October 2022 - Wine-Bugs - list.winehq.org

[Bug 53633] New: Visual Novel Ninki Seiyuu no Tsukukurikata crashes on start throwing failed to call ConnectFilters (pSrc, pMPEG1Splitter)
by WineHQ Bugzilla Oct. 7, 2022

Oct. 7, 2022

https://bugs.winehq.org/show_bug.cgi?id=53633 Bug ID: 53633 Summary: Visual Novel Ninki Seiyuu no Tsukukurikata crashes on start throwing failed to call ConnectFilters (pSrc, pMPEG1Splitter) Product: Wine Version: 7.16 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: quartz Assignee: wine-bugs(a)winehq.org Reporter: bugmetoo(a)protonmail.com Distribution: --- Created attachment 73031 --> https://bugs.winehq.org/attachment.cgi?id=73031 Crash log in a freshly created Wine Prefix On trying to launch the game, the game throws the following message "failed to call ConnectFilters (pSrc, pMPEG1Splitter).:[0x80004005] Error: 0x80004005" and application crashes. Running winetricks quartz fixes the issue. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 5

[Bug 9127] Multiple applications require system stream support in the MPEG-I splitter (Drome Racers, Ninki Seiyuu no Tsukukurikata)
by WineHQ Bugzilla Oct. 7, 2022

Oct. 7, 2022

https://bugs.winehq.org/show_bug.cgi?id=9127 Alberto Salvia Novella <es20490446e(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |es20490446e(a)gmail.com --- Comment #106 from Alberto Salvia Novella <es20490446e(a)gmail.com> --- *** Bug 53726 has been marked as a duplicate of this bug. *** -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 0

[Bug 53718] New: WoW Beta/PTR get "Your 3D accelorator card is not supported"
by WineHQ Bugzilla Oct. 6, 2022

Oct. 6, 2022

https://bugs.winehq.org/show_bug.cgi?id=53718 Bug ID: 53718 Summary: WoW Beta/PTR get "Your 3D accelorator card is not supported" Product: Wine Version: 7.17 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: mckittrick.kaminski(a)gmail.com Distribution: --- Created attachment 73148 --> https://bugs.winehq.org/attachment.cgi?id=73148 Collection of Retail and Beta logs. I had be playing/testing the new Dragonflight expansion for WoW recently, and after this week's update, the game no longer launches, with the age old "Your 3D accelerator card is not supported" error. Research on previous occurrences of this error have been fruitless, usually having something to do with multiple GPUs and having the wrong one assigned. Being that the WoW client updating was the only change to cause this issue, and native Windows clients seem to have no issue, I can't help but think this lies somewhere in wine, dxvk, or vkd3d namespace. For information on my environment, I'm running via Lutris, and have tried both Lutris and Wine runners, a few releases from 5.x, 6.x, and 7.x, up to 7.17 staging. I'm using dxvk v1.10.3 and vkd3d v2.6. My graphics card is 3060Ti, and I get the error with both the 470xx and 515 nvidia drivers. The 3060Ti is the only VGA controller in my system, and I'm running Arch 5.19.9. Manually setting the 'gxApi "D3D11"' config line in Config.wtf doesn't change the behavior, which applies to D3D11, D3D11_LEGACY, as well as D3D12. I'll note that this error only occurs with Beta and PTR clients. (PTR is open to everyone, if you'd like to test, not sure if you need gametime). Retail and Classic both work just fine and haven't any issue, although, I've noticed the in-game option to use D3D12 has disappeared, leaving me with only D311 options. It used to be there, and I'm unsure when the option left. I've attached logs from both Beta and Retail, let me know what else I can provide/test for y'all. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 30

[Bug 53763] New: eSword crashes when changing fonts, throws Text Control error on newer bible modules
by WineHQ Bugzilla Oct. 6, 2022

Oct. 6, 2022

https://bugs.winehq.org/show_bug.cgi?id=53763 Bug ID: 53763 Summary: eSword crashes when changing fonts, throws Text Control error on newer bible modules Product: Wine Version: 7.18 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: thegamemaster(a)hotmail.com Distribution: --- eSword found here: https://www.e-sword.net/files/e-sword_1220_setup.exe Using Wine 7.18 on Fedora 36 KDE Spin. This behavior is observed on several different machines including high end AMD 3900XT gaming system and low end Dell 1540 laptop. eSword 12.2.0 works fine under Wine 6.0.4 and does not exhibit these behaviors. When you click on certain newer bible modules it throws an error; "Error: 20058 Unexpected Text Control error. (1-1d03) This only happens on newer bible modules: LSB, LSB+, NASB, NASB+, ESV, ESV+,CSB, and TPT. If you click OK on the error message, the font colors change to black on gray, hard to see, and none of the "Perascope" links work, but the greek/hebrew Strongs Number links still work. Older bible modules work fine, including some with Parascope links such as NASB95, NASB95+. On the menu bar, if you click on Options, then on Font Settings... the program crashes. On the menu bar, if you click on Options, then on App Theme, and select any Theme the program locks up and must be forced to Terminate. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 1

[Bug 48912] New: Allow blacklisting unreliable and always new failures
by WineHQ Bugzilla Oct. 6, 2022

Oct. 6, 2022

https://bugs.winehq.org/show_bug.cgi?id=48912 Bug ID: 48912 Summary: Allow blacklisting unreliable and always new failures Product: Wine-Testbot Version: unspecified Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: unknown Assignee: wine-bugs(a)winehq.org Reporter: fgouget(a)codeweavers.com Distribution: --- A number of tests produce false positives because: * Either the failure message contains a value that changes with each run (e.g. an HWND). In some cases these values are really necessary for diagnosis and moving them to a separate line would make the code quite a bit more complex. * Or the test fails intermittently and is hard to fix. Sometimes the cause of the failures may also come from external factors such as bugs in QEmu (for instance long execution delays causing timeouts). * Sometimes the intermittent failure is the product of a new Windows version or configuration, which requires investigating before a fix is found. In all cases the tests should be fixed eventually, but a solution is needed for the interim so these tests to not make the TestBot so unreliable that its results are ignored. So the goal is to provide a way to blacklist some test failures so they do not cause a patch to be rejected. Some safeguards are needed to ensure that: * Failures are not blacklisted lightly. The preference should always be to fix the test. * The blacklist does not get so large that it becomes hard to maintain. * Once a test is fixed the corresponding blacklist entries are removed in a timely fashion. * There is still an incentive to fix the tests. So here is a proposal for implementing this blacklist: * Each blacklist entry should be associated with a Wine bug describing the issue. That bug should provide some minimal diagnosis: whether it's a new Windows behavior, a race condition or some issue that was reported to QEmu. That would ensure we know why the blacklist entry was added. One could also check the status of the bug when reviewing the blacklist entries. A closed bug would be a strong hint that the blacklist entry is no longer needed. * Rather than blacklisting whole test units, blacklist entries should target specific test failures via a regular expression. Besides being finer grained this would be useful for cases like user32:win which has different issues depending on the locale and where each should be linked to a different bug (bugs 48815, 48819 and 48820). * The TestBot should record when each blacklist entry was last used. This relies on having the above regular expression since without it the TestBot would not know anything beyond 'the test unit was run and had failures'. Also the regular expression would only be used against *new* failures. So this would really record the last time the blacklist entry was actually useful. An entry that was unused for a long time would be a prime candidate for reviewing the corresponding bug and for removal. (Note: The blacklist would also be used on WineTest reports so it would get a chance of matching its target at least 5 days / week). * The blacklist entries would only be needed for 'base' test configurations since they are the only ones wine-devel patches run on. * There should be a page listing the blacklist entries so developers have a good starting point to work on them. * Ideally the blacklist page would also point to the tasks where the blacklist was last used. Since most of the blacklisted failures are either intermittent or specific to a given test configuration this would make it easier for developers to find reports where the failure did happen. Note that Wine VMs often test multiple configurations per task (e.g. wow32 and wow64, different locales), each producing its own test report. So pointing at just the task would leave the developer guessing which report should be looked at. But that may be sufficient guidance. * (test:unit, testbot-vm) tuples make it impossible to target a specific Wine test configuration such as a specific locale since they all run on the same VM. Similarly it would make blacklisting bitness-blind on Windows VMs. If necessary the tuple could be extended either with the specific mission the blacklist applies to, or with the basename of the corresponding report (the latter being easier to use in comparisons). Whether that's practical and worth the effort remains to be determined. One complication for instance is that this would lead to more blacklist entries: many 64 bit VMs would need two entries, one for 32 bit tests and one for 64 bit tests. * Pseudo database schema and sample use: FailureBlacklists ----------------- PK Bug 48815 PK TestModule user32 PK TestUnit win Name 0x738 message FailureRegExp Test failed: hwnd [0-9A-F]{8,16} message 0738 LastUse 2020-03-27 FailureBlacklistVMs ------------------- PK Bug 48815 PK TestModule user32 PK TestUnit win PK VMName Entries for w1064v1709, w1064v1809, etc. (48815, user32, win, w1064v1709) (48815, user32, win, w1064v1809) (48815, user32, win, w1064v1809_2scr) ... FailureBlacklistUses (optionally) --------------------------------- PK Bug PK TestModule PK TestUnit PK JobId PK StepNo PK TaskNo (48815, user32, win, 68507, 1, 7) (48815, user32, win, 68508, 1, 7) ... -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 5

[Bug 48209] New: Ignore random parts of test failure messages
by WineHQ Bugzilla Oct. 6, 2022

Oct. 6, 2022

https://bugs.winehq.org/show_bug.cgi?id=48209 Bug ID: 48209 Summary: Ignore random parts of test failure messages Product: Wine-Testbot Version: unspecified Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: unknown Assignee: wine-bugs(a)winehq.org Reporter: fgouget(a)codeweavers.com Distribution: --- The TestBot needs to detect if a patch introduces NEW test failures. To do so it compares the failure messages with those from reference WineTest runs. But in some cases part of the message changes from one run to the next, causing the failure to look new. Of course in all cases the ideal solution is to fix the test so it does not fail. Barring that there are also cases where the varying value is not really useful (e.g. handle or pointer values) and in that case it should just be removed from the message. But there may be cases where knowing the value is still useful. So one solution would be to tag such values so the TestBot knows it can ignore them when comparing failure messages. For instance they could be enclosed in double braces, curly braces, or other. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 5

[Bug 53759] New: FPGA Programmer can't open port
by WineHQ Bugzilla Oct. 6, 2022

Oct. 6, 2022

https://bugs.winehq.org/show_bug.cgi?id=53759 Bug ID: 53759 Summary: FPGA Programmer can't open port Product: Wine Version: unspecified Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: 7Cattac(a)gmail.com Distribution: --- Created attachment 73229 --> https://bugs.winehq.org/attachment.cgi?id=73229 output log I'm trying to use FPGA Programmer (https://www.fpga-cores.com/software/fpga-programmer/) to broadcast UPD packages to my FPGA. Starting it up has no issues, but when it depends a device in the network it hangs for a couple of minutes and the app runs very slowly. Trying to upload a .bin takes a long time and gives an error saying "can't open port", when that happens "010c:fixme:progress:ProgressWindowProc state 2 not yet handled" is spammed in the logs. Wine version: Wine-staging 7.18 FPGA Programmer version: 1.1 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 1

[Bug 53758] New: Prototype freezes and crashes after intro/in menu
by WineHQ Bugzilla Oct. 4, 2022

Oct. 4, 2022

https://bugs.winehq.org/show_bug.cgi?id=53758 Bug ID: 53758 Summary: Prototype freezes and crashes after intro/in menu Product: Wine Version: 7.16 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: odecif(a)gmail.com Distribution: --- Created attachment 73228 --> https://bugs.winehq.org/attachment.cgi?id=73228 Execution log After a fresh install from DVD-disc on a clean 64-bit prefix, if I run the game using "WINEPREFIX=<prefix> wine prototypef.exe" in the games installation folder, the game start up showing a cinematic of some license-text and the developers logo and transfers to the games main menu. Here a modal shows with some information regarding save game and here is when the game freezes. winetricks dxvk removes said freeze and the game is playable. GTX 760M i5-6300HQ Budgie DE Manjaro 22 Kernel 5.4.212-1 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 0

[Bug 52689] New: NVCUDA: Daz Studio 4.20 and CUDA SDK11 implementation
by WineHQ Bugzilla Oct. 4, 2022

Oct. 4, 2022

https://bugs.winehq.org/show_bug.cgi?id=52689 Bug ID: 52689 Summary: NVCUDA: Daz Studio 4.20 and CUDA SDK11 implementation Product: Wine-staging Version: 7.4 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: cybermax(a)dexter.no CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com Distribution: --- Created attachment 72031 --> https://bugs.winehq.org/attachment.cgi?id=72031 Series of patches to implement basic SDK11 functionality Recently DAZ Studio4 updated to 4.20 and the Iray engine also got updated to the point it requires support for CUDA 11.4 I have worked through a great deal of the issues regarding support for SDK 11.4, aside from the D3D9/10/11 elements that have no equivalent Linux support. The result is adding a few functions to the nvcuda implementation in wine-staging. (Attachment with a series of 4 patches). I have not yet been able to get SDK 11.6 samples to run, as this will (for now) fail the CUDA runtime validation.. but DAZ Studio 4.20.1 is running fine. 2022-03-17 22:24:11.731 Iray [INFO] - IRAY:RENDER :: 1.1 IRAY rend info : NVIDIA display driver version: 510.54 2022-03-17 22:24:11.732 Iray [INFO] - IRAY:RENDER :: 1.1 IRAY rend info : Your NVIDIA driver supports CUDA version up to 11.6; iray requires CUDA version 11.4; all is good. 2022-03-17 22:24:11.732 Iray [INFO] - IRAY:RENDER :: 1.1 IRAY rend info : Using iray plugin version 5.3, build 349500.7063 n, 18 Jan 2022, nt-x86-64-vc142. 2022-03-17 22:24:11.768 Iray [INFO] - IRAY:RENDER :: 1.1 IRAY rend info : CUDA device 0 (NVIDIA GeForce RTX 2070): compute capability 7.5, 7.773 GiB total, 7.229 GiB available, display attached I have built and run the main demo samples from the cuda-samples source github, aswell as 30 some samples in addition to that, compiled with VS2019 and using the SDK11.4 runtime library. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 2

[Bug 53753] New: TikTok Live studio will not run
by WineHQ Bugzilla Oct. 2, 2022

Oct. 2, 2022

https://bugs.winehq.org/show_bug.cgi?id=53753 Bug ID: 53753 Summary: TikTok Live studio will not run Product: Wine Version: 5.0 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: erik(a)dansbo.dk Distribution: --- Created attachment 73219 --> https://bugs.winehq.org/attachment.cgi?id=73219 backtrace of error from wine TikTok Live Studio crashes before even starting up. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 2