September 2019 - Wine-Bugs - list.winehq.org

[Bug 16964] New: NavyFIELD cannot read its .data files
by wine-bugs＠winehq.org Nov. 19, 2019

Nov. 19, 2019

http://bugs.winehq.org/show_bug.cgi?id=16964 Summary: NavyFIELD cannot read its .data files Product: Wine Version: 1.1.13 Platform: PC URL: http://www.navyfield.com/ OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: flamehawk96(a)yahoo.com after placing msvcp60.dll in to wine's system32 folder and setting quartz to native, Wine is able to get passed the EULA and into the log in screen. The problem starts when attempting to log in. The game console just says that the data files are corrupt (unless you try to log in with something wit htoo many or too little characters). In a normal situation this would be remedied by deleting all of the .data files (in the NF folder) and letting the game patcher replace them. I've noticed that the patcher keeps downloading something every time I run it. I'm guessing that it is replacing the .data files when it does this. but again, it doesn't solve the problem. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 11

[Bug 34227] New: AVR Studio 4.19 (build 730) fails to communicate with programmer
by wine-bugs＠winehq.org Nov. 19, 2019

Nov. 19, 2019

http://bugs.winehq.org/show_bug.cgi?id=34227 Bug #: 34227 Summary: AVR Studio 4.19 (build 730) fails to communicate with programmer Product: Wine Version: 1.6 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: ghieber(a)fastmail.net Classification: Unclassified Created attachment 45542 --> http://bugs.winehq.org/attachment.cgi?id=45542 screen shots and log file AVR Studio can control a variety of programmers and in-circuit-emulators. While the programming part could be worked around by using AVRDude or comparable applications, emulation can't. I have two of the oldest supported devices, an Atmel STK500 evaluation board, and a (not original) JTAGICE programmer / emulator. Basic communication with both devices works. The JTAGICE can not be further testet due to lack of a suitable target. The STK500 behaves as follows: connecting to the board (Tools > Program AVR > Connect, then click Connect) opens the STK500 dialog, Tab 1. screen shot 1. The lower panel indicates that communication is established. trying to transfer any data, for example by clicking the "read Signature" button results in the error message, screen shot 2. The same when clicking the "Fuses" tab, screen shot 3. the attached log contains a session consisting of starting up AVR Studio, connecting to the STK500 and trying the described read operations. All the output came during startup, except the last 4 lines, 2 of them are written when the error message pops up The bug appears under Wine 1.6, Wine 1.7 and Crossover 12.2.1. Operating system is Fedora19 / 64. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 6

[Bug 34201] New: Mp3Tag: Displayed list contents not automatically updated on certain changes
by wine-bugs＠winehq.org Nov. 19, 2019

Nov. 19, 2019

http://bugs.winehq.org/show_bug.cgi?id=34201 Bug #: 34201 Summary: Mp3Tag: Displayed list contents not automatically updated on certain changes Product: Wine Version: 1.7.0 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: tastky(a)gmail.com Classification: Unclassified Created attachment 45505 --> http://bugs.winehq.org/attachment.cgi?id=45505 Track ordering only switched back partially from inverse one Two kinds of issues that cause the displayed list content not being updated properly — unless I actively select a line or drag the window part containing the list outside of the X-Servers displayed space. With manual line selection, only that line is updated. With dragging, if I do that so that only certain lines / a part of a line is outside that space, the visible content on dragging it back into full view is only updated to that extent. Sometimes only the manual selection works. Issue 1: On Mp3Tag's main list, use the mouse to change column dimensions and/or drag a column header to switch the column ordering. Issue 2: Switching ordering by pressing on a column header on Mp3Tag's main list works fine, but switching it eg. in the "List of search results…" and "Adjust tag information" and windows leads to similar improperly updated display. To reproduce Issue 2: 1. Have at least one file in the main list, select any. 2. Press "Tag Sources" and select any source & any search result with more than one line. 3. Change ordering by pressing a column header either on that window or the one called by pressing "Next >". Mp3Tag 2.57, Wine 1.7.0 (consistent throughout each versions since I started using both together, some 2-3 years ago) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 4

[Bug 16873] New: Capella 2008 hangs when clicking on virtual keyboard
by wine-bugs＠winehq.org Nov. 19, 2019

Nov. 19, 2019

http://bugs.winehq.org/show_bug.cgi?id=16873 Summary: Capella 2008 hangs when clicking on virtual keyboard Product: Wine Version: 1.1.12 Platform: Other URL: http://www.capella.de/download_capella.htm OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: josh(a)stack.nl While checking bug 1567 (see there for startup issues), I noticed the following: Download the 2008 capella demo from the website and install it. When you get beyond the splash screen and click on one of the keys of the virtual keyboard, the application appears to enter an infinite loop. The mouse cursor inside the keyboard window flashes between the hourglass and normal cursor and the application does not respond any more. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 10

[Bug 19062] New: Wine link in favorites
by wine-bugs＠winehq.org Nov. 19, 2019

Nov. 19, 2019

http://bugs.winehq.org/show_bug.cgi?id=19062 Summary: Wine link in favorites Product: Wine Version: 1.1.24 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: Eldmannen+wine(a)gmail.com Windows comes with some pre-set favorites in C:\users\Alice\Favorites\ to the Microsoft website, and related such. Wine can have a link to the Wine website in /users/Alice/Favorites/ It should be .url files. I've attached a Wine.url file, that could be placed in /users/Alice/Favorites/Wine.url We could also have a link to the bugzilla, wiki, appdb, forums, etc. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 22

[Bug 20438] New: CallWave: Fails to start if in Window XP mode.
by wine-bugs＠winehq.org Nov. 19, 2019

Nov. 19, 2019

http://bugs.winehq.org/show_bug.cgi?id=20438 Summary: CallWave: Fails to start if in Window XP mode. Product: Wine Version: 1.1.31 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: gaming4jc2(a)yahoo.com Created an attachment (id=24270) --> (http://bugs.winehq.org/attachment.cgi?id=24270) Wine Bugs and Error Prompts from IAM.exe This is just a more or less minor issue I have. CallWave works perfectly (with the exception of not being able to play back recordings inside the program) on Windows 98 mode. Yet when I use the normal Windows XP mode it fails to even start and produces numerous errors. Attached is the wine bugs, and two prompts given by IAM.exe. Keep in mind it's not a CallWave issue since it works perfectly on a real Windows XP out of the box. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 34434] New: D&C Scheme Editor 5: Black menu
by wine-bugs＠winehq.org Nov. 18, 2019

Nov. 18, 2019

http://bugs.winehq.org/show_bug.cgi?id=34434 Bug #: 34434 Summary: D&C Scheme Editor 5: Black menu Product: Wine Version: 1.7.0 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: lukasz.wojnilowicz(a)gmail.com Classification: Unclassified Created attachment 45842 --> http://bugs.winehq.org/attachment.cgi?id=45842 Image shownig black rectangle Steps to reproduce: 1) remove ~/.wine 2) winetricks dotnet40 corefonts 3) install D&C Scheme Editor 5 4) start D&C Scheme Editor 5 5) unfold help menu Behaviour: Black rectangle. Expected behaviour: No black rectangle. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 5

[Bug 30587] New: Office 2007 apps (Word, Powerpoint) cannot be maximized after being unmaximized by window manager
by wine-bugs＠winehq.org Nov. 16, 2019

Nov. 16, 2019

http://bugs.winehq.org/show_bug.cgi?id=30587 Bug #: 30587 Summary: Office 2007 apps (Word, Powerpoint) cannot be maximized after being unmaximized by window manager Product: Wine Version: 1.5.3 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: adman.com(a)gmail.com Classification: Unclassified Tested with Wine 1.5.3, Ubuntu 12.04 LTS x64 from Wine PPA Package version 1.5.3-0ubuntu1~ppa1~precise4+pulse17. To reproduce: 1. Open Word 2007 or Powerpoint 2007 2. Maximize the window using the Word/Powerpoint maximize button in the upper-right corner. 3. Unmaximize using the same button 4. Maximize the window again using the same button 5. Unmaximize the window using the window manager (e.g. in the unity global menu use the unmaximize button, or in Gnome's window list, right click and choose unmaximize) 6. Window cannot be maximized anymore with the maximize button. Also, doing the same but swapping the office button with the wm button in all steps results in a window that can't be unmaximized. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13

[Bug 34723] New: Resident Evil 3: changing settings during the game results in a crash
by wine-bugs＠winehq.org Nov. 15, 2019

Nov. 15, 2019

http://bugs.winehq.org/show_bug.cgi?id=34723 Bug #: 34723 Summary: Resident Evil 3: changing settings during the game results in a crash Product: Wine Version: 1.7.4 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: winebugs140(a)gmail.com Classification: Unclassified Created attachment 46297 --> http://bugs.winehq.org/attachment.cgi?id=46297 RE3 log+error If you press F5 during the game to change some settings and then you confirm or cancel your choice, the program crashes. The problem can be reproduced in the demo (check out the link). Tested with: Windows Vista (without Wine), GeForce 9600M GS--the program works fine here Ubuntu 13.04, GeForce 9600M GS (NVIDIA driver 313) Mac OS X 10.7.5, ATI HD 2600 Pro, Mac Driver/X11 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 35925] New: fbo bailing out on context_set_gl_context
by wine-bugs＠winehq.org Nov. 15, 2019

Nov. 15, 2019

http://bugs.winehq.org/show_bug.cgi?id=35925 Bug ID: 35925 Summary: fbo bailing out on context_set_gl_context Product: Wine Version: 1.7.1 Hardware: x86-64 URL: http://appdb.winehq.org/objectManager.php?sClass=versi on&iId=30117 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: royceremer(a)gmail.com This has the exact same symptom as bugid#24067, which uses the same engine, but I do not believe this is a regression. I believe bugid#26802 may be a duplicate, although it's triggered by a different engine, and there isn't enough detail in that bug for me to be certain. Using orm=fbo, all model textures are invisible in Age of Wonders 3. Objects in the screenshots attached are only visible due to ambient occlusion and reflective effects on the surfaces. Using orm=backbuffer makes models appear solid, but loses many effects and is slow. (picture attached) Basically, no matter what winetricks or wine version I use, this engine will bail out here: https://github.com/mirrors/wine/blob/master/dlls/wined3d/context.c#L769 ... for completeness, I have duplicated the bug under the following additional conditions with a fresh wine prefix for each trial: ---wine1.7.1--- - d3dx9_43, d3dcompiler_43 - d3dx9_43, d3dcompiler_43, WINEARCH=win32 - d3dx9_43, d3dcompiler_43, WINEARCH=win32, force_s3tc_enable=true - d3dx9_43, d3dcompiler_43, WINEARCH=win32, force_s3tc_enable=true, glsl=disabled - d3dx11_43, d3dcompiler_43 - d3dx11_43, d3dcompiler_43, glsl=disabled - d3dx11_43, d3dcompiler_43, force_s3tc_enable=true - d3dx11_43, d3dcompiler_43, gdiplus, ddr=gdi - d3dx11_43, d3dcompiler_43, multisampling=disabled - d3dx11_43, d3dcompiler_43, multisampling=enabled - d3dx11_43, d3dcompiler_43, psm=disabled - d3dx11_43, d3dcompiler_43, psm=enabled - d3dx11_43, d3dcompiler_43, rtlm=disabled - d3dx11_43, d3dcompiler_43, rtlm=readdraw - d3dx11_43, d3dcompiler_43, strictdrawordering=enabled - d3dx11_43, d3dcompiler_43, videomemorysize=2048, vsm=hardware - d3dx11_43, d3dcompiler_43, vsm=hardware, psm=enabled - d3dx11_43, d3dcompiler_43, vsm=hardware - d3dx11_43, d3dcompiler_43, ao=enabled ---wine1.6.1--- - d3dx11_43, d3dcompiler_43 - d3dx9_43, d3dcompiler_43 - d3dx9_43, d3dcompiler_43, WINEARCH=win32 - d3dx9_43, d3dcompiler_43, WINEARCH=win32, glsl=disabled - d3dx9_43, d3dcompiler_43, glsl=disabled - d3dx9_43, d3dcompiler_43, force_s3tc_enable=true - d3dx9_43, d3dcompiler_43, gdiplus, ddr=gdi ---wine1.4.1--- - d3dx9_43, d3dcompiler_43 <--- this configuration didn't launch at all for different reasons Setting `MESA_DEBUG=1 force_s3tc_enable=true` did not log any additional messages, even after upgrading to libtxc-dxtn-dev_1.0.1-0.3ubuntu0sarvatt+quantal from ppa:xorg-edgers... so maybe that does what I think it does? Logs will be attached in gzip format since they have `WINEDEBUG=warn+all,trace+d3d,relay+d3d` and are over a gig (<100MB under gzip -9 though). Additional info about my system: - libtxc-dxtn-s2tc0_0~git20110809-3 - xserver-xorg_1:7.7+1ubuntu4 - attached glxinfo for my Nvidia 550 TI (vbios 70.26.3a.00.52) - ubuntu 12.10 quantal, x86_64 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 13