June 2009 - Wine-Bugs - list.winehq.org

[Bug 11832] New: App scans folders with charts but fails to display them
by wine-bugs＠winehq.org Oct. 6, 2016

Oct. 6, 2016

http://bugs.winehq.org/show_bug.cgi?id=11832 Summary: App scans folders with charts but fails to display them Product: Wine Version: 0.9.56. Platform: PC URL: http://rosepointnav.com/CoastalExplorer/Trial/default.ht m OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: n5470(a)pinefields.com As part of normal startup, Coastal Explorer (CE) scans designated (either by default or user choice) specific folders within all drives, building an XML document with descriptions of each chart found. At the end of the process, however, CE announces there are no charts to be found and asks if the user wants to download charts from web sites. It was found that interrupting the scan process (there is a "Stop" button available) will make charts visible and usable. This is, however, a rather inelegant solution and one which poses problems when using the "Chart Portfolio" tool (e.g., duplication of charts). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 18

[Bug 18800] New: Debugger goes into race condition after 123 crash on bug 18324
by wine-bugs＠winehq.org Oct. 5, 2016

Oct. 5, 2016

http://bugs.winehq.org/show_bug.cgi?id=18800 Summary: Debugger goes into race condition after 123 crash on bug 18324 Product: Wine Version: 1.1.23 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: dbghelp AssignedTo: wine-bugs(a)winehq.org ReportedBy: ToddAndMargo(a)verizon.net Hi All, Please reference bug 18324 on this bug. This is bug is on the debugger and 18324 in on Lotus 123. Basically, when you try to copy from two cell into the clip board in Lotus 123, 123 will crash (bug 18324). And, the debugger goes into a race condition, eating up as much CPU as the OS will give it. It never finished. The only way to stop the race is tho do a "kill -9" on 123's process ID. -T Steps to reproduce: 1) open the 123 attachment on 18324 (http://bugs.winehq.org/attachment.cgi?id=20865) 2) highlight across two cell horizontally 3) press <ctrl><c> or go to "Edit", "Copy" -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 15

[Bug 10886] New: RTS_CONTROL_TOGGLE doesn't work
by wine-bugs＠winehq.org Sept. 25, 2016

Sept. 25, 2016

http://bugs.winehq.org/show_bug.cgi?id=10886 Summary: RTS_CONTROL_TOGGLE doesn't work Product: Wine Version: 0.9.51. Platform: All OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: wine-ports AssignedTo: wine-bugs(a)winehq.org ReportedBy: bugzilla(a)tut.by in WINE, setting DCB.fRtsControl to RTS_CONTROL_TOGGLE and doing SetCommState() sets RTS line always high. (btw, this is the same as described to be bug in win95, see http://support.microsoft.com/kb/140030 ). According to MSDN, RTS should be set to high before data transmission, then data should be sent, and then RTS should go back to low. The workaround is to toggle RTS manually. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 14

[Bug 18887] New: document is solid black during drag-select in PowerPoint 2007
by wine-bugs＠winehq.org Sept. 25, 2016

Sept. 25, 2016

http://bugs.winehq.org/show_bug.cgi?id=18887 Summary: document is solid black during drag-select in PowerPoint 2007 Product: Wine Version: 1.1.23 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: paint007(a)cs.duke.edu In PowerPoint 2007, when doing a drag-select (clicking and dragging the mouse cursor to select items on the page), the document goes solid black, making it impossible to see which objects are currently in the selection rectangle. When run using winedbg, this fixme appears during drag-select operations, seems relevant: fixme:xrender:X11DRV_AlphaBlend Ignoring SourceConstantAlpha 176 for AC_SRC_ALPHA Found this link to a possible patch, but have not yet installed all of the libraries necessary to build and test: http://www.winehq.org/pipermail/wine-patches/2008-June/056030.html -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 37

[Bug 11991] New: Wine Windows OpenGL support regression
by wine-bugs＠winehq.org Sept. 18, 2016

Sept. 18, 2016

http://bugs.winehq.org/show_bug.cgi?id=11991 Summary: Wine Windows OpenGL support regression Product: Wine Version: 0.9.57. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: critical Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: imamdxl8805(a)yahoo.com Dear Wine developers, This is wine version 0.9.56 and 0.9.57 There are two games that support OpenGL rendering as well as Direct3D redering. Here are the games: 1. Hitmen 2 Silent Assasin 2. Hitmen 3 Contracts When I have updated my wine version to 0.9.57, then these games are not playing anymore with OpenGL rendering. But when I start these games with Direct3D rendering they are playing fine. These games played properly with wine version 0.9.55 with OpenGL rendering as well as Direct3D rendering. Then I have decided to reinstall wine 0.9.55. Sorry for the err message printed in the command line. Because I do not have Internet connection in my home PC. Best regards, DXL -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 38

[Bug 10643] New: WInUAE settings window reappears after being dismissed
by wine-bugs＠winehq.org Sept. 16, 2016

Sept. 16, 2016

http://bugs.winehq.org/show_bug.cgi?id=10643 Summary: WInUAE settings window reappears after being dismissed Product: Wine Version: 0.9.50. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: wine-user AssignedTo: wine-bugs(a)winehq.org ReportedBy: markk(a)clara.co.uk Hi, WinUAE is an open source (GPL) emulator of Amiga computers. After running WinUAE and starting the emulation, pressing F12 brings up the settings window. When this is dismissed by pressing Reset, Quit, Restart, OK, or Cancel, the window closes and reopens. It should not reopen. That repeats if you press one of those buttons again. If you press Quit, then Cancel a few times after the window closes and reopens, the program does eventually quit. Steps to demonstrate the problem: (Typical usage of WinUAE involves obtaining an Amiga ROM image file, however it is possible to use some software without.) - Download WinUAE 1.4.4 from http://www.winuae.net/. Direct URL for the installer is http://www.winuae.net/files/InstallWinUAE1440.exe - Run the installer. - For an example disk image, you can download e.g. ftp://ftp.coresystems.de/pub/uae/rsi1.adf.gz - Start WinUAE. The settings/configuration window appears. Click the "Floppy drives" entry in the left side of the window, then the "..." button for drive DF0:. Select the rsi1.adf.gz file. - Click Start to start emulation. - Press F12 to bring up the settings window. - Try to dismiss the window by pressing one of the buttons at the bottom. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 28

[Bug 16296] New: Activeworlds client 4.2 chat breaks after sending one message
by wine-bugs＠winehq.org Sept. 14, 2016

Sept. 14, 2016

http://bugs.winehq.org/show_bug.cgi?id=16296 Summary: Activeworlds client 4.2 chat breaks after sending one message Product: Wine Version: 1.1.9 Platform: Other URL: http://activeworlds.com/products/download.asp OS/Version: other Status: NEW Keywords: download Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com Do "winetricks vcrun6" to get missing redistributables (mfc42 and msvcp60), "winetricks wininet" if needed to work around bug 16292, and "winetricks directx9" if needed to work around bug 16293. Then send a chat message by typing in the chat window. ("Hello, is chat working?" is a good one to try :-) If somebody is around and friendly, they will reply, and you will see their reply above their head, but the chat window goes blank after you put in your first message. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 8

[Bug 11365] New: Total Annihilation: Kingdoms dies in fullscreen after selecting a game or graphic options from menu
by wine-bugs＠winehq.org Sept. 14, 2016

Sept. 14, 2016

http://bugs.winehq.org/show_bug.cgi?id=11365 Summary: Total Annihilation:Kingdoms dies in fullscreen after selecting a game or graphic options from menu Product: Wine Version: 0.9.54. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: directx-ddraw AssignedTo: wine-bugs(a)winehq.org ReportedBy: jamesp(a)ndsupernet.com Created an attachment (id=10472) --> (http://bugs.winehq.org/attachment.cgi?id=10472) output of wine using WINEDEBUG=warn+all, last 2 lines of the out put are probably the cause of the problem Running the game in fullscreen with winver set to 2000, the game dies when selecting graphics options from the main menu or launching any game. Setting winver to XP does the same thing, but also the intro movie and main menu don't look right in fullscreen, My gnome taskbar never gets covered up. Yet the game runs perfectly when using an emulated window. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 23

[Bug 17729] New: Trivial Pursuit Digital Choice does not detect the USB device game pod
by wine-bugs＠winehq.org Sept. 14, 2016

Sept. 14, 2016

http://bugs.winehq.org/show_bug.cgi?id=17729 Summary: Trivial Pursuit Digital Choice does not detect the USB device game pod Product: Wine Version: 1.1.17 Platform: PC URL: http://www.hasbro.com/trivialpursuit/tpchoice/default.cf m?page=Entertainment/Download OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: frail.knight(a)gmail.com The game pod is not detected when you hook it up by USB and run the application. Trivial Pursuit Digital Choice displays an error stating: "There was an error connecting to your handheld. Make sure it is plugged into your PC and it is powered on." Upon clicking ok it prompts you with another dialog box asking you to connect the handheld and click ok to try again. No amount of retrying leads to a solution. The program will continue to error and prompt you until you select cancel and the program exits. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 20

[Bug 15740] New: nullDC garbled screen with ATI cards (Radeon HD4870) and fglrx drivers
by wine-bugs＠winehq.org Sept. 14, 2016

Sept. 14, 2016

http://bugs.winehq.org/show_bug.cgi?id=15740 Summary: nullDC garbled screen with ATI cards (Radeon HD4870) and fglrx drivers Product: Wine Version: 1.1.6 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: milest3g(a)gmail.com Created an attachment (id=16834) --> (http://bugs.winehq.org/attachment.cgi?id=16834) Log Using an ATI card and fglrx 8.10 (the one in Ubuntu 8.10) nullDC starts, and the interface works, but starting the emulation (whether with a game or just the Dreamcast bios) results in a garbled window, while this error is repeated in the console : fixme:d3d_shader:shader_glsl_load_constants >>>>>>>>>>>>>>>>> GL_INVALID_OPERATION (0x502) from glUniform4fvARB @ glsl_shader.c / 445 In order to start the program, natives dll are needed: d3dx9_35 msvcp80 msvcr80 msvcr80d A screenshot has been submited at http://appdb.winehq.org/appimage.php?iId=20821 Attached is the output redirected to a log file. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 15