http://bugs.winehq.org/show_bug.cgi?id=10180
Summary: CD-ROM locked
Product: Wine
Version: 0.9.47.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-binary
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jfarroyo82(a)hotmail.com
i tried to install Age Of Empires III from CDs. This game has 3 CDs for
install. When i have finished installing 1st CD i can´t change it. No error
message pops up, just "Insert 2nd CD" but i can´t continue.
When i try to eject CD from Linux it says that other process is using it. After
killing Wine it comes released.
I use Ubuntu 7.10 into a x86 PC
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9646
Summary: C&C Gold: Installer error when installation media is
mounted ISO
Product: Wine
Version: 0.9.44.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-binary
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nodisgod(a)yahoo.com
I am trying to use an ISO image of C&C 95 from an smbfs mount as installer
media. I mounted the ISO image with the mount command on /mnt/isomnt, and I
have configured Wine drives accordingly, adding an entry for the aforementioned
mount point and setting drive type to CD-ROM. After setting Windows version to
Windows 98, I set my current directory in Terminal to /mnt/isomnt, and run wine
setup.exe. The InstallShield launcher loads, but after the installer finishes
unpacking files, a dialog pops up: "Unable to locate necessary files. Please
run Setup.exe from the CD-ROM disc." If the game is installed from an actual
burned CD, there are absolutely no problems. The game can now be obtained for
free from (http://largedownloads.ea.com/pub/misc/c_c/GDI95.iso) and
(http://largedownloads.ea.com/pub/misc/c_c/NOD95.iso).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10385
Summary: Joost fails to start
Product: Wine
Version: 0.9.49.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-binary
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ffm(a)intserverror.com
Created an attachment (id=9065)
--> (http://bugs.winehq.org/attachment.cgi?id=9065)
Joost debug log
Joost fails to start
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9571
Summary: simpleMonitor.exe Program will not start, "A previous
instance of simpleMonitor is already running"
Product: Wine
Version: 0.9.44.
Platform: PC
URL: http://www.smartbridges.com/support/ab.asp
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-binary
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: oglesbym(a)kc.rr.com
CC: oglesbym(a)kc.rr.com
Created an attachment (id=7941)
--> (http://bugs.winehq.org/attachment.cgi?id=7941)
loaddll tracing
This software is freeware, download it at
http://www.smartbridges.com/support/ab.asp it is a small program.
Error: Window pops up when starting simpleMonitor.exe warning that "Previous
instance of simpleMonitor is running, please close it and try again." On
clicking OK, the program exits.
Program is unusable in this state, it has zero functionality because of this
error. There are no helpful fixme warnings.
Possibly helpful info:
* As of version 0.9.44 this program now successfully installs. As of 0.9.43 it
did not install, so big improvement there.
* Some windows users had the same issue, described here
http://www.smartbridges.com/support/faq_ab.asp#46
* Some 3rd party DLL's seem to have been implemented here by the Dart
corporation, as viewed in a +loaddll debug
It's very important to me that this software is working because it's the only
way to manage AirBridge wireless radios and is most of my comany's wireless
infrastructure. I greatly appreciate your efforts in assistance, you guys are
great.
Thank you in advance!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9567
Summary: steam crashes when installed to user's home and there is
a dosdevice symlink to /home/user
Product: Wine
Version: 0.9.44.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-binary
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: michael.s.gilbert(a)gmail.com
i prefer to install games to my home directory, rather than the .wine
directory. however, there is a problem with Valve's steam application when
doing this.
i've set up a symlink to my home directory (so that steam will see the correct
amount of free disk space on that partition)
$ ln -s /home/user /home/user/.wine/dosdevices/h:"
to repoduce this bug, install steam (http://www.steampowered.com) to
/home/user/games. also make sure you've set up the symlink as above. then run
steam with
$ wine /home/user/games/steam.exe
you will get the error
Steam - Fatal Error
Fatal Error: Could not load module 'bin/vgui2.dll'
note that the problem does not occur if the symlink to /home/user is not set
up. however this isn't a solution because steam will refuse to install games
because it thinks that the free space on my / partition is the free space on my
/home partition.
thanks for all the hard work on wine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10312
Summary: Warcraft III freezes while loading a level in wine
0.9.46-48
Product: Wine
Version: 0.9.48.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-binary
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rockorequin(a)hotmail.com
Created an attachment (id=8963)
--> (http://bugs.winehq.org/attachment.cgi?id=8963)
Last 1000 lines of WINEDEBUG
Warcraft III freezes while loading a level ever since wine version 0.9.46,
including up to the latest 0.9.48.
To reproduce:
- Run Warcraft III with the command 'wine war3.exe -opengl'.
- Either start a new campaign or attempt to load a saved level. The level
loading bar gets to approx an inch from the end (on my 15 inch widescreen
monitor) and then nothing further happens.
- You can usually CTRL-C the wine command, but occasionally Gnome freezes and
the system has to be rebooted.
- I have tested with fglrx and open-source video drivers (for an ATI Radeon
mobility 9600 video card). The problem doesn't seem to be related to video
drivers.
- This happens both with compiz effects off and on.
- Using winecfg, I have tried emulating WinXP and Win2000, using ALSA and OSS
drivers, with and without audio emulation, with and without pixel shader, with
and without vertex shader.
- Note that Warcraft III runs fine in wine 0.9.45 using otherwise the same
configuration.
Version information:
wine versions affected: all after 0.9.45, ie 0.9.46, 0.9.47, 0.9.48
latest wine version tested: 0.9.48~winehq0~ubuntu~7.10.1
O/S: Ubuntu 7.10, kernel 2.6.22-14-generic
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10723
Summary: MSVCR80.dll problem with DAZStudio
Product: Wine
Version: unspecified
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: wine-binary
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wolfgang_a_h(a)gmx.at
This bug seems to have haunted many previous wine versions. In this instance it
appears with DAZStudio on Ubuntu 7.04.
Might be a duplicate, but in another discussion it was told to re-open bugs
pertaining to specific applications:
DAZStudio 1.8.1.5 installs ok.
1) wine 0.9.33:
When trying to run, it misses MSVCP80.dll and MSVCR80.dll. I installed those
plus MSVCP80.dll and "Microsoft.VC80.CRT.manifest". (from
www.sweetpotatosoftware.com/files/microsoft.vc80.crt.zip)
As said in various discussions, without the manifest the DLLs fail to load.
DAZStudio then runs, but all GUI elements only appear when hovered with the
mouse and are invisible otherwise, thus rendering the app unusable.
In the hope to tackle this problem, I today upgraded to ...
2) wine 0.9.50:
Install still ok. Issue with missing DLLs the same, which I did expect.
Unfazed, I installed them, but alas it does not work at all now:
With the manifest absent, I get:
fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.VC80.CRT"
fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.VC80.CRT"
err:module:LdrInitializeThunk "MSVCR80.dll" failed to initialize, aborting
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program
Files\\DAZ\\Studio\\DAZStudio.exe" failed, status c0000142
With the manifest installed, I get:
fixme:actctx:parse_assembly_elem wrong version for assembly manifest
fixme:actctx:parse_manifest_buffer failed to parse manifest L"C:\\Program
Files\\DAZ\\Studio\\Microsoft.VC80.CRT.manifest"
fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.VC80.CRT"
fixme:actctx:parse_assembly_elem wrong version for assembly manifest
fixme:actctx:parse_manifest_buffer failed to parse manifest L"C:\\Program
Files\\DAZ\\Studio\\Microsoft.VC80.CRT.manifest"
fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.VC80.CRT"
err:module:LdrInitializeThunk "MSVCR80.dll" failed to initialize, aborting
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program
Files\\DAZ\\Studio\\DAZStudio.exe" failed, status c0000142
And *this* last version was the one that *did* work in 0.9.33.
I followed various advice:
$ winetricks vcrun2005
which does not help.
$ touch Microsoft.VC80.CRT.manifest
which did work in 0.9.33 after copying the DLLs did not help either.
The same goes for
$ wine vcredist_x86.exe
At only one point I read that the manifest should go in "windows/winsxs/" (is
that true? Should it then be found without being present in the working dir?),
but this also to no avail.
I then even tried every possible combination of locations for the "*80.dll"s
and the manifest (i.e. in system32 and the app's dir) - no luck.
What baffles me most is the "wrong version for assembly manifest"-message, I
got DLLs plus manifest out of the same zip-file (see above).
Any new pointers or patches? Unfortunately, this happens on the most recent
version of wine.
BTW, I also tried downgrading DAZStudio to version 1.7.1.9 (the last 1.7.x),
but there the installer just quits shortly after being started without any
error message (!), and that both in wine 0.9.33 and 0.9.50!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9457
Summary: Problem compiling on FreeBSD amd64
Product: Wine
Version: 0.9.34.
Platform: Other
OS/Version: FreeBSD
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: wine-binary
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: andy(a)t-2.net
Created an attachment (id=7789)
--> (http://bugs.winehq.org/attachment.cgi?id=7789)
Build trace
I have problem building on FreeBSD in amd64 (x64 mode). It seems like some
problem with assembler code in wine-loader. Attached is full report from port
build of FreeBSD.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10321
Summary: Excel Viewer 2003 will not launch
Product: Wine
Version: 0.9.48.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: wine-binary
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jwohlers(a)waubonsee.edu
Created an attachment (id=8978)
--> (http://bugs.winehq.org/attachment.cgi?id=8978)
Error Log
Excel Viewer 2003 will not launch at all under Wine 0.9.48.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9851
Summary: Can't run exe's in ubuntu 7.04 64bit
Product: Wine
Version: unspecified
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: wine-binary
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: yvijayakumar(a)aim.com
While running the windows executables using wine in ubuntu 7.04 64 bit OS, user
will automatically log off. Can't run 64 bit or 32 bit windows applications.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.