- Wine-GitLab - list.winehq.org

[PATCH v14 0/4] MR8394: Fix Clip Studio Paint crash with Windows 10 compatibility mode
by Ignacy Kuchciński Feb. 1, 2026

Feb. 1, 2026

This fixes the crash when launching ClipStudioPaint.exe with Windows 10 compatiblity mode by adding the minimum required windows.ui and windows.storage definitions and stubs. Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=58254 -- v14: windows.storage: Add stubs for StorageFile class. include: Add Windows.Storage.StorageFile missing definitions. windows.ui: Add stubs for RadialController classes. include: Add Windows.UI.Input.RadialController definitions. https://gitlab.winehq.org/wine/wine/-/merge_requests/8394

1 5

[PATCH v5 0/3] MR10007: Support enabling/disabling IME on winewayland
by Ziia Shi (＠mkrsym1) Feb. 1, 2026

Feb. 1, 2026

Currently, IME is always enabled for all applications. This can cause some very annoying issues on winewayland. For example, fcitx takes over the character repeat functionality when enabled, and does it via repeatedly sending sequences of keyup/keydown, which leads to applications not being able to track hold duration of a button (can be reproduced on any game which requires holding a letter key). The spec states that the enable request should only be sent when a text edit is focused, and a disable request should be sent when it is unfocused. Windows provides a "similar-ish" mechanism: applications can use ImmAssociateContext/ImmAssociateContextEx to associate an IMC when IME should be enabled, and set associated IMC to null when it should be disabled. From my rather limited testing, it is implemented this way in Chromium/CEF, QT and Unity. Setting it to null internally results in deactivation of the currently associated context. This MR makes the ImeSetActiveContext function of the builtin IME utilize a new driver function to communicate activation status. It does not take into account which specific context was activated, thus semi-stub. This fixes behavior of applications using the above-mentioned components. I only implemented it for winewayland, it probably should also be implemented for winex11 too, but I'm not sure how. ~~Unfortunately this breaks IME input in Wine comctl32 components. I am not sure how it is supposed to behave on Windows or how to test it at the current point, will look into it later. Having IME on by default appears to "fix" it, but that is very likely not the Windows behavior; moreover, at least Unity does not disable IME on start, which causes the above-mentioned issue to occur until a textbox is manually focused and unfocused.~~ -- v5: winewayland: Implement SetIMEEnabled driver call. https://gitlab.winehq.org/wine/wine/-/merge_requests/10007

2 4

[PATCH v13 0/4] MR8394: Fix Clip Studio Paint crash with Windows 10 compatibility mode
by Ignacy Kuchciński Feb. 1, 2026

Feb. 1, 2026

This fixes the crash when launching ClipStudioPaint.exe with Windows 10 compatiblity mode by adding the minimum required windows.ui and windows.storage definitions and stubs. Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=58254 -- v13: windows.storage: Add stubs for StorageFile class. include: Add Windows.Storage.StorageFile missing definitions. windows.ui: Add stubs for RadialController classes. include: Add Windows.UI.Input.RadialController definitions. https://gitlab.winehq.org/wine/wine/-/merge_requests/8394

1 6

[PATCH v4 0/3] MR10007: Draft: Support enabling/disabling IME on winewayland
by Ziia Shi (＠mkrsym1) Feb. 1, 2026

Feb. 1, 2026

Currently, IME is always enabled for all applications. This can cause some very annoying issues on winewayland. For example, fcitx takes over the character repeat functionality when enabled, and does it via repeatedly sending sequences of keyup/keydown, which leads to applications not being able to track hold duration of a button (can be reproduced on any game which requires holding a letter key). The spec states that the enable request should only be sent when a text edit is focused, and a disable request should be sent when it is unfocused. Windows provides a "similar-ish" mechanism: applications can use ImmAssociateContext/ImmAssociateContextEx to associate an IMC when IME should be enabled, and set associated IMC to null when it should be disabled. From my rather limited testing, it is implemented this way in Chromium/CEF, QT and Unity. Setting it to null internally results in deactivation of the currently associated context. This MR makes the ImeSetActiveContext function of the builtin IME utilize a new driver function to communicate activation status. It does not take into account which specific context was activated, thus semi-stub. This fixes behavior of applications using the above-mentioned components. I only implemented it for winewayland, it probably should also be implemented for winex11 too, but I'm not sure how. Unfortunately this breaks IME input in Wine comctl32 components. I am not sure how it is supposed to behave on Windows or how to test it at the current point, will look into it later. Having IME on by default appears to "fix" it, but that is very likely not the Windows behavior; moreover, at least Unity does not disable IME on start, which causes the above-mentioned issue to occur until a textbox is manually focused and unfocused. -- v4: winewayland: Implement SetIMEEnabled driver call. https://gitlab.winehq.org/wine/wine/-/merge_requests/10007

2 4

[PATCH v2 0/3] MR10007: Draft: Support enabling/disabling IME on winewayland
by Ziia Shi (＠mkrsym1) Feb. 1, 2026

Feb. 1, 2026

Currently, IME is always enabled for all applications. This can cause some very annoying issues on winewayland. For example, fcitx takes over the character repeat functionality when enabled, and does it via repeatedly sending sequences of keyup/keydown, which leads to applications not being able to track hold duration of a button (can be reproduced on any game which requires holding a letter key). The spec states that the enable request should only be sent when a text edit is focused, and a disable request should be sent when it is unfocused. Windows provides a "similar-ish" mechanism: applications can use ImmAssociateContext/ImmAssociateContextEx to associate an IMC when IME should be enabled, and set associated IMC to null when it should be disabled. From my rather limited testing, it is implemented this way in Chromium/CEF, QT and Unity. Setting it to null internally results in deactivation of the currently associated context. This MR makes the ImeSetActiveContext function of the builtin IME utilize a new driver function to communicate activation status. It does not take into account which specific context was activated, thus semi-stub. This fixes behavior of applications using the above-mentioned components. I only implemented it for winewayland, it probably should also be implemented for winex11 too, but I'm not sure how. Unfortunately this breaks IME input in Wine comctl32 components. I am not sure how it is supposed to behave on Windows or how to test it at the current point, will look into it later. Having IME on by default appears to "fix" it, but that is very likely not the Windows behavior; moreover, at least Unity does not disable IME on start, which causes the above-mentioned issue to occur until a textbox is manually focused and unfocused. -- v2: winewayland: Implement SetIMEEnabled driver call. https://gitlab.winehq.org/wine/wine/-/merge_requests/10007

2 3

[PATCH 0/3] MR10007: Draft: Support enabling/disabling IME on winewayland
by Ziia Shi (＠mkrsym1) Feb. 1, 2026

Feb. 1, 2026

Currently, IME is always enabled for all applications. This can cause some very annoying issues on winewayland. For example, fcitx takes over the character repeat functionality when enabled, and does it via repeatedly sending sequences of keyup/keydown, which leads to applications not being able to track hold duration of a button (can be reproduced on any game which requires holding a letter key). The spec states that the enable request should only be sent when a text edit is focused, and a disable request should be sent when it is unfocused. Windows provides a "similar-ish" mechanism: applications can use ImmAssociateContext/ImmAssociateContextEx to associate an IMC when IME should be enabled, and set associated IMC to null when it should be disabled. From my rather limited testing, it is implemented this way in Chromium/CEF, QT and Unity. Setting it to null internally results in deactivation of the currently associated context. This MR makes the ImeSetActiveContext function of the builtin IME utilize a new driver function to communicate activation status. It does not take into account which specific context was activated, thus semi-stub. This fixes behavior of applications using the above-mentioned components. I only implemented it for winewayland, it probably should also be implemented for winex11 too, but I'm not sure how. Unfortunately this breaks IME input in Wine comctl32 components. I am not sure how it is supposed to behave on Windows or how to test it at the current point, will look into it later. Having IME on by default appears to "fix" it, but that is very likely not the Windows behavior; moreover, at least Unity does not disable IME on start, which causes the above-mentioned issue to occur until a textbox is manually focused and unfocused. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/10007

2 3

[PATCH v13 0/1] MR9061: cabinet: Add LZX compression support to FCI
by Eric Lasota (＠ejlasota) Jan. 31, 2026

Jan. 31, 2026

This adds LZX compression support to FCI. Most of the work for this was done here: https://github.com/elasota/liblzx The LZX compression code is based on the LZX compression code from wimlib with modifications to support the cabinet variant and streaming compression. Eric Biggers (the author of wimlib) has given permission to redistribute the modified LZX code under LGPLv2 terms: https://wimlib.net/forums/viewtopic.php?t=854 I've been testing this against some large data sets (dumped game assets, Visual Studio installation) with a test program and decompressing with 7-zip and diffs have been coming back OK. -- v13: cabinet: lzx compression support https://gitlab.winehq.org/wine/wine/-/merge_requests/9061

4 3

[PATCH 0/4] MR9961: d2d1: Partially implement d2d_device_context_Flush().
by Zhiyi Zhang (＠zhiyi) Jan. 30, 2026

Jan. 30, 2026

React Native applications rely on d2d_device_context_Flush() returning S_OK. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/9961

4 7

Re: [PATCH v2 0/1] MR10002: winewayland: Fix non-square icons with xdg-toplevel-icon protocol.
by Alex Schwartz (＠alexschwartz01) Jan. 30, 2026

Jan. 30, 2026

Everything works! Thanks -- https://gitlab.winehq.org/wine/wine/-/merge_requests/10002#note_128468

1 0

[PATCH 0/2] MR10003: advapi32/tests: Add a test for creating service with empty display name.
by Dmitry Timoshkov (＠dmitry) Jan. 30, 2026

Jan. 30, 2026

-- https://gitlab.winehq.org/wine/wine/-/merge_requests/10003

2 2

[PATCH 0/1] MR10002: winewayland: Fix non-square icons with xdg-toplevel-icon protocol.
by Etaash Mathamsetty (＠etaash.mathamsetty) Jan. 30, 2026

Jan. 30, 2026

xdg-toplevel-icon only supports square icons, so we must insert padding around the rectangular icon to ensure that the buffer sent to the compositor is square. Based on @alexschwartz01 original MR. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/10002

2 2

Re: [PATCH v5 0/1] MR9968: ntdll: Report all possible serial baud rates.
by Alex Henrie (＠alexhenrie) Jan. 30, 2026

Jan. 30, 2026

On Fri Jan 30 00:28:49 2026 +0000, Myles Gray wrote: > I think I had fixed it just before you commented, we should be in a good > place. I was going off what the "Merge blocked" check was saying. I find > it unlikely there is a MC. Yeah, that warning is misleading. Don't worry about it, Alexandre will do the rebase himself when he accepts the patch. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/9968#note_128442

1 0

Re: [PATCH v5 0/1] MR9968: ntdll: Report all possible serial baud rates.
by Myles Gray (＠magnix) Jan. 30, 2026

Jan. 30, 2026

On Fri Jan 30 00:28:49 2026 +0000, Alex Henrie wrote: > Can you just do `git reset --hard > fbb088edbd768b647c27ebeb03239b4f9f8c8521 && git push -f` to go back to > your previously submitted patch? You don't have to rebase your patches > unless there's a merge conflict. I think I had fixed it just before you commented, we should be in a good place. I was going off what the "Merge blocked" check was saying. I find it unlikely there is a MC. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/9968#note_128441

1 0

Re: [PATCH v5 0/1] MR9968: ntdll: Report all possible serial baud rates.
by Alex Henrie (＠alexhenrie) Jan. 30, 2026

Jan. 30, 2026

On Fri Jan 30 00:23:01 2026 +0000, Myles Gray wrote: > Apologies, tried to rebase - failed. Will clean up. Can you just do `git reset --hard fbb088edbd768b647c27ebeb03239b4f9f8c8521 && git push -f` to go back to your previously submitted patch? You don't have to rebase your patches unless there's a merge conflict. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/9968#note_128440

1 0

Re: [PATCH v5 0/1] MR9968: ntdll: Report all possible serial baud rates.
by Alex Henrie (＠alexhenrie) Jan. 30, 2026

Jan. 30, 2026

> Is there a way to test hardware support on the Unix side? Should we be doing that? I couldn't find any Linux API for getting the baud rates that are actually supported by the hardware. Reporting all of the possible baud rates seems to be the best we can do, and it's unlikely to cause any problems. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/9968#note_128439

1 0

[PATCH v4 0/115] MR9968: ntdll: Report all possible serial baud rates.
by Myles Gray (＠magnix) Jan. 30, 2026

Jan. 30, 2026

This fix is necessary to allow for applications that use GetCommProperties() where the hardware device uses a baud rate \>115200. Without, these devices and applications are non-functional. Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=59290 -- v4: shell32: Create parent directories when creating trash directory. winebus.sys: Add INOTIFY_CFLAGS to UNIX_CFLAGS. winhttp/tests: Add broken in test_WinHttpGetProxyForUrl. mf/tests: Test topology loader transform enumeration. mf/tests: Add more topology loader tests. mf/tests: Do not expect stereo audio when a decoder and resampler are used. mf/tests: Validate the input type in the topology test sink. mf/tests: Test resampler output type after setting the input type. winegstreamer: Support null type in resampler SetOutputType(). winegstreamer: Support null type in resampler SetInputType(). winegstreamer: Do not clear the output type in resampler SetInputType(). d2d1: Warn in d2d_device_context_set_error(). shell32: Create parent directories when creating trash directory. dwrite/layout: Improve support for wrapping modes. dwrite/layout: Partially implement HitTestTextPosition(). kernel32: Implement TH32CS_SNAPMODULE32 support for CreateToolhelp32Snapshot. kernel32/tests: Test CreateToolhelp32Snapshot with TH32CS_SNAPMODULE32. kernel32: Fix CreateToolhelp32Snapshot on old WoW64. include: Add TH32CS_SNAPMODULE32. kernel32/tests: Handle ERROR_BAD_LENGTH from CreateToolhelp32Snapshot. kernel32/tests: Fix CreateToolhelp32Snapshot failure check. start: Remove quotes from the path specified by '/d'. cmd/tests: Add test for 'start' with '/d'. winevulkan: Get rid of debug handles unwraps in struct chains. winevulkan: Factor out pNext and sType name checks. winevulkan: Inline make_vulkan loader_body method. winevulkan: Filter out non required types by default when enumerating. winevulkan: Always sort constant and defines. winevulkan: Generate function pointers interleaved with structs. wminet_utils: Implement CloneEnumWbemClassObject. wminet_utils: Implement ExecQueryWmi. wminet_utils: Implement ConnectServerWmi. wminet_utils: Implement GetCurrentApartmentType. wminet_utils: Stub Initialize. wminet_utils: Add stub dll. ntoskrnl: Handle FileFsDeviceInformation. ntoskrnl: Fill the Characteristics field of DEVICE_OBJECT. ntoskrnl/tests: Test DEVICE_OBJECT fields. ntoskrnl/tests: Test FileFsDeviceInformation. kernel32/tests: Add tests of StorageDeviceTrimProperty query. mountmgr.sys: Stub StorageDeviceTrimProperty query. include: Update STORAGE_BUS_TYPE in ntddstor.h. dwrite/tests: Add a test for newline clusters with HitTestTextPosition(). winevulkan: Remove unnecessary make_vulkan is_alias. winevulkan: Enumerate types from the base Type class. winevulkan: Take all type dependencies into account when ordering. winevulkan: Simplify make_vulkan structure generation. winevulkan: Use the Define class for constants too. win32u: Specify NtUserCreateWindowEx handle arguments as ptr. winebuild: Disallow int64 and int128 types for syscall entry points. ntdll: Don't use 64-bit arguments for NtSetLdtEntries(). winedump: Print CLR string offset instead of index. qasf: Don't start a stopped stream in media_seeking_ChangeCurrent. qasf: Stop the WMReader first in asf_reader_destroy. cmd: Allow '/' in quoted 'WCMD_pushd' args. opengl32: Fix a typo in client-side GLsync allocated object. ddraw: Enumerate the ramp device. mshtml: Update element event handlers when the corresponding attribute value changes. mshtml: Remove event handler when setting its property to a string in IE9+ modes. dmsynth: Clear the buffer notifications before closing the event handle. dmsynth: Estimate a continuously-advancing buffer position for a more precise timing. dmsynth: Call GetCurrentPosition from a separate thread. dmsynth: Simplify synth_sink_wait_play_end by making it similar to the main rendering loop. dmsynth: Try to maintain a fixed write latency by varying the wait time. dmsynth: Exit the render thread when initialization fails. dmsynth: Set the event on the error path in synth_sink_render_thread. dwrite/layout: Store full resolved level for each run. dwrite/layout: Rework line helper to take cluster count instead of upper boundary. dwrite/tests: Add another HitTestTextPosition() test. dwrite/layout: Preserve whitespace flag for all types of clusters. dwrite/layout: Use whole text buffer to set line 'newline' length metric. dwrite/tests: Add some tests for DetermineMinWidth(). dwrite/layout: Add a helper for producing lines. dwrite/tests: Add more tests for whitespace flag of inline clusters. dwrite/layout: Fix itemization with inline objects. dwrite/layout: Set RTL flag for clusters representing inline objects. dwrite/tests: Add more tests for GetClusterMetrics(). windows.ui: Add corewindow_static_GetForCurrentThread() stub. windows.ui/tests: Add tests for corewindow_static_GetForCurrentThread(). windows.ui: Add ICoreWindowStatic stub. winevulkan: Get rid of make_vulkan type_info. winevulkan: Implement type aliasing with the base class. winevulkan: Implement require and set_order in the base class. winevulkan: Introduce a new Type base class for types. winevulkan: Hoist some type info in local variables. winevulkan: Rename make_vulkan VkVariable type to type_name. dbghelp: Allow symbol lookup methods to return symref instead of ptr. dbghelp: Start implementing symbol information from symref_t. dbghelp/pdb: Introduce helper to search in DBI globals. dbghelp/pdb: Create symref for top and compilands. dbghelp/pdb: Always load TPI header in init_DBI(). dbghelp: Use same request as native to get TLS variable offset. kernelbase: Return S_OK in ResizePseudoConsole. include: Add enum flag operators for D3D11_RLDO_FLAGS. include: Add D3D12_FEATURE_DATA_VIDEO_MOTION_ESTIMATOR in d3d12video.idl. crt: Run MSVC constructors and destructors. include: Add prototype for _initterm. winegcc: Merge .CRT sections for windows targets. winebuild: Generate start and end symbols for .CRT sections. makefiles: Generate version resources from makefile variables. winewayland: Fix build error with older wl_pointer interface. windows.ui: Implement uisettings_UIElementColor(). twinapi.appcore: Add statics2_GetForCurrentView() stub. twinapi.appcore/tests: Add tests for statics2_GetForCurrentView(). twinapi.appcore/tests: Add tests for Windows.ApplicationModel.Core.CoreApplication activation factory. twinapi.appcore: Add Windows.ApplicationModel.Core.CoreApplication activation factory. opengl32: Move sync handle allocation to the client side. opengl32: Move current context error to the client wrapper. opengl32: Move context handle allocation to the client side. opengl32: Return early on memory allocation failure. opengl32: Move pbuffer handle allocation to the client side. opengl32: Generate function pointers with wrapper types. win32u: Extract pbuffer create/destroy to dedicated helpers. gdiplus/tests: Add tests for GdipWarpPath. This merge request has too many patches to be relayed via email. Please visit the URL below to see the contents of the merge request. https://gitlab.winehq.org/wine/wine/-/merge_requests/9968

1 1

[PATCH v3 0/1] MR9968: ntdll: Report all possible serial baud rates.
by Myles Gray (＠magnix) Jan. 30, 2026

Jan. 30, 2026

This fix is necessary to allow for applications that use GetCommProperties() where the hardware device uses a baud rate \>115200. Without, these devices and applications are non-functional. Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=59290 -- v3: ntdll: Report all possible serial baud rates. https://gitlab.winehq.org/wine/wine/-/merge_requests/9968

4 4

Re: [PATCH v2 0/1] MR10001: shell32: Create parent directories when creating trash directory. - approved
by Alexandre Julliard (＠julliard) Jan. 29, 2026

Jan. 29, 2026

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/10001

1 0

Re: [PATCH v2 0/1] MR10000: winebus.sys: Add INOTIFY_CFLAGS to UNIX_CFLAGS. - approved
by Alexandre Julliard (＠julliard) Jan. 29, 2026

Jan. 29, 2026

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/10000

1 0

Re: [PATCH v3 0/1] MR9964: winhttp/tests: Add broken in test_WinHttpGetProxyForUrl. - approved
by Alexandre Julliard (＠julliard) Jan. 29, 2026

Jan. 29, 2026

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/9964

1 0

Re: [PATCH v4 0/8] MR9947: mf/tests: Add more topology loader tests. - approved
by Alexandre Julliard (＠julliard) Jan. 29, 2026

Jan. 29, 2026

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/9947

1 0

Re: [PATCH v3 0/1] MR9955: d2d1: Log errors in d2d_device_context_set_error(). - approved
by Alexandre Julliard (＠julliard) Jan. 29, 2026

Jan. 29, 2026

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/9955

1 0

[PATCH v2 0/2] MR9968: serial: Fixed maximum baud rate for devices >115200 baud.
by Myles Gray (＠magnix) Jan. 29, 2026

Jan. 29, 2026

This fix is necessary to allow for applications that use GetCommProperties() where the hardware device uses a baud rate >115200. Without, these devices and applications are non-functional. Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=59290 -- v2: serial: Added BAUD_128K as a valid SettableBaud for end-devices using it. https://gitlab.winehq.org/wine/wine/-/merge_requests/9968

5 5

[PATCH 0/1] MR10001: shell32: Create parent directories when creating trash directory.
by Bernhard Übelacker Jan. 29, 2026

Jan. 29, 2026

This reverts the first attempt in 93f3d8ae and replaces again the first CreateDirectoryW by an SHCreateDirectoryExW. Followup to: 93f3d8ae and 82ad0ecd Sorry for the inconvenience caused by my first attempt in !9960. Unfortunately I missed to expect inverse success return value from SHCreateDirectoryExW. With this mistake the failure still disappeared in previously failing testbot machines, but unfortunately gitlab started to show the failure. [Test pattern page](https://test.winehq.org/data/patterns.html#shell32:recyclebin) [Test run with this patch](https://testbot.winehq.org/JobDetails.pl?Key=161633) CC: @jactry -- https://gitlab.winehq.org/wine/wine/-/merge_requests/10001

1 1

[PATCH v10 0/6] MR9646: mf/tests: Scrubbing tests
by Brendan McGrath (＠redmcg) Jan. 29, 2026

Jan. 29, 2026

This MR adds tests for how scrubbing and rate changes work within the Media Session. -- v10: mf/tests: Check that Rate change in PLAY state is ignored. mf/tests: Test that there is no pre-roll during scrubbing. mf/tests: Fix leaks in test source. mf/tests: Add ClockStateSink to test media sink. mf/tests: Modify test_media_sink to store test_stream_sink. mf/tests: Modify test_seek_clock_sink to be ref counted. https://gitlab.winehq.org/wine/wine/-/merge_requests/9646

2 8