November 2010 - Wine-Bugs - list.winehq.org

[Bug 23689] New: Tomb Raider III screen resolution problem when not using virtual desktop mode
by wine-bugs＠winehq.org Jan. 14, 2014

Jan. 14, 2014

http://bugs.winehq.org/show_bug.cgi?id=23689 Summary: Tomb Raider III screen resolution problem when not using virtual desktop mode Product: Wine Version: 1.2-rc6 Platform: x86 URL: http://www.tombraiderchronicles.com/tr3/demo.html OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: markk(a)clara.co.uk This bug applies to the game Tomb Raider III, both the full game and downloadable trial) and the demo. It also applies to Tomb Raider III: The Lost Artifact. A time-limited trial and demos can be downloaded from http://www.tombraiderchronicles.com/tr3/demo.html The demo is about 13MB, the trial 202MB. I'd suggest testing with the "South Pacific" demo. There is a problem related to screen resolution when Wine is *not* in virtual desktop mode. The game sets the X desktop to the appropriate resolution (640x480, 1024x768 or whatever else you chose). But the game display size (in pixels) appears to be the full/highest X desktop resolution. So only the upper left part of the game display is visible on-screen, and in the case of a widescreen monitor, it is stretched horizontally. For example, my laptop screen is 1680x1050 pixels. The game seems to be rendering a 1680x1050-pixel display, but only the upper left 640x480 pixels would be visible on-screen. If instead I tell the game to use 1400x1050 resolution, then (since the vertical height matches) the game display is stretched so the rightmost part is off-screen. If testing with the demo or original CD, use winecfg to set Windows version to Windows 98, otherwise Wine reports: wine: Unhandled privileged instruction at address 0x48e2e1 (thread 001b), starting debugger... In Windows 98 mode, Wine reports instead err:int:__wine_emulate_instruction mov cr4,eax at 0x00496a41 which is non-fatal. The trial version does not have this problem. Alternatively, if testing with the original CD game, after installing it run the unofficial XP/Vista patch from http://www.tombraiderchronicles.com/cgi-bin/downloads2/dl.pl?fx_vista_trupd… Start the demo by doing wine Tomb3.exe /setup. For me, that opens a full-screen black window, and the Tomb Raider II Setup window appears behind it (so not visible). Alt-Tab to switch to the game setup window and choose a resolution, then click OK. Compare the in-game display with that when running with virtual desktop mode enabled. The only console output which might be (but probably isn't) relevant is: fixme:win:EnumDisplayDevicesW ((null),0,0x32f5d8,0x00000000), stub! fixme:d3d:swapchain_init Add OpenGL context recreation support to context_validate_onscreen_formats err:d3d7:IDirect3DDeviceImpl_7_SetRenderState Unhandled texture mag 0 ! err:d3d7:IDirect3DDeviceImpl_7_SetRenderState Unhandled texture min 0 ! In virtual desktop mode, the game resolution/rendering seems to work okay (including when the virtual desktop resolution is widescreen, e.g. 1440x900). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 23529] New: build mechanism tried to find an outdated 'lcms' version
by wine-bugs＠winehq.org Jan. 10, 2014

Jan. 10, 2014

http://bugs.winehq.org/show_bug.cgi?id=23529 Summary: build mechanism tried to find an outdated 'lcms' version Product: Wine Version: 1.2-rc6 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: build-env AssignedTo: wine-bugs(a)winehq.org ReportedBy: sergstesh(a)yahoo.com While running 'configure' I see these lines in its screen output: 154 checking lcms.h usability... no 155 checking lcms.h presence... no 156 checking for lcms.h... no 157 checking lcms/lcms.h usability... no 158 checking lcms/lcms.h presence... no 159 checking for lcms/lcms.h... no . According to http://sourceforge.net/projects/lcms/files/ at the moment the latest tarball is lcms2-2.0a.tar.gz and its header files (when installed) are: " sergei(a)amdam2:~/junk> ls -ltr /mnt/sdb8/sergei/AFSWD_debug/install/lcms-2.0/include/ total 117 -rw-r--r-- 1 qemu users 24622 2010-07-05 03:59 lcms2_plugin.h -rw-r--r-- 1 qemu users 91214 2010-07-05 03:59 lcms2.h sergei(a)amdam2:~/junk> ". I.e. configure should check for version 2.0 or later and check existence of 'lcms2.h' rather than 'lcms.h' file. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 21

[Bug 15738] New: Max Payne 2: Ingame windows rendered incorrect with nvts pipe
by wine-bugs＠winehq.org Jan. 10, 2014

Jan. 10, 2014

http://bugs.winehq.org/show_bug.cgi?id=15738 Summary: Max Payne 2: Ingame windows rendered incorrect with nvts pipe Product: Wine Version: 1.1.3 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: liquid.acid(a)gmx.net When using (or forcing) the nvts_fragment_pipeline implementation (directx.c), ingame windows are rendered incorrectly. Going to attach screenshots later. With the arbfp pipe rendering is correct, I didn't yet try with other pipes. Effect can be reproduced with the demo version. Start game and let cutscenes finish (wait until you gain control of the character), then take a look at the windows in the hospital room. With nvts they're completly transparent, nearly like they weren't even there. Recheck with arbfp and see how they should look like (you should see a "sprinkled-by-rain-from-outside" effect on them). Exit first room and look left for another window. It has the same issues, however I found out that it was possible to trigger correct rendering when the scene is rendered from a certain position (again going to do screenshots). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 26

[Bug 18465] New: url.dll FileProtocolHandler does not open URLs in browser.
by wine-bugs＠winehq.org Jan. 10, 2014

Jan. 10, 2014

http://bugs.winehq.org/show_bug.cgi?id=18465 Summary: url.dll FileProtocolHandler does not open URLs in browser. Product: Wine Version: 1.0.1 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: kempe.marcus(a)gmail.com The following call: wine rundll32 url.dll,FileProtocolHandler http://www.winehq.org/ does not open the wine homepage in my default browser, as is done in Windows. However, if i add the following 2 dlls from windows: url.dll iertutil.dll to my wine-installation, the the call works as expected. This leads me to believe that there might be a bug, or simply an unimplemented feature. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 16

[Bug 23343] New: application freeze because of problem with winevdm.exe
by wine-bugs＠winehq.org Jan. 6, 2014

Jan. 6, 2014

http://bugs.winehq.org/show_bug.cgi?id=23343 Summary: application freeze because of problem with winevdm.exe Product: Wine Version: unspecified Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: kwk(a)lavabit.com Created an attachment (id=29081) --> (http://bugs.winehq.org/attachment.cgi?id=29081) Debugging Output - Backtrace Hello, On: Ubuntu 10.04 lucid lynx i tried to run an old Windows application from 1995. It's called REBA, but this won't help much, because i suppose it is widely unknown. After starting the a pop-up tells about a severe problem with the application winevdm.exe The software freezes. I would be very grateful for any hint about this problem since I'm not a programmer but using this software without having to install MSWin is essential to me. attached a copy of the debugging output. regards WK -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 6

[Bug 19309] New: Mapsource crashes unexpectedly
by wine-bugs＠winehq.org Jan. 6, 2014

Jan. 6, 2014

http://bugs.winehq.org/show_bug.cgi?id=19309 Summary: Mapsource crashes unexpectedly Product: WineHQ Apps Database Version: unspecified Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: appdb-unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: arkaims(a)gmail.com OS: Ubuntu 9.04 Wine: Updated from Wine 1.0.1 to Wine 1.1.25 (unfortunately it does not solve the problem) Mapsource: 6.15.6 I have installed the Mapsource and after I have installed a set of mapsource maps I tried to execute the MapSource through Wine to see the maps. The program crashes - in the attachment I put the debug information. I really hope that somebody will solve the Mapsource issues - one for all, because it is really disappointing to have a GPS device, Maps and to be forced to buy a M$ OS, because the guys for Garmin do not fulfill the end-user requirements. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 16

[Bug 17960] New: Mapsource: Updater fails due to partially painted screen
by wine-bugs＠winehq.org Jan. 6, 2014

Jan. 6, 2014

http://bugs.winehq.org/show_bug.cgi?id=17960 Summary: Mapsource: Updater fails due to partially painted screen Product: Wine Version: 1.1.18 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: czimmer(a)wczimmerman.dyndns.org Debian Lenny for the OS. When trying to run the Mapsource updater to upgrade the successfully installed Mapsource from 6.12.x to 6.13.x or 6.15.x the installer extracts successfully but cannot proceed as it is waiting for the user to click "Next". The Next field is not drawn on the screen as shown at the following screenshot: http://i296.photobucket.com/albums/mm163/wczimmerman/Screenshot-MapSourceUp… The same behavior is seen with the stable version of wine available in the Lenny repo's: 1.1.0. There is no error on the console from the app. A Control-C kills it in the terminal. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10

[Bug 11660] New: display with error
by wine-bugs＠winehq.org Jan. 6, 2014

Jan. 6, 2014

http://bugs.winehq.org/show_bug.cgi?id=11660 Summary: display with error Product: Wine Version: 0.9.55. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: renaud(a)olgiati-in-paraguay.org Running the program gpsVPxp with a test map toto.img, i get the display as in http://www.aikidoparaguay.org/pics/gpsvpbug.jpg It seems the display engine blanks out a horizontal rectangular zone where text is to be displayed, even when the text is displayed at a squint. Communicated with the author of the app, who tells me that under Windows there is no blanking at all where text is displayed (which makes sense when displaying a map, you dont want to hide the map wahrever there is a text). Tha app can be downloaded at http://gpsvp.garminmapsearch.com/download/gpsVPxp.zip (no install, just unzip and execute) and a sample map showing the whiting-out of the image under texts at http://www.aikidoparaguay.org/pics/toto.img -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10

[Bug 11130] New: Total Annihilation multiplayer no longer works.
by wine-bugs＠winehq.org Jan. 6, 2014

Jan. 6, 2014

http://bugs.winehq.org/show_bug.cgi?id=11130 Summary: Total Annihilation multiplayer no longer works. Product: Wine Version: 0.9.52. Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-dplay AssignedTo: wine-bugs(a)winehq.org ReportedBy: cmaster2(a)hotmail.com Created an attachment (id=10165) --> (http://bugs.winehq.org/attachment.cgi?id=10165) The output from running total annihilation using wine on this page http://appdb.winehq.org/objectManager.php?sClass=version&iId=1739&iTestingI… it is written that multiplayer over lan doing 1 vs 1 works in Total Annihilation I have just tried with wine 0.9.52 and it does not it gives this error clicking ipx as connection type: err:dplay:DP_IF_InitializeConnection Unable to load service provider {685bc400-9d2c-11cf-a9cd-00aa006886e3} clicking tcp/ip as connection type: err:dplay:DP_IF_InitializeConnection Unable to load service provider {36e95ee0-8577-11cf-960c-0080c7534e82} -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 14

[Bug 15274] New: PSPad doesn't update connection icon.
by wine-bugs＠winehq.org Jan. 6, 2014

Jan. 6, 2014

http://bugs.winehq.org/show_bug.cgi?id=15274 Summary: PSPad doesn't update connection icon. Product: Wine Version: 1.1.4 Platform: Other OS/Version: Linux Status: UNCONFIRMED Severity: trivial Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: knight666(a)gmail.com Created an attachment (id=16072) --> (http://bugs.winehq.org/attachment.cgi?id=16072) Screenshot of the offending icon. PSPad doesn't update the connection icon when in FTP mode. This is absolutely trivial, but it annoys me quite a bit. When you start a connection in PSPad, it keeps it open, but after a while the connection is lost (normal behaviour). Under Wine however, the connection icon doesn't represent the state of the connection and is always set to "connected". I have included a screenshot of the icon in question. I'd be happy to fix it myself if someone could point me in the right direction. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 7