September 2018 - Wine-Bugs - list.winehq.org

[Bug 34297] New: Allow reconnecting to disconnected joysticks
by wine-bugs＠winehq.org Oct. 22, 2021

Oct. 22, 2021

http://bugs.winehq.org/show_bug.cgi?id=34297 Bug #: 34297 Summary: Allow reconnecting to disconnected joysticks Product: Wine Version: 1.7.0 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: directx-dinput AssignedTo: wine-bugs(a)winehq.org ReportedBy: achurch+wine(a)achurch.org Classification: Unclassified Created attachment 45660 --> http://bugs.winehq.org/attachment.cgi?id=45660 Proof-of-concept patch Currently, if a joystick is disconnected and then reconnected (because the cable is pulled out, for example), Wine acts as though the joystick is present but stuck at the last state it reported, and it fails to report any subsequent changes in device state, which is an arguably suboptimal user experience. The attached patch (against 1.7.0) changes the Linux evdev driver to attempt to reopen a joystick device after a read fails. This patch uses the simple heuristic of "if it's on the same device file and has the same name, it's the same joystick", which means (1) it won't reconnect if the device file changes and (2) it could falsely reconnect if there are multiple input devices with the same name, but it works for simple circumstances. Naturally, one could iterate over all possible input devices to try and find the device, but that could be fairly expensive to do on every poll operation, and it would probably involve concurrency issues relating to checking whether the device is already known as a different joystick. In the long run, it might be better to monitor the /dev/input directory for added and removed devices (perhaps using inotify) and use those events to handle reconnection. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 10

[Bug 42695] New: PoE fail to start when launching with dx11 enabled
by wine-bugs＠winehq.org Oct. 22, 2021

Oct. 22, 2021

https://bugs.winehq.org/show_bug.cgi?id=42695 Bug ID: 42695 Summary: PoE fail to start when launching with dx11 enabled Product: Wine-staging Version: 2.3 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: gufideg(a)gmail.com CC: erich.e.hoover(a)wine-staging.com, michael(a)fds-team.de, sebastian(a)fds-team.de Distribution: --- Created attachment 57663 --> https://bugs.winehq.org/attachment.cgi?id=57663 console output I get an error from Poe that says: "Failed to retrive IDXGIFactory from adapter": In source code file: ..\Device \D3D11\DeviceD3D11.cpp at line 336, Processing file: Failed to retrive IDXGIFactory from adapter Error: E_NOINTERFACE Description: Message: Then I click OK and the game closes. Works nicely with dx9 and dx9 ex -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 69

[Bug 38696] New: Messy screen in DxTex.exe
by wine-bugs＠winehq.org Oct. 22, 2021

Oct. 22, 2021

https://bugs.winehq.org/show_bug.cgi?id=38696 Bug ID: 38696 Summary: Messy screen in DxTex.exe Product: Wine Version: 1.7.44 Hardware: x86 OS: Mac OS X Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: isakov-sl(a)bk.ru Created attachment 51621 --> https://bugs.winehq.org/attachment.cgi?id=51621 messy screen with wine-hq Steps to reproduce: Start DxTex.exe that is included in DirectxSDK available for download from https://www.microsoft.com/en-us/download/details.aspx?id=6812 1. New texture. Settings default 2. Open onto this surface and choose any graphic file. 3. see... With wine-stage the screen is good. To be sure: I used unmodified sources on wine-hq and wine-stage. There are no my patches at all. All settings are the same, just changed wine prefix. The logs difference is probably in this line ---- fixme:win:EnumDisplayDevicesW ((null),0,0x33f42c,0x00000000), stub! ---- -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 19

[Bug 40658] New: Joystick POW hat switch rotated for JOYDEVDRIVER=(js) while JOYDEVDRIVER=(event) is Ok
by wine-bugs＠winehq.org Oct. 21, 2021

Oct. 21, 2021

https://bugs.winehq.org/show_bug.cgi?id=40658 Bug ID: 40658 Summary: Joystick POW hat switch rotated for JOYDEVDRIVER=(js) while JOYDEVDRIVER=(event) is Ok Product: Wine Version: 1.9.9 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-dinput Assignee: wine-bugs(a)winehq.org Reporter: otty(a)gmx.net Distribution: --- I have a Saitek AV8R-01 joystick with a POV hat switch. When using the JOYDEVDRIVER=(event) device (dinput/joystick_linuxinput.c), the orientation is Ok both in the Wine Control Panel (control.exe) Joystick test POV area and in the games, i.e when moving the hat switch horizontally to the right the indicator moves towards the right, when moving the hat switch vertically up, the indicator moves up. Hoever the JOYDEVDRIVER=(js) device (dinput/joystick_linux.c) has its orientation mixed up: * when moving the hat switch horizontally to the right the indicator moves down. * when moving the hat switch vertically up, the indicator moves left. This happens on wine-1.9.9 on Ubuntu 14.04 (LTS) installed from http://ppa.launchpad.net/wine/wine-builds/ubuntu trusty main, but is also present in earlier versions, e.g. 1.6.1 Unfortunately I need to use the (js) device as I cannot get the game to recognise the rudder and thrust axes with the (event) device. (BTW, does the (event) device recognize the [HKEY_CURRENT_USER\Software\Wine\DirectInput] registry key in the same way as teh (js) device?) BR, -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 37

[Bug 44590] New: incorrect rendering in The Witness (ATOC?)
by wine-bugs＠winehq.org Oct. 21, 2021

Oct. 21, 2021

https://bugs.winehq.org/show_bug.cgi?id=44590 Bug ID: 44590 Summary: incorrect rendering in The Witness (ATOC?) Product: Wine Version: 3.2 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: notasas(a)gmail.com Distribution: --- Created attachment 60571 --> https://bugs.winehq.org/attachment.cgi?id=60571 bad rendering The Witness is still not rendering correctly in some cases (as of 7be8beab68c5): - objects in the water reflections are missing transparencies regardless of MSAA - all objects are missing transparencies with MSAA off perhaps these problems are related. Here is d3d apitrace (different from screenshot, can make a better one if that helps): https://drive.google.com/file/d/1fFCVytDdybsVgZqiTIKS5XseegIO5yzc/view?usp=… -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 9

[Bug 42191] New: Diablo 3 2.4.3 was unable to initialize D3D
by wine-bugs＠winehq.org Oct. 20, 2021

Oct. 20, 2021

https://bugs.winehq.org/show_bug.cgi?id=42191 Bug ID: 42191 Summary: Diablo 3 2.4.3 was unable to initialize D3D Product: Wine Version: 2.0-rc4 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: nfamail(a)gmail.com Distribution: --- Created attachment 56824 --> https://bugs.winehq.org/attachment.cgi?id=56824 Diablo 3 Debug Log When I try to run the game in 64 bit after that I get the grey screen and the error creating d3d. Click ok a couple of times and it then gives you the option to retry/cancel and will do nothing. If you go to the battle.net app and go to game settings and change it to "Open game with 32-bit version instead" it will open just fine... Winehq 2.0-rc4 Ubuntu 16.04 64bit (latest updates) Intel® Core™ i7-4510U CPU @ 2.00GHz × 4 GeForce 840M/PCIe/SSE2 Battle.net 1.6.0.8265 (2.9.2.5362) Diablo 3 2.4.3.42934 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 41

[Bug 21564] New: warning forever ignores keyboard input after losing/regaining focus
by wine-bugs＠winehq.org Oct. 20, 2021

Oct. 20, 2021

http://bugs.winehq.org/show_bug.cgi?id=21564 Summary: warning forever ignores keyboard input after losing/regaining focus Product: Wine Version: 1.1.37 Platform: x86 URL: http://www18.big.or.jp/~hikoza/Prod/index_e.html OS/Version: Linux Status: NEW Keywords: download Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: madewokherd(a)gmail.com Steps to reproduce: * Install Warning Forever from the linked website. * Start the program by running c:\wf\wf.exe. (The installer does not create a shortcut. This is the same on Windows.) * Select "Window mode". * Verify that the 'z' key can be used to make selections in the menu. * Switch to another window. * Switch back to Warning Forever window. * Verify that keyboard input no longer works. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 22

[Bug 22369] New: A child window without WS_EX_MDICHILD style should not be tiled by the WM_MDITILE message.
by wine-bugs＠winehq.org Oct. 20, 2021

Oct. 20, 2021

http://bugs.winehq.org/show_bug.cgi?id=22369 Summary: A child window without WS_EX_MDICHILD style should not be tiled by the WM_MDITILE message. Product: Wine Version: unspecified Platform: All OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: user32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: a.m.winehq(a)gmail.com In user32/mdi.c -> MDITile -> #L763(wine-1.1.42) for-loop "remove all the windows we don't want", the windows without WS_EX_MDICHILD window style should be also removed from win_array. MDICascade is also. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 37

[Bug 24352] New: Virtual desktop does not respect modeless child window Z-order
by wine-bugs＠winehq.org Oct. 20, 2021

Oct. 20, 2021

http://bugs.winehq.org/show_bug.cgi?id=24352 Summary: Virtual desktop does not respect modeless child window Z-order Product: Wine Version: 1.3.2 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: multitude(a)internode.on.net 1. Run 'winecfg' and ensure the 'Graphics -> Emulate a virtual desktop' option is off. 2. Press the OK button to apply any changes and close 'winecfg'. 2. Run 'wine notepad' and search for text (Ctrl-F). 3. Leaving the 'Find' window open, mouse click the main 'Notepad' window. CORRECT RESULT: The 'Notepad' window becomes active, the 'Find' child window becomes inactive and remains in front of the main 'Notepad' window. 4. Exit 'notepad', run 'winecfg' and enable the 'Graphics -> Emulate a virtual desktop' option. 5. Press the OK button to apply the change and close 'winecfg'. 6. Run 'wine notepad' again and search for text (Ctrl-F). 7. Leaving the 'Find' window open, mouse click the main 'Notepad' window. INCORRECT RESULT: When the 'Notepad' window becomes active the 'Find' window disappears behind the 'Notepad' window. Confirmed in Wine 1.3.2 and Wine 1.2. Bug found when testing Chessmaster Grandmaster Edition. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 18

[Bug 39640] New: taskmgr: "End Process Tree" is unimplemented
by wine-bugs＠winehq.org Oct. 20, 2021

Oct. 20, 2021

https://bugs.winehq.org/show_bug.cgi?id=39640 Bug ID: 39640 Summary: taskmgr: "End Process Tree" is unimplemented Product: Wine Version: 1.7.52 Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: programs Assignee: wine-bugs(a)winehq.org Reporter: fgouget(a)codeweavers.com Distribution: --- Wine's Taskmgr tool offers to terminate all the processes in a process tree (End Process Tree) but that function is in fact not implemented. More precisely it does the exact same thing as 'End Process', i.e. it kills the specified process but not its children. As proof, compare the implementation of ProcessPage_OnEndProcessTree() with ProcessPage_OnEndProcess() in programs/taskmgr/endproc.c. Both functions are identical. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 5