September 2024 - Wine-Bugs - list.winehq.org

[Bug 54381] New: tightvnc viewer crashes on incoming connection
by WineHQ Bugzilla Feb. 17, 2026

Feb. 17, 2026

https://bugs.winehq.org/show_bug.cgi?id=54381 Bug ID: 54381 Summary: tightvnc viewer crashes on incoming connection Product: Wine Version: 8.0-rc3 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: wine(a)axeitado.com Distribution: --- Created attachment 73948 --> https://bugs.winehq.org/attachment.cgi?id=73948 Backtrace, 64bits version. $ wine --version wine-8.0-rc3 (Debian 8.0~rc3~repack-1) The crash happens when the connection is established and the remote screen is about to appear on the viewer. For instance, when the remote server connects to the viewer with a reverse connection: $ wine tvnviewer.exe -listen c:\> tvnserver.exe -run c:\> tvnserver.exe -controlapp -connect <viewer-host-address> wine: Unhandled page fault on write access to 0000000000000000 at address 000000014007D22D (thread 0110), starting debugger... 0108:err:sync:RtlpWaitForCriticalSection section 0000000001D77BF8 (null) wait timed out in thread 0108, blocked by 010c, retrying (60 sec) The above example uses the reverse connection method, which is straightforward to setup. When the viewer connects to a listening remote server the same crash occurs: c:\> rem the server must be properly configured: c:\> tvnserver.exe -run $ wine tvnviewer.exe <remote-server-address> wine: Unhandled page fault on write access to 0000000000000000 at address 000000014007D22D (thread 010c), starting debugger... 0108:err:sync:RtlpWaitForCriticalSection section 0000000001D77BF8 (null) wait timed out in thread 0108, blocked by 010c, retrying (60 sec) This worked until very recently, 7.0.1~repack-1 was fine (this is Debian Testing). The software is licensed under the GPL and binaries can be downloaded on the author's homepage (currently at version 2.8.63): https://www.tightvnc.com/download.php The 32 bit version also crashes. Backtrace attached. It looks like the problem is related to starting a thread. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 18

[Bug 56825] New: Unable to see screen for Harmony Assistant version 9.9.8d (64 bit)
by WineHQ Bugzilla Feb. 17, 2026

Feb. 17, 2026

https://bugs.winehq.org/show_bug.cgi?id=56825 Bug ID: 56825 Summary: Unable to see screen for Harmony Assistant version 9.9.8d (64 bit) Product: Wine Version: 9.0 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: dheorchestra(a)gmail.com Distribution: --- Created attachment 76632 --> https://bugs.winehq.org/attachment.cgi?id=76632 screen shot of installed Harmony Assistant 9.9.8d (64 bit). Cannot see installed program screen. I am using Linux Lite 7.0 Download Link for Harmony Assistant version 9.9.8d (64 bit) https://www.myriad-online.com/en/products/harmony.htm When running a new installation of the Windows version of Harmony Assistant v9.9.8d (64-bit) all I receive is a black screen with little white dots on it when the program is installed. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 16

[Bug 34427] New: Star Citizen launcher has several graphics issues
by wine-bugs＠winehq.org Feb. 17, 2026

Feb. 17, 2026

http://bugs.winehq.org/show_bug.cgi?id=34427 Bug #: 34427 Summary: Star Citizen launcher has several graphics issues Product: Wine Version: 1.7.1 Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: adys.wh(a)gmail.com Classification: Unclassified Created attachment 45828 --> http://bugs.winehq.org/attachment.cgi?id=45828 Screenshot on wine-1.7.1 Lots of hsls/d3dcompiler spam: err:d3dcompiler:compile_shader HLSL shader parsing failed. fixme:hlsl_parser:hlsl_parse Check for valued return on void function. fixme:hlsl_parser:hlsl_parse Implicit conversion to the return type if needed, error out if conversion not possible. fixme:hlsl_parser:hlsl_parse Check for valued return on void function. fixme:hlsl_parser:hlsl_parse Implicit conversion to the return type if needed, error out if conversion not possible. fixme:hlsl_parser:declare_vars Complex initializers are not supported yet. fixme:d3dcompiler:make_assignment Check for casts in the lhs. err:d3dcompiler:compile_shader HLSL shader parsing failed. fixme:hlsl_parser:hlsl_parse Array. fixme:d3dcompiler:make_assignment Check for casts in the lhs. fixme:d3dcompiler:make_assignment Check for casts in the lhs. fixme:hlsl_parser:hlsl_parse Array. err:d3dcompiler:compile_shader HLSL shader parsing failed. Screenshots and log attached -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 8

[Bug 56648] New: Autodesk DWG TrueView fails at installation
by WineHQ Bugzilla Feb. 17, 2026

Feb. 17, 2026

https://bugs.winehq.org/show_bug.cgi?id=56648 Bug ID: 56648 Summary: Autodesk DWG TrueView fails at installation Product: Wine Version: 9.8 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: ntdll Assignee: wine-bugs(a)winehq.org Reporter: szatkus(a)gmail.com Distribution: --- Installation fails with the fixme: "Could not find dependent assembly odis.bs.win (1.0.0)" Turns out the installer creates a new folder (%TEMP%/7z0F0512E4) with another installer that apparently is invoked next. The program removes it automatically after crashing, but it could be retrieved by placing `while(1);` next to the fixme or by using a Windows machine. There's the Setup.exe file that has the following manifest in its resources: <?xml version='1.0' encoding='UTF-8' standalone='yes'?> <assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v3"> <security> <requestedPrivileges> <requestedExecutionLevel level='asInvoker' uiAccess='false' /> </requestedPrivileges> </security> </trustInfo> <dependency> <dependentAssembly> <assemblyIdentity type='win32' name='odis.bs.win' version='1.0.0.0' processorArchitecture='*' language='*' /> </dependentAssembly> </dependency> <dependency> <dependentAssembly> <assemblyIdentity type='win32' name='odis.bs.wx' version='1.0.0.0' processorArchitecture='*' language='*' /> </dependentAssembly> </dependency> <dependency> <dependentAssembly> <assemblyIdentity type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*' /> </dependentAssembly> </dependency> <dependency> <dependentAssembly> <assemblyIdentity type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*' /> </dependentAssembly> </dependency> </assembly> >From what I gathered this manifest is used to resolve some required dlls files, but it ultimately fails. The odis.bs.win is resolved by the following algorithm (a comment from the wine code): /* Lookup in <dir>\name.dll * <dir>\name.manifest * <dir>\name\name.dll * <dir>\name\name.manifest * * First 'appdir' is used as <dir>, if that failed * it tries application manifest file path. */ The file it's looking for is in ODIS/odis.bs.win/odis.bs.win.manifest, not in odis.bs.win/odis.bs.win.manifest (name="odis.bs.win"). Where from does Windows get the ODIS part? Well, there's also a file called "Setup.exe.config" with the following content: <configuration> <windows> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <probing privatePath="ODIS"/> </assemblyBinding> </windows> </configuration> It looks that the program should resolve through <dir>/<privatePath>. I added a few prints here and there, and it seems that Setup.exe.config is not loaded by wine at any point. Moving odis.bs.win and odis.bs.wx to the upper folder fixes the problem, although the installation still fails after a while. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 10

[Bug 41267] New: Black ops 2 crashes with "Unhandled exception caught"
by wine-bugs＠winehq.org Feb. 17, 2026

Feb. 17, 2026

https://bugs.winehq.org/show_bug.cgi?id=41267 Bug ID: 41267 Summary: Black ops 2 crashes with "Unhandled exception caught" Product: Wine Version: 1.9.18 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: spleefer90(a)gmail.com Distribution: --- Created attachment 55567 --> https://bugs.winehq.org/attachment.cgi?id=55567 crash log when trying to launch the game(BO2:MP) from Steam Game crashes on startup with the message: "Error during initialization: Unhandled exception caught" -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

3 55

[Bug 57161] New: when starting captvty, it stops saying it has encontered a problem
by WineHQ Bugzilla Feb. 15, 2026

Feb. 15, 2026

https://bugs.winehq.org/show_bug.cgi?id=57161 Bug ID: 57161 Summary: when starting captvty, it stops saying it has encontered a problem Product: Wine Version: 9.0 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: patrick.pochard(a)free.fr Distribution: --- Created attachment 77064 --> https://bugs.winehq.org/attachment.cgi?id=77064 backtrace available when the pb occurs captvty stops saying the is a problem captvty 2.10.8.2 wine 9.0 os linux mint 22 I tried to install 9.15 & 9.16 but the is a dependency issue libx11-dev:i386 and could not find a solution -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 4

[Bug 48872] New: Faststone Image Viewer doesn't show file names
by WineHQ Bugzilla Feb. 14, 2026

Feb. 14, 2026

https://bugs.winehq.org/show_bug.cgi?id=48872 Bug ID: 48872 Summary: Faststone Image Viewer doesn't show file names Product: Wine Version: 5.5 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: phil4000n(a)gmail.com Distribution: --- Created attachment 66805 --> https://bugs.winehq.org/attachment.cgi?id=66805 FSViewer 75 bug description FSViewer75 Wine55 with wine-mono Strangely, in the viewpane the image file names do not appear, while when hovering on an image it does display it. see attached picture -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 6

[Bug 41649] New: OE-Cake physics game starts with black screen on Shader modes
by wine-bugs＠winehq.org Feb. 14, 2026

Feb. 14, 2026

https://bugs.winehq.org/show_bug.cgi?id=41649 Bug ID: 41649 Summary: OE-Cake physics game starts with black screen on Shader modes Product: Wine Version: 1.9.22 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: nlynch77(a)gmail.com Distribution: --- Created attachment 56028 --> https://bugs.winehq.org/attachment.cgi?id=56028 the graphical errors I'm happy that OE-Cake, a fun physics toy that came out around the same time as PowderToy, mostly works fine. The simple graphics modes where each particle is a circle work great, with perfect performance. The game requires no install and starts up instantly. The problem is that the higher graphics modes that use shaders do not work. I have attached a picture for an example. The fire effect is visible on top of a black screen. From previous experience I know that this caused when OE-Cake cannot recognize your graphics card, at least that's how it is caused in Windows on real hardware. I've played some pretty advanced games on WINE so I have a feeling this could be fixed somehow. An alternate failure mode that several users have reported is that the shader modes do work, but in the lower graphics modes each circle representing a particle is replaced by a square making it look like Minecraft. The game can be downloaded here: http://oecake.wikia.com/wiki/OE-Cake_Wiki I've never submitted a bug before so if there's anything I should test or add to this report, let me know. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

3 11

[Bug 51486] New: GuessWhatPresentationPLUS: nw.exe error when starting
by WineHQ Bugzilla Feb. 13, 2026

Feb. 13, 2026

https://bugs.winehq.org/show_bug.cgi?id=51486 Bug ID: 51486 Summary: GuessWhatPresentationPLUS: nw.exe error when starting Product: Wine Version: unspecified Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: iba16876(a)cuoly.com Distribution: --- Created attachment 70321 --> https://bugs.winehq.org/attachment.cgi?id=70321 backtrace log from the nw.exe error installation has worked without problems from the cd, but when I want to start the program comes a white screen and the nw.exe error. backtrace.txt is attached -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 2

[Bug 45277] New: 006b:fixme:vulkan: X11DRV_vkCreateWin32SurfaceKHR Application requires child window rendering , which is not implemented yet!
by wine-bugs＠winehq.org Feb. 13, 2026

Feb. 13, 2026

https://bugs.winehq.org/show_bug.cgi?id=45277 Bug ID: 45277 Summary: 006b:fixme:vulkan:X11DRV_vkCreateWin32SurfaceKHR Application requires child window rendering, which is not implemented yet! Product: Wine Version: 3.9 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: cootacarft(a)gmail.com Distribution: --- Created attachment 61537 --> https://bugs.winehq.org/attachment.cgi?id=61537 Image of Far Cry 5's Arcade Editor not displaying the game, just a white screen. When attempting to launch Far Cry 5 Arcade Editor, I am only able to load into the editor itself, and no the game window - it only displays a white screen. I use DXVK to load the game itself without any errors. DXVK isn't affecting the results of the Arcade Editor as DXVK and the Arcade Editor work fine on Windows. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

3 163