October 2021 - Wine-Bugs - list.winehq.org

[Bug 20805] New: FL Studio and MIDI Controller
by wine-bugs＠winehq.org Nov. 16, 2021

Nov. 16, 2021

http://bugs.winehq.org/show_bug.cgi?id=20805 Summary: FL Studio and MIDI Controller Product: Wine Version: 1.1.32 Platform: PC URL: http://flstudio.image-line.com/ OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: benjee.d(a)gmail.com I have installed FL studio 9. The problem is connecting an ALESIS PHOTON 25 ( midi controller by USB port ) no message is showed, but FL studio seems to not receiving midi signal, and is impossible to link the knobs and buttons, with this program interface. FL stduio includes one configuration tool to find midi devices, but nothing happens using it. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 8

[Bug 23859] New: FL Studio plugins add semicolon to saved file names
by wine-bugs＠winehq.org Nov. 16, 2021

Nov. 16, 2021

http://bugs.winehq.org/show_bug.cgi?id=23859 Summary: FL Studio plugins add semicolon to saved file names Product: Wine Version: 1.2 Platform: x86 URL: http://www.flstudio.com OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: billstei(a)hbci.com In the program FL Studio (9.1) some of the synth plugins add an extraneous suffix (semicolon) to the end of the file name. Example: Add the Toxic Biohazard plugin using menu CHANNELS->Add one->Toxic Biohazard. Now save a preset using the synth GUI (slightly right of top center on the GUI): OPTIONS->Save Program, which calls up a standard Windows File Save dialog window. If I use the name "MyPreset", the extension ".tbio" is added with an additional semicolon, so that the resulting file name is now "MyPreset.tbio;". This is probably a bug in Toxic Biohazard, given that not all FL Studio plugins (e.g. Sytrus) exhibit this behaviour, but this bad behaviour is probably masked/corrected by Windows, and if so, then perhaps Wine should also mask/correct it. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 6

[Bug 29611] New: FL Studio 10 is invisible without "emulate virtual desktop"
by wine-bugs＠winehq.org Nov. 16, 2021

Nov. 16, 2021

http://bugs.winehq.org/show_bug.cgi?id=29611 Bug #: 29611 Summary: FL Studio 10 is invisible without "emulate virtual desktop" Product: Wine Version: 1.3.37 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: realnc(a)gmail.com Classification: Unclassified When running FL Studio (version 10), the main application window is invisible. To clarify: it's not that an empty window appears or something like that. Instead, nothing appears except the initial pop-up dialog of FL Studio that informs you that this is a demo. The only thing that's visible is the task manager entry in KDE's task manager panel. When enabling "Emulate a virtual desktop" in winecfg, then the application shows up correctly. I'm using Wine 1.3.37 on Gentoo Linux AMD64, using the Radeon graphics driver (Gallium3D with KMS, Mesa 7.11.2 and also tried latest Git version.) When trying to reproduce, you can download FL Studio from here: http://flstudio.image-line.com/documents/download.html It's a free download (224MB) and you don't need to sign-up or anything. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 4

[Bug 30132] New: Not work FL Studio in latest wine
by wine-bugs＠winehq.org Nov. 16, 2021

Nov. 16, 2021

http://bugs.winehq.org/show_bug.cgi?id=30132 Bug #: 30132 Summary: Not work FL Studio in latest wine Product: Wine Version: 1.4-rc6 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: mikhail.v.gavrilov(a)gmail.com Classification: Unclassified Then I launch FL Studio throw exception in console: mikhail(a)p5k:~$ .wine/drive_c/Program\ Files/Image-Line/FL\ Studio\ 10/FL.exe err:seh:setup_exception_record stack overflow 904 bytes in thread 0009 eip 7ef93dce esp 00230fa8 stack 0x230000-0x231000-0x330000 FL Studio you can get here: http://demodownload.image-line.com/flstudio/flstudio_10.0.9.exe -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 8

[Bug 12279] New: wine not accepting regcode of FL Studio 8
by wine-bugs＠winehq.org Nov. 16, 2021

Nov. 16, 2021

http://bugs.winehq.org/show_bug.cgi?id=12279 Summary: wine not accepting regcode of FL Studio 8 Product: Wine Version: 0.9.58. Platform: Other OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dianat100(a)yahoo.com Wine doesn't accept the regcode of FL Studio 8 and the program appears in demo mode. It does, however accept FL Studio 7 regcode. Regcodes work fine under Windows XP. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 89

[Bug 46055] New: FL Studio 20: Built-in file browser incorrectly shows image files alongside plugins in plugin database
by wine-bugs＠winehq.org Nov. 16, 2021

Nov. 16, 2021

https://bugs.winehq.org/show_bug.cgi?id=46055 Bug ID: 46055 Summary: FL Studio 20: Built-in file browser incorrectly shows image files alongside plugins in plugin database Product: Wine Version: 3.18 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: ajduck(a)outlook.com Distribution: --- Created attachment 62640 --> https://bugs.winehq.org/attachment.cgi?id=62640 What it should look like (on Windows) FL Studio has a built-in file browser on the left. It can be used to load plugins in a folder called "plugin database". The plugins can have images associated with them that show as thumbnails. A basic description of how this works: when FL is installed or first used a folder called "plugin database" is created (the default location is ~/Documents/Image-Line/FL Studio/Presets/Plugin database/). In either "Effects" or "Generators", for each plugin there is a set of 3 files: .fst, .png and .nfo. The .fst is a FL Studio state file and is the file that loads the plugin. The .png is the thumbnail for the plugin. The .nfo (which has the same name as the .fst) basically points to the image and probably all of them contain only "Bitmap=Plugin.png". On Windows, the plugin database folder viewed from FL's file browser only lists the .fst files (with the pictures shown as a thumbnail for the .fst file) and hides the actual .png files that are referred to in the .nfo. See "What it should look like (on Windows)" image attached. On Wine, the plugin database folder doesn't replicate this behaviour and lists the .png files alongside the .fst files. See "What it shouldn't look like (on Wine)" image. Steps to reproduce: 1. Download FL Studio (link at bottom of this post) and install it. Skip ASIO4ALL installation if it comes up. 2. Open FL. It will load a project file on first startup. You can either just stay on that or go to File > New (if there's no text, press F12 -> F3 -> n, if a prompt comes up press n again). 3. On the left is the file browser sidebar. Click the button that has a plug icon (the last button of three) at the top of that sidebar. 4. Click on either the "Effects" or "Generators" folders, and then click on one of the subfolders. The .png files will be in the list, which doesn't happen on Windows. Tested in a clean wineprefix. OS: elementary OS 5.0 Juno (based on Ubuntu 18.04) Tested on Wine 3.19 but 3.18 also had this bug. ---------- Download link: http://demodownload.image-line.com/flstudio/flstudio_win_20.0.5.681.exe $ sha1sum flstudio_win_20.0.5.681.exe 11901b66a65c526203dacbab7ec6a3c61edb1553 flstudio_win_20.0.5.681.exe -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 6

[Bug 35193] New: FL Studio 11.x VSTi 'Slayer2' plugin doesn't work after registration (ASProtect 1.4 software protection)
by wine-bugs＠winehq.org Nov. 16, 2021

Nov. 16, 2021

http://bugs.winehq.org/show_bug.cgi?id=35193 Bug ID: 35193 Summary: FL Studio 11.x VSTi 'Slayer2' plugin doesn't work after registration (ASProtect 1.4 software protection) Product: Wine Version: 1.7.9 Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: focht(a)gmx.net Classification: Unclassified Hello folks, a user in #winehq reported another plugin not working with FL 11.x (after fixing bug 35178). Plugin download: http://downloads.image-line.com/slayer/slayer2_personalcopy_install.exe Interestingly: http://www.image-line.com/documents/slayer.html --- quote --- FL Slayer2 is no longer available for purchase. Existing registered customers will keep receiving support. --- quote --- Running 'VerA' (a specific tool to identify ASProtect versions) on the plugin main dll 'Slayer2.dll' reveals: --- snip --- EntryPoint check: ASProtect .DLL style Crypto info: Block type: 1(U), Info type: 1, Attempts: 1 Application name: Slayer 2 Application version: 1.0 ASProtect version: 1.4 build 04.01 Beta ASProtect registered to: Image-Line Software raw info data: [Slayer 2], [1.0], [1.4 build 04.01 Beta], [Image-Line Software] --- snip --- The plugin needs to be registered with license code to reproduce the problem (the user has a legit license). The protector decrypts the actual plugin code only with a valid license code during dll initialization. The 'plugin interface' dll export 'main' is redirected to real code which is later called by the hosting application -> FL11. In non-registered version the plugin dll export 'main' is just a stub, returning zero: --- snip --- 0024:Ret PE DLL (proc=0x10170001,module=0x10000000 L"Slayer2.dll",reason=PROCESS_ATTACH,res=(nil)) retval=1 0024:Ret KERNEL32.LoadLibraryA() retval=10000000 ret=7ede9e5e 0024:Call KERNEL32.GetProcAddress(10000000,7edf0f5b "VSTPluginMain") ret=7ede9f1e 0024:Ret KERNEL32.GetProcAddress() retval=00000000 ret=7ede9f1e 0024:Call KERNEL32.GetProcAddress(10000000,7edf0f69 "VstPluginMain") ret=7ede9f42 0024:Ret KERNEL32.GetProcAddress() retval=00000000 ret=7ede9f42 0024:Call KERNEL32.GetProcAddress(10000000,7edf0f77 "main") ret=7ede9f66 0024:Ret KERNEL32.GetProcAddress() retval=1000bd70 ret=7ede9f66 0024:Call KERNEL32.FreeLibrary(10000000) ret=7ede8d31 0024:Call PE DLL (proc=0x10170001,module=0x10000000 L"Slayer2.dll",reason=PROCESS_DETACH,res=(nil)) ... RemotePlugin::DebugMessage: mainEntry prodecure returned NULL --- snip --- The protector doesn't like relay thunks (WINEDEBUG=+relay), it will refuse to load further at some point, showing 'Error 198'. When you simply run it within FL11 it will spit out the following messages on terminal before dying: --- snip --- ... fixme:mountmgr:harddisk_ioctl Unsupported ioctl 4d004 (device=4 access=3 func=401 method=0) fixme:mountmgr:harddisk_ioctl Unsupported ioctl 4d004 (device=4 access=3 func=401 method=0) err:seh:setup_exception_record stack overflow 896 bytes in thread 0024 eip 7bc43cc2 esp 00240fb0 stack 0x240000-0x241000-0x340000 --- snip --- Since the user expressed interest to investigate this problem I will back off for now ;-) Just a hint for making analysis easier: Write a small winelib app that acts as loader/host to avoid running the rather large/complex FL Studio 11.x Calling 'LoadLibraryA("Slayer2.dll")' is sufficient. All the magic happens within dll entry point (attach event). === I will happily leave any bugs to people wanting to do their own analysis for fun/learning experience. Just indicate it: "I'm working on this" ... "I'll have a look" and I'll skip that bug (there are still thousands of bugs not analysed yet) ;-) Regards -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 4

[Bug 35178] New: FL Studio 11.x 'DirectWave' plugin doesn't work (unsupported FSCTL_IS_VOLUME_MOUNTED ioctl)
by wine-bugs＠winehq.org Nov. 16, 2021

Nov. 16, 2021

http://bugs.winehq.org/show_bug.cgi?id=35178 Bug ID: 35178 Summary: FL Studio 11.x 'DirectWave' plugin doesn't work (unsupported FSCTL_IS_VOLUME_MOUNTED ioctl) Product: Wine Version: 1.7.8 Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: focht(a)gmx.net Classification: Unclassified Hello folks, a user in #winehq reported this. I was able to reproduce the problem with the demo version of FL 11 using the following recipe (quoting IRC log): --- quote --- <alexmarkley> i am running into an issue with FL Studio 11 running on Linux under Wine 1.7.8 <alexmarkley> most everything appears to be working, but there are a couple of important software instrument plugins that fail to load any sounds ... <alexmarkley> focht: File -> New from template -> Minimal -> Basic with limiter <alexmarkley> focht: sub-window "Pattern 1", right click "Kick" -> Insert -> DirectWave <alexmarkley> focht: in the DirectWave window which appears, click the down arrow next to "Select Preset" <alexmarkley> focht: if you don't have any DirectWave presets, you can download a free one <alexmarkley> from within the GUI there <alexmarkley> anyway, once you select the preset you will see it loads the program, but clicking the piano keys results in no sound <alexmarkley> focht: you will also notice that, in the loaded program, each entry in the "Size" column is zero <alexmarkley> focht: which is bad... in native windows (running in VirtualBox) i see non-zero values for every one of those entries --- quote --- Relevant part of trace log: --- snip --- $ pwd /home/focht/.wine/drive_c/Program Files/Image-Line/FL Studio 11 $ WINEDEBUG=+tid,+seh,+relay wine ./FL.exe >>log.txt 2>&1 ... 0024:Call KERNEL32.LoadLibraryW(006ec0fc L"C:\\Program Files\\Image-Line\\FL Studio 11\\Plugins\\Fruity\\Generators\\DirectWave\\DirectWave.dll") ret=00e4a66a 0024:Call PE DLL (proc=0xbe7eca6,module=0xbe20000 L"DirectWave.dll",reason=PROCESS_ATTACH,res=(nil)) ... 0024:Call KERNEL32.ExpandEnvironmentStringsA(02a447c8 "C:\\Program Files\\Image-Line\\FL Studio 6\\Data\\Patches\\Packs\\SampleFusion\\Orchestral\\Strings\\Mellotron_02\\SYM_STR_C_2.wav",0033a07c,00000fff) ret=0be383ea 0024:Ret KERNEL32.ExpandEnvironmentStringsA() retval=00000078 ret=0be383ea ... 0024:Call KERNEL32.CreateFileA(0033ae28 "\\\\.\\C:",80000000,00000007,00000000,00000003,00000000,00000000) ret=0be59e4d ... 0024:Ret KERNEL32.CreateFileA() retval=000001f0 ret=0be59e4d ... 0024:Call KERNEL32.DeviceIoControl(000001f0,00090028,00000000,00000000,00000000,00000000,0033ae24,00000000) ret=0be59e8e ... 0024:Ret KERNEL32.DeviceIoControl() retval=00000000 ret=0be59e8e ... 0024:Call KERNEL32.GetLastError() ret=0be59e98 0024:Ret KERNEL32.GetLastError() retval=00000032 ret=0be59e98 --- snip --- The 'DirectWave' plugin library uses FSCTL_IS_VOLUME_MOUNTED ioctl to check if the specified volume is mounted before accessing each file (track). Wine doesn't implement/stub that ioctl hence the failure, resulting in tracks listed with zero size (as reported). MSDN: http://msdn.microsoft.com/en-us/library/windows/desktop/aa364574%28v=vs.85%… --- quote --- FSCTL_IS_VOLUME_MOUNTED control code Determines whether the specified volume is mounted, or if the specified file or directory is on a mounted volume. To perform this operation, call the DeviceIoControl function with the following parameters. BOOL DeviceIoControl( (HANDLE) hDevice, // handle to device FSCTL_IS_VOLUME_MOUNTED, // dwIoControlCode NULL, // lpInBuffer 0, // nInBufferSize NULL, // lpOutBuffer 0, // nOutBufferSize (LPDWORD) lpBytesReturned, // number of bytes returned (LPOVERLAPPED) lpOverlapped // OVERLAPPED structure ); ... Return value If the volume is currently mounted, DeviceIoControl returns a nonzero value. Otherwise, DeviceIoControl returns zero (0). To get extended error information, call GetLastError. Remarks The NTFS file system treats a locked volume as a dismounted volume. Therefore, this call returns zero (0) after a volume is locked on the NTFS file system. --- quote --- For quick test I short-circuited the ioctl handling on the client side (ntdll) like the existing FSCTL_LOCK_VOLUME and FSCTL_UNLOCK_VOLUME cases, returning 'success'. It made the plugin happy and the wav files were correctly loaded/processed. A more thorough solution is probably enhancing server/mountmgr. Source: http://source.winehq.org/git/wine.git/blob/5ba7f79bad4f4832d98d0f2897aea697… --- snip --- 1495 NTSTATUS WINAPI NtFsControlFile(HANDLE handle, HANDLE event, PIO_APC_ROUTINE apc, 1496 PVOID apc_context, PIO_STATUS_BLOCK io, ULONG code, 1497 PVOID in_buffer, ULONG in_size, PVOID out_buffer, ULONG out_size) 1498 { ... 1509 switch(code) 1510 { 1511 case FSCTL_DISMOUNT_VOLUME: ... 1517 case FSCTL_PIPE_PEEK: 1518 { ... 1590 case FSCTL_LOCK_VOLUME: 1591 case FSCTL_UNLOCK_VOLUME: 1592 FIXME("stub! return success - Unsupported fsctl %x (device=%x access=%x func=%x method=%x)\n", 1593 code, code >> 16, (code >> 14) & 3, (code >> 2) & 0xfff, code & 3); 1594 status = STATUS_SUCCESS; 1595 break; ... 1619 case FSCTL_PIPE_LISTEN: 1620 case FSCTL_PIPE_WAIT: 1621 default: 1622 status = server_ioctl_file( handle, event, apc, apc_context, io, code, 1623 in_buffer, in_size, out_buffer, out_size ); 1624 break; 1625 } 1626 1627 if (status != STATUS_PENDING) io->u.Status = status; 1628 return status; 1629 } --- snip --- $ sha1sum flstudio_11.0.4.exe f9bdc2fb0b8d18ffce90e048b12a0c196d0b82d0 flstudio_11.0.4.exe $ du -sh flstudio_11.0.4.exe 301M flstudio_11.0.4.exe $ wine --version wine-1.7.8-278-g53dc001 Regards -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 9

[Bug 51646] New: Rockstar Social Club installer crashes
by WineHQ Bugzilla Nov. 16, 2021

Nov. 16, 2021

https://bugs.winehq.org/show_bug.cgi?id=51646 Bug ID: 51646 Summary: Rockstar Social Club installer crashes Product: Wine-staging Version: 6.15 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: b1779506(a)trbvn.com CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com Distribution: --- On ubuntu 21.04 official wine packages, wine 6.15~hirsute-1 wine --version wine-6.15 (Staging) Launcher: https://socialclub.rockstargames.com/rockstar-games-launcher wine Rockstar-Games-Launcher.exe 002c:fixme:winediag:LdrInitializeThunk wine-staging 6.15 is a testing version containing experimental patches. 002c:fixme:winediag:LdrInitializeThunk Please mention your exact version when filing bug reports on winehq.org. 0034:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 0034:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 005c:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 005c:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 006c:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 006c:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 007c:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 007c:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 007c:err:winediag:is_broken_driver Broken NVIDIA RandR detected, falling back to RandR 1.0. Please consider using the Nouveau driver instead. 0094:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 0094:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 0034:err:winediag:is_broken_driver Broken NVIDIA RandR detected, falling back to RandR 1.0. Please consider using the Nouveau driver instead. 002c:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 002c:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 002c:err:winediag:is_broken_driver Broken NVIDIA RandR detected, falling back to RandR 1.0. Please consider using the Nouveau driver instead. 0024:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 0024:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 00f4:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 00f4:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 0024:err:winediag:is_broken_driver Broken NVIDIA RandR detected, falling back to RandR 1.0. Please consider using the Nouveau driver instead. 00fc:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 00fc:fixme:font:get_name_record_codepage encoding 20 not handled, platform 1. 00fc:err:winediag:is_broken_driver Broken NVIDIA RandR detected, falling back to RandR 1.0. Please consider using the Nouveau driver instead. wine: Unhandled page fault on read access to 666E497B at address 7BC25EE2 (thread 00fc), starting debugger... 00fc:err:seh:NtRaiseException Unhandled exception code c0000005 flags 0 addr 0x7bc25ee2 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 8

[Bug 41073] New: Tahoma (?) rendering problems
by wine-bugs＠winehq.org Nov. 15, 2021

Nov. 15, 2021

https://bugs.winehq.org/show_bug.cgi?id=41073 Bug ID: 41073 Summary: Tahoma (?) rendering problems Product: Wine Version: 1.9.15 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: public.avatar(a)gmail.com Distribution: --- Created attachment 55252 --> https://bugs.winehq.org/attachment.cgi?id=55252 New clean prefix, tahoma looks ugly and broken I switched from infinality to new cleartype hinting (freertype 2.6.5). After that I have strange problems with fonts rendering in wine (rest system works fine). I played a lot with fontconfig settings, but it looks like my actions don't have impact on tahoma rendering at all. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 14