February 2016 - Wine-Bugs - list.winehq.org

[Bug 37115] New: Calling ReadFile from WINBASEAPI (WinBase.h) with zero read length causes hang
by wine-bugs＠winehq.org April 12, 2016

April 12, 2016

https://bugs.winehq.org/show_bug.cgi?id=37115 Bug ID: 37115 Summary: Calling ReadFile from WINBASEAPI (WinBase.h) with zero read length causes hang Product: Wine Version: unspecified Hardware: x86 OS: Mac OS X Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: robw(a)sagatech.ca Our software connects to a serial device using USB-serial adapters. In the process of attempting to create a wrapper for use on OSx, I discovered a hang when I attempted to connect to the device under Wine that does not occur under Windows. I have tracked it down to the WINBASEAPI ReadFile. Under Windows, if a zero value is passed as the length to read, it handles and returns zero. Under Wine, it causes a "black box" (meaning I can't trace it) hang. I have worked around this in my code by including a return on zero value for the length, however believe it may be responsible for other serial issues I have seen in researching this problem. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 13

[Bug 40129] New: MSI Reading and Writing Behaves differently than Windows
by wine-bugs＠winehq.org April 12, 2016

April 12, 2016

https://bugs.winehq.org/show_bug.cgi?id=40129 Bug ID: 40129 Summary: MSI Reading and Writing Behaves differently than Windows Product: Wine Version: 1.9.1 Hardware: x86 OS: Mac OS X Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: agrothberg(a)yahoo.com Created attachment 53618 --> https://bugs.winehq.org/attachment.cgi?id=53618 Corrupt MSI I am using Python `bdist_msi` to create an MSI and then https://github.com/activescott/lessmsi to inspect the MSI. When using Wine, I can create an MSI and then successfully inspect it. However if I try to install the MSI that was created under Wine on Windows machine, in stall fails. Further using the same lessmsi tool above but running it on Windows fails. A complete write up is here: http://stackoverflow.com/questions/35004900/using-wine-to-build-msi-for-pyt… but it appears that the Property table on the MSI is corrupt. Attached is the msi. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 15

[Bug 39838] New: Wreckfest Server: Crashes at startup, unimplemented function KERNEL32.dll.GetConsoleScreenBufferInfoEx
by wine-bugs＠winehq.org April 12, 2016

April 12, 2016

https://bugs.winehq.org/show_bug.cgi?id=39838 Bug ID: 39838 Summary: Wreckfest Server: Crashes at startup, unimplemented function KERNEL32.dll.GetConsoleScreenBufferInfoEx Product: Wine Version: 1.8 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: kernel32 Assignee: wine-bugs(a)winehq.org Reporter: devin(a)devinbraune.de Distribution: --- Created attachment 53182 --> https://bugs.winehq.org/attachment.cgi?id=53182 Screenshot which shows terminal (input and output) and other windows related to it Bugbear Games' Next Car Game: Wreckfest crashes in dedicated server mode because KERNEL32.dll.GetConsoleScreenBufferInfoEx is not implemented. Attached screenshot shows what exactly happens when starting a clean installation of wreckfest with a clean wineprefix 1.8. The start_server.bat is part of the game and seems to start wreckfest.exe -s, the regular executable of the game. The game itself launches fine if hardware requirements are met. Just not the server. Unfortunately, I can't post a download link because it's a commercial game on steam. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 19

[Bug 34174] New: Error cleaning log file when installing mingw
by wine-bugs＠winehq.org April 12, 2016

April 12, 2016

http://bugs.winehq.org/show_bug.cgi?id=34174 Bug #: 34174 Summary: Error cleaning log file when installing mingw Product: Wine Version: 1.6-rc5 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: b7.10110111(a)gmail.com Classification: Unclassified Created attachment 45459 --> http://bugs.winehq.org/attachment.cgi?id=45459 Terminal log How to reproduce: 0. (Clean wine prefix after running winecfg was used for this) 1. Install mingw-get-inst-20120426.exe with default settings (but accept license of course :) ) 2. See a message "Encountered an error cleaning log file (1)" 3. Then after you press OK and click next with a tick "show log file" enabled see empty log file opened in notepad. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 14617] New: 3rd party treeview stopped working
by wine-bugs＠winehq.org April 12, 2016

April 12, 2016

http://bugs.winehq.org/show_bug.cgi?id=14617 Summary: 3rd party treeview stopped working Product: Wine Version: 1.1.1 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: brendan.dowds(a)sciencesoft.com CC: julliard(a)winehq.org Hello all, I am a developer for a software company trying to get our software to work on WINE. Unfortunately the third party treeview control we rely heavily on fails to work properly. Namely in that we can not drag items from the treeview. A small test program (TV_Test.exe), written in VB6, is attached to demostrate this behaviour. Upon clicking on a node the program performs a HitTest to determine what type of node it is and its subsequent behaviour (expand/collapse, allowing dragging, etc.) To duplicate place the attached folder in the 'Program Files' folder (or where you please) and run the exe, through WINE obviously. Add a node (or several) via the button then click on a node. The message box should then tell you if the test has been passed or not. A successful test should also change to be a couple of right pointing arrows, and the direction of the arrow in the treeview node (if it was the lowest branch level). A failed test reports an error ("Error: Error in loading DLL (No.48) In ClickedNode") in the message box. Now, this is where I know I'm breaking the rules. But this test program and our main program (which I hope to at to the Apps Database today) both need wine tricks to have been run, specifically vcrun6, for redistribution reasons. However, I've already emailled Dan Kegel and he believes this may not be necessary. I digress. The test program always failed without winetricks vcrun6, but after it (and before the bad revision) it worked. (Strictly you do not need to run the full vcrun6, you need to remove the msvcrt, oleaut32 and olepro32.dlls from the drive_c/windows/sysem32/ folder and run the vcredist.exe through WINE.) A colleague looked into this problem in more detail hoping to solve it ourselves (how wrong we were) and we believe that although we use winetricks, in this case it actually helps expose a bug rather than the bug being something intrinsic in what we use winetricks for i.e. replace built-in dlls with native ones. So in summary, running the test program without vcrun6 has always failed, with vcrun6 it used to work but now doesn't. Some more relevant information (I hope): - I pulled down the latest git repository this morning (SHA1 ID: 2f445e4e4a74bda3034d993226f05073e777eb85) and tested it, the bug is still there (wine-1.1.1-339-g2f445e4). - I'm running FC6 - gcc version is 4.1.2 - command to run the program is '"wine C:\Program Files\Treeview Test\TV_Test.exe"', assuming the folder is located in 'Program Files' - A git-bisect showed the first bad revision to be between 0.9.37 and 0.9.38 (SHA1 ID:2f445e4e4a74bda3034d993226f05073e777eb85) - Further investigation found that by commenting out just two lines the program worked. And still works in the lastest version. The two lines are in load_library of /dlls/kernel32/module.c and are shown in the attached file (load_library_EDITTED.txt) - The git log for the bad revision is attached. - My intention was to also attach the output of WINEDEBUG but with the below command: $ WINEDEBUG=+relay wine "C:\windows\Program Files\Treeview Test\TV_Test.exe" I get: WINEDEBUG=+relay: Command not found. Look forward to hearing anything and many thanks. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 31

[Bug 32827] New: Legrand XL3Pro3 : Crash on launch
by wine-bugs＠winehq.org April 12, 2016

April 12, 2016

http://bugs.winehq.org/show_bug.cgi?id=32827 Bug #: 32827 Summary: Legrand XL3Pro3 : Crash on launch Product: Wine Version: 1.4.1 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: critical Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: gogy.sp(a)gmail.com Classification: Unclassified Created attachment 43359 --> http://bugs.winehq.org/attachment.cgi?id=43359 wine backtrace Wine crashes when I launch Legrand XL3Pro3 without any detail. XL3Pro3 is a free soft from Legrand Electrics Company (French) that configure electric installation for home users and pro users Please see backtrace.txt in attachment Thx -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 17

[Bug 30687] New: Powerpoint 2003/2007: embedded video play/pause on click no longer works
by wine-bugs＠winehq.org April 12, 2016

April 12, 2016

http://bugs.winehq.org/show_bug.cgi?id=30687 Bug #: 30687 Summary: Powerpoint 2003/2007: embedded video play/pause on click no longer works Product: Wine Version: 1.5.2 Platform: x86 OS/Version: Linux Status: NEW Keywords: regression Severity: normal Priority: P2 Component: quartz AssignedTo: wine-bugs(a)winehq.org ReportedBy: dimesio(a)earthlink.net CC: aric(a)codeweavers.com Depends on: 30445 Classification: Unclassified Regression SHA1: 821ead201d38ebca8f3e92e71bf7b6c8641b5ace Setting Wine version based on the regression test for bug 30445. In PowerPoint, when embedded video is set to play on click, you should be able to toggle pause and play at any point by clicking on the video. That's no longer working. In wine-1.5.4-61-g8327e6f, the video can be started on click, and paused once by clicking on it, but subsequent clicks do nothing. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 15

[Bug 13683] New: Ultima IX: Mouse pointer missing when reading books, under inventory
by wine-bugs＠winehq.org April 12, 2016

April 12, 2016

http://bugs.winehq.org/show_bug.cgi?id=13683 Summary: Ultima IX: Mouse pointer missing when reading books, under inventory Product: Wine Version: 1.0-rc3 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: rixa(a)cs.tut.fi When opening an in-game book for reading, there is nothing to work as a mouse pointer to help clicking the page corners or other clickable elements with. The books do work, but finding the correct spot to click without any pointer is quite hard. Saving and loading the game as well as selecting spells are also implemented by an in-game book, so these functions are likewise affected. A similar issue affects using the inventories and toolbelt, though the pointer is not so much missing as being drawn under instead of over the inventory panel. Otherwise the game seems to work well. I'm running wine 1.0rc3 on a CentOS 5 system with a GeForce4 Ti 4800 graphics card and nVidia proprietary drivers version 96.43.05. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 70

[Bug 40201] New: EccoPro only works on Wine 1.6.2
by wine-bugs＠winehq.org April 12, 2016

April 12, 2016

https://bugs.winehq.org/show_bug.cgi?id=40201 Bug ID: 40201 Summary: EccoPro only works on Wine 1.6.2 Product: Wine Version: 1.9.3 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: tim.c.quinn(a)gmail.com Distribution: --- Created attachment 53710 --> https://bugs.winehq.org/attachment.cgi?id=53710 wine eccoext.exe output Ecco Pro 4.01 only works on Wine 1.6.2 and fails to run on any later version. Installation instructions for getting a static installation of ecco pro is here: http://nixplayground.blogspot.ca/2015/02/installing-ecco-pro-401-in-linux-u… I have run through eccoext.exe and ecco32.exe on later versions and they fail in all cases. I have tested on the following systems: * Ubuntu 14.04.4 x64 * Ubuntu 15.10 * Opensuse 42.1 I will attach the outputs for each of the following tests: 1) % wine eccoext.exe --> eccoext_output.txt 2) % winedbg ecco32.exe --> ecco32_output.txt Test 3) % wine ecco32.exe just results in a dialog "An application error has occurred. Please exit Ecco and restart" -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 24

[Bug 39878] New: Diablo II does not start
by wine-bugs＠winehq.org April 12, 2016

April 12, 2016

https://bugs.winehq.org/show_bug.cgi?id=39878 Bug ID: 39878 Summary: Diablo II does not start Product: Wine Version: 1.7.25 Hardware: x86-64 OS: Linux Status: NEW Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: wylda(a)volny.cz Distribution: --- Diablo 2 does not start under wine-1.9.0. This is actually regression caused by wine-1.7.24-57-g7cdaece: commit 7cdaece711e696447b10ea9c0ab00b7ced799165 Author: Henri Verbeet <hverbeet(a)codeweavers.com> Date: Mon Aug 18 08:26:20 2014 +0200 wined3d: Store the amount of video memory as a UINT64. Diff in console log between 1.7.24 and 1.7.25: fixme:dbghelp_dwarf:dwarf2_parse_subprogram Unhandled Tag type 0x26 at ctx(0x32b964,L"kernel32<elf>"), for debug_info(abbrev:0x7a40c30,symt:0x7b9b0d8) fixme:dbghelp_dwarf:dwarf2_parse_subprogram Unhandled Tag type 0x26 at ctx(0x32b964,L"advapi32<elf>"), for debug_info(abbrev:0x8631ce0,symt:0x86f81fc) fixme:dbghelp_dwarf:dwarf2_parse_subprogram_block Unhandled Tag type 0x26 at ctx(0x32b964,L"comdlg32<elf>"), for debug_info(abbrev:0x8791fa0,symt:(nil)) ... -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 26