June 2008 - Wine-Bugs - list.winehq.org

[Bug 13194] New: Gordian Knot unable to open codec settings dialog
by wine-bugs＠winehq.org March 15, 2013

March 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=13194 Summary: Gordian Knot unable to open codec settings dialog Product: Wine Version: 1.0-rc1 Platform: PC-x86-64 URL: http://sourceforge.net/projects/gordianknot OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: msvfw32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: emwine(a)earthlink.net Created an attachment (id=13019) --> (http://bugs.winehq.org/attachment.cgi?id=13019) testcase source and exe Install Codec Pack (for XviD), and rippack for GK. Run, go to options tab, click "First Pass" under XviD default codec settings. Nothing. Same with other codecs and "Codec settings" when trying a compressibility test. GK is open source, but in pascal. So I created a small testcase in VC++ 6.0 using the same technique. Testcase relies on XviD as opposed to other codecs. I'm not 100% sure that XviD (and other codecs) are properly registered so that the technique ought to work. But I think the problem is not codec registration. Also, I guessed at the component. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 14140] New: Entropia Universe installer hangs
by wine-bugs＠winehq.org March 15, 2013

March 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=14140 Summary: Entropia Universe installer hangs Product: Wine Version: CVS/GIT Platform: Other URL: http://www.project-entropia.com OS/Version: other Status: NEW Keywords: download Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com The current installer, 94aaad630331ce64c219f45e31175f913e9ba402 entropia_installer.exe goes into a loop forever, scanning backwards from the end of the commandline, but not hitting its expected termination condition. You can watch this with WINEDEBUG=+relay ~/wine-git/wine entropia_installer.exe grep Call.*strcmp log Interestingly, it compares each char to both / and \. And if you pass /, it gets happy and compares against u. Passing /u makes it really happy, and it shows a ui briefly. It seems to install a few files, then exits. It should have launched the real downloader, ~/.wine/drive_c/Program Files/MindArk/Entropia Universe/ClientLoader.exe Running that by hand downloads a bunch of stuff, then exits. I think it's supposed to run ~/.wine/drive_c/Program Files/MindArk/Entropia Universe/Entropia.exe When you do this by hand, wine complains err:module:find_forwarded_export function not found for forward 'd3dx8.D3DXGetImageInfoFromFileA' used by L"C:\\windows\\system32\\d3dx9_36.dll". If you are using builtin L"d3dx9_36.dll", try using the native one instead. err:module:find_forwarded_export function not found for forward 'd3dx9_36.D3DXGetImageInfoFromFileA' used by L"C:\\windows\\system32\\d3dx9_30.dll". If you are using builtin L"d3dx9_30.dll", try using the native one instead. err:module:find_forwarded_export function not found for forward 'd3dx8.D3DXGetImageInfoFromFileInMemory' used by L"C:\\windows\\system32\\d3dx9_36.dll". If you are using builtin L"d3dx9_36.dll", try using the native one instead. err:module:find_forwarded_export function not found for forward 'd3dx9_36.D3DXGetImageInfoFromFileInMemory' used by L"C:\\windows\\system32\\d3dx9_30.dll". If you are using builtin L"d3dx9_30.dll", try using the native one instead. err:module:import_dll Library WMVCore.DLL (which is needed by L"C:\\Program Files\\MindArk\\Entropia Universe\\Entropia.exe") not found and exits. Doing winetricks directx9 wmp10 gets around this. Entropia then puts up a window very briefly, then quits. If you then do winetricks vcrun2005sp1, you get bug 14137 (i.e. the app loads msvcp80 wrong and exits). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 16

[Bug 9548] New: pxtone: Can't save new project files (*.ptcop), or *.pttune
by wine-bugs＠winehq.org March 15, 2013

March 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=9548 Summary: pxtone: Can't save new project files (*.ptcop), or *.pttune Product: Wine Version: 0.9.44. Platform: Other URL: http://hp.vector.co.jp/authors/VA022293/pxtone.html OS/Version: other Status: UNCONFIRMED Severity: trivial Priority: P2 Component: wine-files AssignedTo: wine-bugs(a)winehq.org ReportedBy: trick(a)icculus.org Using pxtone (v 0.8.3.3), everything seems to work perfectly, *except* for saving a new .ptcop project file (also some d3d warnings in the terminal, but those seem harmless). Exporting to .pttune also doesn't work. Attempting to save either of these results in a dialog box titled "error" containing the text "open file". Interestingly, exporting to new .wav files works fine. (Wild shot in the dark, but could this be related to the filename extension of both .ptcop and .pttune being more than 3 chars?) Ran with freshly generated ~/.wine, and changing the emulated Windows version has no effect. Loading existing .ptcop files work fine. Saving to existing .ptcop files also work fine. Thus, the problem is only saving to new .ptcop files (and .pttune files) that doesn't already exist in the file system. (This also works fine in real Windows.) Using pxtone v 0.8.3.3, available from this page: <http://hp.vector.co.jp/authors/VA022293/pxtone.html> Steps to reproduce (works every time): 1. Download pxtone: <http://homepage2.nifty.com/rochet/storage/pxtone_0833.zip> 2. Delete japanese.ico to enable english mode 3. Run the program, go to File->Save project or File->Save project as 4. Enter a new filename, click save 5. Watch error dialog pop up -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 15

[Bug 14185] New: Wine 1.0 networking issues - /proc/net/route doesn't exit on Solaris hosts.
by wine-bugs＠winehq.org March 11, 2013

March 11, 2013

http://bugs.winehq.org/show_bug.cgi?id=14185 Summary: Wine 1.0 networking issues - /proc/net/route doesn't exit on Solaris hosts. Product: Wine Version: 1.0.0 Platform: Sun OS/Version: Solaris Status: UNCONFIRMED Severity: major Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: cmihai(a)boreas.ro Applications running in Wine 1.0 on Solaris hosts don't have any networking support. Wine attempts to use /proc/net/route to count route entries. There is no such thing on Solaris hosts. Instead, it should use something like netstat -rn. Behaviour: err:iphlpapi:getNumWithOneHeader Unable to open '/proc/net/route' to count entries! err:iphlpapi:getRouteTable unimplemented! To test this, I have created a /route file with a similar syntax to Linux /proc/net/route: cthulhu% cat /route Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT iwk00 00000000 0001A8C1 0003 0 0 0 00000000 0 0 0 And have modified wine sources by replacing /proc/net/route with /route in dlls/iphlpapi/ipstats.c After recompiling wine, I was able to run applications like EVE and connect to the Internet. Anyway, atm this is just a poor hackjob. It should not use /proc/net on non-Linux hosts at all. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 13187] New: Apps hang on startup in X11DRV_CritSection
by wine-bugs＠winehq.org March 11, 2013

March 11, 2013

http://bugs.winehq.org/show_bug.cgi?id=13187 Summary: Apps hang on startup in X11DRV_CritSection Product: Wine Version: 1.0-rc1 Platform: Sun OS/Version: Solaris Status: UNCONFIRMED Severity: critical Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: laurent(a)elanor.org Created an attachment (id=13005) --> (http://bugs.winehq.org/attachment.cgi?id=13005) Wine console output Hello, Since a few versions ago, Adobe Reader installers do not start anymore, blocking on thread errors. They used to work on version 0.9.54. I built Wine each time using the same ./configure options. The wine processes are stuck, but they do not die, they stay in memory, not showing. My system is Sun Solaris 10 U3, with patches. The compiler is Solaris' GCC 3.4.3. Attached is the console output and the list of processes I used the following to configure: export PATH=/usr/bin:/usr/ccs/bin:/usr/sfw/bin:/opt/csw/bin:/opt/fontforge/bin SHELL=/bin/bash \ CPPFLAGS='-I/usr/sfw/include -I/usr/X11/include -I/opt/csw/include' \ LDFLAGS='-lm -L/usr/sfw/lib -L/usr/X11/lib -L/opt/csw/lib -R/usr/sfw/lib -R/usr/X11/lib -R/opt/csw/lib' \ ./configure --prefix=/opt/wine-1.0-rc1 \ --without-alsa \ --without-audioio \ --without-capi \ --without-cms \ --without-coreaudio \ --without-esd \ --without-gphoto \ --without-hal \ --without-jack \ --without-ldap \ --without-nas \ --without-opengl \ --without-oss \ --without-sane gmake depend gmake -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 13227] New: 100% CPU Usage with notepad - with dtrace output
by wine-bugs＠winehq.org March 11, 2013

March 11, 2013

http://bugs.winehq.org/show_bug.cgi?id=13227 Summary: 100% CPU Usage with notepad - with dtrace output Product: Wine Version: 0.9.61. Platform: Sun OS/Version: Solaris Status: UNCONFIRMED Severity: major Priority: P2 Component: wineserver AssignedTo: wine-bugs(a)winehq.org ReportedBy: mritun(a)gmail.com Created an attachment (id=13061) --> (http://bugs.winehq.org/attachment.cgi?id=13061) DTrace stacktrace of most often executed functions wineserver is consuming 100% of CPU while running any application. I have created a test-case with notepad provided with wine. This bug is reproducible every time. The system is openSolaris build 84 (nevada SXCE build 84). Specifics are as following: $ WINEDEBUG=-all wine notepad $ wine --version wine-0.9.61 $ uname -a SunOS spot 5.11 snv_84 i86pc i386 i86pc CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ RAM: 2 GB DDR2 (single channel 2 GB x 1) The dtrace script I used to create the backtrace log of where the "wineserver" process is spending most of its time is as following: # cat wine.d #!/usr/sbin/dtrace -s pid14618:wineserver:: { @[ustack()] = count(); } -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 6

[Bug 10795] New: UI-view32.exe does not show maps on screen
by wine-bugs＠winehq.org March 9, 2013

March 9, 2013

http://bugs.winehq.org/show_bug.cgi?id=10795 Summary: UI-view32.exe does not show maps on screen Product: WineHQ Bugzilla Version: unspecified Platform: PC URL: http://www.ui-view.org/ OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P1 Component: bug list AssignedTo: jnewman(a)codeweavers.com ReportedBy: jpgrohn(a)gmail.com Created an attachment (id=9654) --> (http://bugs.winehq.org/attachment.cgi?id=9654) Console texts When starting UI-view32.exe, program starts ok, but map view is black. Map can see very short time and then view goes black. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10

[Bug 11043] New: Black screen after laucnhing domo
by wine-bugs＠winehq.org March 9, 2013

March 9, 2013

http://bugs.winehq.org/show_bug.cgi?id=11043 Summary: Black screen after laucnhing domo Product: Wine Version: 0.9.52. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: test AssignedTo: wine-bugs(a)winehq.org ReportedBy: feydreva(a)lsu.fr Created an attachment (id=10046) --> (http://bugs.winehq.org/attachment.cgi?id=10046) Logs from the winterm When I launch DOMO, Wine crashe jsut after the Splash screen. I hear the sound, but have a black screen. Last driver fomr nvidia are installed and DirectX9 is installed, DXDiag reports no errors -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 24

[Bug 10303] New: WMA playing
by wine-bugs＠winehq.org March 6, 2013

March 6, 2013

http://bugs.winehq.org/show_bug.cgi?id=10303 Summary: WMA playing Product: Wine Version: 0.9.45. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: test AssignedTo: wine-bugs(a)winehq.org ReportedBy: adam050986(a)yahoo.fr Created an attachment (id=8952) --> (http://bugs.winehq.org/attachment.cgi?id=8952) wma log from test-drive 6 It seems to be impossible to load WMA files with wine. All game using these won't get music and/or sound effect. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 12908] New: Battle Zone I does not start.
by wine-bugs＠winehq.org Feb. 15, 2013

Feb. 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=12908 Summary: Battle Zone I does not start. Product: Wine Version: 0.9.59. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: neptunia(a)mail.ru Created an attachment (id=12620) --> (http://bugs.winehq.org/attachment.cgi?id=12620) The console output for "software" mode The game displays a question, in which mode to start: software or hardware. Any answer results in a black screen. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 15