March 2013 - Wine-Bugs - list.winehq.org

[Bug 32326] New: DirectSound output in SNES9x gives crackling/glitchy audio
by wine-bugs＠winehq.org Aug. 30, 2020

Aug. 30, 2020

http://bugs.winehq.org/show_bug.cgi?id=32326 Bug #: 32326 Summary: DirectSound output in SNES9x gives crackling/glitchy audio Product: Wine Version: 1.5.18 Platform: x86-64 URL: http://files.ipherswipsite.com/snes9x/snes9x-1.53-win3 2.zip OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: directx-dsound AssignedTo: wine-bugs(a)winehq.org ReportedBy: markk(a)clara.co.uk Classification: Unclassified This bug applies to the SNES9x Super NES emulator. I'm testing with Wine 1.5.18-72-g0c0b229, Lubuntu 11.10 x86-64, Nvidia driver 304.64, SNES9x 1.53. (I set the bug component to directx-dsound, but that might not be correct.) Sound output using DirectSound is very CPU-intensive, and the sound crackles/glitches. Or rather, something about the sound output takes a relatively long time. According to "top" the CPU usage of SNES9x itself doesn't go through the roof with sound enabled. Emulation speed easily reaches 60fps with sound output disabled. On native Windows that's the case with DirectSound output (as opposed to the default is enabled too. CPU usage with sound disabled is ~26%. However on Wine with 48kHz DirectSound output the frame rate I see drops to ~45fps, CPU usage in top ~24% (lower usage because fewer frames per second are being emulated). If I disable the "Sync Sound" option frame rate returns to 60fps, ~30% CPU, but the sound still crackles. That's with the default buffer length of 64ms. Increasing that to 210ms helps a bit; I get 60fps even with Sync Sound enabled, though the sound still crackles. Decreasing buffer length to 16ms I get about 10fps with Sync Sound enabled. I don't think this problem is due to my hardware; other sound-producing programs like Audacious, flash plugin etc. seem to be fine. And by comparison, the Nestopia NES emulator in Wine produces (almost) glitch-free sound regardless of the program's latency setting. $ lspci -vv -s00:1b.0 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Lenovo Device 384e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at fc300000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel To hopefully reproduce the issue: - Download and unzip SNES9x - Download a ROM image, e.g. from http://pdroms.de/files/supernintendoentertainmentsystem/skipp-and-friends-p… - Run SNES9x. Choose Sound->Settings... and change Sound Driver to Snes9x DirectSound and Playback Rate to 48 KHz. (Selecting any other rate causes a crash for me, see bug 32312.) - Select Video->Display Configuration... and change Output Method to DirectDraw. (The default Direct3D just gives a blank screen, see bug 32319.) - Select File->Load Game... and choose the ROM image. - You should see graphics in the window and hear crackling/glitching sound. - In the sound settings, you can experiment with changing the buffer length and toggling the "Synchronize with sound core" option. I couldn't find any combination which gave artifact-free sound. For a +dsound log see the one I uploaded for bug 32312 at http://bugs.winehq.org/attachment.cgi?id=42668 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 17836] New: Motocross Madness 2 crashes at start
by wine-bugs＠winehq.org Aug. 29, 2020

Aug. 29, 2020

http://bugs.winehq.org/show_bug.cgi?id=17836 Summary: Motocross Madness 2 crashes at start Product: Wine Version: 1.1.17 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: hoehle(a)users.sourceforge.net Created an attachment (id=20098) --> (http://bugs.winehq.org/attachment.cgi?id=20098) trace and disassembly of crash location In AppDB, people have reported Motocross Madness 2 (mcm2) crashing in the intro but nobody had filed a bug yet. The backtrace makes it look like mcm2 crashes in, or immediately after, quartz.dll or amstream, after accessing ui\events.avi at the start of the program, after displaying for some seconds the stunt & warnings picture also known from the demo. The demo is not affected and proceeds from the intro picture to the menu. A log extract (+almost-all,-relay,-nls) from around the exception is attached. The processed file UI/events.avi is an Intel Indeo v5 video. The installer did not complain that Indeo is mising! Replacing it with a Cinepak avi, with an empty file, deleting it or installing iv5 still produces crashes at the same location in mcm2. Same with clicking to skip the intro picture or disabling quartz.dll. MCM2 suffers from SafeDisk 1.41.000 protection so it would not run as is in wine (or rather, it crashes much earlier). I tried 2 different cracks, both produced the same exception. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 23

[Bug 24320] New: Unexpected DetectEnvStatus.exe crash with Cisco Quick VPN Client (QVPN 1.4.1.2)
by wine-bugs＠winehq.org Aug. 28, 2020

Aug. 28, 2020

http://bugs.winehq.org/show_bug.cgi?id=24320 Summary: Unexpected DetectEnvStatus.exe crash with Cisco Quick VPN Client (QVPN 1.4.1.2) Product: Wine Version: unspecified Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: ethanfharris(a)gmail.com Cisco QVPN v1.4.1.2 does not work under Wine. QVPN is used to establish an IPSec Virtual Private Network tunnel from a client computer to a Cisco Router/Gateway to facilitate secure communication over the internet. There appear to be 3 errors when running the Cisco QVPN application under Wine: (a) an apparent crash / closure of DetectEnvStatus.exe (b) a failure to resolve a DDNS domain name, and (c) QVPN is not able to ping the gateway router, and all data transfer over the VPN fails. In all cases a popup box appears (see attached screenshot) indicating that DectectEnvStatus.exe has a serious problem and has closed. If anyone wants to debug this, I can supply a copy of QVPN, and I can set up a temporary guest account on my WRVS4400N small business router for testing purposes. QVPN works fine under Windows Vista SP2, and works fine on a Ununtu 10.04LTS host with a Vista guest running under Oracle VirtualBox. So the QVPN application itself is OK, and the problem is related somehow to Wine or various underlying services. On the attached screenshot the DetectEnvStatus popup appears immediately when I attempt to connect the VPN. If I use the IP address of the gateway router I am connecting to in lieu of the DDNS domain name, QVPN will create the VPN, but the tunnel verification ping test fails and the tunnel will not transmit data, which is why the "remote gateway not responding" message also appears on the screenshot. If I specify the DDNS domain name of the remote gateway router, the VPN tunnel is not established (not shown), suggesting a dynamic DNS name-to-IP address resolution related problem in Wine. Any help would be appreciated. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13

[Bug 23950] New: MPQEdit: Opening a folder results in the wrong error message
by wine-bugs＠winehq.org Aug. 27, 2020

Aug. 27, 2020

http://bugs.winehq.org/show_bug.cgi?id=23950 Summary: MPQEdit: Opening a folder results in the wrong error message Product: Wine Version: 1.3.0 Platform: x86 URL: http://zezula.net/download/mpqediten32_beta.zip OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: adys.wh(a)gmail.com Attachment #30066 showcases the expected error message ("The system cannot find the path specified"). Instead, running wine mpqedit c:\\ results in "Access denied" error message. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 30193] New: Crysis Wars ded server doesn't resize with wineconsole (curses backend)
by wine-bugs＠winehq.org Aug. 19, 2020

Aug. 19, 2020

http://bugs.winehq.org/show_bug.cgi?id=30193 Bug #: 30193 Summary: Crysis Wars ded server doesn't resize with wineconsole (curses backend) Product: Wine Version: 1.4-rc6 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: programs AssignedTo: wine-bugs(a)winehq.org ReportedBy: liquitsnake(a)gmx.net Classification: Unclassified Created attachment 39410 --> http://bugs.winehq.org/attachment.cgi?id=39410 screen The Crysis Wars dedicated server, when running under wineconsole with the curses backend, does not resize its viewport. It is stuck at the default 80x25, even if the terminal is considerably larger (see attachment). This produces some unexpected output, as some commands expect a larger size but have to be split over 2 lines via \ My terminal and wineconsole interact just fine, as I have verified with cmd. It's just this app that sticks to 80x25 no matter what. On Windows, it would normally spawn a console window with a size of 132x60 (or less if the desktop resolution can't fit that) Could it be that wineconsole first starts at 80x25 and only later resizes to terminal size? In that case, I can imagine that the app polls the size once during startup and sticks to that, thus limiting itself to 80x25. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 11

[Bug 13624] New: Lineage 2 - The Chaotic Throne - Hellbound
by wine-bugs＠winehq.org Aug. 16, 2020

Aug. 16, 2020

http://bugs.winehq.org/show_bug.cgi?id=13624 Summary: Lineage 2 - The Chaotic Throne - Hellbound Product: Wine Version: 1.0-rc3 Platform: All OS/Version: other Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: eryk-rutkowski(a)o2.pl Created an attachment (id=13604) --> (http://bugs.winehq.org/attachment.cgi?id=13604) Log from Terminal Problem is in Lineage 2 Hellbound and regarding npkycrypt - dll file. This dll is not work fine and don't recognize keyboard and i can't log in. There is communicate: "The keyboard security module has failed to load. please exit the game and try again" Sorry for my bad english but i'm from other country ;p -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 11955] New: NoteTab Pro 5.5 Cursor Display Issue
by wine-bugs＠winehq.org Aug. 15, 2020

Aug. 15, 2020

http://bugs.winehq.org/show_bug.cgi?id=11955 Summary: NoteTab Pro 5.5 Cursor Display Issue Product: Wine Version: 0.9.57. Platform: PC URL: http://www.notetab.com OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: lm_hamilton(a)yahoo.com When the cursor is at the last line of a file and the user presses ENTER to create a new line, it adds the line, but the cursor does not move. If the user starts typing, the text and cursor does go on the last line of the file. I used to have this issue on any file, but for the last several Wine releases, it has only affected outline files. Outlines are just text files with the extension otl. If you open the file in a text editor the topic for each outline starts with H=". I use Slackware 12.0 and Debian. Other users on the Yahoo Group for NoteTab on Linux are using Ubuntu and have the display issue at the top and bottom of the file. I have never had it at the top no matter what I have tried. Following is a text representation of the problem I have, numbers used for lines in the file, and a vertical bar "|" used to show the cursor position after pressing enter to get a new line. 1|Text on line one. 2Line added when press enter. 3Line added when press enter. If you start typing the cursor acts normally and starts adding text at the beginning of the last line added by pressing enter. In this example the text is added after "3". FYI - NoteTab Pro uses a different input control than NoteTab Light or Standard. Light and Standard use richedit. NoteTab is developed in Delphi. I have been a NoteTab user for ten years and beta tester for as long. The anti-cracker controls in NoteTab's trial version may prevent it from working in Wine. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 15

[Bug 31476] New: Bully: no DirectX 9.0c compatible sound card
by wine-bugs＠winehq.org Aug. 14, 2020

Aug. 14, 2020

http://bugs.winehq.org/show_bug.cgi?id=31476 Bug #: 31476 Summary: Bully: no DirectX 9.0c compatible sound card Product: Wine Version: 1.5.10 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: marti(a)juffo.org Classification: Unclassified According to the WineHQ entry about "Bully: Scholarship Edition" version 1.2, it used to work in wine 1.3.27. When I try this game on my system, it changes the resolution, displays a loading screen for a moment and then pops up a window saying: Bully: Scholarship Edition requires a DirectX 9.0c compatible sound card to be installed and and configured properly. After clicking "OK", Bully crashes with "Unhandled exception: page fault on read access to 0x00000004". The Bully installer from Steam automatically installs its own copy of DirectX 9. Using wine-1.5.10 on Arch Linux x86_64, with PulseAudio. Sound playback in winecfg and other applications works fine. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 18

[Bug 27207] New: splayer auto quit while open a mp3 file
by wine-bugs＠winehq.org Aug. 14, 2020

Aug. 14, 2020

http://bugs.winehq.org/show_bug.cgi?id=27207 Summary: splayer auto quit while open a mp3 file Product: Wine Version: 1.3.20 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: fracting(a)gmail.com Created an attachment (id=34764) --> (http://bugs.winehq.org/attachment.cgi?id=34764) Log: $ wine splayer.exe &> wine-splayer.log splayer is an open source player on gpl. http://www.splayer.org/index.en.html 1. Download splayer http://file.splayer.org/avant/SPlayerSetupInt.exe?2124 2. intall cscript.exe with winetricks $ winetricks wsh57 3. install splayer with all default settings. $ wine SetupInt.exe fixme:ole:CoCreateInstance no instance created for interface {a3d8cec0-7e5a-11cf-bbc5-00805f6cef20} of class {bd323430-ce94-11ce-82dd-0800095a5b55}, hres is 0x80004002 Does these fixme harmful? 4. start splayer: $ wine splayer.exe 5. open a mp3 file with splayer, splayer will auto quit with such messages: fixme:gdi:SetColorAdjustment stub fixme:dsalsa:IDsDriverBufferImpl_SetVolumePan (0x2413730,0x208718): stub fixme:dbghelp:elf_search_auxv can't find symbol in module err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr 0x7bc469ec -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 17

[Bug 30699] New: wine printing: barcode is not printed from VB6 application
by wine-bugs＠winehq.org Aug. 11, 2020

Aug. 11, 2020

http://bugs.winehq.org/show_bug.cgi?id=30699 Bug #: 30699 Summary: wine printing: barcode is not printed from VB6 application Product: Wine Version: unspecified Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: wineps.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: edwin+winebugs(a)etorok.net Classification: Unclassified Created attachment 40201 --> http://bugs.winehq.org/attachment.cgi?id=40201 barcode screenshot There is an application provided by the Romanian finance administration for printing Payment sheets with barcodes. I tried to use it in Wine (it appears to be a VB6 application), and I could enter all the data, and it displayed a generated barcode. However when I tried printing it didn't print the barcode. This happens both when printing to my printer (Samsung ML-2010P), or using CUPS-PDF. Attached is the PDF produced when printing through CUPS, and a screenshot taken while printing. Notice that on the screenshot there is a barcode in the right towards the top, and in the produced PDF there is no barcode at all. Attached is also WINEDEBUG=+relay,+seh,+tid,+psdrv output. How to reproduce (including download URL): 1. Prepare application mkdir $HOME/.wine-bug export WINEPREFIX=$HOME/.wine-bug # create winedir winecfg # get program wget http://static.anaf.ro/static/10/anaf/aplicatii/op_fv/opfv2010/instal_opfv_2… unzip instal_OPFV_28032012.zip wine instal_OPFV_2012.exe # set locale: if date format is wrong program refuses to work export LANG=ro_RO.UTF-8 LANGUAGE=ro_RO.UTF-8 LC_TIME=ro_RO.UTF-8 cd '$HOME/.wine-bug/drive_c/Program Files/OPFV 2012' # enter test data cat >ordine.txt <<EOF 1,1,1,TEST,1234567897,,,,BUGETUL DE STAT,1234567897,RO26TREZ57820470101XXXXX,,,BUGETUL DE STAT,16/05/2012,FV EOF 2. Make sure you have a printer. Bug reproduces with CUPS-PDF too, so edit $HOME/.wine-bug/drive_c/windows/win.ini, and use these settings for the printer: [devices] PDF=wineps.drv,CUPS:PDF [PrinterPorts] PDF=wineps.drv,CUPS:PDF,15,45 [windows] device=PDF,wineps.drv,CUPS:PDF 3. Run app wine OPFV_2012.exe 4. Print from the application - Click on "FV" - Choose 1,1,FV from the 'Nr. de ordine, Nr. OP/FV' dropdown - Click "Incarcare" - Click "Listare" 5. Look at the printed document, or PDF and notice that the barcode on the top right is missing in the printout. See attached PDF vs. attached screenshot. The barcode IS visible during printing, its just never printed. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 15