November 2008 - Wine-Bugs - list.winehq.org

[Bug 16083] New: Unhandled page fault - fixme:dbghelp:addr_to_linear Failed to linearize address
by wine-bugs＠winehq.org Sept. 9, 2015

Sept. 9, 2015

http://bugs.winehq.org/show_bug.cgi?id=16083 Summary: Unhandled page fault - fixme:dbghelp:addr_to_linear Failed to linearize address Product: Wine Version: 1.1.5 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: nicofo(a)tuxfamily.org Created an attachment (id=17309) --> (http://bugs.winehq.org/attachment.cgi?id=17309) Wine "Unhandled page fault" Hello, I try to run an old program for Windows: Eurodico (a translator dictionnary) But I got that error: (see attachement for complete logs) Seems to be a bug: wine: Unhandled page fault on read access to 0xffffffff at address 0x127f:0x00004a73 (thread 0019), starting debugger... Unhandled exception: page fault on read access to 0xffffffff in 16-bit code (127f:4a73). fixme:dbghelp:addr_to_linear Failed to linearize address 0111:0000ef00 (mode 0) ... (see log) Additional info: I'm under Linux Fedora 9 with "wine-1.1.5-1.fc9.i386", but I have never been able to run that program before with previous version of wine (0.9 and even older). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 19

[Bug 11387] New: SMP/Dual core performing worse than single core
by wine-bugs＠winehq.org Sept. 9, 2015

Sept. 9, 2015

http://bugs.winehq.org/show_bug.cgi?id=11387 Summary: SMP/Dual core performing worse than single core Product: Wine Version: 0.9.54. Platform: Other OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: jcollins(a)asgardsrealm.net I searched for another bug report on this but did not find anything. I've tested the same application on two similar systems with similar software loads. Essentially, the application (Majesty) preforms considerably better on a single core system than it does on a more powerful dual core system. Single Core System: AMD Athlon(tm) 64 Processor 3300+ 1.5 Gig RAM GeForce 6200 256M Dual Core System: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ 2 Gig RAM GeForce 7800 256M Both systems are running Debian Etch, with kernel version 2.6.18-5-k7, NVIDIA GLX Module 100.14.19, and Wine 0.9.53 (using Scott's packages). I would expect the dual core system to run as well, if not better, than the single core system. However, it is extremely sluggish on the dual core system and blazingly fast (in some cases needing to be slowed down) on the single core. I have also tested the dual core system with 0.9.54 (built using Scott's 0.9.53 package as a basis), with no improvement. I'll happily provide any additional information that would be helpful. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 18

[Bug 14055] New: Occasional wine crash during Heroes of Might and Magic III gameplay
by wine-bugs＠winehq.org Sept. 9, 2015

Sept. 9, 2015

http://bugs.winehq.org/show_bug.cgi?id=14055 Summary: Occasional wine crash during Heroes of Might and Magic III gameplay Product: Wine Version: 1.0.0 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: riklaunim(a)gmail.com Created an attachment (id=14275) --> (http://bugs.winehq.org/attachment.cgi?id=14275) Crash log During gameplay the game may sometimes crash. It looks like the bug is related to mp3/sound – “mp3dec.asi” (using OOS in wine). The log shows the backtrace. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 72

[Bug 15689] New: Onenote 2007: no drawing.
by wine-bugs＠winehq.org Sept. 9, 2015

Sept. 9, 2015

http://bugs.winehq.org/show_bug.cgi?id=15689 Summary: Onenote 2007: no drawing. Product: Wine Version: 1.1.6 Platform: All OS/Version: All Status: UNCONFIRMED Severity: minor Priority: P2 Component: ole AssignedTo: wine-bugs(a)winehq.org ReportedBy: Crazedhamster(a)hotmail.com Created an attachment (id=16752) --> (http://bugs.winehq.org/attachment.cgi?id=16752) Backtrace Clicking on the drawing tool causes it to go grey and disappear. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 12804] New: winecfg: pressing enter in library override closes winecfg
by wine-bugs＠winehq.org Sept. 9, 2015

Sept. 9, 2015

http://bugs.winehq.org/show_bug.cgi?id=12804 Summary: winecfg: pressing enter in library override closes winecfg Product: Wine Version: 0.9.60 Platform: PC OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: programs AssignedTo: wine-bugs(a)winehq.org ReportedBy: austinenglish(a)gmail.com CC: jeffzaroyko(a)gmail.com Pressing enter when entering a dll override doesn't add the override. For those of us that find mice an exercise in masochism and prefer keyboards, it's quite a pain... -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 39

[Bug 9848] New: flipviewer fails to load
by wine-bugs＠winehq.org Sept. 4, 2015

Sept. 4, 2015

http://bugs.winehq.org/show_bug.cgi?id=9848 Summary: flipviewer fails to load Product: Wine Version: 0.9.46. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P3 Component: wine-advapi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: eyecreate(a)gmail.com Created an attachment (id=8321) --> (http://bugs.winehq.org/attachment.cgi?id=8321) Error log for flipviewer The flipviewer(www.flipviewer.com) app installs and the library program works, but the actual program fails. Backtrace log attached. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 15

[Bug 14915] New: FlushFileBuffers() fails on disk volume, sets ERROR_INVALID_HANDLE when handle supposedly valid
by wine-bugs＠winehq.org Sept. 4, 2015

Sept. 4, 2015

http://bugs.winehq.org/show_bug.cgi?id=14915 Summary: FlushFileBuffers() fails on disk volume, sets ERROR_INVALID_HANDLE when handle supposedly valid Product: Wine Version: 1.1.2 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: vesselinpeev(a)hotmail.com Ran under Wine, the following program receives ERROR_INVALID_HANDLE as a Windows last error when the flushing call fails. Note that if you are testing under Windows Vista, you need to run the program with administrative privileges to be able to get the handle to the volume. For brevity, I've omitted GetLastError() printing for failure cases except the flushing one, but, needless to say, you may want to add them for full correctness / error handling / safety, or do let me know and I'll happily add these and re-post the code. # include <windows.h> # include <stdio.h> # include <tchar.h> int _tmain() { LPCTSTR volName = _T("\\\\.\\C:"); HANDLE hFile = CreateFile(volName, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, 0, OPEN_EXISTING, 0, 0); if (hFile != INVALID_HANDLE_VALUE) { _tprintf(_T("Opened volume %s\n"), volName); SetLastError(0xdeadbeef); /* to make sure that it's really the next call that sets the last error -- advice taken from Dmitry Timoshkov's comment at http://bugs.winehq.org/show_bug.cgi?id=14855 */ if (FlushFileBuffers(hFile)) { _tprintf(_T("File buffers flushed\n")); } else { DWORD dwRet = GetLastError(); _ftprintf(stderr, _T("File buffers not flushed, GetLastError() returned %lu"), dwRet); if(dwRet == ERROR_INVALID_HANDLE) { _ftprintf(stderr, _T(" (\"The handle is invalid\")")); } _ftprintf(stderr, ".\n"); } } else { _ftprintf(stderr, _T("Could not open volume %s\n"), volName); return -2; } if(! CloseHandle(hFile)) { _ftprintf(stderr, _T("Could not close handle to volume %s\n"), volName); return -3; } return 0; } -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 17

[Bug 12454] New: iriver plus 3 doesn't start
by wine-bugs＠winehq.org Aug. 21, 2015

Aug. 21, 2015

http://bugs.winehq.org/show_bug.cgi?id=12454 Summary: iriver plus 3 doesn't start Product: Wine Version: 0.9.58. Platform: PC URL: http://www.iriver.com/plus/ OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: hewus.owns(a)gmail.com iriver plus 3 installs, but does not start. I added mfc42u.dll to get rid of missing dll messages, but it now ends here (0.9.59): err:module:attach_process_dlls "iDeviceM.dll" failed to initialize, aborting err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program Files\\iriver\\iriver plus 3\\iPlus3.exe" failed, status c0000142 I tried yesterday on 0.9.58 and got this: err:module:LdrInitializeThunk "iDeviceM.dll" failed to initialize, aborting err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program Files\\iriver\\iriver plus 3\\iPlus3.exe" failed, status c0000142 The errors are slightly different, if that helps at all. I am able to provide more debugging if required. Free download: http://www.iriver.com.au/iriver/uploads/software/iplus3_setup_full.zip -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 27

[Bug 13759] New: Cannot create a new account with Titan Poker
by wine-bugs＠winehq.org Aug. 9, 2015

Aug. 9, 2015

http://bugs.winehq.org/show_bug.cgi?id=13759 Summary: Cannot create a new account with Titan Poker Product: Wine Version: 1.0-rc3 Platform: Other OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: JohannesBauer(a)gmx.de When using Wine and Titan Poker, no new account can be created. Instead Wine hangs at the "New Account Registration" screen - screenshot attached. I bet this is some tivial thing... but Titan Poker becomes unusable for new users when you're unable to register. I've also tried 0.9.48 before (upgraded to 1.0-rc3 because I thought maybe there the bug was fixed) - same thing. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 14935] New: Final Fantasy 7 exits on start with no error messages
by wine-bugs＠winehq.org Aug. 8, 2015

Aug. 8, 2015

http://bugs.winehq.org/show_bug.cgi?id=14935 Summary: Final Fantasy 7 exits on start with no error messages Product: Wine Version: 1.1.0 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: ryan.reich(a)gmail.com Created an attachment (id=15519) --> (http://bugs.winehq.org/attachment.cgi?id=15519) Console and debug output Final Fantasy 7 (original CD, unpatched) installs fine, but when run, exits before even displaying a start screen: the Wine desktop opens and then, a second later, closes. No message boxes, no error messages on the console aside from a few fixme's. Attached is a portion of the WINEDEBUG=+relay log leading up to a call of ExitProcess(); the only error I can detect is that ShowCursor failed. My question is WHY, and what improvement in wine it requires to succeed. Seems similar to bug #13388, except that nowhere can I find mention of KeInitializeMutex. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 19