May 2011 - Wine-Bugs - list.winehq.org

[Bug 19595] New: Sony Ericsson PC Suite 5's installer does not draw unless run in a virtual desktop
by wine-bugs＠winehq.org March 24, 2013

March 24, 2013

http://bugs.winehq.org/show_bug.cgi?id=19595 Summary: Sony Ericsson PC Suite 5's installer does not draw unless run in a virtual desktop Product: Wine Version: 1.1.26 Platform: PC URL: http://www.sonyericsson.com/cws/download/1/357/877/124 1789074/Sony_Ericsson_PC_Suite_5.009.00_Web_EN.exe OS/Version: Linux Status: NEW Keywords: download, Installer Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: kennybobs(a)o2.co.uk Created an attachment (id=22848) --> (http://bugs.winehq.org/attachment.cgi?id=22848) With virtual desktop The installer for the Sony Ericsson PC Suite is fully transparent, and has to be run in a virtual desktop. This is the entire console output: fixme:storage:StgCreateDocfile Storage share mode not implemented. fixme:reg:GetNativeSystemInfo (0x33288c) using GetSystemInfo() err:rebar:REBAR_NotifyFormat wrong response to WM_NOTIFYFORMAT (0), assuming ANSI Screenshots attached. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 4

[Bug 19593] New: Sony Ericsson Update Service exits after selecting phone model
by wine-bugs＠winehq.org March 24, 2013

March 24, 2013

http://bugs.winehq.org/show_bug.cgi?id=19593 Summary: Sony Ericsson Update Service exits after selecting phone model Product: Wine Version: 1.1.26 Platform: PC URL: http://www.sonyericsson.com/cws/download/1/110/61/1241 528352/Update_Service_Setup-2.9.5.16.exe OS/Version: Linux Status: NEW Keywords: download, hardware Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: kennybobs(a)o2.co.uk Blocks: 18047 The new version (2.9.7.22) of Sony Ericsson's Update Service exits silently after selecting the phone model. This is printed in the console output at this time: fixme:win:RegisterDeviceNotificationW (hwnd=0x40034, filter=0x1989e92c,flags=0x00000000), returns a fake device notification handle! fixme:win:RegisterDeviceNotificationW (hwnd=0x40034, filter=0x1989e92c,flags=0x00000000), returns a fake device notification handle! fixme:setupapi:CM_Locate_DevNodeW 0x1968e038 (null) 0x00000000: stub The application is used to update firmware on mobile phones via the USB. I can't find a direct link for this version, but any 2.9 version download auto-updates. "J2D_D3D=false wine Update\ Service.exe" required to run. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 5

[Bug 10572] New: Visio Viewer 2002 doesn't work
by wine-bugs＠winehq.org March 24, 2013

March 24, 2013

http://bugs.winehq.org/show_bug.cgi?id=10572 Summary: Visio Viewer 2002 doesn't work Product: Wine Version: CVS/GIT Platform: Other URL: http://www.microsoft.com/downloads/details.aspx?familyid =8fad9237-c0a7-4b80-a5df-46ce54dad2df OS/Version: other Status: NEW Keywords: download Severity: normal Priority: P2 Component: wine-misc AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com Visio Viewer is an activeX plugin for IE 5 and up. I've tried it with both Wine's builtin iexplore and with the Mozilla ActiveX Plugin on Firefox 1.0.7 (the last release supported by the plugin), no joy so far. The plugin installer can be downloaded from http://www.microsoft.com/downloads/details.aspx?familyid=8fad9237-c0a7-4b80… Firefox 1.0.7 can be downloaded from ftp://archive.mozilla.org/pub/mozilla.org/firefox/releases/1.0.7/win32/en-U… The Mozilla ActiveX Plugin can be downloaded from http://www.iol.ie/~locka/mozilla/plugin.htm To test the plugin after installation, try viewing Program Files/Microsoft Office/Visio Viewer/sample.htm The symptom is that sample.htm is simply blank. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 23143] New: SlingPlayer 2 unable to remember password
by wine-bugs＠winehq.org March 24, 2013

March 24, 2013

http://bugs.winehq.org/show_bug.cgi?id=23143 Summary: SlingPlayer 2 unable to remember password Product: Wine Version: 1.1.39 Platform: x86 URL: http://download.slingmedia.com/player/pc/SlingPlayer-2 .0.4-Setup.exe OS/Version: Linux Status: NEW Keywords: download, regression Severity: trivial Priority: P3 Component: msxml3 AssignedTo: wine-bugs(a)winehq.org ReportedBy: kennybobs(a)o2.co.uk CC: bunglehead(a)gmail.com Depends on: 23082 Created an attachment (id=28779) --> (http://bugs.winehq.org/attachment.cgi?id=28779) Wine ~1.1.38 +msxml (working) SlingPlayer 2 can read a password that has been saved using a previous version of Wine, but is unable to save a new password. Result of bisect: f414d3cf60081d47edc88783fc71ddd933c31cf7 is the first bad commit commit f414d3cf60081d47edc88783fc71ddd933c31cf7 Author: Nikolay Sivov <bunglehead(a)gmail.com> Date: Fri Feb 12 22:34:50 2010 +0300 msxml3: Reimplement IXMLDOMDocument::createAttribute() on top of ::createNode(). :040000 040000 2e1929ed92ed14c98175f7567bc78f5afdaddb2c 80e7d1759d6fb08f66920f858e4dfd2cb0ba85f7 M dlls http://source.winehq.org/git/wine.git/?a=commitdiff;h=f414d3cf60081d47edc88… Native msxml3 works. I have attached two +msxml traces: one from before the commit and one from after the commit. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 21434] New: append file example works on Vista but not in wine.
by wine-bugs＠winehq.org March 24, 2013

March 24, 2013

http://bugs.winehq.org/show_bug.cgi?id=21434 Summary: append file example works on Vista but not in wine. Product: Wine Version: 1.1.35 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: kernel32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: htl10(a)users.sourceforge.net Created an attachment (id=25810) --> (http://bugs.winehq.org/attachment.cgi?id=25810) zip file with source code, input file, and a cross-compiled binary. While trying to fix bug 21394 ("+" in cmd copy's syntax to join two files), I tried to an example of appending files in MSDN ( http://msdn.microsoft.com/en-us/library/aa363778%28VS.85%29.aspx ) and when I am testing my patch, it did not work, and so I tested the example itself, and it doesn't work either. Then I reboot to Vista and the example does work there, so obviously there is a bug with wine's File operations themselves. The example, is supposed to just append the content of file "one.txt" to file "two.txt" every time it is run. When the binary is run on Vista, "two.txt" increases in size every time "append.exe" is run as it should; but this does not work under wine cmd. The binary "append.exe" is created with cross-gcc in linux, simply by "i686-pc-mingw32-gcc file.c" ; feel free to rebuild from source, which is also attached in the zip file. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 8

[Bug 25938] New: Modo 501: Crashes on viewport loading (after main UI has finished loading).
by wine-bugs＠winehq.org March 19, 2013

March 19, 2013

http://bugs.winehq.org/show_bug.cgi?id=25938 Summary: Modo 501: Crashes on viewport loading (after main UI has finished loading). Product: Wine Version: 1.2 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: chiefwhosmoralsareelastix(a)googlemail.com Created an attachment (id=33064) --> (http://bugs.winehq.org/attachment.cgi?id=33064) Wine console output for modo 501. On launching Modo 501 the main interface loads correctly, however the viewport doesn't load, but shows through to the desktop background. After a few seconds the following error message is displayed by wine (1.2 and above): Program Error. The program modo.exe has encountered a serious problem and needs to close. We are sorry for the inconvenience. This may be caused by a deficiency in wine....etc. Modo 501 works to the same degree as 302 (some menus do not work but the program is still useable) with wine versions 1.0 up until 1.44 (the wine archives I was using for testing finished at 1.44). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 5

[Bug 21394] New: nul: nul and + doesn't not work for copy.
by wine-bugs＠winehq.org March 17, 2013

March 17, 2013

http://bugs.winehq.org/show_bug.cgi?id=21394 Summary: nul: nul and + doesn't not work for copy. Product: Wine Version: 1.1.35 Platform: x86 URL: http://www.ghostscript.com/ OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: cmd AssignedTo: wine-bugs(a)winehq.org ReportedBy: htl10(a)users.sourceforge.net am running nmake with win 7 sdk (vc 9 express) to build ghostscript . most of the build procedure ork as is, but a script used for copying files from one directory to another (gs/base/cp.bat) ----------------------- @rem $Id$ @echo off if "%2"=="." goto ne if exist _.tmp erase _.tmp rem Both of the following lines are necessary: rem the first one works on MS DOS and Windows 95/98 but not Windows NT, rem the second works on Windows NT but not the other MS OSs. rem > _.tmp copy nul: _.tmp > nul: copy /B %1+_.tmp %2 erase _.tmp goto x :ne copy /B %1 %2 :x ------------------------ does not work - using it as it result in a few "Path not found" about the use of nul: and also joining files ("+"). Granted nmake -f psi/msvc32.make works on windows. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10

[Bug 14438] New: Moving cursor in RA2 freezes game
by wine-bugs＠winehq.org March 16, 2013

March 16, 2013

http://bugs.winehq.org/show_bug.cgi?id=14438 Summary: Moving cursor in RA2 freezes game Product: Wine Version: 1.1.1 Platform: Other OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: thomas.vdburgt(a)xs4all.nl CC: thomas.vdburgt(a)xs4all.nl When mocing the cursor in Red Alert 2 the game freezes. In the menu's it totally freezes, ingame it stutters. This makes the game unplayable. No relevant console output is given, although wine not being able to change the screen to 16bpp (fixme:x11drv:X11DRV_desktop_SetCurrentMode Cannot change screen BPP from 32 to 16) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 27

[Bug 27003] New: Latest gnutls breaks wine ssl support
by wine-bugs＠winehq.org March 15, 2013

March 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=27003 Summary: Latest gnutls breaks wine ssl support Product: Wine Version: 1.3.19 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: wubbbi(a)gmx.de Hello :) I am using ArchLinux with wine 1.3.19 and GnuTls 2.12.3 and ssl Support seems to be broken. As you can see here http://appdb.winehq.org/objectManager.php?sClass=version&iId=19141 on the Topic "Cannot connect" for example, I am not the only one having this Problem. The error I get is: "GnuTLS error: Ein fataler TLS-Alarm wurde empfangen." In English: "GnuTLS error: A fatal TLS-Alarm had been recieved." I compiled wine with Debug enable. So if you have any further question, please ask me. More describtion: I cant connect Via SSL anymore. Every ssl connection is going to be canceld. As I can see, it is since GnuTLS 2.12.0 ... maybe a big change in GnuTLS? Pls take a look an it. Thank you and greetings Wubbbi ( Also my IRC-Name! ) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 8

[Bug 23100] New: BURRACO: startup error and then closing connection
by wine-bugs＠winehq.org March 15, 2013

March 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=23100 Summary: BURRACO: startup error and then closing connection Product: Wine Version: 1.2-rc2 Platform: x86-64 URL: http://appdb.winehq.org/objectManager.php?sClass=versi on&iId=19927 OS/Version: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: mac_man2005(a)hotmail.it Hi to all. I have tried to report the problem here: http://appdb.winehq.org/objectManager.php?sClass=version&iId=19927 I have followed the instructions reported at the beginning of that page. You can find a short description of the problem and the complete report of the error detail. Same error on two Ubuntu machines. One of them is surely 64 bit. The other one may be 32 bit. BURRACO version 4.53.0.82 Any suggestion please? Thanks. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 19