wine-bugs June 2008

wine-bugs@winehq.org

1 participants
5528 discussions

[Bug 12283] New: Source Insight does not refresh the screen
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=12283 Summary: Source Insight does not refresh the screen Product: Wine Version: 0.9.58. Platform: Other OS/Version: other Status: NEW Keywords: download, regression Severity: normal Priority: P2 Component: winex11.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: scott(a)open-vote.org >From Launchpad: https://bugs.edge.launchpad.net/ubuntu/+source/wine/+bug/208853 I have installed Source Insight, v3.50.0058 (http://www.sourceinsight.com), under Wine (0.9.58-0ubuntu2) under Hardy Beta. Source Insight is a code editor and browser. You can install a time-limited copy if you want. Anyway, having used this under Wine under Ubuntu for 18 months, with only a couple of niggly problems, I decided to upgrade (by doing a wipe + fresh install) to Hardy Beta. Since then, Source Insight has exhibited major problems. These all centre around NOT refreshing the screen after things happen: (1) Opening a new source-file window and moving it. Also resizing an existing window. (2) Minimising and then maximising the Source Insight window itself. In both cases, the screen inside the Source Insight window does not refresh. Moving the window around the screen does nothing (except get a nice swirly pattern of a repeating window title-bar inside the window itself. The only way I have found to cure the problem and make the window refresh itself is to switch to the second workspace, wait a few seconds (until the window with the "Go to left workspace ..." pops up) and then switch back. THEN the window refreshes. Sometimes. If it does not, switch to the other workspace again and wait longer before switching back. This is on a Dell D620 with an nVidia "G72M [Quadro NVS 110M/GeForce Go 7300]" and a second Dell 2007FP display attached. I'm running the graphics in TwinView mode (which means a manually configured xorg.conf, attached [see launchpad]). Going to System -> Preferences -> Appearance -> Visual Effects shows that "None" is currently active. --- The problem seems a LOT worse when running with the two displays and with the Source Insight window on the second (non-laptop) display. When running in single-display mode (i.e. at home instead of work), the "new source file window" problem does not seem to occur so much. The "minimising/maximising" problem occurs all the time, whatever the display being used. --- I believe the last version this worked with for this user was 0.9.46 (the one that came with Ubuntu Gutsy). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 33

[Bug 13839] New: Steam hangs in SteamStartup() attempting to connect to servers
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=13839 Summary: Steam hangs in SteamStartup() attempting to connect to servers Product: Wine Version: 1.0-rc4 Platform: All OS/Version: Solaris Status: UNCONFIRMED Severity: normal Priority: P2 Component: winsock AssignedTo: wine-bugs(a)winehq.org ReportedBy: trisk+winehq(a)acm.jhu.edu Created an attachment (id=13899) --> (http://bugs.winehq.org/attachment.cgi?id=13899) Gzipped output of WINEDEBUG=trace+relay wine Steam.exe Running Steam results in strange behaviour on Solaris and OpenSolaris. When Steam is first installed (using either the current MSI installer or an older standalone installer), it successfully updates itself and automatically restarts. , On restart, it spews extensive messages to the console about connection attempts to all 100+ CSDS servers with latency. For example, the last couple of lines are: CellID: Connecting to 87.248.209.212:27031. . . CellID: Connect to 87.248.209.212:27031 took 110 MS CellID: !! Got Cell ID 2 from server 69.28.153.90:27031 It then makes no further progress and appears to hang. If interrupted with Ctrl-C, it displays a "SteamStartup() failed" messagebox before exiting. When started again, Steam.exe prints set of "CellID:" messages showing that is is connecting to a particular server, then blocks for at least a minute, then connects to a different server. This goes on indefinitely. I'm attaching a WINEDEBUG=trace+relay log (to reduce log size, this Steam instance was interrupted after about 30 seconds). I can't do WINEDEBUG=trace+all because it results in an error message from Steam about being unable to load SteamUI.dll. This seems to be a network related issue, but I'm not entirely certain. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 17

[Bug 12045] New: foobar2000 0.9.4.4 - window close lag
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=12045 Summary: foobar2000 0.9.4.4 - window close lag Product: Wine Version: 0.9.57. Platform: PC URL: http://www.foobar2000.org/ OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: liquid.acid(a)gmx.net I have some mysterious lag when working with foobar2000 version 0.9.4.4 When having windows (opened by foobar2k itself) open, like the file property dialogue, or a file scan result window and I close this particular window SOMETIMES (not always) I have some serious lag. Which means I click the X-button, and at first nothing happens. Now I can do different things: 1) Sometimes moving the mouse around triggers window closing 2) Sometimes dragging the still open window around triggers closing 3) Pushing the X a second time sometimes does the trick I didn't notice this with wine-0.9.56, so it seems to be a regression. I'm still trying to figure out some actions to always reproduce the problem, but currently I'm not successful. This problem is not bound to CPU usage. It also appears when the CPU is idling at 99%. Gonna try a bisect, but as I know no way to accurately reproduce it... Someone with similar problems? Maybe not only fb2k? Thanks, Tobias -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 31

[Bug 9653] New: This game does not work under wine > 0.9.35 (regression)
by wine-bugs＠winehq.org 13 Jan '12

13 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=9653 Summary: This game does not work under wine > 0.9.35 (regression) Product: Wine Version: unspecified Platform: All URL: http://appdb.winehq.org/appview.php?iAppId=4869 OS/Version: All Status: UNCONFIRMED Severity: major Priority: P2 Component: test AssignedTo: wine-bugs(a)winehq.org ReportedBy: voker57(a)gmail.com See program's appdb page for details: http://appdb.winehq.org/appview.php?iVersionId=7968 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 23

[Bug 11343] New: WSAIoctl only partly implemented
by wine-bugs＠winehq.org 13 Jan '12

13 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=11343 Summary: WSAIoctl only partly implemented Product: Wine Version: 0.9.54. Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: winsock AssignedTo: wine-bugs(a)winehq.org ReportedBy: martin(a)hmailserver.com WSAIoctl is only partly implemented. When setting dwIoControlCode to SIO_GET_EXTENSION_FUNCTION_POINTER, WSAIoctl will result in WSAEOPNOTSUPP. This has the effect that hMailServer does not work under Wine. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 12

[Bug 12778] New: Progecad smart! crashes on save/save us
by wine-bugs＠winehq.org 02 Jan '12

02 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=12778 Summary: Progecad smart! crashes on save/save us Product: Wine Version: 0.9.60 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: marqoos(a)o2.pl Progecad smart! free to personal use autocad-like application ( http://www.progecad.com/compra/index.asp?left=progecad2008smart&lang=eng ) crashes when after opening a dwg file and then i'm trying to save it or save it us. Application succesfully saved new created file but only once (opening and saving it again crashes programm the same way). I'm not completly sure but i belive it's a regression error (as i remember saving option was ok around wine 0.9.54 but there was some other issues which had made the application not usable and i didn't really work with it, so i'm not sure). As reported in app db the same issue happen in pro version of programm. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 8

[Bug 11628] New: Gekkeiju Online: Bad audio sync/latency
by wine-bugs＠winehq.org 30 Dec '11

30 Dec '11

http://bugs.winehq.org/show_bug.cgi?id=11628 Summary: Gekkeiju Online: Bad audio sync/latency Product: Wine Version: 0.9.54. Platform: PC-x86-64 URL: http://appdb.winehq.org/objectManager.php?sClass=version &iId=10780 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: benjo316(a)hotpop.com Overview: Audio is handled or synced incorrectly, and "echos" the entire time while you play the game. Steps to Reproduce: 1) Open the program. 2) After the auto-updater finishes, start playing. 3) Listen to the sounds. Actual Results: What the application did after performing the above steps. Audio (music and effects) sounds like it is echoing(like in kobodeluxe when the latency/frequency is set incorrectly). Expected Results: Audio should play clearly. Additional Information: I currently cannot retest with version 0.9.55 on Ubuntu 8.04, because of a bug[1] that currently causes Wine to segfault. As soon as that bug is resolved I will come back with an account of if it runs on the latest version of wine(currently 0.9.55), and, if not, output from the console. Anyone else who can confirm or provide extra details is welcome to. [1] https://bugs.launchpad.net/ubuntu/+source/wine/+bug/191575 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 12

[Bug 11572] New: FrameMaker: Registration Dialog Blocks Execution
by wine-bugs＠winehq.org 30 Dec '11

30 Dec '11

http://bugs.winehq.org/show_bug.cgi?id=11572 Summary: FrameMaker: Registration Dialog Blocks Execution Product: Wine Version: 0.9.54. Platform: PC OS/Version: other Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: jimrorie(a)logisys.biz FrameMaker 8.0 displays a registration dialog that blocks execution. Several command line issues: fixme:mshtml:nsURI_Equals default action not implemented Seems to be related to the button operation. also... err:module:import_dll Library xmlparse.dll (which is needed by L"C:\\Program Files\\Quicken\\QWUTIL.dll") not found This error is seen in several adobe applications. Frame 7.2, 8.0 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 21

[Bug 12633] New: Windows Media Player 10 crashes on "Add to Library"
by wine-bugs＠winehq.org 30 Dec '11

30 Dec '11

http://bugs.winehq.org/show_bug.cgi?id=12633 Summary: Windows Media Player 10 crashes on "Add to Library" Product: Wine Version: CVS/GIT Platform: Other URL: http://download.microsoft.com/download/1/2/A/12A31F29- 2FA9-4F50-B95D-E45EF7013F87/MP10Setup.exe OS/Version: other Status: NEW Keywords: download Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com Setting up WPM10 went smoothly. The app started up, and asked if I wanted to scan folders for music. I told it to scan my Music folder, whereupon it promptly crashed with Unhandled exception: page fault on read access to 0x00000000 in 32-bit code (0x7d06b95f). Backtrace: =>1 0x7d06b95f IAutoComplete_fnInit+0xb2(iface=0xab1948, hwndEdit=0x20076, punkACL=0x0, pwzsRegKeyPath=0x0, pwszQuickComplete=0x0) [dlls/shell32/autocomplete.c:249] in shell32 (0x0033b584) 2 0x07601b83 in wmp (+0xf1b83) (0x0033b5a8) ... [dlls/shell32/autocomplete.c:249] in shell32: movl 0x0(%ecx),%edx 249 if (!SUCCEEDED (IUnknown_QueryInterface (punkACL, &IID_IEnumString, (LPVOID*)&This->enumstr))) { -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 17

[Bug 14052] New: CoreAudio driver broken
by wine-bugs＠winehq.org 30 Dec '11

30 Dec '11

http://bugs.winehq.org/show_bug.cgi?id=14052 Summary: CoreAudio driver broken Product: Wine Version: CVS/GIT Platform: PC OS/Version: Mac OS X 10.5 Status: UNCONFIRMED Severity: major Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: kyle.husmann(a)gmail.com Created an attachment (id=14264) --> (http://bugs.winehq.org/attachment.cgi?id=14264) Entire console output while running winecfg I cannot seem to get the CoreAudio driver to work. Sound is nonexistant, and it crashes winecfg: When trying to run winecfg, I click on the "audio" tab, and the winecfg window goes blank and the application stops responding. In the console, when I click the tab, I get the error: err:midi:CoreAudio_MIDIInit can't create wineMIDIClient Prior to clicking on the audio tab and crashing, I get the "err:midi:CoreAudio..." and a back trace. The entire output is attached. Here's the sequence of events in summary: I launch winecfg, and get the "err:midi:CoreAudio...", and a backtrace. Then, I click the audio tab, and I get another "err:midi:CoreAudio...", and the program without updating the window. In previous versions of wine (last I tried was 0.9.33), this did not happen, and sound output worked. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 29

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs June 2008