21

08 Dec '21

Signed-off-by: Alistair Leslie-Hughes <leslie_alistair(a)hotmail.com> --- dlls/dbghelp/dwarf.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/dlls/dbghelp/dwarf.c b/dlls/dbghelp/dwarf.c index 67440e97fe8..7515e540778 100644 --- a/dlls/dbghelp/dwarf.c +++ b/dlls/dbghelp/dwarf.c @@ -2314,7 +2314,10 @@ static struct symt* dwarf2_parse_subprogram(dwarf2_debug_info_t* di) * Actual thunks will be created in elf_module from the symbol table */ if (elf_is_in_thunk_area(di->unit_ctx->module_ctx->load_offset + addr_ranges[0].low, di->unit_ctx->module_ctx->thunks) >= 0) + { + free(addr_ranges); return NULL; + } ret_type = dwarf2_lookup_type(di); /* FIXME: assuming C source code */ -- 2.33.0

1 0

[PATCH 3/4] d2d1: Implement path_geometry_StrokeContainsPoint() for line segments.
by Henri Verbeet 08 Dec '21

08 Dec '21

From: David White <dwhite(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- dlls/d2d1/geometry.c | 69 ++++++++++++++++++++++++++++++++++++++++-- dlls/d2d1/tests/d2d1.c | 57 ++++++++++++++++++++++++++++++++++ 2 files changed, 123 insertions(+), 3 deletions(-) diff --git a/dlls/d2d1/geometry.c b/dlls/d2d1/geometry.c index af92df4f6c5..d5a430e1f74 100644 --- a/dlls/d2d1/geometry.c +++ b/dlls/d2d1/geometry.c @@ -3409,11 +3409,74 @@ static HRESULT STDMETHODCALLTYPE d2d_path_geometry_StrokeContainsPoint(ID2D1Path D2D1_POINT_2F point, float stroke_width, ID2D1StrokeStyle *stroke_style, const D2D1_MATRIX_3X2_F *transform, float tolerance, BOOL *contains) { - FIXME("iface %p, point %s, stroke_width %.8e, stroke_style %p, " - "transform %p, tolerance %.8e, contains %p stub!\n", + struct d2d_geometry *geometry = impl_from_ID2D1PathGeometry(iface); + enum d2d_vertex_type type = D2D_VERTEX_TYPE_NONE; + D2D1_POINT_2F p, p1; + unsigned int i, j; + + TRACE("iface %p, point %s, stroke_width %.8e, stroke_style %p, transform %p, tolerance %.8e, contains %p.\n", iface, debug_d2d_point_2f(&point), stroke_width, stroke_style, transform, tolerance, contains); - return E_NOTIMPL; + if (stroke_style) + FIXME("Ignoring stroke style %p.\n", stroke_style); + + if (!transform) + transform = &identity; + + if (tolerance <= 0.0f) + tolerance = D2D1_DEFAULT_FLATTENING_TOLERANCE; + + *contains = FALSE; + for (i = 0; i < geometry->u.path.figure_count; ++i) + { + const struct d2d_figure *figure = &geometry->u.path.figures[i]; + + for (j = 0; j < figure->vertex_count; ++j) + { + if (figure->vertex_types[j] == D2D_VERTEX_TYPE_NONE) + continue; + + p = figure->vertices[j]; + type = figure->vertex_types[j]; + break; + } + + for (++j; j < figure->vertex_count; ++j) + { + if (figure->vertex_types[j] == D2D_VERTEX_TYPE_NONE + || d2d_vertex_type_is_split_bezier(figure->vertex_types[j])) + continue; + + switch (type) + { + case D2D_VERTEX_TYPE_LINE: + p1 = figure->vertices[j]; + *contains = d2d_point_on_line_segment(&point, &p, &p1, transform, stroke_width * 0.5f, tolerance); + p = p1; + break; + + default: + FIXME("Unhandled vertex type %#x.\n", type); + p = figure->vertices[j]; + break; + } + if (*contains) + return S_OK; + type = figure->vertex_types[j]; + } + + if (figure->flags & D2D_FIGURE_FLAG_CLOSED && (!*contains) && type == D2D_VERTEX_TYPE_LINE) + { + p1 = figure->vertices[0]; + *contains = d2d_point_on_line_segment(&point, &p, &p1, transform, stroke_width * 0.5f, tolerance); + p = p1; + } + + if (*contains) + return S_OK; + } + + return S_OK; } static HRESULT STDMETHODCALLTYPE d2d_path_geometry_FillContainsPoint(ID2D1PathGeometry *iface, diff --git a/dlls/d2d1/tests/d2d1.c b/dlls/d2d1/tests/d2d1.c index 22381ca3782..15088d679df 100644 --- a/dlls/d2d1/tests/d2d1.c +++ b/dlls/d2d1/tests/d2d1.c @@ -10137,7 +10137,10 @@ static void test_effect_crop(BOOL d3d11) static void test_stroke_contains_point(BOOL d3d11) { ID2D1RectangleGeometry *rectangle; + ID2D1GeometrySink *sink; + ID2D1PathGeometry *path; ID2D1Factory *factory; + D2D1_POINT_2F point; D2D1_RECT_F rect; unsigned int i; BOOL contains; @@ -10220,6 +10223,27 @@ static void test_stroke_contains_point(BOOL d3d11) {{{{1.0f, 0.0f, 0.0f, 1.0f, 0.0f, 21.0f}}}, {10.0f, 31.0f}, 0.0f, 1.0f, TRUE, TRUE}, {{{{1.0f, 0.0f, 0.0f, 1.0f, 11.0f, 0.0f}}}, {16.0f, 0.0f}, 0.0f, 1.0f, TRUE, TRUE}, {{{{1.0f, 0.0f, 0.0f, 1.0f, 0.0f, -21.0f}}}, { 0.0f, -11.0f}, 0.0f, 1.0f, TRUE, TRUE}, + }, + path_tests[] = + { + /* 0. Stroked area hittesting. Edge. */ + {{{{0.0f}}}, {160.0f, 600.0f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {239.24f, 600.0f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {239.26f, 600.0f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {240.74f, 600.0f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {240.76f, 600.0f}, 0.0f, 1.0f, FALSE, FALSE}, + + /* 5. Negative tolerance. */ + {{{{0.0f}}}, {239.24f, 600.0f}, -1.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {239.26f, 600.0f}, -1.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {240.74f, 600.0f}, -1.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {240.76f, 600.0f}, -1.0f, 1.0f, FALSE, FALSE}, + + /* 9. Less than default tolerance. */ + {{{{0.0f}}}, {239.39f, 600.0f}, 0.1f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {239.41f, 600.0f}, 0.1f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {240.59f, 600.0f}, 0.1f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {240.61f, 600.0f}, 0.1f, 1.0f, FALSE, FALSE}, }; hr = D2D1CreateFactory(D2D1_FACTORY_TYPE_SINGLE_THREADED, &IID_ID2D1Factory, NULL, (void **)&factory); @@ -10244,6 +10268,39 @@ static void test_stroke_contains_point(BOOL d3d11) } ID2D1RectangleGeometry_Release(rectangle); + hr = ID2D1Factory_CreatePathGeometry(factory, &path); + ok(hr == S_OK, "Got unexpected hr %#x.\n", hr); + hr = ID2D1PathGeometry_Open(path, &sink); + ok(hr == S_OK, "Got unexpected hr %#x.\n", hr); + + set_point(&point, 160.0f, 240.0f); + ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); + line_to(sink, 240.0f, 240.0f); + line_to(sink, 240.0f, 720.0f); + line_to(sink, 160.0f, 720.0f); + ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_OPEN); + + hr = ID2D1GeometrySink_Close(sink); + ok(hr == S_OK, "Got unexpected hr %#x.\n", hr); + ID2D1GeometrySink_Release(sink); + + for (i = 0; i < ARRAY_SIZE(path_tests); ++i) + { + const struct contains_point_test *test = &path_tests[i]; + + winetest_push_context("Test %u", i); + + contains = !test->contains; + hr = ID2D1PathGeometry_StrokeContainsPoint(path, test->point, test->stroke_width, + NULL, test->matrix ? &test->transform : NULL, test->tolerance, &contains); + ok(hr == S_OK, "Got unexpected hr %#x.\n", hr); + ok(contains == test->contains, "Got unexpected result %#x.\n", contains); + + winetest_pop_context(); + } + + ID2D1PathGeometry_Release(path); + ID2D1Factory_Release(factory); } -- 2.30.2

2 1

[PATCH 2/4] d2d1: Implement d2d_rectangle_geometry_StrokeContainsPoint().
by Henri Verbeet 08 Dec '21

08 Dec '21

From: Nikolay Sivov <nsivov(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- dlls/d2d1/geometry.c | 154 ++++++++++++++++++++++++++++++++++++++++- dlls/d2d1/tests/d2d1.c | 114 ++++++++++++++++++++++++++++++ 2 files changed, 265 insertions(+), 3 deletions(-) diff --git a/dlls/d2d1/geometry.c b/dlls/d2d1/geometry.c index 49e4393ffec..af92df4f6c5 100644 --- a/dlls/d2d1/geometry.c +++ b/dlls/d2d1/geometry.c @@ -402,11 +402,16 @@ static void d2d_point_calculate_bezier(D2D1_POINT_2F *out, const D2D1_POINT_2F * out->y = t_c * (t_c * p0->y + t * p1->y) + t * (t_c * p1->y + t * p2->y); } +static float d2d_point_length(const D2D1_POINT_2F *p) +{ + return sqrtf(d2d_point_dot(p, p)); +} + static void d2d_point_normalise(D2D1_POINT_2F *p) { float l; - if ((l = sqrtf(d2d_point_dot(p, p))) != 0.0f) + if ((l = d2d_point_length(p)) != 0.0f) d2d_point_scale(p, 1.0f / l); } @@ -504,6 +509,83 @@ static float d2d_point_ccw(const D2D1_POINT_2F *a, const D2D1_POINT_2F *b, const return det_d[det_d_len - 1]; } +/* Determine whether the point q is within the given tolerance of the line + * segment defined by p0 and p1, with the given stroke width and transform. + * Note that we don't care about the tolerance with respect to end-points or + * joins here; those are handled separately. */ +static BOOL d2d_point_on_line_segment(const D2D1_POINT_2F *q, const D2D1_POINT_2F *p0, + const D2D1_POINT_2F *p1, const D2D1_MATRIX_3X2_F *transform, float stroke_width, float tolerance) +{ + D2D1_POINT_2F v_n, v_p, v_q, v_r; + float l; + + d2d_point_subtract(&v_p, p1, p0); + if ((l = d2d_point_length(&v_p)) == 0.0f) + return FALSE; + + /* After (shear) transformation, the line segment is a parallelogram + * defined by p⃑' and n⃑': + * + * p⃑ = P₁ - P₀ + * n⃑ = wp̂⟂ + * p⃑' = p⃑T + * n⃑' = n⃑T */ + l = stroke_width / l; + d2d_point_set(&v_r, transform->_31, transform->_32); + d2d_point_transform(&v_n, transform, -v_p.y * l, v_p.x * l); + d2d_point_subtract(&v_n, &v_n, &v_r); + d2d_point_transform(&v_p, transform, v_p.x, v_p.y); + d2d_point_subtract(&v_p, &v_p, &v_r); + + /* Decompose the vector q⃑ = Q - P₀T into a linear combination of + * p⃑' and n⃑': + * + * lq⃑ = xp⃑' + yn⃑' */ + d2d_point_transform(&v_q, transform, p0->x, p0->y); + d2d_point_subtract(&v_q, q, &v_q); + l = v_p.x * v_n.y - v_p.y * v_n.x; + v_r.x = v_q.x * v_n.y - v_q.y * v_n.x; + v_r.y = v_q.x * v_p.y - v_q.y * v_p.x; + + if (l < 0.0f) + { + l *= -1.0f; + v_r.x *= -1.0f; + } + + /* Check where Q projects onto p⃑'. */ + if (v_r.x < 0.0f || v_r.x > l) + return FALSE; + + /* Check where Q projects onto n⃑'. */ + if (fabs(v_r.y) < l) + return TRUE; + + /* Q lies outside the segment. Check whether the distance to the edge is + * within the tolerance. + * + * P₀' = P₀T + n⃑' + * q⃑' = Q - P₀' + * = q⃑ - n⃑' + * + * The distance is then q⃑' · p̂'⟂. */ + + if (v_r.y > 0.0f) + d2d_point_scale(&v_n, -1.0f); + d2d_point_subtract(&v_q, &v_q, &v_n); + + /* Check where Q projects onto p⃑' + n⃑'. */ + l = d2d_point_dot(&v_q, &v_p); + if (l < 0.0f || l > d2d_point_dot(&v_p, &v_p)) + return FALSE; + + v_n.x = -v_p.y; + v_n.y = v_p.x; + d2d_point_normalise(&v_n); + + return fabsf(d2d_point_dot(&v_q, &v_n)) < tolerance; +} + static void d2d_rect_union(D2D1_RECT_F *l, const D2D1_RECT_F *r) { l->left = min(l->left, r->left); @@ -4043,10 +4125,76 @@ static HRESULT STDMETHODCALLTYPE d2d_rectangle_geometry_StrokeContainsPoint(ID2D D2D1_POINT_2F point, float stroke_width, ID2D1StrokeStyle *stroke_style, const D2D1_MATRIX_3X2_F *transform, float tolerance, BOOL *contains) { - FIXME("iface %p, point %s, stroke_width %.8e, stroke_style %p, transform %p, tolerance %.8e, contains %p stub!\n", + const struct d2d_geometry *geometry = impl_from_ID2D1RectangleGeometry(iface); + const D2D1_RECT_F *rect = &geometry->u.rectangle.rect; + unsigned int i; + struct + { + D2D1_POINT_2F s, e; + } + segments[4]; + + TRACE("iface %p, point %s, stroke_width %.8e, stroke_style %p, transform %p, tolerance %.8e, contains %p.\n", iface, debug_d2d_point_2f(&point), stroke_width, stroke_style, transform, tolerance, contains); - return E_NOTIMPL; + if (stroke_style) + FIXME("Ignoring stroke style %p.\n", stroke_style); + + tolerance = fabsf(tolerance); + + if (!transform) + { + D2D1_POINT_2F d, s; + + s.x = rect->right - rect->left; + s.y = rect->bottom - rect->top; + d.x = fabsf((rect->right + rect->left) * 0.5f - point.x); + d.y = fabsf((rect->bottom + rect->top) * 0.5f - point.y); + + /* Inside test. */ + if (d.x <= (s.x - stroke_width) * 0.5f - tolerance && d.y <= (s.y - stroke_width) * 0.5f - tolerance) + { + *contains = FALSE; + return S_OK; + } + + if (tolerance == 0.0f) + { + *contains = d.x < (s.x + stroke_width) * 0.5f && d.y < (s.y + stroke_width) * 0.5f; + } + else + { + d.x = max(d.x - (s.x + stroke_width) * 0.5f, 0.0f); + d.y = max(d.y - (s.y + stroke_width) * 0.5f, 0.0f); + + *contains = d2d_point_dot(&d, &d) < tolerance * tolerance; + } + + return S_OK; + } + + stroke_width *= 0.5f; + + d2d_point_set(&segments[0].s, rect->left - stroke_width, rect->bottom); + d2d_point_set(&segments[0].e, rect->right + stroke_width, rect->bottom); + d2d_point_set(&segments[1].s, rect->right, rect->bottom + stroke_width); + d2d_point_set(&segments[1].e, rect->right, rect->top - stroke_width); + d2d_point_set(&segments[2].s, rect->right + stroke_width, rect->top); + d2d_point_set(&segments[2].e, rect->left - stroke_width, rect->top); + d2d_point_set(&segments[3].s, rect->left, rect->top - stroke_width); + d2d_point_set(&segments[3].e, rect->left, rect->bottom + stroke_width); + + *contains = FALSE; + for (i = 0; i < ARRAY_SIZE(segments); ++i) + { + if (d2d_point_on_line_segment(&point, &segments[i].s, &segments[i].e, transform, stroke_width, tolerance)) + { + *contains = TRUE; + break; + } + } + + return S_OK; } static HRESULT STDMETHODCALLTYPE d2d_rectangle_geometry_FillContainsPoint(ID2D1RectangleGeometry *iface, diff --git a/dlls/d2d1/tests/d2d1.c b/dlls/d2d1/tests/d2d1.c index cf37efdc7e8..22381ca3782 100644 --- a/dlls/d2d1/tests/d2d1.c +++ b/dlls/d2d1/tests/d2d1.c @@ -10134,6 +10134,119 @@ static void test_effect_crop(BOOL d3d11) release_test_context(&ctx); } +static void test_stroke_contains_point(BOOL d3d11) +{ + ID2D1RectangleGeometry *rectangle; + ID2D1Factory *factory; + D2D1_RECT_F rect; + unsigned int i; + BOOL contains; + HRESULT hr; + + static const struct contains_point_test + { + D2D1_MATRIX_3X2_F transform; + D2D1_POINT_2F point; + float tolerance; + float stroke_width; + BOOL matrix; + BOOL contains; + } + rectangle_tests[] = + { + /* 0. Stroked area hittesting. Edge. */ + {{{{0.0f}}}, { 0.4f, 10.0f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, { 0.5f, 10.0f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, { 0.6f, 10.0f}, 0.0f, 1.0f, FALSE, FALSE}, + + /* 3. Negative tolerance. */ + {{{{0.0f}}}, {-0.6f, 10.0f}, -1.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, { 0.6f, 10.0f}, -1.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, { 1.4f, 10.0f}, -1.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, { 1.5f, 10.0f}, -1.0f, 1.0f, FALSE, FALSE}, + + /* 7. Within tolerance limit around corner. */ + {{{{0.0f}}}, {-D2D1_DEFAULT_FLATTENING_TOLERANCE - 1.00f, 0.0f}, 0.0f, 2.0f, FALSE, FALSE}, + {{{{0.0f}}}, {-D2D1_DEFAULT_FLATTENING_TOLERANCE - 1.01f, 0.0f}, 0.0f, 2.0f, FALSE, FALSE}, + {{{{0.0f}}}, {-D2D1_DEFAULT_FLATTENING_TOLERANCE, -D2D1_DEFAULT_FLATTENING_TOLERANCE}, + 0.0f, 2.0f, FALSE, TRUE}, + {{{{0.0f}}}, {-D2D1_DEFAULT_FLATTENING_TOLERANCE, -D2D1_DEFAULT_FLATTENING_TOLERANCE - 1.01f}, + 0.0f, 2.0f, FALSE, FALSE}, + + /* 11. Center point. */ + {{{{0.0f}}}, { 5.0f, 10.0f}, 0.0f, 1.0f, FALSE, FALSE}, + + /* 12. Center point, large stroke width. */ + {{{{0.0f}}}, { 5.0f, 10.0f}, 0.0f, 100.0f, FALSE, TRUE}, + + /* 13. Center point, large tolerance. */ + {{{{0.0f}}}, { 5.0f, 10.0f}, 50.0f, 10.0f, FALSE, TRUE}, + + /* With transformation matrix. */ + + /* 14. */ + {{{{0.0f, 0.0f, 0.0f, 1.0f}}}, {0.1f, 10.0f}, 0.0f, 1.0f, TRUE, FALSE}, + {{{{0.0f, 0.0f, 0.0f, 1.0f}}}, {5.0f, 10.0f}, 5.0f, 1.0f, TRUE, FALSE}, + {{{{0.0f, 0.0f, 0.0f, 1.0f}}}, {4.9f, 10.0f}, 5.0f, 1.0f, TRUE, TRUE}, + {{{{0.0f, 0.0f, 0.0f, 1.0f}}}, {5.0f, 10.0f}, -5.0f, 1.0f, TRUE, FALSE}, + {{{{0.0f, 0.0f, 0.0f, 1.0f}}}, {4.9f, 10.0f}, -5.0f, 1.0f, TRUE, TRUE}, + + /* 19. */ + {{{{1.0f, 0.0f, 0.0f, 1.0f}}}, {0.0f, 10.0f}, 0.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f}}}, {0.1f, 10.0f}, 0.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f}}}, {0.5f, 10.0f}, 0.0f, 1.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f}}}, {0.0f, 10.0f}, 1.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f}}}, {0.59f, 10.0f}, 1.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f}}}, {-0.59f, 10.0f}, 1.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f}}}, {0.59f, 10.0f}, -1.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f}}}, {-0.59f, 10.0f}, -1.0f, 1.0f, TRUE, TRUE}, + + /* 27. */ + {{{{1.0f, 1.0f, 0.0f, 1.0f}}}, {5.0f, 4.4f}, 0.0f, 1.0f, TRUE, FALSE}, + {{{{1.0f, 1.0f, 0.0f, 1.0f}}}, {5.0f, 4.6f}, 0.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 1.0f, 0.0f, 1.0f}}}, {5.0f, 5.4f}, 0.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 1.0f, 0.0f, 1.0f}}}, {5.0f, 5.6f}, 0.0f, 1.0f, TRUE, FALSE}, + + /* 31. */ + {{{{1.0f, 1.0f, 0.0f, 1.0f}}}, {5.0f, 6.9f}, 1.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 1.0f, 0.0f, 1.0f}}}, {5.0f, 7.0f}, 1.0f, 1.0f, TRUE, FALSE}, + + /* 33. Offset matrix */ + {{{{1.0f, 0.0f, 0.0f, 1.0f, -11.0f, 0.0f}}}, { 5.0f, 20.0f}, 0.0f, 1.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 0.0f, 21.0f}}}, {10.0f, 10.0f}, 0.0f, 1.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 11.0f, 0.0f}}}, { 5.0f, 0.0f}, 0.0f, 1.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 0.0f, -21.0f}}}, { 0.0f, 10.0f}, 0.0f, 1.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, -11.0f, 0.0f}}}, {-6.0f, 20.0f}, 0.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 0.0f, 21.0f}}}, {10.0f, 31.0f}, 0.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 11.0f, 0.0f}}}, {16.0f, 0.0f}, 0.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 0.0f, -21.0f}}}, { 0.0f, -11.0f}, 0.0f, 1.0f, TRUE, TRUE}, + }; + + hr = D2D1CreateFactory(D2D1_FACTORY_TYPE_SINGLE_THREADED, &IID_ID2D1Factory, NULL, (void **)&factory); + ok(hr == S_OK, "Got unexpected hr %#x.\n", hr); + + set_rect(&rect, 0.0f, 0.0f, 10.0f, 20.0f); + hr = ID2D1Factory_CreateRectangleGeometry(factory, &rect, &rectangle); + ok(hr == S_OK, "Got unexpected hr %#x.\n", hr); + for (i = 0; i < ARRAY_SIZE(rectangle_tests); ++i) + { + const struct contains_point_test *test = &rectangle_tests[i]; + + winetest_push_context("Test %u", i); + + contains = !test->contains; + hr = ID2D1RectangleGeometry_StrokeContainsPoint(rectangle, test->point, test->stroke_width, + NULL, test->matrix ? &test->transform : NULL, test->tolerance, &contains); + ok(hr == S_OK, "Got unexpected hr %#x.\n", hr); + ok(contains == test->contains, "Got unexpected result %#x.\n", contains); + + winetest_pop_context(); + } + ID2D1RectangleGeometry_Release(rectangle); + + ID2D1Factory_Release(factory); +} + START_TEST(d2d1) { HMODULE d2d1_dll = GetModuleHandleA("d2d1.dll"); @@ -10198,6 +10311,7 @@ START_TEST(d2d1) queue_test(test_effect); queue_test(test_effect_2d_affine); queue_test(test_effect_crop); + queue_d3d10_test(test_stroke_contains_point); run_queued_tests(); } -- 2.30.2

2 1

[PATCH 4/4] d2d1: Implement path_geometry_StrokeContainsPoint() for Bézier segments.
by Henri Verbeet 08 Dec '21

08 Dec '21

From: David White <dwhite(a)codeweavers.com> Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- dlls/d2d1/geometry.c | 198 +++++++++++++++++++++++++++++++++++++++-- dlls/d2d1/tests/d2d1.c | 93 +++++++++++++++++++ 2 files changed, 285 insertions(+), 6 deletions(-) diff --git a/dlls/d2d1/geometry.c b/dlls/d2d1/geometry.c index d5a430e1f74..a7074899fda 100644 --- a/dlls/d2d1/geometry.c +++ b/dlls/d2d1/geometry.c @@ -586,6 +586,172 @@ static BOOL d2d_point_on_line_segment(const D2D1_POINT_2F *q, const D2D1_POINT_2 return fabsf(d2d_point_dot(&v_q, &v_n)) < tolerance; } +/* Approximate the Bézier segment with a (wide) line segment. If the point + * lies outside the approximation, we're done. If the width of the + * approximation is less than the tolerance and the point lies inside, we're + * also done. If neither of those is the case, we subdivide the Bézier segment + * and try again. */ +static BOOL d2d_point_on_bezier_segment(const D2D1_POINT_2F *q, const D2D1_POINT_2F *p0, + const D2D1_BEZIER_SEGMENT *b, const D2D1_MATRIX_3X2_F *transform, float stroke_width, float tolerance) +{ + float d1, d2, d3, d4, d, l, m, w, w2; + D2D1_POINT_2F t[7], start, end, v_p; + D2D1_BEZIER_SEGMENT b0, b1; + + m = 1.0f; + w = stroke_width * 0.5f; + + d2d_point_subtract(&v_p, &b->point3, p0); + /* If the endpoints coincide, use the line through the control points as + * the direction vector. That choice is somewhat arbitrary; other choices + * with tighter error bounds exist. */ + if ((l = d2d_point_dot(&v_p, &v_p)) == 0.0f) + { + d2d_point_subtract(&v_p, &b->point2, &b->point1); + /* If the control points also coincide, the curve is in fact a line. */ + if ((l = d2d_point_dot(&v_p, &v_p)) == 0.0f) + { + d2d_point_subtract(&v_p, &b->point1, p0); + end.x = p0->x + 0.75f * v_p.x; + end.y = p0->y + 0.75f * v_p.y; + + return d2d_point_on_line_segment(q, p0, &end, transform, w, tolerance); + } + m = 0.0f; + } + l = sqrtf(l); + d2d_point_scale(&v_p, 1.0f / l); + m *= l; + + /* Calculate the width w2 of the approximation. */ + + end.x = p0->x + v_p.x; + end.y = p0->y + v_p.y; + /* Here, d1 and d2 are the maximum (signed) distance of the control points + * from the line through the start and end points. */ + d1 = d2d_point_ccw(p0, &end, &b->point1); + d2 = d2d_point_ccw(p0, &end, &b->point2); + /* It can be shown that if the control points of a cubic Bézier curve lie + * on the same side of the line through the endpoints, the distance of the + * curve itself to that line will be within 3/4 of the distance of the + * control points to that line; if the control points lie on opposite + * sides, that distance will be within 4/9 of the distance of the + * corresponding control point. We're taking that as a given here. */ + if (d1 * d2 > 0.0f) + { + d1 *= 0.75f; + d2 *= 0.75f; + } + else + { + d1 = (d1 * 4.0f) / 9.0f; + d2 = (d2 * 4.0f) / 9.0f; + } + w2 = max(fabsf(d1), fabsf(d2)); + + /* Project the control points onto the line through the endpoints of the + * curve. We will use these to calculate the endpoints of the + * approximation. */ + d2d_point_subtract(&t[1], &b->point1, p0); + d1 = d2d_point_dot(&v_p, &t[1]); + d2d_point_subtract(&t[2], &b->point2, p0); + d2 = d2d_point_dot(&v_p, &t[2]); + + /* Calculate the start point of the approximation. Like further above, the + * actual curve is somewhat closer to the endpoints than the control + * points are. */ + d = min(min(d1, d2), 0); + if (d1 * d2 > 0.0f) + d *= 0.75f; + else + d = (d * 4.0f) / 9.0f; + /* Account for the stroke width and tolerance around the endpoints by + * adjusting the endpoints here. This matters because there are no joins + * in the original geometry for the places where we subdivide the original + * curve. We do this here because it's easy; alternatively we could + * explicitly test for this when subdividing the curve further below. */ + d -= min(w + tolerance, w2); + start.x = p0->x + d * v_p.x; + start.y = p0->y + d * v_p.y; + + /* Calculate the end point of the approximation. */ + d1 -= m; + d2 -= m; + d = max(max(d1, d2), 0); + if (d1 * d2 > 0.0f) + d = m + d * 0.75f; + else + d = m + (d * 4.0f) / 9.0f; + d += min(w2, w + tolerance); + end.x = p0->x + d * v_p.x; + end.y = p0->y + d * v_p.y; + + /* Calculate the error bounds of the approximation. We do this in + * transformed space because we need these to be relative to the given + * tolerance. */ + + d2d_point_transform(&t[0], transform, p0->x, p0->y); + d2d_point_transform(&t[1], transform, b->point1.x, b->point1.y); + d2d_point_transform(&t[2], transform, b->point2.x, b->point2.y); + d2d_point_transform(&t[3], transform, b->point3.x, b->point3.y); + d2d_point_transform(&t[4], transform, start.x, start.y); + d2d_point_transform(&t[5], transform, end.x, end.y); + + d2d_point_subtract(&t[6], &t[5], &t[4]); + l = d2d_point_length(&t[6]); + /* Here, d1 and d2 are the maximum (signed) distance of the control points + * from the line through the start and end points. */ + d1 = d2d_point_ccw(&t[4], &t[5], &t[1]) / l; + d2 = d2d_point_ccw(&t[4], &t[5], &t[2]) / l; + if (d1 * d2 > 0.0f) + { + d1 *= 0.75f; + d2 *= 0.75f; + } + else + { + d1 = (d1 * 4.0f) / 9.0f; + d2 = (d2 * 4.0f) / 9.0f; + } + l = max(max(d1, d2), 0) - min(min(d1, d2), 0); + + /* d3 and d4 are the (unsigned) distance of the endpoints of the + * approximation from the original endpoints. */ + d2d_point_subtract(&t[6], &t[4], &t[0]); + d3 = d2d_point_length(&t[6]); + d2d_point_subtract(&t[6], &t[5], &t[3]); + d4 = d2d_point_length(&t[6]); + l = max(max(d3, d4), l); + + /* If the error of the approximation is less than the tolerance, and Q + * lies on the approximation, the distance of Q to the stroked curve is + * definitely within the tolerance. */ + if (l <= tolerance && d2d_point_on_line_segment(q, &start, &end, transform, w, tolerance - l)) + return TRUE; + /* On the other hand, if the distance of Q to the stroked curve is more + * than the sum of the tolerance and d, the distance of Q to the stroked + * curve can't possibly be within the tolerance. */ + if (!d2d_point_on_line_segment(q, &start, &end, transform, w + w2, tolerance)) + return FALSE; + + /* Subdivide the curve. Note that simply splitting the segment in half + * here works and is easy, but may not be optimal. We could potentially + * reduce the number of iterations we need to do by splitting based on + * curvature or segment length. */ + d2d_point_lerp(&t[0], &b->point1, &b->point2, 0.5f); + + b1.point3 = b->point3; + d2d_point_lerp(&b1.point2, &b->point3, &b->point2, 0.5f); + d2d_point_lerp(&b1.point1, &t[0], &b1.point2, 0.5f); + + d2d_point_lerp(&b0.point1, p0, &b->point1, 0.5f); + d2d_point_lerp(&b0.point2, &t[0], &b0.point1, 0.5f); + d2d_point_lerp(&b0.point3, &b0.point2, &b1.point1, 0.5f); + + return d2d_point_on_bezier_segment(q, p0, &b0, transform, stroke_width, tolerance) + || d2d_point_on_bezier_segment(q, &b0.point3, &b1, transform, stroke_width, tolerance); +} + static void d2d_rect_union(D2D1_RECT_F *l, const D2D1_RECT_F *r) { l->left = min(l->left, r->left); @@ -3411,8 +3577,9 @@ static HRESULT STDMETHODCALLTYPE d2d_path_geometry_StrokeContainsPoint(ID2D1Path { struct d2d_geometry *geometry = impl_from_ID2D1PathGeometry(iface); enum d2d_vertex_type type = D2D_VERTEX_TYPE_NONE; + unsigned int i, j, bezier_idx; + D2D1_BEZIER_SEGMENT b; D2D1_POINT_2F p, p1; - unsigned int i, j; TRACE("iface %p, point %s, stroke_width %.8e, stroke_style %p, transform %p, tolerance %.8e, contains %p.\n", iface, debug_d2d_point_2f(&point), stroke_width, stroke_style, transform, tolerance, contains); @@ -3441,7 +3608,7 @@ static HRESULT STDMETHODCALLTYPE d2d_path_geometry_StrokeContainsPoint(ID2D1Path break; } - for (++j; j < figure->vertex_count; ++j) + for (bezier_idx = 0, ++j; j < figure->vertex_count; ++j) { if (figure->vertex_types[j] == D2D_VERTEX_TYPE_NONE || d2d_vertex_type_is_split_bezier(figure->vertex_types[j])) @@ -3455,6 +3622,14 @@ static HRESULT STDMETHODCALLTYPE d2d_path_geometry_StrokeContainsPoint(ID2D1Path p = p1; break; + case D2D_VERTEX_TYPE_BEZIER: + b.point1 = figure->original_bezier_controls[bezier_idx++]; + b.point2 = figure->original_bezier_controls[bezier_idx++]; + b.point3 = figure->vertices[j]; + *contains = d2d_point_on_bezier_segment(&point, &p, &b, transform, stroke_width, tolerance); + p = b.point3; + break; + default: FIXME("Unhandled vertex type %#x.\n", type); p = figure->vertices[j]; @@ -3465,11 +3640,22 @@ static HRESULT STDMETHODCALLTYPE d2d_path_geometry_StrokeContainsPoint(ID2D1Path type = figure->vertex_types[j]; } - if (figure->flags & D2D_FIGURE_FLAG_CLOSED && (!*contains) && type == D2D_VERTEX_TYPE_LINE) + if (figure->flags & D2D_FIGURE_FLAG_CLOSED && (!*contains)) { - p1 = figure->vertices[0]; - *contains = d2d_point_on_line_segment(&point, &p, &p1, transform, stroke_width * 0.5f, tolerance); - p = p1; + if (type == D2D_VERTEX_TYPE_LINE) + { + p1 = figure->vertices[0]; + *contains = d2d_point_on_line_segment(&point, &p, &p1, transform, stroke_width * 0.5f, tolerance); + p = p1; + } + else if (d2d_vertex_type_is_bezier(type)) + { + b.point1 = figure->original_bezier_controls[bezier_idx++]; + b.point2 = figure->original_bezier_controls[bezier_idx++]; + b.point3 = figure->vertices[0]; + *contains = d2d_point_on_bezier_segment(&point, &p, &b, transform, stroke_width, tolerance); + p = b.point3; + } } if (*contains) diff --git a/dlls/d2d1/tests/d2d1.c b/dlls/d2d1/tests/d2d1.c index 15088d679df..70c47795b4e 100644 --- a/dlls/d2d1/tests/d2d1.c +++ b/dlls/d2d1/tests/d2d1.c @@ -10244,6 +10244,67 @@ static void test_stroke_contains_point(BOOL d3d11) {{{{0.0f}}}, {239.41f, 600.0f}, 0.1f, 1.0f, FALSE, TRUE}, {{{{0.0f}}}, {240.59f, 600.0f}, 0.1f, 1.0f, FALSE, TRUE}, {{{{0.0f}}}, {240.61f, 600.0f}, 0.1f, 1.0f, FALSE, FALSE}, + + /* 13. Curves. */ + {{{{1.0f, 0.0f, 0.0f, 1.0f, 10.0f, 10.0f}}}, {170.0f, 418.6f}, 0.0f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 10.0f, 10.0f}}}, {170.0f, 420.1f}, 0.0f, 1.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 10.0f, 10.0f}}}, {170.0f, 417.7f}, 0.0f, 1.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 10.0f, 10.0f}}}, { 89.5f, 485.3f}, 0.1f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 10.0f, 10.0f}}}, { 90.5f, 485.3f}, 0.1f, 1.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 10.0f, 10.0f}}}, { 91.5f, 485.3f}, 0.1f, 1.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 0.0f, 1.0f, 10.0f, 10.0f}}}, { 89.0f, 485.3f}, 0.1f, 1.0f, TRUE, FALSE}, + + /* 20. A curve where the control points project beyond the endpoints + * onto the line through the endpoints. */ + {{{{0.0f}}}, {306.97f, 791.67f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {307.27f, 791.67f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {308.47f, 791.67f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {308.77f, 791.67f}, 0.0f, 1.0f, FALSE, FALSE}, + + {{{{0.0f}}}, {350.00f, 824.10f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {350.00f, 824.40f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {350.00f, 825.60f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {350.00f, 825.90f}, 0.0f, 1.0f, FALSE, FALSE}, + + {{{{0.0f}}}, {391.23f, 791.67f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {391.53f, 791.67f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {392.73f, 791.67f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {393.03f, 791.67f}, 0.0f, 1.0f, FALSE, FALSE}, + + /* 32. A curve where the endpoints coincide. */ + {{{{0.0f}}}, {570.23f, 799.77f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {570.53f, 799.77f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {571.73f, 799.77f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {572.03f, 799.77f}, 0.0f, 1.0f, FALSE, FALSE}, + + {{{{0.0f}}}, {600.00f, 824.10f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {600.00f, 824.40f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {600.00f, 825.60f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {600.00f, 825.90f}, 0.0f, 1.0f, FALSE, FALSE}, + + {{{{0.0f}}}, {627.97f, 799.77f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {628.27f, 799.77f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {629.47f, 799.77f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {629.77f, 799.77f}, 0.0f, 1.0f, FALSE, FALSE}, + + /* 44. A curve with coinciding endpoints, as well as coinciding + * control points. */ + {{{{0.0f}}}, {825.00f, 800.00f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {861.00f, 824.00f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {861.00f, 826.00f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {862.50f, 825.00f}, 0.0f, 1.0f, FALSE, TRUE}, + {{{{0.0f}}}, {864.00f, 824.00f}, 0.0f, 1.0f, FALSE, FALSE}, + {{{{0.0f}}}, {864.00f, 826.00f}, 0.0f, 1.0f, FALSE, FALSE}, + + /* 50. Shear transforms. */ + {{{{1.0f, 0.0f, 1.0f, 1.0f}}}, { 837.2f, 600.0f}, 0.1f, 5.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 1.0f, 1.0f}}}, { 837.5f, 600.0f}, 0.1f, 5.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 1.0f, 1.0f}}}, {1186.3f, 791.7f}, 0.1f, 5.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 1.0f, 1.0f}}}, {1186.6f, 791.7f}, 0.1f, 5.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 1.0f, 1.0f}}}, {1425.0f, 827.3f}, 0.1f, 5.0f, TRUE, TRUE}, + {{{{1.0f, 0.0f, 1.0f, 1.0f}}}, {1425.0f, 827.6f}, 0.1f, 5.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 1.0f, 1.0f}}}, {1620.1f, 800.0f}, 0.1f, 5.0f, TRUE, FALSE}, + {{{{1.0f, 0.0f, 1.0f, 1.0f}}}, {1620.4f, 800.0f}, 0.1f, 5.0f, TRUE, TRUE}, }; hr = D2D1CreateFactory(D2D1_FACTORY_TYPE_SINGLE_THREADED, &IID_ID2D1Factory, NULL, (void **)&factory); @@ -10273,6 +10334,19 @@ static void test_stroke_contains_point(BOOL d3d11) hr = ID2D1PathGeometry_Open(path, &sink); ok(hr == S_OK, "Got unexpected hr %#x.\n", hr); + /* A limaçon. */ + set_point(&point, 160.0f, 720.0f); + ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); + cubic_to(sink, 119.0f, 720.0f, 83.0f, 600.0f, 80.0f, 474.0f); + cubic_to(sink, 78.0f, 349.0f, 108.0f, 245.0f, 135.0f, 240.0f); + cubic_to(sink, 163.0f, 235.0f, 180.0f, 318.0f, 176.0f, 370.0f); + cubic_to(sink, 171.0f, 422.0f, 149.0f, 422.0f, 144.0f, 370.0f); + cubic_to(sink, 140.0f, 318.0f, 157.0f, 235.0f, 185.0f, 240.0f); + cubic_to(sink, 212.0f, 245.0f, 242.0f, 349.0f, 240.0f, 474.0f); + cubic_to(sink, 238.0f, 600.0f, 201.0f, 720.0f, 160.0f, 720.0f); + ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); + + /* Some straight lines. */ set_point(&point, 160.0f, 240.0f); ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); line_to(sink, 240.0f, 240.0f); @@ -10280,6 +10354,25 @@ static void test_stroke_contains_point(BOOL d3d11) line_to(sink, 160.0f, 720.0f); ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_OPEN); + /* Projected control points extending beyond the line segment through the + * endpoints. */ + set_point(&point, 325.0f, 750.0f); + ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); + cubic_to(sink, 250.0f, 850.0f, 450.0f, 850.0f, 375.0f, 750.0f); + ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_OPEN); + + /* Coinciding endpoints. */ + set_point(&point, 600.0f, 750.0f); + ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); + cubic_to(sink, 500.0f, 850.0f, 700.0f, 850.0f, 600.0f, 750.0f); + ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_OPEN); + + /* Coinciding endpoints, as well as coinciding control points. */ + set_point(&point, 750.0f, 750.0f); + ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); + cubic_to(sink, 900.0f, 850.0f, 900.0f, 850.0f, 750.0f, 750.0f); + ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_OPEN); + hr = ID2D1GeometrySink_Close(sink); ok(hr == S_OK, "Got unexpected hr %#x.\n", hr); ID2D1GeometrySink_Release(sink); -- 2.30.2

1 0

[PATCH 1/4] d2d1: Store original Bézier curves as cubics.
by Henri Verbeet 08 Dec '21

08 Dec '21

Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com> --- dlls/d2d1/geometry.c | 127 +++++++++++++++++++++++++++++-------------- 1 file changed, 85 insertions(+), 42 deletions(-) diff --git a/dlls/d2d1/geometry.c b/dlls/d2d1/geometry.c index c7d0d94f1ad..49e4393ffec 100644 --- a/dlls/d2d1/geometry.c +++ b/dlls/d2d1/geometry.c @@ -72,6 +72,7 @@ struct d2d_figure size_t bezier_control_count; D2D1_POINT_2F *original_bezier_controls; + size_t original_bezier_controls_size; size_t original_bezier_control_count; D2D1_RECT_F bounds; @@ -656,6 +657,22 @@ static BOOL d2d_figure_add_bezier_controls(struct d2d_figure *figure, size_t cou return TRUE; } +static BOOL d2d_figure_add_original_bezier_controls(struct d2d_figure *figure, size_t count, const D2D1_POINT_2F *p) +{ + if (!d2d_array_reserve((void **)&figure->original_bezier_controls, &figure->original_bezier_controls_size, + figure->original_bezier_control_count + count, sizeof(*figure->original_bezier_controls))) + { + ERR("Failed to grow cubic Bézier controls array.\n"); + return FALSE; + } + + memcpy(&figure->original_bezier_controls[figure->original_bezier_control_count], + p, count * sizeof(*figure->original_bezier_controls)); + figure->original_bezier_control_count += count; + + return TRUE; +} + static void d2d_cdt_edge_rot(struct d2d_cdt_edge_ref *dst, const struct d2d_cdt_edge_ref *src) { dst->idx = src->idx; @@ -2595,7 +2612,15 @@ static void STDMETHODCALLTYPE d2d_geometry_sink_AddBeziers(ID2D1GeometrySink *if { D2D1_RECT_F bezier_bounds; - /* FIXME: This tries to approximate a cubic bezier with a quadratic one. */ + if (!d2d_figure_add_original_bezier_controls(figure, 1, &beziers[i].point1) + || !d2d_figure_add_original_bezier_controls(figure, 1, &beziers[i].point2)) + { + ERR("Failed to add cubic Bézier controls.\n"); + geometry->u.path.state = D2D_GEOMETRY_STATE_ERROR; + return; + } + + /* FIXME: This tries to approximate a cubic Bézier with a quadratic one. */ p.x = (beziers[i].point1.x + beziers[i].point2.x) * 0.75f; p.y = (beziers[i].point1.y + beziers[i].point2.y) * 0.75f; p.x -= (figure->vertices[figure->vertex_count - 1].x + beziers[i].point3.x) * 0.25f; @@ -2667,8 +2692,8 @@ static void d2d_path_geometry_free_figures(struct d2d_geometry *geometry) for (i = 0; i < geometry->u.path.figure_count; ++i) { - heap_free(geometry->u.path.figures[i].bezier_controls); heap_free(geometry->u.path.figures[i].original_bezier_controls); + heap_free(geometry->u.path.figures[i].bezier_controls); heap_free(geometry->u.path.figures[i].vertices); } heap_free(geometry->u.path.figures); @@ -2937,7 +2962,6 @@ static HRESULT STDMETHODCALLTYPE d2d_geometry_sink_Close(ID2D1GeometrySink *ifac { struct d2d_geometry *geometry = impl_from_ID2D1GeometrySink(iface); HRESULT hr = E_FAIL; - size_t i; TRACE("iface %p.\n", iface); @@ -2949,15 +2973,6 @@ static HRESULT STDMETHODCALLTYPE d2d_geometry_sink_Close(ID2D1GeometrySink *ifac } geometry->u.path.state = D2D_GEOMETRY_STATE_CLOSED; - for (i = 0; i < geometry->u.path.figure_count; ++i) - { - struct d2d_figure *figure = &geometry->u.path.figures[i]; - size_t size = figure->bezier_control_count * sizeof(*figure->original_bezier_controls); - if (!(figure->original_bezier_controls = heap_alloc(size))) - goto done; - memcpy(figure->original_bezier_controls, figure->bezier_controls, size); - } - if (!d2d_geometry_intersect_self(geometry)) goto done; if (FAILED(hr = d2d_geometry_resolve_beziers(geometry))) @@ -3016,6 +3031,17 @@ static void STDMETHODCALLTYPE d2d_geometry_sink_AddQuadraticBeziers(ID2D1Geometr for (i = 0; i < bezier_count; ++i) { D2D1_RECT_F bezier_bounds; + D2D1_POINT_2F p[2]; + + /* Construct a cubic curve. */ + d2d_point_lerp(&p[0], &figure->vertices[figure->vertex_count - 1], &beziers[i].point1, 2.0f / 3.0f); + d2d_point_lerp(&p[1], &beziers[i].point2, &beziers[i].point1, 2.0f / 3.0f); + if (!d2d_figure_add_original_bezier_controls(figure, 2, p)) + { + ERR("Failed to add cubic Bézier controls.\n"); + geometry->u.path.state = D2D_GEOMETRY_STATE_ERROR; + return; + } d2d_rect_get_bezier_bounds(&bezier_bounds, &figure->vertices[figure->vertex_count - 1], &beziers[i].point1, &beziers[i].point2); @@ -3228,10 +3254,19 @@ static HRESULT STDMETHODCALLTYPE d2d_path_geometry_GetBounds(ID2D1PathGeometry * break; case D2D_VERTEX_TYPE_BEZIER: + /* FIXME: This attempts to approximate a cubic Bézier with + * a quadratic one. */ p1 = figure->original_bezier_controls[bezier_idx++]; d2d_point_transform(&p1, transform, p1.x, p1.y); + p2 = figure->original_bezier_controls[bezier_idx++]; + d2d_point_transform(&p2, transform, p2.x, p2.y); + p1.x = (p1.x + p2.x) * 0.75f; + p1.y = (p1.y + p2.y) * 0.75f; p2 = figure->vertices[j]; d2d_point_transform(&p2, transform, p2.x, p2.y); + p1.x -= (p.x + p2.x) * 0.25f; + p1.y -= (p.y + p2.y) * 0.25f; + d2d_rect_get_bezier_bounds(&bezier_bounds, &p, &p1, &p2); d2d_rect_union(bounds, &bezier_bounds); p = p2; @@ -3250,10 +3285,19 @@ static HRESULT STDMETHODCALLTYPE d2d_path_geometry_GetBounds(ID2D1PathGeometry * if (d2d_vertex_type_is_bezier(type)) { + /* FIXME: This attempts to approximate a cubic Bézier with + * a quadratic one. */ p1 = figure->original_bezier_controls[bezier_idx++]; d2d_point_transform(&p1, transform, p1.x, p1.y); + p2 = figure->original_bezier_controls[bezier_idx++]; + d2d_point_transform(&p2, transform, p2.x, p2.y); + p1.x = (p1.x + p2.x) * 0.75f; + p1.y = (p1.y + p2.y) * 0.75f; p2 = figure->vertices[0]; d2d_point_transform(&p2, transform, p2.x, p2.y); + p1.x -= (p.x + p2.x) * 0.25f; + p1.y -= (p.y + p2.y) * 0.25f; + d2d_rect_get_bezier_bounds(&bezier_bounds, &p, &p1, &p2); d2d_rect_union(bounds, &bezier_bounds); } @@ -3367,22 +3411,6 @@ static void d2d_geometry_flatten_cubic(ID2D1SimplifiedGeometrySink *sink, const ID2D1SimplifiedGeometrySink_SetSegmentFlags(sink, D2D1_PATH_SEGMENT_NONE); } -static void d2d_geometry_simplify_quadratic(ID2D1SimplifiedGeometrySink *sink, - D2D1_GEOMETRY_SIMPLIFICATION_OPTION option, const D2D1_POINT_2F *p0, - const D2D1_POINT_2F *p1, const D2D1_POINT_2F *p2, float tolerance) -{ - D2D1_BEZIER_SEGMENT b; - - d2d_point_lerp(&b.point1, p0, p1, 2.0f / 3.0f); - d2d_point_lerp(&b.point2, p2, p1, 2.0f / 3.0f); - b.point3 = *p2; - - if (option == D2D1_GEOMETRY_SIMPLIFICATION_OPTION_LINES) - d2d_geometry_flatten_cubic(sink, p0, &b, tolerance); - else - ID2D1SimplifiedGeometrySink_AddBeziers(sink, &b, 1); -} - static HRESULT STDMETHODCALLTYPE d2d_path_geometry_Simplify(ID2D1PathGeometry *iface, D2D1_GEOMETRY_SIMPLIFICATION_OPTION option, const D2D1_MATRIX_3X2_F *transform, float tolerance, ID2D1SimplifiedGeometrySink *sink) @@ -3391,8 +3419,9 @@ static HRESULT STDMETHODCALLTYPE d2d_path_geometry_Simplify(ID2D1PathGeometry *i enum d2d_vertex_type type = D2D_VERTEX_TYPE_NONE; unsigned int i, j, bezier_idx; D2D1_FIGURE_BEGIN begin; - D2D1_POINT_2F p, p1, p2; + D2D1_BEZIER_SEGMENT b; D2D1_FIGURE_END end; + D2D1_POINT_2F p; TRACE("iface %p, option %#x, transform %p, tolerance %.8e, sink %p.\n", iface, option, transform, tolerance, sink); @@ -3432,14 +3461,21 @@ static HRESULT STDMETHODCALLTYPE d2d_path_geometry_Simplify(ID2D1PathGeometry *i break; case D2D_VERTEX_TYPE_BEZIER: - p1 = figure->original_bezier_controls[bezier_idx++]; + b.point1 = figure->original_bezier_controls[bezier_idx++]; + b.point2 = figure->original_bezier_controls[bezier_idx++]; + b.point3 = figure->vertices[j]; if (transform) - d2d_point_transform(&p1, transform, p1.x, p1.y); - p2 = figure->vertices[j]; - if (transform) - d2d_point_transform(&p2, transform, p2.x, p2.y); - d2d_geometry_simplify_quadratic(sink, option, &p, &p1, &p2, tolerance); - p = p2; + { + d2d_point_transform(&b.point1, transform, b.point1.x, b.point1.y); + d2d_point_transform(&b.point2, transform, b.point2.x, b.point2.y); + d2d_point_transform(&b.point3, transform, b.point3.x, b.point3.y); + } + + if (option == D2D1_GEOMETRY_SIMPLIFICATION_OPTION_LINES) + d2d_geometry_flatten_cubic(sink, &p, &b, tolerance); + else + ID2D1SimplifiedGeometrySink_AddBeziers(sink, &b, 1); + p = b.point3; break; default: @@ -3456,13 +3492,20 @@ static HRESULT STDMETHODCALLTYPE d2d_path_geometry_Simplify(ID2D1PathGeometry *i if (d2d_vertex_type_is_bezier(type)) { - p1 = figure->original_bezier_controls[bezier_idx++]; + b.point1 = figure->original_bezier_controls[bezier_idx++]; + b.point2 = figure->original_bezier_controls[bezier_idx++]; + b.point3 = figure->vertices[0]; if (transform) - d2d_point_transform(&p1, transform, p1.x, p1.y); - p2 = figure->vertices[0]; - if (transform) - d2d_point_transform(&p2, transform, p2.x, p2.y); - d2d_geometry_simplify_quadratic(sink, option, &p, &p1, &p2, tolerance); + { + d2d_point_transform(&b.point1, transform, b.point1.x, b.point1.y); + d2d_point_transform(&b.point2, transform, b.point2.x, b.point2.y); + d2d_point_transform(&b.point3, transform, b.point3.x, b.point3.y); + } + + if (option == D2D1_GEOMETRY_SIMPLIFICATION_OPTION_LINES) + d2d_geometry_flatten_cubic(sink, &p, &b, tolerance); + else + ID2D1SimplifiedGeometrySink_AddBeziers(sink, &b, 1); } end = figure->flags & D2D_FIGURE_FLAG_CLOSED ? D2D1_FIGURE_END_CLOSED : D2D1_FIGURE_END_OPEN; -- 2.30.2

1 0

[PATCH] psapi/tests: Add more tests for working set watches.
by Paul Gofman 08 Dec '21

08 Dec '21

Signed-off-by: Paul Gofman <pgofman(a)codeweavers.com> --- dlls/psapi/tests/psapi_main.c | 156 ++++++++++++++++++++++++++++------ 1 file changed, 128 insertions(+), 28 deletions(-) diff --git a/dlls/psapi/tests/psapi_main.c b/dlls/psapi/tests/psapi_main.c index c4a740310a4..e383168fde1 100644 --- a/dlls/psapi/tests/psapi_main.c +++ b/dlls/psapi/tests/psapi_main.c @@ -55,7 +55,7 @@ static BOOL init_func_ptrs(void) return TRUE; } -static HANDLE hpSR, hpQI, hpVR, hpQV; +static HANDLE hpSR, hpQI, hpVR, hpQV, hp_vm_op; static const HANDLE hBad = (HANDLE)0xdeadbeef; static void test_EnumProcesses(void) @@ -693,14 +693,65 @@ static void test_GetModuleBaseName(void) "szModPath=\"%s\" szModBaseName=\"%s\"\n", szModPath, szModBaseName); } +static PSAPI_WS_WATCH_INFORMATION wswi[4096]; + +static void ws_get_watches(void) +{ + BOOL ret; + + SetLastError(0xdeadbeef); + ret = GetWsChanges(hpQI, wswi, sizeof(wswi)); + ok(ret == 1, "Got unexpected ret %u, error %u.\n", ret, GetLastError()); +} + +#define ws_watch_check_page(a, b, c, d) ws_watch_check_page_(__LINE__, a, b, c, d) +static void ws_watch_check_page_(unsigned int line, void *addr, void *pc_start, void *pc_end, BOOL expect) +{ + static const ULONG_PTR mask = ~(ULONG_PTR)0xfff; + unsigned int i; + + for(i = 0; wswi[i].FaultingVa; i++) + { + if (((ULONG_PTR)wswi[i].FaultingVa & mask) == ((ULONG_PTR)addr & mask)) + { + ok_(__FILE__, line)(expect, "Got unexpected FaultingVa %p.\n", wswi[i].FaultingVa); + if (expect) + { + ok_(__FILE__, line)((void *)wswi[i].FaultingVa == addr, "Got unexpected addr %p, expected %p.\n", + (void *)wswi[i].FaultingVa, addr); + } + ok_(__FILE__, line)(wswi[i].FaultingPc >= pc_start && wswi[i].FaultingPc < pc_end, + "Got unexpected FaultingPc %p, start %p.\n", wswi[i].FaultingPc, pc_start); + return; + } + } + ok_(__FILE__, line)(!expect, "Page not found.\n"); +} + static void test_ws_functions(void) { - PSAPI_WS_WATCH_INFORMATION wswi[4096]; + static const BOOL is_win32 = sizeof(void *) == sizeof(int); + static const unsigned int page_count = 16; + void *kernel_start, *kernel_end; + unsigned int value; HANDLE ws_handle; - char *addr; unsigned int i; + HANDLE file; + DWORD size; + char *addr; BOOL ret; + if (is_win32) + { + kernel_start = (void *)0x80000000; + kernel_end = (void *)0xffffffff; + } + else + { + kernel_start = (void *)0xffff000000000000; + kernel_end = (void *)0xffffffffffffffff; + } + ws_handle = OpenProcess(PROCESS_QUERY_INFORMATION | PROCESS_SET_QUOTA | PROCESS_SET_INFORMATION, FALSE, GetCurrentProcessId()); ok(!!ws_handle, "got error %u\n", GetLastError()); @@ -717,6 +768,10 @@ static void test_ws_functions(void) ret = EmptyWorkingSet(ws_handle); ok(ret == 1, "failed with %d\n", GetLastError()); + addr = VirtualAlloc(NULL, page_count * 0x1000, MEM_COMMIT, PAGE_READWRITE); + ok(!!addr, "VirtualAlloc failed, error %u.\n", GetLastError()); + addr[0x1002] = 0; + SetLastError( 0xdeadbeef ); ret = InitializeProcessForWsWatch( NULL ); todo_wine ok( !ret, "InitializeProcessForWsWatch succeeded\n" ); @@ -732,35 +787,77 @@ static void test_ws_functions(void) SetLastError(0xdeadbeef); ret = InitializeProcessForWsWatch(ws_handle); ok(ret == 1, "failed with %d\n", GetLastError()); - - addr = VirtualAlloc(NULL, 1, MEM_COMMIT, PAGE_READWRITE); - if(!addr) + + ret = GetWsChanges(hpQI, wswi, sizeof(wswi)); + todo_wine ok(ret == 1 || (!ret && GetLastError() == ERROR_NO_MORE_ITEMS), "failed with %d\n", GetLastError()); + if (!ret && GetLastError() != ERROR_NO_MORE_ITEMS) return; - *addr = 0; /* make sure it's paged in (needed on wow64) */ - if(!VirtualLock(addr, 1)) - { - trace("locking failed (error=%d) - skipping test\n", GetLastError()); - goto free_page; - } + file = CreateFileA("test.tmp", GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ, NULL, CREATE_ALWAYS, 0, NULL); + ok(file != INVALID_HANDLE_VALUE, "CreateFile failed, GetLastError() %u.\n", GetLastError()); + ws_get_watches(); + + ws_watch_check_page(addr + 0x1003, test_ws_functions, (char *)test_ws_functions + 0x10000, FALSE); + + *addr = 0; + addr[0x1002] = 0; + value = addr[0x2fff]; + ok(!value, "Got unexpected value %#x.\n", value); + + ret = ReadProcessMemory(hpVR, addr + 0x3002, &value, sizeof(value), NULL); + ok(ret, "Got unexpected ret %u, error %u.\n", ret, GetLastError()); + ret = WriteProcessMemory(hp_vm_op, addr + 0x4000, &value, 1, NULL); + ok(ret, "Got unexpected ret %u, error %u.\n", ret, GetLastError()); + + ret = WriteFile(file, addr + 0x5000, 1, &size, NULL); + ok(ret, "Got unexpected ret %u, error %u.\n", ret, GetLastError()); + + ret = ReadFile(file, addr + 0x6002, 2, &size, NULL); + ok(ret, "Got unexpected ret %u, error %u.\n", ret, GetLastError()); + ok(!size, "Got unexpected size %u.\n", size); + + ws_get_watches(); + ws_watch_check_page(addr + 1, test_ws_functions, (char *)test_ws_functions + 0x10000, TRUE); + /* Faulted before InitializeProcessForWsWatch(). */ + ws_watch_check_page(addr + 0x1003, NULL, NULL, FALSE); + ws_watch_check_page(addr + 0x2fff, test_ws_functions, (char *)test_ws_functions + 0x10000, TRUE); + ws_watch_check_page(addr + (is_win32 ? 0x3003 : 0x3005), kernel_start, kernel_end, !wow64); + ws_watch_check_page(addr + 0x4001, kernel_start, kernel_end, !wow64); + ws_watch_check_page(addr + 0x5001, kernel_start, kernel_end, !wow64); + ws_watch_check_page(addr + 0x6003, kernel_start, kernel_end, !wow64); + for (i = 7; i < page_count; ++i) + ws_watch_check_page(addr + 0x1000 * i, NULL, NULL, FALSE); + + ret = VirtualFree(addr, page_count * 0x1000, MEM_DECOMMIT); + ok(ret, "Got unexpected ret %u, error %u.\n", ret, GetLastError()); + + addr = VirtualAlloc(addr, page_count * 0x1000, MEM_COMMIT, PAGE_READWRITE); + ok(!!addr, "VirtualAlloc failed, error %u.\n", GetLastError()); + + *addr = 0; + addr[0x1000] = 1; + ws_get_watches(); + ws_watch_check_page(addr + 1, test_ws_functions, (char *)test_ws_functions + 0x10000, TRUE); + ws_watch_check_page(addr + 0x1001, test_ws_functions, (char *)test_ws_functions + 0x10000, TRUE); + for (i = 2; i < page_count; ++i) + ws_watch_check_page(addr + 0x1000 * i, NULL, NULL, FALSE); + + ret = VirtualLock(addr, 1); + ok(ret, "Got unexpected ret %u, error %u.\n", ret, GetLastError()); + + ret = EmptyWorkingSet(ws_handle); + ok(ret, "Got unexpected ret %u, error %u.\n", ret, GetLastError()); + *addr = 0; + addr[0x1000] = 1; + ws_get_watches(); + ws_watch_check_page(addr, NULL, NULL, FALSE); + ws_watch_check_page(addr + 0x1001, test_ws_functions, (char *)test_ws_functions + 0x10000, TRUE); + for (i = 2; i < page_count; ++i) + ws_watch_check_page(addr + 0x1000 * i, NULL, NULL, FALSE); - SetLastError(0xdeadbeef); - ret = GetWsChanges(hpQI, wswi, sizeof(wswi)); - todo_wine ok(ret == 1, "failed with %d\n", GetLastError()); - if(ret == 1) - { - for(i = 0; wswi[i].FaultingVa; i++) - if(((ULONG_PTR)wswi[i].FaultingVa & ~0xfffL) == (ULONG_PTR)addr) - { - todo_wine ok(ret == 1, "GetWsChanges found our page\n"); - goto free_page; - } - - todo_wine ok(0, "GetWsChanges didn't find our page\n"); - } - -free_page: VirtualFree(addr, 0, MEM_RELEASE); + CloseHandle(file); + DeleteFileA("test.tmp"); } static void check_QueryWorkingSetEx(PVOID addr, const char *desc, DWORD expected_valid, @@ -859,6 +956,9 @@ START_TEST(psapi_main) if (pIsWow64Process) IsWow64Process(GetCurrentProcess(), &wow64); + hp_vm_op = OpenProcess(PROCESS_VM_OPERATION | PROCESS_VM_WRITE, FALSE, pid); + ok(!!hp_vm_op, "got error %u\n", GetLastError()); + hpSR = OpenProcess(STANDARD_RIGHTS_REQUIRED, FALSE, pid); ok(!!hpSR, "got error %u\n", GetLastError()); hpQI = OpenProcess(PROCESS_QUERY_INFORMATION, FALSE, pid); -- 2.33.1

2 1

[PATCH] wsdapi: Add stub for WSDCreateDiscoveryProvider.
by Louis Lenders 08 Dec '21

08 Dec '21

https://bugs.winehq.org/show_bug.cgi?id=52173 Signed-off-by: Louis Lenders <xerox.xerox2000x(a)gmail.com> --- dlls/wsdapi/discovery.c | 7 +++++ dlls/wsdapi/wsdapi.spec | 2 +- include/wsddisco.idl | 60 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 68 insertions(+), 1 deletion(-) diff --git a/dlls/wsdapi/discovery.c b/dlls/wsdapi/discovery.c index fcbdfef2ab2..502e5f016e6 100644 --- a/dlls/wsdapi/discovery.c +++ b/dlls/wsdapi/discovery.c @@ -470,3 +470,10 @@ HRESULT WINAPI WSDCreateDiscoveryPublisher(IWSDXMLContext *pContext, IWSDiscover return S_OK; } + +HRESULT WINAPI WSDCreateDiscoveryProvider(IWSDXMLContext *context, IWSDiscoveryProvider **provider) +{ + FIXME("(%p, %p) stub\n", context, provider); + + return E_NOTIMPL; +} \ No newline at end of file diff --git a/dlls/wsdapi/wsdapi.spec b/dlls/wsdapi/wsdapi.spec index 95ee072a1cf..d7465458dd5 100644 --- a/dlls/wsdapi/wsdapi.spec +++ b/dlls/wsdapi/wsdapi.spec @@ -15,7 +15,7 @@ @ stub WSDCreateDeviceProxy @ stub WSDCreateDeviceProxyAdvanced @ stub WSDCreateDiscoveryProvider2 -@ stub WSDCreateDiscoveryProvider +@ stdcall WSDCreateDiscoveryProvider(ptr ptr) @ stub WSDCreateDiscoveryPublisher2 @ stdcall WSDCreateDiscoveryPublisher(ptr ptr) @ stub WSDCreateHttpAddress diff --git a/include/wsddisco.idl b/include/wsddisco.idl index 50d2198cea7..74bb3e250c1 100644 --- a/include/wsddisco.idl +++ b/include/wsddisco.idl @@ -24,6 +24,9 @@ interface IWSDScopeMatchingRule; interface IWSDiscoveryPublisherNotify; interface IWSDiscoveryPublisher; interface IWSDXMLContext; +interface IWSDiscoveryProvider; +interface IWSDiscoveryProviderNotify; +interface IWSDiscoveredService; [ uuid(fcafe424-fef5-481a-bd9f-33ce0574256f), @@ -38,6 +41,62 @@ interface IWSDScopeMatchingRule : IUnknown HRESULT MatchScopes([in] LPCWSTR pszScope1, [in] LPCWSTR pszScope2, [out] BOOL *pfMatch); } +[ +uuid(73ee3ced-b6e6-4329-a546-3e8ad46563d2), +object, +local, +restricted, +pointer_default(unique) +] +interface IWSDiscoveryProviderNotify : IUnknown +{ + HRESULT Add([in] IWSDiscoveredService *service); + HRESULT Remove([in] IWSDiscoveredService *service); + HRESULT SearchFailed([in] HRESULT hr,[in, optional] LPCWSTR tag); + HRESULT SearchComplete([in, optional] LPCWSTR tag); +} + +[ +uuid(4bad8a3b-b374-4420-9632-aac945b374aa), +object, +local, +restricted, +pointer_default(unique) +] +interface IWSDiscoveredService : IUnknown +{ + HRESULT GetEndpointReference([out] WSD_ENDPOINT_REFERENCE **endpoint_reference); + HRESULT GetTypes([out] WSD_NAME_LIST **types_list); + HRESULT GetScopes([out] WSD_URI_LIST **scopes_list); + HRESULT GetXAddrs([out] WSD_URI_LIST **x_addrs_list); + HRESULT GetMetadataVersion([out] ULONGLONG *metadata_version); + HRESULT GetExtendedDiscoXML([out] WSDXML_ELEMENT **header_any,[out] WSDXML_ELEMENT **body_any); + HRESULT GetProbeResolveTag([out] LPCWSTR *tag); + HRESULT GetRemoteTransportAddress([out] LPCWSTR *remote_transport_address); + HRESULT GetLocalTransportAddress([out] LPCWSTR *local_transport_address); + HRESULT GetLocalInterfaceGUID([out] GUID *guid); + HRESULT GetInstanceId([out] ULONGLONG *instance_id); +} + +[ +uuid (8ffc8e55-f0eb-480f-88b7-b435dd281d45), +object, +local, +restricted, +pointer_default(unique) +] +interface IWSDiscoveryProvider : IUnknown +{ + HRESULT SetAddressFamily([in] DWORD address_family); + HRESULT Attach([in] IWSDiscoveryProviderNotify *sink); + HRESULT Detach(void); + HRESULT SearchById([in] LPCWSTR id,[in, optional] LPCWSTR tag); + HRESULT SearchByAddress([in] LPCWSTR address,[in, optional] LPCWSTR tag); + HRESULT SearchByType([in, optional] const WSD_NAME_LIST *types_list, \ + [in, optional] const WSD_URI_LIST *scopes_list,[in, optional] LPCWSTR match_by,[in, optional] LPCWSTR tag); + HRESULT GetXMLContext([out] IWSDXMLContext **context); +} + [ uuid(e67651b0-337a-4b3c-9758-733388568251), object, @@ -104,4 +163,5 @@ interface IWSDiscoveryPublisher : IUnknown HRESULT GetXMLContext([out] IWSDXMLContext **ppContext); } +cpp_quote("HRESULT WINAPI WSDCreateDiscoveryProvider(IWSDXMLContext *context, IWSDiscoveryProvider **provider);") cpp_quote("HRESULT WINAPI WSDCreateDiscoveryPublisher(IWSDXMLContext* pContext, IWSDiscoveryPublisher **ppPublisher);") -- 2.34.1

2 1

[PATCH] msxml3: Add GBK support for builtin character converter.
by Jactry Zeng 08 Dec '21

08 Dec '21

Signed-off-by: Jactry Zeng <jzeng(a)codeweavers.com> --- dlls/msxml3/main.c | 11 ++++++ dlls/msxml3/tests/domdoc.c | 80 +++++++++++++++++++++++++++++--------- 2 files changed, 73 insertions(+), 18 deletions(-) diff --git a/dlls/msxml3/main.c b/dlls/msxml3/main.c index ba8d3b2e21b..2a97f2637f1 100644 --- a/dlls/msxml3/main.c +++ b/dlls/msxml3/main.c @@ -202,6 +202,16 @@ done: return len; } +static int gbk_to_utf8(unsigned char *out, int *outlen, const unsigned char *in, int *inlen) +{ + return to_utf8(936, out, outlen, in, inlen); +} + +static int utf8_to_gbk(unsigned char *out, int *outlen, const unsigned char *in, int *inlen) +{ + return from_utf8(936, out, outlen, in, inlen); +} + static int win1250_to_utf8(unsigned char *out, int *outlen, const unsigned char *in, int *inlen) { return to_utf8(1250, out, outlen, in, inlen); @@ -300,6 +310,7 @@ static void init_char_encoders(void) xmlCharEncodingOutputFunc output; } encoder[] = { + { "gbk", gbk_to_utf8, utf8_to_gbk }, { "windows-1250", win1250_to_utf8, utf8_to_win1250 }, { "windows-1251", win1251_to_utf8, utf8_to_win1251 }, { "windows-1252", win1252_to_utf8, utf8_to_win1252 }, diff --git a/dlls/msxml3/tests/domdoc.c b/dlls/msxml3/tests/domdoc.c index 70e2da89a2f..e931c683fb8 100644 --- a/dlls/msxml3/tests/domdoc.c +++ b/dlls/msxml3/tests/domdoc.c @@ -781,6 +781,20 @@ static const char complete7[] = { "</root>" }; +#define DECL_GBK \ +"<?xml version=\"1.0\" encoding=\"gbk\"?>" + +static const char gbkxml[] = +DECL_GBK +"<open></open>"; + +#define DECL_WIN_936 \ +"<?xml version=\"1.0\" encoding=\"Windows-936\"?>" + +static const char win936xml[] = +DECL_WIN_936 +"<open></open>"; + #define DECL_WIN_1252 \ "<?xml version=\"1.0\" encoding=\"Windows-1252\"?>" @@ -10506,7 +10520,10 @@ static void write_to_file(const char *name, const char *data) CloseHandle(hfile); } -static void test_doc_load_from_path(IXMLDOMDocument *doc, const char *path) +#define TEST_DOC_LOAD_FROM_PATH(doc,path,expected_hr, expected_ret) \ + _test_doc_load_from_path(doc, path, expected_hr, expected_ret, __LINE__) +static void _test_doc_load_from_path(IXMLDOMDocument *doc, const char *path, + HRESULT expected_hr, VARIANT_BOOL expected_ret, int line) { IXMLDOMDocument *doc2; IXMLDOMElement *elem; @@ -10520,29 +10537,32 @@ static void test_doc_load_from_path(IXMLDOMDocument *doc, const char *path) V_VT(&src) = VT_BSTR; V_BSTR(&src) = url; hr = IXMLDOMDocument_load(doc, src, &b); - ok(hr == S_OK, "Failed to load document, %#x.\n", hr); - ok(b == VARIANT_TRUE, "got %d\n", b); + ok_(__FILE__, line)(hr == expected_hr, "Failed to load document, %#x.\n", hr); + ok_(__FILE__, line)(b == expected_ret, "got %d\n", b); V_VT(&src) = VT_BSTR | VT_BYREF; V_BSTRREF(&src) = &url; hr = IXMLDOMDocument_load(doc, src, &b); - ok(hr == S_OK, "Failed to load document, %#x.\n", hr); - ok(b == VARIANT_TRUE, "got %d\n", b); + ok_(__FILE__, line)(hr == expected_hr, "Failed to load document, %#x.\n", hr); + ok_(__FILE__, line)(b == expected_ret, "got %d\n", b); + + if (expected_hr != S_OK) + return; url = NULL; hr = IXMLDOMDocument_get_url(doc, &url); - ok(hr == S_OK, "Failed to get document url, hr %#x.\n", hr); + ok_(__FILE__, line)(hr == S_OK, "Failed to get document url, hr %#x.\n", hr); hr = IXMLDOMDocument_get_documentElement(doc, &elem); - ok(hr == S_OK, "got 0x%08x\n", hr); + ok_(__FILE__, line)(hr == S_OK, "got 0x%08x\n", hr); /* Create another instance for the same document, check url */ hr = IXMLDOMElement_get_ownerDocument(elem, &doc2); - ok(hr == S_OK, "Failed to get owner document, hr %#x.\n", hr); + ok_(__FILE__, line)(hr == S_OK, "Failed to get owner document, hr %#x.\n", hr); hr = IXMLDOMDocument_get_url(doc2, &url2); - ok(hr == S_OK, "Failed to get document url, hr %#x.\n", hr); - ok(!lstrcmpW(url, url2), "Unexpected url %s.\n", wine_dbgstr_w(url2)); + ok_(__FILE__, line)(hr == S_OK, "Failed to get document url, hr %#x.\n", hr); + ok_(__FILE__, line)(!lstrcmpW(url, url2), "Unexpected url %s.\n", wine_dbgstr_w(url2)); IXMLDOMDocument_Release(doc2); IXMLDOMElement_Release(elem); @@ -10574,6 +10594,18 @@ static void test_load(void) HRESULT hr; void* ptr; int n; + struct encoding_test + { + const char *xml; + HRESULT expected_hr; + VARIANT_BOOL expected_ret; + } encoding_tests[] = + { + { gbkxml, S_OK, VARIANT_TRUE }, + { win1252xml, S_OK, VARIANT_TRUE }, + { win936xml, S_FALSE, VARIANT_FALSE }, + }; + GetTempPathA(MAX_PATH, path); strcat(path, "winetest.xml"); @@ -10593,23 +10625,23 @@ static void test_load(void) /* "file://" url */ strcpy(path2, "file://"); strcat(path2, path); - test_doc_load_from_path(doc, path2); + TEST_DOC_LOAD_FROM_PATH(doc, path2, S_OK, VARIANT_TRUE); /* file:// url, forward slashes */ url_forward_slash(path2); - test_doc_load_from_path(doc, path2); + TEST_DOC_LOAD_FROM_PATH(doc, path2, S_OK, VARIANT_TRUE); /* "file:/" url */ strcpy(path2, "file:/"); strcat(path2, path); - test_doc_load_from_path(doc, path); + TEST_DOC_LOAD_FROM_PATH(doc, path, S_OK, VARIANT_TRUE); /* file:/ with forward slashes. */ url_forward_slash(path2); - test_doc_load_from_path(doc, path2); + TEST_DOC_LOAD_FROM_PATH(doc, path2, S_OK, VARIANT_TRUE); /* Regular local path. */ - test_doc_load_from_path(doc, path); + TEST_DOC_LOAD_FROM_PATH(doc, path, S_OK, VARIANT_TRUE); /* load from a path: VT_BSTR|VT_BYREF, null ptr */ V_VT(&src) = VT_BSTR | VT_BYREF; @@ -10627,16 +10659,16 @@ static void test_load(void) strcpy(path2, path); n = strlen(path2); strcpy(&path2[n-1], "%6C"); /* C:\path\to\winetest.xm%6C */ - test_doc_load_from_path(doc, path2); + TEST_DOC_LOAD_FROM_PATH(doc, path2, S_OK, VARIANT_TRUE); /* Both spaces and %20s work. */ GetTempPathA(MAX_PATH, path2); strcat(path2, "wine test.xml"); write_to_file(path2, win1252xml); - test_doc_load_from_path(doc, path2); + TEST_DOC_LOAD_FROM_PATH(doc, path2, S_OK, VARIANT_TRUE); GetTempPathA(MAX_PATH, path2); strcat(path2, "wine%20test.xml"); - test_doc_load_from_path(doc, path2); + TEST_DOC_LOAD_FROM_PATH(doc, path2, S_OK, VARIANT_TRUE); DeleteFileA(path2); DeleteFileA(path); @@ -10771,6 +10803,18 @@ static void test_load(void) IXMLDOMDocument_Release(doc); + /* Encoding tests. */ + for (n = 0; n < ARRAY_SIZE(encoding_tests); n++) + { + GetTempPathA(MAX_PATH, path); + strcat(path, "codepage_test.xml"); + write_to_file(path, encoding_tests[n].xml); + doc = create_document(&IID_IXMLDOMDocument); + TEST_DOC_LOAD_FROM_PATH(doc, path, encoding_tests[n].expected_hr, encoding_tests[n].expected_ret); + DeleteFileA(path); + IXMLDOMDocument_Release(doc); + } + free_bstrs(); } -- 2.33.0

2 1