August 2013 - Wine-Bugs - list.winehq.org

[Bug 17619] New: GetDriveTypeW says C: is a network share if /home is an NFS share, breaking Steam installer
by wine-bugs＠winehq.org Nov. 22, 2013

Nov. 22, 2013

http://bugs.winehq.org/show_bug.cgi?id=17619 Summary: GetDriveTypeW says C: is a network share if /home is an NFS share, breaking Steam installer Product: Wine Version: 1.1.16 Platform: Other OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: kernel32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: lordhavoc(a)ghdigital.com Created an attachment (id=19804) --> (http://bugs.winehq.org/attachment.cgi?id=19804) Patch to make C: always report as DRIVE_FIXED type My /home is an NFS share, this means NtQueryVolumeInformationFile returns the type of ~/.wine/drive_c as a network share, confusing installers (such as Steam). I tracked this down to a problem with GetDriveTypeW querying the volume information and not even calling get_mountmgr_drive_type in some cases (such as a network share), so any configuration in winecfg had no effect. I have attached a patch that causes C: to always report as DRIVE_FIXED, which fixes my problem, and should avoid any problems of this sort in the future. However this still means that winecfg overrides have no effect on network shares, this only fixes the most common problem of C: being considered a network share. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 23

[Bug 34396] New: wPrime 2.10 doesn't start: err:ole:CoReleaseMarshalData IMarshal::ReleaseMarshalData failed with error 0x8001011d
by wine-bugs＠winehq.org Nov. 18, 2013

Nov. 18, 2013

http://bugs.winehq.org/show_bug.cgi?id=34396 Bug #: 34396 Summary: wPrime 2.10 doesn't start: err:ole:CoReleaseMarshalData IMarshal::ReleaseMarshalData failed with error 0x8001011d Product: Wine Version: 1.7.1 Platform: x86 URL: http://www.putme.net/wPrime210.zip OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: t.artem(a)mailcity.com Classification: Unclassified $ ./wPrime.exe fixme:ole:RemUnknown_QueryInterface No interface for iid {00000019-0000-0000-c000-000000000046} fixme:olepicture:OleLoadPictureEx (0xbbe154,774,0,{7bf80980-bf32-101a-8bbb-00aa00300cab},x=0,y=0,f=0,0x32f904), partially implemented. fixme:olepicture:OLEPictureImpl_SaveAsFile (0x1341f8)->(0x1300a0, 0, (nil)), hacked stub. Welcome to wPrime Benchmark v2.10. fixme:scrrun:filesys_QueryInterface Unsupported interface {7fd52380-4e07-101b-ae2d-08002b2ec713} fixme:scrrun:filesys_QueryInterface Unsupported interface {37d84f60-42cb-11ce-8135-00aa004bb851} fixme:scrrun:filesys_OpenTextFile (0x7e32fdf8)->(L"wprime.exe" 1 0 0 0x32f848) fixme:scrrun:textstream_get_AtEndOfStream (0x12ff70)->(0x32f7f4): stub err:ole:CoReleaseMarshalData IMarshal::ReleaseMarshalData failed with error 0x8001011d -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 5

[Bug 33384] New: Basic WPF application fails to handle images
by wine-bugs＠winehq.org Nov. 17, 2013

Nov. 17, 2013

http://bugs.winehq.org/show_bug.cgi?id=33384 Bug #: 33384 Summary: Basic WPF application fails to handle images Product: Wine Version: 1.5.25 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: leonidbrook(a)gmail.com Classification: Unclassified I created a simple application that display an image loaded from a file (see MainWindow.xaml). The file added as a "Resource" to the application project. Basically, the only thing I added to the base skeleton, is <Image Source="beta.png"/>. The application fails at System.Media.Imaging.BitmapSource.get_DUCECompatibleMILPtr() with System.InvalidCastException: Specified case is not valid. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 35

[Bug 34110] New: MS Excel 2010 escape/unescape problem in sheet names
by wine-bugs＠winehq.org Nov. 15, 2013

Nov. 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=34110 Bug #: 34110 Summary: MS Excel 2010 escape/unescape problem in sheet names Product: Wine Version: 1.6-rc5 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: lviggiani(a)gmail.com Classification: Unclassified Created attachment 45356 --> http://bugs.winehq.org/attachment.cgi?id=45356 Test example 1) Create a new Excel file. 2) Remane sheet 1 as "a & b" (without quotes) 4) Put some value in first cell 3) Go to sheet 2 and link the first cell to first cell of sheet 1 (now named as "a & b") (='a & b'!A1) 4) Save (as .xlsx / MS Excel 2010) and close Excel 5) Reopen excel and load the saved file 6) It will display a "broken link error" and the first sheet will now be named as "a & b" whereas first cell of second sheet still links to ='a & b'!A1 (correct) It seems a escape / unescape issue while opening the .xlsx. I'm pretty sure the issue is while opening, not sving, as the same issue occurs if you create the file as described above in windows and try to open in linux with wine. The issue is occurring since wine 1.5. It wasn't in the past. I've attached the test .xlsx file -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 16

[Bug 34177] New: -pipe makes mingw-g++ work unreliably
by wine-bugs＠winehq.org Nov. 15, 2013

Nov. 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=34177 Bug #: 34177 Summary: -pipe makes mingw-g++ work unreliably Product: Wine Version: 1.6-rc5 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: b7.10110111(a)gmail.com Classification: Unclassified Created attachment 45461 --> http://bugs.winehq.org/attachment.cgi?id=45461 Test case How to reproduce: 1. Install mingw from mingw-get-inst-20120426.exe, use default settings. Don't pay attention at log clean error. 2. Do mingw-get upgrade "gcc<4.7" mingw-get upgrade "g++<4.7" (these are versions which should work for Qt-based apps; not sure if "gcc" line is actually needed) 3. Unpack attached test case 4. Now either run build.bat from "wine cmd" there, being inside the test directory, or run: wine c:/mingw/bin/g++ -c -pipe -O2 -o mainwindow.o mw-processed.cpp (you don't need to install Qt since the test file is a c++-preprocessed version, resulting from running "g++ -E") 5. Get the following error: {standard input}: Assembler messages: {standard input}:5343: Error: junk `(%esp)movl $0' after expression {standard input}:5343: Error: too many memory references for `mov' 6. Remove "-pipe" from command, and this works with the same assembly code. This all is quite sensitive to assembly code generated, e.g. remove "-O2" and you don't reproduce the bug; remove some lines from source — and again not reproduced... Corresponding assembly code which causes the error (from changing "-c" to "-S"), from line 5343: movl %eax, 16(%esp) movl $0, 12(%esp) Seems previous line appears partially (starting from "(") on the next one, and second one is truncated starting from ",". I'm not sure what component has this bug, seems this is related either to string manipulation, or piping data between apps. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 34209] New: fullscreen apps won't switch back to resolution after command-tabbing on OS X
by wine-bugs＠winehq.org Nov. 15, 2013

Nov. 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=34209 Bug #: 34209 Summary: fullscreen apps won't switch back to resolution after command-tabbing on OS X Product: Wine Version: 1.6 Platform: x86 OS/Version: Mac OS X Status: UNCONFIRMED Severity: normal Priority: P2 Component: winemac.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: jjheik(a)gmail.com Classification: Unclassified Fullscreen games which change resolution do not switch back to correct resolution after being tabbed out. They work correctly until the user command-tabs out to another application. I've had this problem with both Both The Elder Scrolls V: Skyrim and the freeware game DX Ball 2, which are both DirectX games. I'm running Mac OS X 10.8.4. I have installed both Wine 1.6.0 and the development 1.7.0 from Macports and both have this problem with the native Mac driver. When switching back, the screen remains at maximum resolution and the apps run in the upper-left corner of the screen and neither the menu bar or dock are hidden. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 5

[Bug 28664] New: qedit/mediadet test crashes on FreeBSD9
by wine-bugs＠winehq.org Nov. 15, 2013

Nov. 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=28664 Bug #: 28664 Summary: qedit/mediadet test crashes on FreeBSD9 Product: Wine Version: 1.3.30 Platform: x86 OS/Version: Linux Status: NEW Keywords: download, source, testcase Severity: normal Priority: P2 Component: winegstreamer AssignedTo: wine-bugs(a)winehq.org ReportedBy: austinenglish(a)gmail.com Classification: Unclassified Created attachment 36837 --> http://bugs.winehq.org/attachment.cgi?id=36837 backtrace The test was running without $DISPLAY set, but that passes fine for me on gentoo/debian. Backtrace attached. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 16

[Bug 25994] New: Process Hacker: Unimplemented function ntdll.dll.NtCreateKeyedEvent
by wine-bugs＠winehq.org Nov. 15, 2013

Nov. 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=25994 Summary: Process Hacker: Unimplemented function ntdll.dll.NtCreateKeyedEvent Product: Wine Version: 1.3.13 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: ntdll AssignedTo: wine-bugs(a)winehq.org ReportedBy: lukasz.wojnilowicz(a)gmail.com Created an attachment (id=33136) --> (http://bugs.winehq.org/attachment.cgi?id=33136) Terminal output on Wine 1.3.13 Steps to reproduce: 1) remove ~/.wine 2) winetricks gecko 3) install Process Hacker 4) copy winsta.dll to system32 5) wine ProcessHacker.exe Behaviour: There is Wine's error. Expected behaviour: There should be no error. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 14

[Bug 33872] New: Pando (installer of LOL) can't load FAQ
by wine-bugs＠winehq.org Nov. 15, 2013

Nov. 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=33872 Bug #: 33872 Summary: Pando (installer of LOL) can't load FAQ Product: Wine Version: 1.6-rc3 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: litimetal(a)gmail.com Classification: Unclassified Created attachment 44931 --> http://bugs.winehq.org/attachment.cgi?id=44931 screenshot_linux.png 0. download it from http://l3cdn.riotgames.com/ShellInstaller/NA/LeagueofLegends_NA_Installer_0… 1. wine it, and click 'next' 2. can't load FAQ -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 12

[Bug 34013] New: Altium Designer 10 installer crashes in InternetQueryOptionW
by wine-bugs＠winehq.org Nov. 15, 2013

Nov. 15, 2013

http://bugs.winehq.org/show_bug.cgi?id=34013 Bug #: 34013 Summary: Altium Designer 10 installer crashes in InternetQueryOptionW Product: Wine Version: 1.6-rc4 Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: wininet AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com Classification: Unclassified After doing 'winetricks vd=1024x768' to work around bug 34012, continued with Altium Designer install. Next problem was it refused to accept my username and password. +relay,+seh,+wininet showed that it was crashing in InternetQueryOptionW() somehow. The installer caught the crash, so there was no backtrace, but it did give the address in the gui and said it was a read from NULL. Passing that address to winedbg's disasm pointed to str_to_buffer(). The option it was retrieving was INTERNET_OPTION_PROXY_USERNAME; evidently req->session->appInfo->proxyUsername was null. This may be a regression introduced by the recent commit bedf296a27d5689beb693637407829b0bd6d8a1c The attached patch gets past this problem and on to the next. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10