October 2008 - Wine-Bugs - list.winehq.org

[Bug 12730] New: gdi32: some tests fail when X is run in 16 bit mode, but not 32 bit
by wine-bugs＠winehq.org Jan. 27, 2012

Jan. 27, 2012

http://bugs.winehq.org/show_bug.cgi?id=12730 Summary: gdi32: some tests fail when X is run in 16 bit mode, but not 32 bit Product: Wine Version: CVS/GIT Platform: PC OS/Version: Linux Status: NEW Keywords: source, testcase Severity: minor Priority: P2 Component: gdi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: austinenglish(a)gmail.com Created an attachment (id=12382) --> (http://bugs.winehq.org/attachment.cgi?id=12382) +gdi trace in git +make[2]: *** [bitmap.ok] Error 2 +make[2]: *** [font.ok] Error 2 +make[2]: *** [palette.ok] Error 3 +make[2]: Target `test' not remade because of errors. +make[1]: *** [gdi32/tests/__test__] Error 2 Tried running make -k test with X in 16 bit mode. Surprisingly, all the graphics tests still passed (more likely skipped, didn't check). However, gdi32 is fishy and not skipping, but instead failing. +gdi log attached -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 14

[Bug 15237] New: After install of Mathematica 6, incorrect font in other programms
by wine-bugs＠winehq.org Jan. 27, 2012

Jan. 27, 2012

http://bugs.winehq.org/show_bug.cgi?id=15237 Summary: After install of Mathematica 6, incorrect font in other programms Product: Wine Version: 1.1.4 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: neptunia(a)mail.ru Created an attachment (id=16010) --> (http://bugs.winehq.org/attachment.cgi?id=16010) screenshot After installing Mathematica 6 under Wine, in other programs fonts sometimes displayed incorrectly. See the screenshots. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 16

[Bug 13769] New: Extreme graphical glitches with Sim City 4 Deluxe harwdare rendering mode
by wine-bugs＠winehq.org Jan. 27, 2012

Jan. 27, 2012

http://bugs.winehq.org/show_bug.cgi?id=13769 Summary: Extreme graphical glitches with Sim City 4 Deluxe harwdare rendering mode Product: Wine Version: 1.0-rc4 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: authentec(a)gmail.com Created an attachment (id=13804) --> (http://bugs.winehq.org/attachment.cgi?id=13804) Whiteness in Sim City 4 Deluxe city view Sim City 4 installs and runs in software rendering mode but has severe graphical glitches in hardware rendering mode. In hardware mode fog/smoke is rendered in a blocky manner and the entire terrain is white so it is very difficult to distinguish anything. In addition, rendering performance is very slow in hardware mode. In software mode the game is very responsive. I have encountered this problem in release candidates 1-4. I was unable to install it at all using one of the 9.5x versions so overall there has been improvement. I have attached a screenshot of the city view which is most affected by the glitch. The cityscape is supposed to be mostly green and brown. Region view has blocky fog but no whiteness. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 22

[Bug 13801] New: Very slow text rendering in AutoCAD
by wine-bugs＠winehq.org Jan. 27, 2012

Jan. 27, 2012

http://bugs.winehq.org/show_bug.cgi?id=13801 Summary: Very slow text rendering in AutoCAD Product: Wine Version: 1.0-rc4 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: max(a)veneto.com Tested on AutoCAD 2005 and AutoCAD 2008, after installation following http://bugs.winehq.org/show_bug.cgi?id=13799 guidelines. Working on a drawing with many texts/quotes zooms/scrolls/pans becomes painfully slow. Bug concerns just texts, NOT images or other drawing elements. I suppose is a performance problem on gdi, but not sure about. Ciao Max -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 54

[Bug 10636] New: simcity 4 D3D 0.9.50 REGRESSION from 0.9.49
by wine-bugs＠winehq.org Jan. 27, 2012

Jan. 27, 2012

http://bugs.winehq.org/show_bug.cgi?id=10636 Summary: simcity 4 D3D 0.9.50 REGRESSION from 0.9.49 Product: Wine Version: 0.9.50. Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: wine-directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: mizvekov(a)gmail.com On 0.9.49, simcity 4 runs almost flawlessly. On 0.9.50, it becomes unplayable because the 3d objects become invisible, and only sometimes they flicker back visibly, but just for an instant. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 60

[Bug 12283] New: Source Insight does not refresh the screen
by wine-bugs＠winehq.org Jan. 23, 2012

Jan. 23, 2012

http://bugs.winehq.org/show_bug.cgi?id=12283 Summary: Source Insight does not refresh the screen Product: Wine Version: 0.9.58. Platform: Other OS/Version: other Status: NEW Keywords: download, regression Severity: normal Priority: P2 Component: winex11.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: scott(a)open-vote.org >From Launchpad: https://bugs.edge.launchpad.net/ubuntu/+source/wine/+bug/208853 I have installed Source Insight, v3.50.0058 (http://www.sourceinsight.com) under Wine (0.9.58-0ubuntu2) under Hardy Beta. Source Insight is a code editor and browser. You can install a time-limited copy if you want. Anyway, having used this under Wine under Ubuntu for 18 months, with only a couple of niggly problems, I decided to upgrade (by doing a wipe + fresh install) to Hardy Beta. Since then, Source Insight has exhibited major problems. These all centre around NOT refreshing the screen after things happen: (1) Opening a new source-file window and moving it. Also resizing an existing window. (2) Minimising and then maximising the Source Insight window itself. In both cases, the screen inside the Source Insight window does not refresh. Moving the window around the screen does nothing (except get a nice swirly pattern of a repeating window title-bar inside the window itself. The only way I have found to cure the problem and make the window refresh itself is to switch to the second workspace, wait a few seconds (until the window with the "Go to left workspace ..." pops up) and then switch back. THEN the window refreshes. Sometimes. If it does not, switch to the other workspace again and wait longer before switching back. This is on a Dell D620 with an nVidia "G72M [Quadro NVS 110M/GeForce Go 7300]" and a second Dell 2007FP display attached. I'm running the graphics in TwinView mode (which means a manually configured xorg.conf, attached [see launchpad]). Going to System -> Preferences -> Appearance -> Visual Effects shows that "None" is currently active. --- The problem seems a LOT worse when running with the two displays and with the Source Insight window on the second (non-laptop) display. When running in single-display mode (i.e. at home instead of work), the "new source file window" problem does not seem to occur so much. The "minimising/maximising" problem occurs all the time, whatever the display being used. --- I believe the last version this worked with for this user was 0.9.46 (the one that came with Ubuntu Gutsy). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 33

[Bug 15519] New: Soldier of Fortune 2
by wine-bugs＠winehq.org Jan. 23, 2012

Jan. 23, 2012

http://bugs.winehq.org/show_bug.cgi?id=15519 Summary: Soldier of Fortune 2 Product: Wine Version: 1.0.0 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: christian_obst(a)gmx.de Does not get past the intro when starting the game. Instead, it falls back to the console that is shown in the beginning, complaining: FS_FOpenFileRead: name has a space (fonts/Creating STM %s... .fontdat) Note: this error message is generated by the game itself, not by wine. It is printed in "Soldier of Fortune 2 Console". -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 13839] New: Steam hangs in SteamStartup() attempting to connect to servers
by wine-bugs＠winehq.org Jan. 23, 2012

Jan. 23, 2012

http://bugs.winehq.org/show_bug.cgi?id=13839 Summary: Steam hangs in SteamStartup() attempting to connect to servers Product: Wine Version: 1.0-rc4 Platform: All OS/Version: Solaris Status: UNCONFIRMED Severity: normal Priority: P2 Component: winsock AssignedTo: wine-bugs(a)winehq.org ReportedBy: trisk+winehq(a)acm.jhu.edu Created an attachment (id=13899) --> (http://bugs.winehq.org/attachment.cgi?id=13899) Gzipped output of WINEDEBUG=trace+relay wine Steam.exe Running Steam results in strange behaviour on Solaris and OpenSolaris. When Steam is first installed (using either the current MSI installer or an older standalone installer), it successfully updates itself and automatically restarts. , On restart, it spews extensive messages to the console about connection attempts to all 100+ CSDS servers with latency. For example, the last couple of lines are: CellID: Connecting to 87.248.209.212:27031. . . CellID: Connect to 87.248.209.212:27031 took 110 MS CellID: !! Got Cell ID 2 from server 69.28.153.90:27031 It then makes no further progress and appears to hang. If interrupted with Ctrl-C, it displays a "SteamStartup() failed" messagebox before exiting. When started again, Steam.exe prints set of "CellID:" messages showing that is is connecting to a particular server, then blocks for at least a minute, then connects to a different server. This goes on indefinitely. I'm attaching a WINEDEBUG=trace+relay log (to reduce log size, this Steam instance was interrupted after about 30 seconds). I can't do WINEDEBUG=trace+all because it results in an error message from Steam about being unable to load SteamUI.dll. This seems to be a network related issue, but I'm not entirely certain. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 17

[Bug 15431] New: Problem with several Xservers
by wine-bugs＠winehq.org Jan. 23, 2012

Jan. 23, 2012

http://bugs.winehq.org/show_bug.cgi?id=15431 Summary: Problem with several Xservers Product: Wine Version: CVS/GIT Platform: Other OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: lich(a)math.spbu.ru Created an attachment (id=16294) --> (http://bugs.winehq.org/attachment.cgi?id=16294) screenshot I have several Xservers with different geometry: :0 - real Xorg server - 1280x1024 :1 - vnc server (or Xnest) - 1024x768 If I run any wine app first time in smaller X (:1) and then on bigger X (:0), it gets corrupted outside 1024x768 region - exactly the size of smaller X. If I use wine virtual desktop feature (X server does not matter), this bug does not appear. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 11

[Bug 15682] New: Naviter Seeyou ignores 'Register' button
by wine-bugs＠winehq.org Jan. 23, 2012

Jan. 23, 2012

http://bugs.winehq.org/show_bug.cgi?id=15682 Summary: Naviter Seeyou ignores 'Register' button Product: Wine Version: 1.1.6 Platform: Other URL: http://www.naviter.si/products/seeyou.php?Itemid=213 OS/Version: other Status: NEW Keywords: download Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com A user complained in the appdb that he could not register Naviter SeeYou, so I gave it a try. To register, you have to do Help / Register, type in your key, and click the Register button. Sure enough, clicking that button seems to do nothing. Annoyingly, the app's main menu was detached when I ran it, and the floating main menu was behind all the windows. So if you can't find the Help menu, try closing the app's inner windows. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 4