June 2017 - Wine-Bugs - list.winehq.org

[Bug 24209] New: Burger Shop fullscreen
by wine-bugs＠winehq.org June 13, 2025

June 13, 2025

http://bugs.winehq.org/show_bug.cgi?id=24209 Summary: Burger Shop fullscreen Product: Wine Version: 1.2 Platform: All OS/Version: All Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: danimothonline(a)gmail.com Created an attachment (id=30479) --> (http://bugs.winehq.org/attachment.cgi?id=30479) Screenshot of the bug. When Burger Shop is fullscreen(default behavior), the window is displayed on the top left corner of the screen. The graphics are distorted a little bit and the clicks are made as if the screen was actually placed in the middle of the screen. In the screenshot attached, note: 1) The slightly distorted graphics 2) How my mouse is positioned in the middle of the screen, and the "Challenge Mode" is highlighted. All clicks have a position relevant to the center of the screen instead of the top left. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 43233] New: Disabling strict draw ordering causes background textures in FFXIV not to render properly
by wine-bugs＠winehq.org June 11, 2025

June 11, 2025

https://bugs.winehq.org/show_bug.cgi?id=43233 Bug ID: 43233 Summary: Disabling strict draw ordering causes background textures in FFXIV not to render properly Product: Wine-staging Version: 2.10 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: spryor(a)redhat.com CC: erich.e.hoover(a)wine-staging.com, michael(a)fds-team.de, sebastian(a)fds-team.de Distribution: --- In FFXIV, there are several areas that have a sort of fog texture over some of the lower "skybox" uninteractable area. When disabling strict draw ordering, the game performs much faster, but these textures fail to render, or flicker, or flicker in a grid. However, enabling strict draw ordering is a pretty big performance hit (about 15-20 fps hit in most situations) Attached are pictures of two areas both with strict draw ordering and without. It was difficult to catch it at a moment where all the splotches of background were there, but the difference should still be clear -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 15

[Bug 24525] New: Sharing of Files does not work - Application "DVRManager" from Kathrein Germany - MFSServer
by wine-bugs＠winehq.org June 11, 2025

June 11, 2025

http://bugs.winehq.org/show_bug.cgi?id=24525 Summary: Sharing of Files does not work - Application "DVRManager" from Kathrein Germany - MFSServer Product: Wine Version: 1.3.3 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: critical Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: panther(a)toppoint.de panther(a)Akela:~/.wine/drive_c/Programme/Kathrein/DVRManager$ wine UFS822.exe fixme:advapi:RegisterEventSourceW ((null),L"bgsvcgen"): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000000,(nil),0x0001,0x00000000,0x73e7d4,(nil)): stub fixme:advapi:DeregisterEventSource (0xcafe4242) stub --- Main Menue is shown.... selecting MFS-Server ... selecting Shareing Server... fixme:share:NetShareEnum Stub ((null) 502 0x33dbb4 -1 0x33dba8 0x33dbb8 0x33dbbc) fixme:share:NetShareEnum Stub ((null) 502 0x33d538 -1 0x33d52c 0x33d53c 0x33d540) --- asked for user/password.... so no crash anymore... but the NetShare does not work! Any help? A new bug! Download: http://www.kathrein.de/esc-kathrein/data/receiver/pc-programm/dvr-manager-2… YS Panther PS: It was a test with version Wine 1.3.3 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13

[Bug 39434] New: GTA Vice City: Textures dissapears or blinks while moving or rotating camera
by wine-bugs＠winehq.org June 11, 2025

June 11, 2025

https://bugs.winehq.org/show_bug.cgi?id=39434 Bug ID: 39434 Summary: GTA Vice City: Textures dissapears or blinks while moving or rotating camera Product: Wine Version: 1.7.52 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: trivial Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: geeronzero(a)gmail.com Distribution: --- Created attachment 52544 --> https://bugs.winehq.org/attachment.cgi?id=52544 screenshots Textures dissapears or blinks while moving or rotating camera. Gta Vice City version is 1.1. This bug is in normal game and my mods. Textures dissapears only on stock game objects - buildings, roads, trees. The handmade models are ok(cars, roads, buildings, e.t.c). Also there is a problem with a movie in the begginning - there is a music, but i see the blank screen. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 9

[Bug 37245] New: Can't execute cmd /c "script.bat" "argument"
by wine-bugs＠winehq.org June 11, 2025

June 11, 2025

https://bugs.winehq.org/show_bug.cgi?id=37245 Bug ID: 37245 Summary: Can't execute cmd /c "script.bat" "argument" Product: Wine Version: 1.7.26 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: cmd Assignee: wine-bugs(a)winehq.org Reporter: mhlavink(a)redhat.com Created attachment 49533 --> https://bugs.winehq.org/attachment.cgi?id=49533 trace I'm trying to make Profili 2 Pro work in wine. So far I reached the point where it works, but there is an issue when application tries to execute is *.bat wrapper. I get this error (more complete trace is attached): Can't recognize 'C:\ProfiliProV2\xf.bat" "C:\ProfiliProV2\XFoil.exe' as an internal or external command, or batch script. With trace enabled, I get: wmain Full commandline 'L"C:\\windows\\system32\\cmd.exe /c \"C:\\ProfiliProV2\\xf.bat\" \"C:\\ProfiliProV2\\XFoil.exe\""' WCMD_DumpCommands Parsed line: WCMD_DumpCommands 0x121c18 0 00 (nil) L"C:\\ProfiliProV2\\xf.bat\" \"C:\\ProfiliProV2\\XFoil.exe" Redir:L"" command has stripped first and last \" but the quotes in the middle remained WCMD_process_commands Executing command: 'L"C:\\ProfiliProV2\\xf.bat\" \"C:\\ProfiliProV2\\XFoil.exe"' WCMD_execute param1: L":\\ProfiliProV2\\xf.bat\"", param2: L"C:\\ProfiliProV2\\XFoil.exe" param1 is missing 'C' as first character and has surplus \" at the end WCMD_run_program first param='L"C:\\ProfiliProV2\\xf.bat C:\\ProfiliProV2\\XFoil.exe"' and looking for the command in that composed path fails (as expected): Searching in 'L"C:\\ProfiliProV2\\xf.bat C:\\ProfiliProV2\\"' for 'L"XFoil.exe"' The problem related to wcmdmain.c:wmain(...) around line 2590: /* strip first and last quote characters if opt_s; check for invalid * executable is done later */ if (opt_s && *cmd=='\"') WCMD_strip_quotes(cmd); before this, cmd is: "C:\ProfiliProV2\xf.bat" "C:\ProfiliProV2\XFoil.exe" after this, cmd is C:\ProfiliProV2\xf.bat" "C:\ProfiliProV2\XFoil.exe the quotes in the middle remains. opt_s was not specified, but was triggered on by checks around 2450: there is at least one quote (pass), there is a second quote(pass) and there is no more quotes(fail) - the last one fails and sets opt_s. My guess would be that those checks should be done on first argument, not all of them together. The xf.bat is very simple wrapper: %1 <XFoil.cmd >XFoil.out exit -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 4

[Bug 40563] New: N1MM Logger+ version 1.0.5x crashes at launch
by wine-bugs＠winehq.org June 11, 2025

June 11, 2025

https://bugs.winehq.org/show_bug.cgi?id=40563 Bug ID: 40563 Summary: N1MM Logger+ version 1.0.5x crashes at launch Product: Wine Version: 1.6.2 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: critical Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: temp7(a)n0sq.us Distribution: --- Created attachment 54401 --> https://bugs.winehq.org/attachment.cgi?id=54401 output from running from CLI Program crashes at launch. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 5

[Bug 39056] New: Redirect a device printer port to a print command (lpr)
by wine-bugs＠winehq.org June 11, 2025

June 11, 2025

https://bugs.winehq.org/show_bug.cgi?id=39056 Bug ID: 39056 Summary: Redirect a device printer port to a print command (lpr) Product: Wine Version: 1.7.48 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: spooler Assignee: wine-bugs(a)winehq.org Reporter: hugocanalli(a)gmail.com Distribution: --- Sometimes I need to write directly to a print port. That's because I have a old program that works only with ports named lpt[1-4] or com[1-4] I can do it creating a link to my device to the dosdevices folder. E.g: ln -s /dev/lp0 ~/wine/dosdevices/lpt1 ln -s /dev/ttyUSB0 ~/.wine/dosdevices/lpt2 Typing commands like echo 'hello' > lpt1 will work great. There are some cases that my printer is not directly connected to my computer. By example my Brother DCP-8085DN printer that works over network, a wireless printer, or same my epson lx300 using lpt1 port but instead is installed on another computer. To map this kind of printers I use cups and it work on wine using print dialog (e.g printing using notepad). But what about if I need to use my old dos program or would like play around with wine start.exe program and type commands like echo 'hello' > lpt1 Wine start.exe returns File not found. Cups doesn't create /dev/xxx devices to printers. So I can't do a link to dosdevices folder and I have to use the lpr command to print. One solution is create a file named lpt1 on dosdevices folder and use loop script in linux cheking for changes and redirect data to lpr. I can do it easly using the following procedure: cd ~/.wine/dosdevices mkfifo lpt1 chmod 666 lpt1 And create a running forever script like: while true do cat ~/.wine/dosdevices/lpt1 | lpr -o raw -P cups_printer_name done While this method can work would be great if we could do it only using wine ways and therefore no need to such script. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 5

[Bug 28759] New: 'start inetcpl.cpl' fails
by wine-bugs＠winehq.org June 7, 2025

June 7, 2025

http://bugs.winehq.org/show_bug.cgi?id=28759 Bug #: 28759 Summary: 'start inetcpl.cpl' fails Product: Wine Version: 1.3.30 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: RandomAccountName(a)mail.com Classification: Unclassified Starting inetcpl.cpl directly via the start command doesn't seem to be possible in Wine. Running 'wineconsole cmd' and then 'start inetcpl.cpl' from within cmd gives: Application could not be started, or no application associated with the specified file. ShellExecuteEx failed: File not found start C:/Windows/system32/inetcpl.cpl gives: Application could not be started, or no application associated with the specified file. ShellExecuteEx failed: Success Both cases bring up the Internet Options control panel applet on Windows XP. Just running "wine inetcpl.cpl" also fails, with no output except "Segmentation fault". -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 12

[Bug 22273] New: CDBurnerXP doesn't start with Mono
by wine-bugs＠winehq.org June 7, 2025

June 7, 2025

http://bugs.winehq.org/show_bug.cgi?id=22273 Summary: CDBurnerXP doesn't start with Mono Product: Wine Version: 1.1.42 Platform: x86-64 URL: http://cdburnerxp.se/ OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: RandomAccountName(a)mail.com The summary basically says it all... with winetricks mono26, the program installs but won't start. With winetricks dotnet20, it's buggy but at least somewhat usable. There's not much terminal output: fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Native.CDBXP" (1.0.4.0) fixme:reg:GetNativeSystemInfo (0x9c9bf58) using GetSystemInfo() -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 16

[Bug 30018] New: Creative Writer 2 fails to open RTF and plain text files
by wine-bugs＠winehq.org June 7, 2025

June 7, 2025

http://bugs.winehq.org/show_bug.cgi?id=30018 Bug #: 30018 Summary: Creative Writer 2 fails to open RTF and plain text files Product: Wine Version: 1.4-rc5 Platform: x86-64 URL: ftp://ftp.microsoft.com/deskapps/kids/cw2install.exe OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: ole32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: RandomAccountName(a)mail.com Classification: Unclassified Created attachment 39086 --> http://bugs.winehq.org/attachment.cgi?id=39086 terminal output Creative Writer 2 fails to open files in plain text or RTF format with the message "Oops! An unexpected error 0x80030050 occurred." Files in its native format (.max) can be opened successfully. In older Wine versions, it was possible to work around this with native ole32 from DCOM98. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9