April 2021 - Wine-Bugs - list.winehq.org

[Bug 45587] New: wine fails to install dragon naturally speaking 15
by wine-bugs＠winehq.org April 28, 2021

April 28, 2021

https://bugs.winehq.org/show_bug.cgi?id=45587 Bug ID: 45587 Summary: wine fails to install dragon naturally speaking 15 Product: Wine Version: 3.13 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: susancragin(a)earthlink.net Distribution: --- Created attachment 62012 --> https://bugs.winehq.org/attachment.cgi?id=62012 backtrace from failed install Dragon Naturally Speaking 15 does not install. Here's what I do. Start with a 32bit wine prefix. Install dotnet40 When that is finished, set the program version to Windows 7, which is the lowest configuration that will run NatSpeak 15. The program starts out by requesting dotnet 452. This is not a problem provided dotnet 40 is installed. It makes changes and goes on. Then it asks for preliminary information, such as what type of English I want to speak, and so on. Then the installation hangs. Notes: the installation does not work with mono. It also does not work installing dotnet from the installation disk, even though a complete copy is included with the installation disk. And it doesn't work installing dotnet452 with winetricks. I have the feeling that this may not be a bug as much as an issue that hasn't been addressed yet. These are the last lines of the terminal output, and I have attached the dump. 0270:fixme:advapi:DeregisterEventSource (0xcafe4242) stub Unhandled Exception: 0270:fixme:ver:GetCurrentPackageId (0x33b890 (nil)): stub 0270:fixme:ntdll:EtwEventRegister ({8e9f5090-2d75-4d03-8a81-e5afbf85daf1}, 0x33804b6, (nil), 0x10e6844) stub. System.IO.FileNotFoundException: Could not load file or assembly 'System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. File not found. at customactions.Program.ChangeAppStartingCursor() at customactions.Program.Main(String[] args) wine: Unhandled exception 0xe0434352 in thread 270 at address 0x7b43c7dc (thread 0270), starting debugger... 02e5:err:ntdll:RtlpWaitForCriticalSection section 0x7bd176e0 "virtual.c: csVirtual" wait timed out in thread 02e5, blocked by 02f1, retrying (60 sec) -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 15

[Bug 47685] New: winecfg: audio test fails with error on cmd line
by wine-bugs＠winehq.org April 28, 2021

April 28, 2021

https://bugs.winehq.org/show_bug.cgi?id=47685 Bug ID: 47685 Summary: winecfg: audio test fails with error on cmd line Product: Wine Version: 1.6.2 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: normt40pa(a)yahoo.com Distribution: --- When using winecfg and then clicking tab audio, Evering seems good here until I use the test audio button. I don't compile software ie to copile the new version of wine. I use what is available on ubuntu.... The problem arises when I click test audio giving me on the command line error "err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded" only. No other info after this since I have looked in the forum for similar errors and none math the solo line as described above (usually combine with a specific error type after this line. Please advise... -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 3

[Bug 51072] New: Cant Install SQL Server 2012
by WineHQ Bugzilla April 28, 2021

April 28, 2021

https://bugs.winehq.org/show_bug.cgi?id=51072 Bug ID: 51072 Summary: Cant Install SQL Server 2012 Product: Wine-staging Version: 6.6 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: ridhoarmand(a)yahoo.com CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com Distribution: --- Please fix, i want to install Visual Studio Ultimate 2012 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 4

[Bug 51071] New: Microsoft Access 365 Runtime setup fails with error 30088-4
by WineHQ Bugzilla April 27, 2021

April 27, 2021

https://bugs.winehq.org/show_bug.cgi?id=51071 Bug ID: 51071 Summary: Microsoft Access 365 Runtime setup fails with error 30088-4 Product: Wine Version: 6.7 Hardware: x86-64 OS: Linux Status: NEW Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: alexhenrie24(a)gmail.com Distribution: --- Created attachment 69935 --> https://bugs.winehq.org/attachment.cgi?id=69935 Terminal output To reproduce: 1. Run `wine OfficeSetup.exe` 2. Wait 10 minutes The setup program appears to stall, but eventually a new window pops up with the message "Error Code: 30088-4". The problem is reproducible with both the 32-bit and the 64-bit version of the Access runtime. $ sha256sum OfficeSetup.exe # 64-bit version 4b390ddefbc1d5f275842321aff5b823f2df58638305f7dbbaf9dbc4fd1ad9d5 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 1

[Bug 2948] WM_CTLCOLOREDIT & LISTBOX return ignored and pen bug
by WineHQ Bugzilla April 27, 2021

April 27, 2021

https://bugs.winehq.org/show_bug.cgi?id=2948 --- Comment #23 from winetest(a)luukku.com --- still not working as expected, wine 5.0 (Ubuntu 5.0-3ubuntu1) I don't have newer wine installed. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 0

[Bug 24624] New: Audacity 1.3.12 treats all file type selections as "all files" when exporting
by wine-bugs＠winehq.org April 27, 2021

April 27, 2021

http://bugs.winehq.org/show_bug.cgi?id=24624 Summary: Audacity 1.3.12 treats all file type selections as "all files" when exporting Product: Wine Version: 1.3.4 Platform: x86-64 URL: http://audacity.sourceforge.net/ OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: RandomAccountName(a)mail.com Created an attachment (id=31111) --> (http://bugs.winehq.org/attachment.cgi?id=31111) Terminal output In Audacity, open an audio file and then go to file -> export. On this file dialog, any selection from the "files of type" drop-down list will (apparently) be treated as "all files", which leads to two minor annoyances: 1. DLLs and other unrelated file types will be listed while browsing for a destination folder. (This doesn't happen immediately when the dialog opens, only after changing the destination directory and/or file type.) 2. If the file extension isn't specified manually, Audacity will try to append ".*" to the end of the file name and then warn that this is a non-standard extension for this type of file. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 10

[Bug 51068] New: winecfg doesn't open if using the intel xorg driver
by WineHQ Bugzilla April 26, 2021

April 26, 2021

https://bugs.winehq.org/show_bug.cgi?id=51068 Bug ID: 51068 Summary: winecfg doesn't open if using the intel xorg driver Product: Wine Version: 6.7 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: ak-su(a)iname.com Distribution: --- Created attachment 69929 --> https://bugs.winehq.org/attachment.cgi?id=69929 winecfg 6.7 opening problem with intel xorg driver If I am using the intel xorg driver with xorg: Driver "intel" # xorg config snippet winecfg from winehq-devel 6.7 is not able to open its window. If I change to using the modesetting xorg driver in Fedora 33, winecfg 6.7 opens properly. But if I install winehq-stable 5.0.4-4.1, winecfg works just fine. (In the attached log, I press ctrl+c at line 18) -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 1

[Bug 50867] New: wine start /unix stopped working in 6.5
by WineHQ Bugzilla April 26, 2021

April 26, 2021

https://bugs.winehq.org/show_bug.cgi?id=50867 Bug ID: 50867 Summary: wine start /unix stopped working in 6.5 Product: Wine Version: 6.5 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: duck(a)duckcorp.org Distribution: --- Quack, I just upgraded to 6.5 using WineHQ's Debian packages. My computer is using Debian unstable. When starting my games using start /unix I now get: (leaving out fixme:font:opentype_enum_font_names lines) $ wine start /unix $WINEPREFIX/drive_c/GOG\ Games/Risen\ 3\ -\ Titan\ Lords/LanguageSetup.exe Application could not be started, or no application associated with the specified file. ShellExecuteEx failed: File not found. If I remove start /unix in this case it works but not all programs will be happy with this unless I manually go into the right workdir, that is why I use this feature as recommended in the user's guide. 6.4 worked fine and many versions before. I did not see anything about this in the news and changelog. Has anything changed? Regards. \_o< -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 24

[Bug 49138] New: winegcc: argc and argv arguments of main() get corrupted
by WineHQ Bugzilla April 26, 2021

April 26, 2021

https://bugs.winehq.org/show_bug.cgi?id=49138 Bug ID: 49138 Summary: winegcc: argc and argv arguments of main() get corrupted Product: Wine Version: 5.7 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: tools Assignee: wine-bugs(a)winehq.org Reporter: mail(a)robbertvanderhelm.nl Distribution: --- I first came across this issue with winelib compilation in Wine 5.7 while I was working on yabridge, a Wine VST bridge. The issue still persists on the latest commit in the Wine repository as I'm writing this (commit bf1abba, with the release of Wine 5.8). I'm not exactly sure what is going on, but the issue can be reproduced as follows: #include <iostream> int main(int argc, char* argv[]) { std::cout << "argc = " << argc << std::endl; std::cout << "argv[0] = " << argv[0] << std::endl; } If you compile the above (or the C-equivalent) with `wineg++ test.cpp -o test` and run test.exe, then at least on my system it will always print 70624 as the value of argc and some uninitialized looking data for argv[0]. This happens regardless of whether the program receives any command line arguments or not. Winelib applications compiled with the toolchain that comes with Wine 5.6 can be run without problems under Wine 5.7 or 5.8. The winelib compilation issue with Wine 5.7+ exists on Ubuntu 18.04, Ubuntu 20.04, Arch Linux and Manjaro, both when using the distro provided packages and when building Wine from source. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 3

[Bug 51002] New: Wined3d: nothing is presented in 3D window.
by WineHQ Bugzilla April 26, 2021

April 26, 2021

https://bugs.winehq.org/show_bug.cgi?id=51002 Bug ID: 51002 Summary: Wined3d: nothing is presented in 3D window. Product: Packaging Version: unspecified Hardware: x86-64 OS: Windows Status: UNCONFIRMED Severity: normal Priority: P2 Component: wine-packages Assignee: wine-bugs(a)winehq.org Reporter: acyellow(a)gmail.com CC: dimesio(a)earthlink.net Created attachment 69845 --> https://bugs.winehq.org/attachment.cgi?id=69845 d3d-error-log OS: Windows OS GPU is Nvidia and driver is installed correctly. Use Wine dll to replace the original Windows dll, including d3d9.dll, d3d11.dll, wined3d.dll, dxgi.dll. Run the following D3D11 test case, the failed frame is attached. Nothing is presented in the 3D window. There are error logs which is attached. C:\Program Files (x86)\Microsoft DirectX SDK (June 2010)\Samples\C++\Direct3D11\Bin\x64\FluidCS11.exe Any question or suggestion is welcome. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 5