January 2009 - Wine-Bugs - list.winehq.org

[Bug 15256] New: Disabling OpenGL output in WinUAE causes crash, possibly in x11drv_main
by wine-bugs＠winehq.org Jan. 26, 2021

Jan. 26, 2021

http://bugs.winehq.org/show_bug.cgi?id=15256 Summary: Disabling OpenGL output in WinUAE causes crash, possibly in x11drv_main Product: Wine Version: 1.1.4 Platform: Other OS/Version: other Status: UNCONFIRMED Severity: minor Priority: P2 Component: winex11.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: markk(a)clara.co.uk Created an attachment (id=16046) --> (http://bugs.winehq.org/attachment.cgi?id=16046) Console output on crash WinUAE is an open source (GPL) emulator of Amiga computers, available from http://www.winuae.net/. The output of WinUAE can be rendered using DirectDraw (default), Direct3D or OpenGL. If WinUAE is set to use OpenGL, disabling the output filter (which reverts to DirectDraw output) causes WinUAE to crash. The console output on crashing begins: fixme:dbghelp:dump_system_info fill in CPU vendorID and feature set err:ntdll:RtlpWaitForCriticalSection section 0x7d1da4c0 "x11drv_main.c: X11DRV_CritSection" wait timed out in thread 0019, blocked by 0009, retrying (60 sec) wine: Unhandled page fault on read access to 0x000005e0 at address 0x7edfcaa9 (thread 0009), starting debugger... To demonstrate: - Run WinUAE - Select a disk image for drive DF0: in the Floppy drives page, e.g. rsi1.adf.gz from ftp://ftp.coresystems.de/pub/uae/rsi1.adf.gz - In the filter page, check the Enable box and select the OpenGL filter. - Click OK to start the emulation. - After a few seconds press F12 to bring up the settings window. - In the Filter page, uncheck the Enable box. - To work around Wine bug 10643, click in the main window and press F12. - Click OK to dismiss the settings window. WinUAE crashes. Attached is the console output on crashing. I can attach a minidump file if needed. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13

[Bug 14132] New: Incorrect Font Displayed After Install
by wine-bugs＠winehq.org Jan. 24, 2021

Jan. 24, 2021

http://bugs.winehq.org/show_bug.cgi?id=14132 Summary: Incorrect Font Displayed After Install Product: Wine Version: 1.0.0 Platform: PC URL: see Description OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: gdi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: pbronline-wine(a)yahoo.co.uk Occurs with Corel WordPerfect Office X3 and WordPerfect Office 12. Start installer. Note font (print snapshot or whatever). Install application, Quit installer. Start installer again. Font displayed is different. With WordPerfect Office X3, the effect is obvious as the 'wrong' font is a symbol font. With WordPerfect Office 12, the 'wrong' font is very narrow (I think this may have previsouly been reported as <<poor rendering>>). Problem affects not just the installers but also service packs and the applications themselves (particularly Presentations). I would expect it affects all installed applications. To confirm the problem ... 1. remove all references to Corel installed fonts from system.reg which ever way you choose but the following works: cd .wine mv system.reg system.reg~ sed -e '/TrueType.*C:.*\.TTF/d' -e '/TrueType.*C:.*\.ttf/d' system.reg~ > system.reg 2. move Corel installed fonts to one side for a moment: mv drive_c/windows/Fonts drive_c/windows/Fonts.wpo mkdir drive_c/windows/Fonts 3. Start installer. Font is back to what is was before installation. Quit installer. 3. Put back a bad font: cp -p drive_c/windows/Fonts.wpo/WPCO03N_.TTF drive_c/windows/Fonts 4. Start installer. Symbol font makes screen indecypherable. 5. Try other fonts. Not all override the 'good' font. MTEXTRA.TTF and WPHV04N_.TTF do. Downloads ? WordPerfect Office X3: http://www.corel.com/servlet/Satellite?pagename=uk/ProcessLayout&lc=en&ppg=… Professional (aka not Trial) Edition is 'fun' to install. See bug 14106. WordPerfect Office 12: Not available for download anymore as far as I can tell. Perhaps one of the nice people who contributed to bug 2547 can help. Standard (aka not Trial) Edition installs nicely under Wine 1.0. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 10

[Bug 11081] New: Windows Genuine Advantage Tool crashes on launch
by wine-bugs＠winehq.org Jan. 24, 2021

Jan. 24, 2021

http://bugs.winehq.org/show_bug.cgi?id=11081 Summary: Windows Genuine Advantage Tool crashes on launch Product: Wine Version: 0.9.52. Platform: Other URL: http://www.microsoft.com/genuine/downloads/Validate.aspx ?displaylang=en&sGuid=68d69b53-5057-4179-b72b- dfb1e12854f2 OS/Version: other Status: NEW Keywords: download, Installer Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: austinenglish(a)gmail.com Created an attachment (id=10101) --> (http://bugs.winehq.org/attachment.cgi?id=10101) Terminal output in wine 0.9.52 Windows Genuine Advantage Tool crashes on launch. While obviously not a very important program to us, it should still run (and fail validation). Backtrace attached. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

2 4

[Bug 13925] New: Ikea home planer 2D and 3D graphical views show only garbage
by wine-bugs＠winehq.org Jan. 24, 2021

Jan. 24, 2021

http://bugs.winehq.org/show_bug.cgi?id=13925 Summary: Ikea home planer 2D and 3D graphical views show only garbage Product: Wine Version: 1.0-rc4 Platform: PC URL: http://www.ikea.com/ms/de_DE/rooms_ideas/splashplanners. html OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: wine(a)zorglub.s.bawue.de Created an attachment (id=14043) --> (http://bugs.winehq.org/attachment.cgi?id=14043) section of .xsession-errors while IPH was running. Hello, the actual version of Wine is 1.0-rc5 but it's not listed yet. This bug is related to test http://appdb.winehq.org/objectManager.php?sClass=version&iId=11720&iTesting… There is not much to add to what I've written there actually, so copy&paste: Application installs and starts, but all graphical views are completely garbled (2D and 3D, like a TV without channel), the menus and icons seem to work and do something but I can't see anything. # Graphical configuration Section "Device" Identifier "Intel Corporation 82Q963/Q965 Integrated Graphics Controller" Driver "intel" BusID "PCI:0:2:0" EndSection # glxinfo [...] direct rendering: Yes [...] OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) 965Q 4.1.3002 x86/MMX/SSE2 OpenGL version string: 1.4 Mesa 7.0.3-rc2 [...] I also attach my .xsession-errors (the part related to when the Ikea program was running. Let me know if you need more. Thanks, Eric -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 22

[Bug 11970] New: graphic bug with 0.9. 57 in serius sam - the second encounter
by wine-bugs＠winehq.org Jan. 16, 2021

Jan. 16, 2021

http://bugs.winehq.org/show_bug.cgi?id=11970 Summary: graphic bug with 0.9.57 in serius sam - the second encounter Product: Wine Version: 0.9.57. Platform: Other OS/Version: other Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: jb.faq(a)gmx.de Created an attachment (id=11299) --> (http://bugs.winehq.org/attachment.cgi?id=11299) graphic bug: a look throug hills Hi, with the new version 0.9.57 of wine the graphic rendering in Serious Sam - The Second encounter breaks. You can look through hills, walls or the earth. I'll upload a screeshot in some few minutes, because it describe the error in the best way. Greetings Jan -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 82

[Bug 16879] New: .NET 3.0: XPSEPSC installer fails due to unimpl kernel32.RtlCaptureStackBackTrace
by wine-bugs＠winehq.org Jan. 8, 2021

Jan. 8, 2021

http://bugs.winehq.org/show_bug.cgi?id=16879 Summary: .NET 3.0: XPSEPSC installer fails due to unimpl kernel32.RtlCaptureStackBackTrace Product: Wine Version: 1.1.12 Platform: Other URL: http://www.microsoft.com/downloads/details.aspx?FamilyID =10cc340b-f857-4a14-83f5-25634c3bf043 OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: kernel32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: focht(a)gmx.net Hello, after getting past bug 16878 one runs into next one. Prerequisite: 1. clean WINEPREFIX 2. sh winetricks -q dotnet20 3. download .NET 3.0 Framework installer from: http://download.microsoft.com /download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe (sha1sum: a566bcd2ffffc3842a95adc57f7df3f8cd11577f) 4. export _SFX_CAB_SHUTDOWN_REQUEST=1 (workaround, see bug 9158) 5. wine ./dotnetfx3setup.exe It might take a while until all required packages are downloaded using BITS. Note: If you need to redo steps, backup the directory "dotnetfx304506.30" from "c:\\windows\\temp" to a different location, remove ~/.wine, copy "dotnetfx304506.30" again to "c:\\windows\\temp" to prevent BITS from downloading over and over again. --- snip --- fixme:advapi:RegisterEventSourceW ((null),L"Microsoft-Windows-SpoolerFilterPipelineSVC"): stub fixme:winspool:OpenPrinterW PRINTER_DEFAULTS ignored => (null),(nil),0x00000001 fixme:winspool:AddPrinterW DocumentPropertiesW on printer L"Microsoft XPS Document Writer" fails wine: Call from 0x105e0b0 to unimplemented function KERNEL32.dll.RtlCaptureStackBackTrace, aborting wine: Unimplemented function KERNEL32.dll.RtlCaptureStackBackTrace called at address 0x105e0b0 (thread 0014), starting debugger... Unhandled exception: unimplemented function KERNEL32.dll.RtlCaptureStackBackTrace called in 32-bit code (0x7bc485e6). Register dump: CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b EIP:7bc485e6 ESP:0033ef1c EBP:0033ef70 EFLAGS:00000216( - 00 - IAP1) EAX:0033ef1c EBX:7bc9b830 ECX:0034002d EDX:007d3e0c ESI:0033f7cc EDI:007d3e18 Stack dump: 0x0033ef1c krb5_rc_dfl_init+0xfc: 80000100 00000001 00000000 0105e0b0 0x0033ef2c krb5_rc_dfl_init+0x10c: 00000002 010957de 01095722 60143151 0x0033ef3c krb5_rc_dfl_init+0x11c: 00110000 7bc9b830 00000000 00000000 0x0033ef4c krb5_rc_dfl_init+0x12c: 00000064 7bc43fe6 00000000 7bc6ebc4 0x0033ef5c krb5_rc_dfl_init+0x13c: 0033efc4 60145124 00000040 7bc6ed4d 0x0033ef6c krb5_rc_dfl_init+0x14c: 007d1288 0033efa4 0034003c 010957de Backtrace: =>0 0x7bc485e6 stub_entry_point+0x4b(dll="KERNEL32.dll", name="RtlCaptureStackBackTrace", ret_addr=0x105e0b0) [/opt/wine/wine-git/dlls/ntdll/loader.c:192] in ntdll (0x0033ef70) 1 0x0034003c in libkrb5.so.3 (+0x7503c) (0x0033efa4) 2 0x0105dbeb in printfilterpipelinesvc (+0x5dbeb) (0x0033efb4) 3 0x0105de7c in printfilterpipelinesvc (+0x5de7c) (0x0033f1dc) 4 0x0105e036 in printfilterpipelinesvc (+0x5e036) (0x0033f1fc) 5 0x0101cfb3 in printfilterpipelinesvc (+0x1cfb3) (0x0033fc34) 6 0x0101d020 in printfilterpipelinesvc (+0x1d020) (0x0033fd28) 7 0x0101dab1 in printfilterpipelinesvc (+0x1dab1) (0x0033fd6c) 8 0x0101be04 in printfilterpipelinesvc (+0x1be04) (0x0033fd94) 9 0x0101be76 in printfilterpipelinesvc (+0x1be76) (0x0033fdb0) 10 0x0101bf7f in printfilterpipelinesvc (+0x1bf7f) (0x0033fdd0) 11 0x0101e133 in printfilterpipelinesvc (+0x1e133) (0x0033fef8) 12 0x7b87ebd0 start_process+0xe4(arg=(nil)) [/opt/wine/wine-git/dlls/kernel32/process.c:904] in kernel32 (0x0033ffe8) ... 00000025 (D) C:\windows\system32\unknown\PrintFilterPipelineSvc.exe --- snip --- In case you are wondering about "unknown" in path, Wine doesn't know about directory id 55 which is printer processor directory. Although it might deserve its own bug I mention it here: --- snip --- 0045:fixme:setupapi:create_system_dirid unknown dirid 55 --- snip --- That whole print processor stuff needs to be tackled separately. --- snip --- 0032:Call KERNEL32.CopyFileW(0033f814 L"C:\\3e0c51033dbb7684e997f131b3146a\\update\\..\\i386\\filterpipelineprintproc.dll",0033fa1c L"C:\\windows\\system32\\spool\\prtprocs\\w32x86\\filterpipelineprintproc.dll",00000000) ret=0101cf79 0032:Ret KERNEL32.CopyFileW() retval=00000001 ret=0101cf79 0032:Call winspool.drv.AddPrintProcessorW(00000000,01002388 L"Windows NT x86",01001f9c L"filterpipelineprintproc.dll",01001fd4 L"MS_XPS") ret=0101d032 0032:fixme:winspool:AddPrintProcessorW ((null),L"Windows NT x86",L"filterpipelineprintproc.dll",L"MS_XPS"): stub 0032:Ret winspool.drv.AddPrintProcessorW() retval=00000000 ret=0101d032 --- snip --- There are several issues, though I leave them alone for now ... --- After adding RtlCaptureStackBackTrace() forward to kernel32.spec and adding stub to ntdll (FIXME params + returning STATUS_NOT_IMPLEMENTED), the crash is prevented. Regards -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 16906] New: .NET 3.0: XPSEPSC installer copies print processor files to wrong directory (setupapi unhandled dirid 55)
by wine-bugs＠winehq.org Jan. 8, 2021

Jan. 8, 2021

http://bugs.winehq.org/show_bug.cgi?id=16906 Summary: .NET 3.0: XPSEPSC installer copies print processor files to wrong directory (setupapi unhandled dirid 55) Product: Wine Version: 1.1.12 Platform: Other OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: setupapi AssignedTo: wine-bugs(a)winehq.org ReportedBy: focht(a)gmx.net Hello, I mentioned this in bug 16879 and before the issue gets lost... Wine doesn't know about directory id 55 which is print processor directory. --- snip --- ... 00c4:fixme:setupapi:create_system_dirid unknown dirid 55 00c4:Call KERNEL32.GetSystemDirectoryW(00000000,00000000) ret=789dacd1 00c4:Ret KERNEL32.GetSystemDirectoryW() retval=00000014 ret=789dacd1 ... 00c4:Call KERNEL32.lstrlenW(0015ab20 L"C:\\windows\\system32\\unknown") ret=789ecb4c ... 00c4:Call KERNEL32.CreateFileA(006f26f0 "c:\\windows\\system32\\unknown\\printfilterpipelinesvc.exe",80000000,00000003,00000000,00000003,08000000,00000000) ret=0106825d ... --- snip --- --- snip dlls/setupapi/dirid.c --- /* create the string for a system dirid */ static const WCHAR *create_system_dirid( int dirid ) { ... case DIRID_PRINTPROCESSOR: /* FIXME */ default: FIXME( "unknown dirid %d\n", dirid ); return get_unknown_dirid(); } ... } --- snip dlls/setupapi/dirid.c --- GetPrintProcessorDirectoryW() should provide all required information. With patch applied: --- snip --- ... 0031:Call KERNEL32.CopyFileW(0015b310 L"c:\\10976f8595cea39afb\\PrintFilterPipelineSvc.exe",0015cb70 L"C:\\windows\\system32\\spool\\prtprocs\\w32x86\\PrintFilterPipelineSvc.exe",00000000) ret=60afb0c9 --- snip --- Regards -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 6

[Bug 16878] New: .NET 3.0: XPSEPSC installer fails due to missing ntoskrnl.exe placeholder and version resource
by wine-bugs＠winehq.org Jan. 8, 2021

Jan. 8, 2021

http://bugs.winehq.org/show_bug.cgi?id=16878 Summary: .NET 3.0: XPSEPSC installer fails due to missing ntoskrnl.exe placeholder and version resource Product: Wine Version: 1.1.12 Platform: Other URL: http://www.microsoft.com/downloads/details.aspx?FamilyID =10cc340b-f857-4a14-83f5-25634c3bf043 OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: ntoskrnl AssignedTo: wine-bugs(a)winehq.org ReportedBy: focht(a)gmx.net Hello, NOTE: bug 16875 which covers two issues in setupapi.SetupGetTargetPathW needs to be properly fixed for *both* cases, see "update.inf" snippet which is part of this bug report. After bug 16875 (and 16876) are fixed, the installer fails: "c:\\windows\\temp\\dd_dotnetfx3error.txt": --- snip --- [01/11/09,11:36:24] Microsoft .NET Framework 2.0: [2] Error: Installation failed for component Microsoft .NET Framework 2.0. MSI returned error code 1603 [01/11/09,11:36:37] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0 is not installed. [01/11/09,11:36:37] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed. --- snip --- "c:\\windows\\temp\\dd_dotnetfx3install.txt": --- snip --- [01/11/09,11:36:37] WapUI: Return for RGB Rast indicates a successful installation. DepCheck indicates the component is installed. [01/11/09,11:36:37] WapUI: Return for MSXML 6.0 Parser indicates a successful installation. DepCheck indicates the component is installed. [01/11/09,11:36:37] WapUI: Return for WIC Installer indicates a successful installation. DepCheck indicates the component is installed. [01/11/09,11:36:37] WapUI: DepCheck indicates Microsoft .NET Framework 2.0 is not installed. --- snip --- Obviously bug 12401 (which I have analyzed in bug 10601). So the prerequisite expands. 1. clean WINEPREFIX 2. sh winetricks -q dotnet20 3. download .NET 3.0 Framework installer from: http://download.microsoft.com /download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe (sha1sum: a566bcd2ffffc3842a95adc57f7df3f8cd11577f) 4. export _SFX_CAB_SHUTDOWN_REQUEST=1 (workaround, see bug 9158) 5. wine ./dotnetfx3setup.exe It might take a while until all required packages are downloaded using BITS. Note: If you need to redo steps, backup the directory "dotnetfx304506.30" from "c:\\windows\\temp" to a different location, remove ~/.wine, copy "dotnetfx304506.30" again to "c:\\windows\\temp" to prevent BITS from downloading over and over again. After applying prerequisite the installer fails again: "c:\\windows\\temp\\dd_dotnetfx3error.txt": --- snip --- [01/11/09,11:53:13] XPSEPSC x86 Installer: [2] Error code 1603 for this component means "ERROR_INSTALL_FAILURE " [01/11/09,11:53:13] XPSEPSC x86 Installer: [2] Setup Failed on component XPSEPSC x86 Installer [01/11/09,11:53:24] WapUI: [2] DepCheck indicates XPSEPSC x86 Installer is not installed. --- snip --- "c:\\windows\\temp\\dd_XPS.txt": --- snip --- [dd_XPS.txt] 0.007: ================================================================================ 0.008: 2009/01/11 11:53:12.167 (local) 0.009: C:\a71b96a363115310c46014e60bbc1d36\update\update.exe (version 6.2.29.0) 0.009: Hotfix started with following command line: /quiet /norestart /log:C:\windows\temp\dd_XPS.txt 0.009: GetKernelType: GetInternalFilename failed 0.552: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with error 0x2 0.552: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed with error 0x2 0.552: DoInstallation: CleanPFR failed: 0x2 0.553: SetProductTypes: InfProductBuildType=BuildType.IP 0.554: SetAltOsLoaderPath: No section uses DirId 65701; done. 0.554: RegisterDll: Executing command line: "C:\windows\system32\regsvr32.exe" /s "C:\windows\system32\licdll.dll" ... 0.634: RegisterDll: Exit code=0x00000001 0.634: RegisterDll: Executing command line: "C:\windows\system32\regsvr32.exe" /s "C:\windows\system32\regwizc.dll" ... 0.712: RegisterDll: Exit code=0x00000001 0.713: Unexpected Error While Executing Line 1 ( Condition.Requirement ) of W2K.Condition 0.713: ExConditionalEvaluateSection: Syntax error in 'Condition' key of section W2K.Condition. 0.713: DoInstallation: Error 0xf00c while evaluating extended conditional section [ProductInstall.ExtendedConditional]. 0.713: CleanupTrustedInfFile: GetFileAttributes for C:\windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\update.cat failed: 0x2 0.714: The XpsEPSC c:\a71b96a363115310c46014e60bbc1d36\update\update.inf file is not correct. 0.714: Update.exe extended error code = 0xf00c 0.714: Update.exe return code was masked to 0x643 for MSI custom action compliance. --- snip --- Relevant "update.inf": --- snip --- ... [ProductInstall.ExtendedConditional] ConditionInstall=W2K.Condition [W2K.Condition] Condition = SingleOp, Condition.Requirement ConditionalOperations=Install.Not2k [Condition.Requirement] GreatOrEqualOp=CheckFilever, System32.files, ntoskrnl.exe, >=, 5.1.0.0 ... [DestinationDirs] Copy.System32=11 Copy.System32.not2k=11 Copy.PrintProc=55 Copy.dllcache=65619 Copy.dllcache.not2k=65619 --- snip --- Adding version resource to ntoskrnl.exe alone is not sufficient, a placeholder needs to be present in system32: --- snip --- 0028:Call KERNEL32.FindFirstFileA(0033ac3c "C:\\windows\\system32\\ntoskrnl.exe",0033a18c) ret=0106da6d 0028:Ret KERNEL32.FindFirstFileA() retval=ffffffff ret=0106da6d 0028:Call KERNEL32.GetLastError() ret=0106b894 0028:Ret KERNEL32.GetLastError() retval=00000002 ret=0106b894 ... 0028:Call msvcrt._vsnprintf(0033a967,000007f7,01027e3c "Unexpected Error While Executing Line %d ( %ws ) of %ws \n",0033b198) ret=0106b900 --- snip --- After fixing this problem the condition is satisfied. Regards -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 15

[Bug 11661] New: Confusing error message when executing application on noexec fs
by wine-bugs＠winehq.org Jan. 1, 2021

Jan. 1, 2021

http://bugs.winehq.org/show_bug.cgi?id=11661 Summary: Confusing error message when executing application on noexec fs Product: Wine Version: 0.9.55. Platform: All OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: ntoskrnl AssignedTo: wine-bugs(a)winehq.org ReportedBy: liquid.acid(a)gmx.net Hi there, I'm suggesting to make some checks prior to loading and executing applications. The problem I encountered yesterday was that when trying to start applications from a filesystem with the noexec parameter enabled the whole app pagefaults. That was really my mistake because I accidentally changed some lines in the fstab after changing the encryption engine of my system. I only have the exec parameter enabled on the games filesystem, all other data filesystem don't have it enabled. It would be a good thing to output a somehow more informative error message when such a configuration is encountered (executing code from noexec fs). I suggest this because I was quite confused seeing the application to pagefault that was running two days ago (and I didn't do any package updates in these two days). Thanks, Tobias -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 23

[Bug 14025] New: Heroes of Might Magic V: camera does not move well
by wine-bugs＠winehq.org Dec. 31, 2020

Dec. 31, 2020

http://bugs.winehq.org/show_bug.cgi?id=14025 Summary: Heroes of Might Magic V: camera does not move well Product: Wine Version: unspecified Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P5 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: mkstoyanov(a)hotmail.com Heroes of Might and Magic V (original) and HOMMV: Hammers of Fate, on should be able to swing the camera left and right by pressing the right mouse button and move the mouse. It works under windows. In wine (9.58 on, until 1.0 inclusive) the camera moves only barely, in order to make a 90 degree change of view, I need to swipe the mouse over the pad several time, in windows I can make 180 with half a pad. The game has no mouse sensitivity option. (camera moves normally from the keyboard, so the game still plays OK) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 44